[ROM][PX3][2GB][Android 7.1.2] Malaysk ROMs for any yet known MTCD-MTCE Device

[navigtoor]

Please can we go back up?

Thank you very much and greetings.

 

[DiViDx]

Hi, but need update also MCU? now have MTCE_HLA_V2.74, I have read that some have 2.83, thanks

 

[marchnz]

Hi, but need update also MCU? now have MTCE_HLA_V2.74, I have read that some have 2.83, thanks

Nobody knows for sure....

 

[Fantasymerlin]

Hello

I am using the malaysk rom 7.1.2 for Px3.

On the Radio i have te Update to px3-mal-5.1 but I cannot copy to Stick.

I want to use IT if I have to recover the Radio.

The System say every time cannot read.

The zip-file is at emulated Main. I can See there. If I try to open i dont See something. The filesize is 30mb.

How i can copy to Stick?

Or Does someone have the Update-file to 5.1?

I cannot find them again.

Thank you very much.

 

[Fantasymerlin]

Does Nobody know a answer?

On my Head Unit I find the Update file for 5.1.

I tried to copy to USB Stick but I get a su error. Error number 2.

I think IT is a permission problem. I have root but IT seems that root with RW doesn't allow to copy this file. I tried to change permission to 777 and tried again but file cannot read.

It is a zip file named px3-mal-5.1.zip.

Does anybody know what inside in the Update? Was It important or no?

But how I can copy?

I tried to access with adb. But don't get access. USB debug is enabled. File Transfer Protokoll to mtp.

I tried at Recovery to get access. But the PC don't find the device.

How I can access. My idea is to chmod the file at adb and then pull It to Stick. It is right to chmod to 777? Which uid It neccessary that I can copy with root / su?

Who can help me? It seems Nobody have this Update file anymore.

Thank you very much for help

 

[sitealpha]

@Malaysk
I have a Dasaita PX6 Max10 with android 10. MTCE-HA I have been looking at your firmware and cannot find anything for the mtce ha with android 10. Can you tell me which of your firmware would work with my head unit? the free and the donation or pay also.

 

[bouddha8]

Hell Malaysk, I have the follwowing px3 on my F30 bmw:
mcuver: 012042bJLY-NBT-HW7-190329[B1280-170325]
FrameworkVer: px3-userdebug 7.1.1 NMF26X eng.work2.20190103.154727
Androidver: 7.1.1
AppVer: 2019012201-1280x480_870A
Ram: 2G

Can I update it to android 7.1.2 or higher and how ?
Can I use your Rom for my current version ?
Thanks in advance for your help

 

[torsti]

wrong thread. PLS delete

 

[fashion2891]

Only for PX3 MTCD-MTCE Android 7.1.2 !!!

Only for those who know how to get into the recovery (different combinations of keys)​

How to find out if this firmware is suitable for your device - go to Settings - About the device -we look at the screenshot

View attachment 4311788​

Version 1.0 of October 23, 2017.
Built-in Root latest SuperSU (hidden root access).
Built-in Xposed
Added support for Init.d
Signature verification is disabled.
Added Launcher I modified (see screenshots)
Added programs - Root Explorer, ES File Explorer.
New item in Settings - Custom settings (here all new added items are located)
Added reboot and reboot button in the recovery in StatusBar
Speed of outgoing and incoming Internet in the status bar
The standard sound control is redone
Redesigned graphic design of pop-up messages.
Added module for Xposed - Disable Fullscreen Keyboard - http: //repo.xposed.inf...ablefullscreenkeyboard
You can completely customize the icons in StatusBar. Are in Settings - User settings - Hide - Show icons in the Status Bar and there turn on or off, then what you need.
Screensaver with the function of speed by GPS and Weather.
Module Xposed to display the speed of the GPS in the screensaver - gps-mtc-launcher.
In the archive, along with the firmware, there is a folder called mtc-launcher, it must be copied to the root of the internal memory card (SDCARD) using ES File Explorer. And you must activate the GPS Mtc Launcher module in Xposed !!!!
In the folder Copy_To_internal_sd (SDCARD) - From MPH - to display the speed in MPH (US and others)
In the folder Copy_To_internal_sd (SDCARD) - From KM - to display the speed in KM / H (Russia, Europe and others)
The weather settings in the screensaver and Launcher are adjusted in Settings - User settings - Weather on the screen. There you can turn on - turn off the weather display. Do not forget to enable Settings - Location - By all sources (WiFi and GPS)
Added different time values for running the screensaver in Settings - Screen - Time to start the screensaver Never-15-30-60 seconds-2-3-5-7-10 minutes.
A lot of everything.
Install with full data cleaning - Wipe Data (check the box, look at the screenshot) The first download will be very long, about 15 minutes.

