Development [ROM][PREVIEW][sake][13] StatiXOS v6.0

Search This thread

Androbots

Recognized Developer
Dec 8, 2014
989
748
sourajitk.github.io

stx-2022.png


StatiXOS for ASUS ZenFone 8 (sake)


What is StatiXOS?

StatiXOS is a custom ROM based on the Android Open Source Project aiming to be minimal while providing quality of life improvements and up to date security patches.


SafetyNet doesn't pass for now
SELinux is permissive
ASUS Camera needs an update officially from ASUS to work right. Use Wichaya's GCam for now.


Flashing the fastbootimage
1. Download the fastbootimage from our download link above
2. Reboot your ZenFone 8 to bootloader and plug it in to your computer
3. Now open up your Terminal (macOS and Linux) or Command Prompt (Windows)
4. Type in fastboot reboot fastboot

5. Now locate the downloaded ROM zip and drag it into the shell window you opened in step 3 after typing fastboot update.
5. From here on, it will be automated. Once the device reboots, you're good to go!

Flashing an OTA package
1. Download the ROM which should be in the root of the sake folder.
2. Navigate to boot images within the sake folder and download the two images boot.img and vendor_boot.img.
3. Reboot your device to its bootloader mode, open up a terminal window and flash boot and vendor_boot using fastboot flash.
4. Once done, type in fastboot reboot recovery.
5. once you boot to recovery, tap on “Apply from ADB”
6. Now on your PC, type in adb sideload and drag the zip you downloaded in Step 1.
7. Wait for it to complete flashing. Once done, wipe data/cache (don’t if you’re dirty flashing)
8. Done!



Prerequisite firmware: 31.1010.0411.122
Android version: 13.0.0
Linux Kernel Version: 5.4.210
Source code: GitHub
Code Review: Gerrit
 

Attachments

  • Screenshot_20221002-001449.png
    Screenshot_20221002-001449.png
    749.5 KB · Views: 272
  • Screenshot_20221002-001435.png
    Screenshot_20221002-001435.png
    1.1 MB · Views: 278
  • Screenshot_20221002-001445.png
    Screenshot_20221002-001445.png
    553.9 KB · Views: 284
  • Screenshot_20221002-001457.png
    Screenshot_20221002-001457.png
    151.6 KB · Views: 280
Last edited:

dar12ek

Member
Dec 2, 2014
26
6
I installed it works fine, but I only have 4 columns on the desktop how to change it. Thanks to a solid job.

1.png
 

TheManNoPlan

New member
Oct 3, 2022
2
4
Hello can you explain how you managed to install magisk?
Just download the APK from their GitHub page, change the extension from .apk to .zip. Now boot into recovery, hit system update and adb sideload; finally type "adb sideload Magisk-v25.2.zip" it'll say it's not verified and ask if you want to install anyways, just hit yes. It'll boot into system, then you'll need to enable zygisk and reboot and install universal safetynet fix and magiskhide props config to pass safetynet and have gpay/banking work. That's the easiest method for me personally.

Safetynet fix: https://github.com/kdrag0n/safetynet-fix

Magiskhide:
 

zenaufa

Senior Member
May 9, 2011
121
45
Jakarta
Been using this ROM as daily driver since Friday, and so far everything is great :D

Whatsapp is working smoothly, ASUS cam still have issue ofc, but vicahya Gcam works smoothly in this ROM. Managed to pass safetynet as well thanks to the guide from @TheManNoPlan

I think i'll keep using this ROM as my daily driver :)

Thank you Androbots for all of your hardwork 🙏
 

Attachments

  • Screen Shot 2022-10-09 at 00.34.40.jpg
    Screen Shot 2022-10-09 at 00.34.40.jpg
    57.5 KB · Views: 52

ibolito

Senior Member
Jun 4, 2010
294
107
Marseille
ASUS ZenFone 8
Just download the APK from their GitHub page, change the extension from .apk to .zip. Now boot into recovery, hit system update and adb sideload; finally type "adb sideload Magisk-v25.2.zip" it'll say it's not verified and ask if you want to install anyways, just hit yes. It'll boot into system, then you'll need to enable zygisk and reboot and install universal safetynet fix and magiskhide props config to pass safetynet and have gpay/banking work. That's the easiest method for me personally.

Safetynet fix: https://github.com/kdrag0n/safetynet-fix

Magiskhide:
Thank you very much I managed to install magisk and got my bank apps working now. But I still can't use Google Wallet, can't add my debit card it says that my phone is rooted. Tried to hide every Google and framework related services from magisk hide but still doesn't work even after clearing data of Google apps and reboot. Any idea ?
 

ibolito

Senior Member
Jun 4, 2010
294
107
Marseille
ASUS ZenFone 8
October 2022 SPL builds are up!

Changelog:
- Hide Now Playing and System Updates in Settings as they're not applicable to this device
- You can now edit photos using Google Photos.

Link: https://downloads.statixos.com/13-TIRAMISU/
Congrats for this awesome ROM hands down the smoothest thing I ever used. But I have one question I don't have Google pixel's weather widgets that I used to have on the Android 12 version. Is it normal ?
 

Androbots

Recognized Developer
Dec 8, 2014
989
748
sourajitk.github.io
New release is now up!

