[ROM][PORT][UNOFFICIAL][kenzo/kate][11] LineageOS 18 [11-03-2021]

Search This thread

zamar27

Senior Member
Oct 20, 2016
55
3
Post are updated && issue fixed
Are you planning to fix Camera and Goodix FP issues? What about Face Unlock? Or it depends on new MiMax fixes? Pls update OS version & build info in your top (header) post each time you upload a new build and update its download link.
 
Last edited:

nasim7500

Member
Jul 27, 2019
19
3
Once I flashed this ROM, I launch it into the system, it immediately throws it into Fastboot mode!

At first I tried to flash the latest version with twrp. (I did it all by instrumentation. The effect is the same!)
And then I switched from twrp to ofrp, using the earlier version ofrp. (I did it all by instrumentation. The result is zero!)

My kenzo phone with 2gb RAM.
Try to flashing twrp backup rom, download it from this post additional guide..
 

QantivirusP

Member
Mar 15, 2021
5
2
Try to flashing twrp backup rom, download it from this post additional guide..
Well, I was flashing the ROM through a backup copy. First, I tried the last one with twrp, then I did the same, but through ofrp! Therefore, it does not start everything into the system b in Fastboot mode right away!

Well, what other options are there for installing ROMs?
 

nasim7500

Member
Jul 27, 2019
19
3
Well, I was flashing the ROM through a backup copy. First, I tried the last one with twrp, then I did the same, but through ofrp! Therefore, it does not start everything into the system b in Fastboot mode right away!

Well, what other options are there for installing ROMs?

Well, I was flashing the ROM through a backup copy. First, I tried the last one with twrp, then I did the same, but through ofrp! Therefore, it does not start everything into the system b in Fastboot mode right away!

Well, what other options are there for installing ROMs?
Flash again twrp backup Rom next flash any a10 kernel imidietlly then reboot device && check,,
 

QantivirusP

Member
Mar 15, 2021
5
2
Use orangefox letest version or zcx twrp
Installed this ROM from a backup. As I understand it, it was necessary to throw this ROM backup into the internal storage, and not the external storage, well, everything seems to work fine.

We are waiting for fixes in new assemblies! Well, most likely that you will work in normal a11 source for kenzo & kate, and not on ports!
 
  • Like
Reactions: nasim7500

sainivilakshan

New member
Mar 21, 2021
1
1
The only guy who have made the android 11 for redmi note 3
Pros:-
Can actually feel and enjoying the android 11 on kenzo. Thank you so much :)
Cons:-
Camera is crashing. Other camera apps also not working ( hoping to get this issue fixed in future)
 
  • Like
Reactions: nasim7500

nasim7500

Member
Jul 27, 2019
19
3
Installed this ROM from a backup. As I understand it, it was necessary to throw this ROM backup into the internal storage, and not the external storage, well, everything seems to work fine.

We are waiting for fixes in new assemblies! Well, most likely that you will work in normal a11 source for kenzo & kate, and not on ports!
Thank you so much,, i will try♥️♥️
 
  • Like
Reactions: Kkritoo

QantivirusP

Member
Mar 15, 2021
5
2
The most unpleasant thing about this firmware. The battery starts to get very hot up to 43 degrees, and the board itself on the phone gets very hot up to 65 degrees.

I don't know how it was connected ?! I have such a feeling that the phone from this firmware can explode.

UPD: If anything else I'm testing.
 
  • Like
Reactions: nasim7500

nasim7500

Member
Jul 27, 2019
19
3
The most unpleasant thing about this firmware. The battery starts to get very hot up to 43 degrees, and the board itself on the phone gets very hot up to 65 degrees.

I don't know how it was connected ?! I have such a feeling that the phone from this firmware can explode.

UPD: If anything else I'm testing.
Thnx for your report, i will try to fix this issue
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Could you please tell me that how did you reduced the img size? I'm facing at the same error says
    update process ended with error 1.
    Install Ubuntu os on a VM, copy img file you converted over there.
    On terminal browse to location where you saved img and run commands:
    e2fsck -f -y system.img
    resize2fs -M system.img
    Copy img from Ubuntu to computer and then phone. (I used internet, couldn't understand how to copy directly)
    From recovery:
    flash system.img to system partition.
    Reboot to recovery.
    Mount system partition,
    Resize system partition.
    Install gapps.

    Dont forgot to flash boot.img to boot partition as well.

    Regards,
    1
    Lineage-OS.jpg





    Lineage-os 18 for Redmi Note 3 pro, ported from Mi Max by @nasim7500



    What's working:
    ----------------
    Boot
    Bluetooth
    GPS
    RIL
    WiFi
    WiFi Hotspot
    USB (ADB/MTP)
    Video Playback
    Touch
    Sensors

    Bugs:
    -------
    Camera
    Fingerprint
    Some hidden bug there maybe, not sure


    Installation instructions:
    ---------------------------
    Download Rom zip
    Install a compatible Recovery (orangeFox recomended)
    Perform a NANDroid backup of your current ROM (Optional)
    Wipe system / data / cache partitions
    Flash ROM.
    Optional: Install the NikGapps-basic-arm64-11.
    Optional: Install Magisk for Root.



    Special thanks to these guys (who helped me personally)
    Without them we wouldn't have seen this rom
    ----------
    @MrJarvis698, @trax85



    NOTE:
    •We are not responsible for bricked devices, dead sdcard, etc
    •If you find any other bug you can tell me, I will try to fix but no promises
    If you found any error when flashing this rom then follow additional guide otherwise skip it
    •This is my first post in xda so if somthing i wrong then tell me


    SCREENSHOTS:


    ROM Download Link:
    ------------------
    Rom: https://mega.nz/file/gfIiABDJ#iy4DaPOR4HZ9TdKr_c3m5qTnaHUh3HJQzGnJp_dd62M

    gapps: https://mega.nz/file/xCASRRIT#TBMvT61pser4xiqDghaFbnQKuCORS9eMn_IRv_YCgWA






    ADDITIONAL GUIDE:

    1. Download twrp backed up ROM

    2. Extract it && read "readme.txt" file

    3. All done now enjoy!!

    Link:
    https://mega.nz/file/9PJBQIpI#kaGMCDQpWNP8j8t0jVtxC5_QKHFnDihxmtYST0RRzdY





    Rom ported by nasim7500.

    And Last i Want to say Thank you so much from my heart for All Kenzo dev for your hard & awseome Work...
    1
    Nice work bro..👌👌👌👌
    1
    I was able to reduce img file size using Ubuntu and flash it. Then resized system partition.

    Thank you for Android 11 on Kenzo.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone