[ROM] Pure Stock v2.0 [Xperia Z1]

Beetle84

Recognized Contributor
Oct 24, 2013
2,274
1,269
183
Hervey Bay
I installed pure stock minimum as new Rom... Fresh installing but I have two issues
1- when I open language sittings it will force close the sittings
2- I can't add Google account... It says try again later.

Sent from my C6903 using xda app-developers app
The link to download gapps to fix the playstore issue is on Page 22

The link for the language and input problem is on Page 21
I copied to priv-app using root browser and it works.
I did install apk normally but it reset after a reboot
 
Last edited:
  • Like
Reactions: Evgeny_rr

ntzntz

Senior Member
May 4, 2012
72
3
0
Hello. My camera does not focus and does nothing just freeze once i press the camera button or in app button to take a picture.
What are the steps i need to take. I saw in the first post i need to flash the kitkat tft and then install the rom again.
But what are the steps. I just flash the tft and then directly install the pure stock 2.0 rom again?
Please provide me some steps to to that. I mean i need to do something specific or just flash. wait to load .. then shut down the phone in recovery and install pure stock? That`s all?
 

Ahki767

Senior Member
Sep 14, 2013
371
152
0
CAT
Hello. My camera does not focus and does nothing just freeze once i press the camera button or in app button to take a picture.
What are the steps i need to take. I saw in the first post i need to flash the kitkat tft and then install the rom again.
But what are the steps. I just flash the tft and then directly install the pure stock 2.0 rom again?
Please provide me some steps to to that. I mean i need to do something specific or just flash. wait to load .. then shut down the phone in recovery and install pure stock? That`s all?
Yes that's all you have to do. Go back to stock .757 and then flash the rom.zip
 

mamatkool

Member
Feb 22, 2013
42
3
0
Kuala Lumpur



Addons Pack:


The Addons Pack has everything in the Aroma Version except the ROM itself. It is being provided for Minimal and Official Versions because they do not have anything from Aroma Version included in them. So, In case if someone wants to install something from Aroma Version, He/She should use the Addons Pack and as its based on Aroma to, so naturally He/She will have all the options with what to install and what not. This Pack will not only work with my ROM, or any other Stock Based ROM alone, it will work with all other ROMs too (Ofcourse, The ones that support the Included Kernels).

@iHackers... where's the download link for this addon? can't find anywhere in this thread...
 

ntzntz

Senior Member
May 4, 2012
72
3
0
My version is 1276-9897 at the end what tft can i use because i saw you put .747 but the only .757 is : C6903 14.3.A.0.757 Central Europe 3 1276-4314_R1C and the closest one with the same code at finish is : C6903 14.3.A.0.681 Generic NCB 1276-9897. Does it matter witch one i use? Thank you
 

ntzntz

Senior Member
May 4, 2012
72
3
0
I have tried to update my version from Pure Stock v1.1 to Pure Stock v2.0 i have done this :

Copy the ROM to External SDCard.
Flash iHackers Advanced Stock Kernel.
Reboot into Recovery.
Make Sure to do a Wipe Data/Factory Reset before Installing the ROM.
Start the Installation. (Install Zip >> Choose Zip for External SDCard).
Switch Off Your Phone (Do Not Reboot). Select No to Disable Flash Recovery Confirmation.
Skip to the Last Step if you are already on Firmware - 14.3.A.0.757.
Install Kernel.ftf for C6903 (.757) or Kernel.ftf for C6902 (.757) with Flashtool to get compatible Kernel and Baseband.
Reboot and Enjoy.

Now i have gotten some problems with my camera and the fix was to : In case someone runs into Camera Issues, Flash the Full Kitkat FTF first and then Install the ROM.
I have taken this one to flash on my Z1 : C6903 14.3.A.0.757 Central Europe 3 1276-4314_R1C after this all have gotten bad.

I have lost ROOT / TWRP / And i am stuck on C6903 14.3.A.0.757 Central Europe 3 1276-4314_R1C

After that i have searched in the forum and found that i must use NUT stripped stock and zip and the tft file but because i already lost recovery i cannot use it.
In my head i thought i must install Recovery again. But of course i got another error when i tried to use the installer from NUT to get -=[XZDualRecovery]=-

THis is the error :
ro.build.product=C6903
ro.build.id=14.3.A.0.757
setsockopt() failed: Bad address.
this device is not supported.
kallsyms_addresses search failed.

What i am doing wrong please someone put me on the right track again.
 