Changelog:
- Fixed an issue that would kick the user occasionally to a rescue party screen that asked them to factory reset their devices.
- Update blobs to the latest stock release
- SafetyNet and Play Integrity pass by default now. You don't need to install Magisk
- Merge LAHAINA 20700 into the kernel
- Builds are now forced to -user
- Ship partner modules and Pixel 7 Pro GMS
- Extent the Internet tile behavior to Bluetooth - you can now quickly access your recently paired Bluetooth devices directly from QS!
- Add Status Bar Icon manager can be found under Display

Download: https://downloads.statixos.com/13-TIRAMISU/sake/fastbootimages/
 

Attachments

  • Screenshot_20221029-204853.png
    Screenshot_20221029-204853.png
    65.3 KB · Views: 66
  • Screenshot_20221030-001436.png
    Screenshot_20221030-001436.png
    161.1 KB · Views: 64
  • Screenshot_20221029-154816.png
    Screenshot_20221029-154816.png
    122.7 KB · Views: 57
  • Screenshot_20221029-140132.png
    Screenshot_20221029-140132.png
    94.4 KB · Views: 57
Last edited:

skothiya

Senior Member
May 5, 2014
81
7
ASUS ZenFone 8
New release is now up!

Changelog:
- Fixed an issue that would kick the user occasionally to a rescue party screen that asked them to factory reset their devices.
- Update blobs to the latest stock release
- SafetyNet and Play Integrity pass by default now. You don't need to install Magisk
- Merge LAHAINA 20700 into the kernel
- Builds are now forced to -user
- Ship partner modules and Pixel 7 Pro GMS
- Extent the Internet tile behavior to Bluetooth - you can now quickly access your recently paired Bluetooth devices directly from QS!
- Add Status Bar Icon manager can be found under Display

Download: https://downloads.statixos.com/13-TIRAMISU/sake/fastbootimages/
@Androbots
bug: can't edit photos with google photos.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    New release!

    - Fixed Google Photos editing
    - Merged Nov 2022 SPL

    Download: https://downloads.statixos.com/13-TIRAMISU/
    1
    New release!

    - Fixed Google Photos editing
    - Merged Nov 2022 SPL

    Download: https://downloads.statixos.com/13-TIRAMISU/
    Can confirm that google photos editing is working now, thank you so much for all of your hardwork :D
  • 8

    stx-2022.png


    StatiXOS for ASUS ZenFone 8 (sake)


    What is StatiXOS?

    StatiXOS is a custom ROM based on the Android Open Source Project aiming to be minimal while providing quality of life improvements and up to date security patches.


    SafetyNet doesn't pass for now
    SELinux is permissive
    ASUS Camera needs an update officially from ASUS to work right. Use Wichaya's GCam for now.


    Flashing the fastbootimage
    1. Download the fastbootimage from our download link above
    2. Reboot your ZenFone 8 to bootloader and plug it in to your computer
    3. Now open up your Terminal (macOS and Linux) or Command Prompt (Windows)
    4. Type in fastboot reboot fastboot

    5. Now locate the downloaded ROM zip and drag it into the shell window you opened in step 3 after typing fastboot update.
    5. From here on, it will be automated. Once the device reboots, you're good to go!

    Flashing an OTA package
    1. Download the ROM which should be in the root of the sake folder.
    2. Navigate to boot images within the sake folder and download the two images boot.img and vendor_boot.img.
    3. Reboot your device to its bootloader mode, open up a terminal window and flash boot and vendor_boot using fastboot flash.
    4. Once done, type in fastboot reboot recovery.
    5. once you boot to recovery, tap on “Apply from ADB”
    6. Now on your PC, type in adb sideload and drag the zip you downloaded in Step 1.
    7. Wait for it to complete flashing. Once done, wipe data/cache (don’t if you’re dirty flashing)
    8. Done!



    Prerequisite firmware: 31.1010.0411.122
    Android version: 13.0.0
    Linux Kernel Version: 5.4.210
    Source code: GitHub
    Code Review: Gerrit
    6
    New release!

    - Fixed Google Photos editing
    - Merged Nov 2022 SPL

    Download: https://downloads.statixos.com/13-TIRAMISU/
    3
    New release is now up!

    Changelog:
    - Fixed an issue that would kick the user occasionally to a rescue party screen that asked them to factory reset their devices.
    - Update blobs to the latest stock release
    - SafetyNet and Play Integrity pass by default now. You don't need to install Magisk
    - Merge LAHAINA 20700 into the kernel
    - Builds are now forced to -user
    - Ship partner modules and Pixel 7 Pro GMS
    - Extent the Internet tile behavior to Bluetooth - you can now quickly access your recently paired Bluetooth devices directly from QS!
    - Add Status Bar Icon manager can be found under Display

    Download: https://downloads.statixos.com/13-TIRAMISU/sake/fastbootimages/
    3
    Hello can you explain how you managed to install magisk?
    Just download the APK from their GitHub page, change the extension from .apk to .zip. Now boot into recovery, hit system update and adb sideload; finally type "adb sideload Magisk-v25.2.zip" it'll say it's not verified and ask if you want to install anyways, just hit yes. It'll boot into system, then you'll need to enable zygisk and reboot and install universal safetynet fix and magiskhide props config to pass safetynet and have gpay/banking work. That's the easiest method for me personally.

    Safetynet fix: https://github.com/kdrag0n/safetynet-fix

    Magiskhide:
    3
    October 2022 SPL builds are up!

    Changelog:
    - Hide Now Playing and System Updates in Settings as they're not applicable to this device
    - You can now edit photos using Google Photos.

    Link: https://downloads.statixos.com/13-TIRAMISU/