[ROM][PrimoC][CDMA][NIGHTLIES][4.2.x] CyanogenMod 10.1 Unofficial[DISCONTINUED]

Search This thread

rukin5197

Senior Member
Jul 26, 2011
838
797
iiAeqEtmaEaTK.png

Screenshot_2013-01-25-12-04-08_zps3fd5e75e-1_zps8e206e46.jpg
Screenshot_2013-01-25-12-03-45_zpsbe51cd7d-1_zps966ead42.jpg
Screenshot_2013-01-25-12-05-04_zps6a824c92-1_zpsd9d82aa6.jpg
Screenshot_2013-01-25-12-04-29_zpsbaef1d62-1_zps37c93881.jpg



CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2.x (JB), which is designed to increase performance and reliability over stock Android for your device.

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 *
 * Submitting bug reports on nightly builds is the leading 
 * cause of male impotence.
 */

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

Githubs:

Changelogs:

Donations:
  • codefi.re (use the donation button at the bottom of the page)
  • Mustaavalkosta
  • Rukin5197- (Use "Donate To Me" underneath my avatar")

Flashing Instructions

Fresh installation instructions:
  1. Download Nightlies
  2. Download gapps (goo.im/gapps)
  3. Put the files on SD card.
  4. Reboot to recovery.
  5. Do factory reset (ie. format /data, /cache, /sd-ext and /sdcard/.android_secure)
  6. Flash cm-10.1-xxxxxxxx-UNOFFICIAL-primoc.zip
  7. Flash gapps-jb-xxxxxxxx-signed.zip
  8. Reboot into bootloader
  9. fastboot flash boot boot.img (Grab the one from the ROM zip)
  10. Reboot and enjoy.

Update installation instructions:
  1. Download Nightlies
  2. Put the file on SD card.
  3. Reboot to recovery.
  4. Format /cache
  5. Flash cm-10.1-xxxxxxxx-UNOFFICIAL-primoc.zip
  6. No need to flash gapps as CM backuptool script should take care of them.
  7. Reboot and enjoy.

Status

Not working (In order of importance):
- 5mp Camera/720p Video Recording (On Native camera app)
- Lockscreen glitches and random reboots upon unlock

GooManager Support
My ROMs now have GooManager OTA support, so when I release a new update, it will tell you via notification. All you need to do is go into Play Store and download the GooManager app and everything will take over from there. :)

Q&A:

Q: I have not read the OP, but I have this issue
A: If it is already listed in the OP as an issue, please don't add to the thread. Read first por favor

Q: I hate you for not fixing this issue X!!!
A: I love you too.

Q: Where are my developer and performance options?
A: http://goo.gl/jpS8r

Q: How about them Ravens right guys?!.
A: Leave.

Guys don't download the latest build just yet. I'm still figuring out the kinks
 
Last edited:

rukin5197

Senior Member
Jul 26, 2011
838
797
Credits:
simonsimons34 for the kernel
beyond for getting it booted/fixing a lot of things
Lloir for helping as well
jmz for the device tree start
CyanogenMod team
sellers86 for helping me pass a very tedious error
|0xD34D| for basically mentoring me
Rohan32 for giving me all his findings
Andromadus/CodeFireX guys for giving me bases and advice
Mustaavalkosta for the local_manifest.xml


Changelog:
Code:
[B]2-10-2013-[/B] Back to the CM10.1 base, Fix native camera app, now better performance/stability
[B]2-8-2013-[/B] New Andromadus base. Fix Camera/Camcorder/PlayStore
[B]2-5-2013-[/B] New PMEM kernel, 
[B]2-4-2013-[/B] First ION build, updated OP
[B]1-27-2013-[/B] WiFi Fixed
[B]1-25-2013-[/B] Initial Release
 
Last edited:

bradthomas127

Senior Member
Nov 6, 2012
225
325
Ft. Wayne
wp-ultra.com
Thank you Rukin, your a beast... Backing up my SD right now. will flash in a sec. and let you know about WIFI.

Edit:
No just sits at turning WIFI on. very smooth though, i like the statusbar and transitions.
 
Last edited:

jcru53

Senior Member
Jun 21, 2011
62
12
Denver
Running newest nightly, no wifi. Also, SD card will not mount. I am using the 1-27 build with its internal boot.img. I did a total clean reflash.
 
Last edited:

jcru53

Senior Member
Jun 21, 2011
62
12
Denver
Flashed provided boot.img and SD problem went away, but still no wifi. Attached logcat.
 

Attachments

  • alogcat.2013-01-27-00-59-19-0700.txt
    89.4 KB · Views: 55
Feb 3, 2008
8
3
This is a beautiful piece of work, Rukin.

I have encountered a slight annoyance and I am curious if anyone has experience with this but last night, when I went to search for the update, it was unable to find it. I originally did this through the "About Phone" section of the settings and then tried it through ROM Manager and it didn't even execute a search at all. I've searched the forums to see if this is a common problem since this is my first experience with nightly builds but did not have any luck, likely because of the quite-common key words of my search.

Anyone have some ideas or is this a corner that needs polished still in this build and it isn't special to just me?
 

rukin5197

Senior Member
Jul 26, 2011
838
797
This is a beautiful piece of work, Rukin.

I have encountered a slight annoyance and I am curious if anyone has experience with this but last night, when I went to search for the update, it was unable to find it. I originally did this through the "About Phone" section of the settings and then tried it through ROM Manager and it didn't even execute a search at all. I've searched the forums to see if this is a common problem since this is my first experience with nightly builds but did not have any luck, likely because of the quite-common key words of my search.

Anyone have some ideas or is this a corner that needs polished still in this build and it isn't special to just me?

You're going to need to download the GooManager app off the Play Store. I have not made this ROM compatible with the GooManager app though, but thanks for reminding me as I will implement it into the next update :)

Also for all the people wondering: I have just about fixed AOKP up to date with this ROM, so I will be releasing that today :)
 
Feb 3, 2008
8
3
Yes but I would also try a full wipe if it doesn't work. It worked for me

Unfortunately I ended up trying a full system wipe and reinstall and it still didn't work. Thank you for your persistence in figuring this out.

I should also mention since it seems relevant at this point that is says my radio is .0521_2 so there is no problem there.

---------- Post added at 05:52 PM ---------- Previous post was at 05:36 PM ----------

Unfortunately I ended up trying a full system wipe and reinstall and it still didn't work. Thank you for your persistence in figuring this out.

I should also mention since it seems relevant at this point that is says my radio is .0521_2 so there is no problem there.

Some other things I have noticed from poking around. It does not allow me to slide the Wi-Fi button to on most of the time. It's not even active EXCEPT for when I go into Advanced and go to specify a region code. Europe is the default so I set it to United States and 60-90 seconds later, I am able to move the Wi-Fi slider to on. It never actually turns blue to indicate it is on, nor does it turn on, but I am able to slide it over. When I go back to advanced and region code, it has reverted back to Europe.

I doubt this helps at all but I know it's good to have as much information as possible.
 
Last edited:

aaronrw

Senior Member
Nov 16, 2011
1,287
378
A TOWN!
Okay, try the next download. I'm getting tired of this :)

Please don't consider this a "needless" post. Rukin you are a well respected DEV and all around good guy here and please don't abandon your efforts due to some off the wall remarks. At that thanks for ALL your contributions thus far sorry if I clogged the thread;)
 
  • Like
Reactions: rukin5197

Top Liked Posts

  • There are no posts matching your filters.
  • 23
    iiAeqEtmaEaTK.png

    Screenshot_2013-01-25-12-04-08_zps3fd5e75e-1_zps8e206e46.jpg
    Screenshot_2013-01-25-12-03-45_zpsbe51cd7d-1_zps966ead42.jpg
    Screenshot_2013-01-25-12-05-04_zps6a824c92-1_zpsd9d82aa6.jpg
    Screenshot_2013-01-25-12-04-29_zpsbaef1d62-1_zps37c93881.jpg



    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2.x (JB), which is designed to increase performance and reliability over stock Android for your device.

    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     * Submitting bug reports on nightly builds is the leading 
     * cause of male impotence.
     */

    CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    Githubs:

    Changelogs:

    Donations:
    • codefi.re (use the donation button at the bottom of the page)
    • Mustaavalkosta
    • Rukin5197- (Use "Donate To Me" underneath my avatar")

    Flashing Instructions

    Fresh installation instructions:
    1. Download Nightlies
    2. Download gapps (goo.im/gapps)
    3. Put the files on SD card.
    4. Reboot to recovery.
    5. Do factory reset (ie. format /data, /cache, /sd-ext and /sdcard/.android_secure)
    6. Flash cm-10.1-xxxxxxxx-UNOFFICIAL-primoc.zip
    7. Flash gapps-jb-xxxxxxxx-signed.zip
    8. Reboot into bootloader
    9. fastboot flash boot boot.img (Grab the one from the ROM zip)
    10. Reboot and enjoy.

    Update installation instructions:
    1. Download Nightlies
    2. Put the file on SD card.
    3. Reboot to recovery.
    4. Format /cache
    5. Flash cm-10.1-xxxxxxxx-UNOFFICIAL-primoc.zip
    6. No need to flash gapps as CM backuptool script should take care of them.
    7. Reboot and enjoy.

    Status

    Not working (In order of importance):
    - 5mp Camera/720p Video Recording (On Native camera app)
    - Lockscreen glitches and random reboots upon unlock

    GooManager Support
    My ROMs now have GooManager OTA support, so when I release a new update, it will tell you via notification. All you need to do is go into Play Store and download the GooManager app and everything will take over from there. :)

    Q&A:

    Q: I have not read the OP, but I have this issue
    A: If it is already listed in the OP as an issue, please don't add to the thread. Read first por favor

    Q: I hate you for not fixing this issue X!!!
    A: I love you too.

    Q: Where are my developer and performance options?
    A: http://goo.gl/jpS8r

    Q: How about them Ravens right guys?!.
    A: Leave.

    Guys don't download the latest build just yet. I'm still figuring out the kinks
    17
    Update for this ROM guys is that I've gotten it to where it is coming out with WiFi not working, and I just need to push modules and it will work. Once I can get it to build the modules, I will start pushing out more nightlies. Still working hard, so don't lose hope :)

    Also, me and beyond have been working on camera lately. Might have a fix for that soon
    7
    same here

    LOL I'm so sorry guys, I've been holding out on your guys :)
    I forgot to put in beyond's wifi modules. If any of you guys have beyond's builds, just take his /system/lib/modules and put them in yours. I'm going to put them into the build for the next release.

    Sincere Apologies
    7
    Are any other ROMs stable(r) does anyone know what's causing the lock screen bug?

    Sent from my One V using Tapatalk 2

    The lockscreen bug is caused by a kernel issue. The framebuffer is trying to use a triple-buffer and it's not supported by our device. Therefore it's causing issues. We believe with the KangBang kernel, the issues will resolve themselves. This is the reason we're waiting on the new kernel

    This might not all be 100% correct, but it's what I've gathered from developing this so far
    7
    Okay, so WiFi works with the new ION Kernel, alas every thing else is broken. And by that, I mean sound and the wifi option in Settings disappeared (weirdly). My guess is it has to do with the ION running out of memory, but that's just a prediction.

    I'm currently trying to build Andromadus as it is more made for our device (or 7x30 devices). Let's see if I can actually get somewhere with it.