Last edited:

snigglets

Senior Member
Jan 2, 2012
56
6
0
Hey as youvhavr lost your root my advice is
1.go back to. 534 ftf for C6903 official..flash with flashtool
2.root it with vroot
3.install xzdual recovery
4.install. 757 official ftf of official region if you have unlocked your bootloader or else flash nuts. 757 ftf
Then wipe data and factory reset
5.flash the rom of your choice

Sent from my C6903 using xda app-developers app
 
  • Like
Reactions: ntzntz

gkassar

Senior Member
Sep 23, 2011
185
70
0
Beirut
www.gkassar.com
coming from CM11

i'm on CM11 latest nightly, but I want to go back to stock based rom & i really like the Minimal version
I'm rooted with unlocked boot-loader, but I don't really think the steps in the OP fit my case (coming from CM11)
plz any help is appreciated
thanks in advance
 

Paradelle

Senior Member
Oct 13, 2013
189
104
0
Scotland
i'm on CM11 latest nightly, but I want to go back to stock based rom & i really like the Minimal version
I'm rooted with unlocked boot-loader, but I don't really think the steps in the OP fit my case (coming from CM11)
plz any help is appreciated
thanks in advance
Not sure what the OP say, but this is my default ROM. It's fast and responsive.

As for install, this is what I do everytime:

Full wipe, install ROM, install banks gapps, install super su, install doomkernal (version 18)

I run it OC to 2.4, with thermal throttle off. I get 48 hours with around 4-5 screen on time. It's lovely.
 
  • Like
Reactions: gkassar

gkassar

Senior Member
Sep 23, 2011
185
70
0
Beirut
www.gkassar.com
Not sure what the OP say, but this is my default ROM. It's fast and responsive.

As for install, this is what I do everytime:

Full wipe, install ROM, install banks gapps, install super su, install doomkernal (version 18)

I run it OC to 2.4, with thermal throttle off. I get 48 hours with around 4-5 screen on time. It's lovely.

1st thanks for ur prompt feedback

based on yr saying "...for install, this is what I do everytime" plz confirm if the below steps are TESTED & WORKING JUST FINE

1) ur were on CM / AOSP (...) whatever ROM which is NOT based on Stock Sony firmware
2) u boot into CWM recovery & do a Full Wipe
3) flash iHacker's xperia-z1-pure-stock-minimal.zip
4) flash latest Gapps
5) flash Chainfire's latest SuperSU
6) flash DooMLoRD's latest DooMKernel (v20)
7) reboot & tune it to ur preference

is the above correct / i won't get any bootloop or so (i'm very skeptical :p) especially that i couldn't find any post from someone flashing this ROM coming from a CM / AOSP based roms

thanks a lot in advance
 
Last edited:

Linux4ever85

Senior Member
Sep 7, 2012
184
16
38



1st thanks for ur prompt feedback

based on yr saying "...for install, this is what I do everytime" plz confirm if the below steps are TESTED & WORKING JUST FINE

1) ur were on CM / AOSP (...) whatever ROM which is NOT based on Stock Sony firmware
2) u boot into CWM recovery & do a Full Wipe
3) flash iHacker's xperia-z1-pure-stock-minimal.zip
4) flash latest Gapps
5) flash Chainfire's latest SuperSU
6) flash DooMLoRD's latest DooMKernel (v20)
7) reboot & tune it to ur preference

is the above correct / i won't get any bootloop or so (i'm very skeptical :p) especially that i couldn't find any post from someone flashing this ROM coming from a CM / AOSP based roms

thanks a lot in advance
For me to be safe. I would flash the stock rom ftf file over CM/AOSP then follow the steps from the first post.
 
  • Like
Reactions: gkassar

Paradelle

Senior Member
Oct 13, 2013
189
104
0
Scotland



1st thanks for ur prompt feedback

based on yr saying "...for install, this is what I do everytime" plz confirm if the below steps are TESTED & WORKING JUST FINE

1) ur were on CM / AOSP (...) whatever ROM which is NOT based on Stock Sony firmware
2) u boot into CWM recovery & do a Full Wipe
3) flash iHacker's xperia-z1-pure-stock-minimal.zip
4) flash latest Gapps
5) flash Chainfire's latest SuperSU
6) flash DooMLoRD's latest DooMKernel (v20)
7) reboot & tune it to ur preference

is the above correct / i won't get any bootloop or so (i'm very skeptical :p) especially that i couldn't find any post from someone flashing this ROM coming from a CM / AOSP based roms

thanks a lot in advance
Yes. That's what I did. Lots of times from lots of roms. I'm on doomkernel V18 I though. I didn't have any problems at all. All our phones are slightly different though I guess, so do what is best and safest though yo
 
  • Like
Reactions: gkassar

jontr

Senior Member
Jan 12, 2012
226
53
0
Youghal
great ROM, great battery life, but is it only me that's getting Force Close error for Settings when I try to go to Language & Input and/or change manually Sync Options for Google account? apart from these 2 oddities - it's very stable release, even better than Sony's stock one I was using before.