View attachment 4311807​

Download: https://yadi.sk/d/481WJ8kr3P2Gau

Version 2.1 of November 21, 2017.
Made on the basis of the android firmware from October 26, 2017
Video setup instructions -

Download: https://yadi.sk/d/E2_Kt-pz3PtTuZ
The first download after the firmware will be very long 15-20 minutes and the device can reboot several times!!!

New from February 16, 2018, Firmware № 3.0
Video instruction on setting up the system (though the video was shot on 6.0.1 PX5 system) -

1. The firmware was made on the basis of the firmware from February 8, 2018.
2. Fixed Radio schedule (in my Modified Radio) for 800X480 screen resolution. (for testing thanks to Glyckmen) and in the screensaver the Music button.
3. Added screen lock function for PIN code. Enable - Disable in Settings - Custom Settings - Lock screen. The screen lock will occur when the device is fully loaded and when it exits from sleep.
Especially the necessary function, if you leave the car in a car service
4. Updated Xposed to the latest version.
5. Updated Root access (SuperSU) to the latest version.
6. The module for Xposed mtc-launcher is deleted, see below why (duplicate function)
7. Added module for Xposed MVG-V70 (thanks to him for helping me adapt the module for my firmware) xposed-mtce-utils. You can see its settings here - https://forum.xda-developers.com/showpost.php?p=74267480&postcount=2
In the archive, along with the firmware, there are two folders
Copy_To_internal_sd (SDCARD) - From MPH - to display the speed of the GPS in the screensaver in MPH - America, etc.
Copy_To_internal_sd (SDCARD) - From KM - to display the GPS speed in the screensaver in KM/H - Russia, Europe, etc.
It is necessary to copy the entire folder mtce-utils to the root of the internal (sdcard) memory and activate the module in Xposed !!!!
Pay attention to the item:

# packages of white list applications that are not killed when the device goes to sleep.
[mtce.whitelist]

8. Running Viper after sleep, do not forget to turn off the "jumper" in the staff player, with them the Viper does not work. Settings for Music - https://forum.xda-developers.com/showpost.php?p=75596992&postcount=660
9. The sound adjustment panel has been reworked.
10. Added three launchers to the OEM application in the Other Launchers folder
11. Redesigned application bluetooth.
12. Many things can be installed in the OEM application.
13. Much more
I recommend (at your discretion) do Wipe Data.
If you are installing the firmware from Wipe Data, then the first download will be a long 10-15 minutes!
Download Firmware 3.0: https://yadi.sk/d/KBYwFAnZ3SU7Tc

New from February 20, 2018, Firmware № 3.1
Video instruction on setting up the system (though the video was shot on 6.0.1 PX5 system) -

1. Fixed the lock screen (number "0") and a little altered.
2. Added to Settings - Custom Settings - For Developers
3. Added to Settings - User Preferences - Clock settings in the status bar. And the clock and date are made in the middle.
To make the clock visible you need to go to the section Select the color of the clock and date and set its color.
4. Redesigned Screensaver. Also new and old versions are in the OEM application in the folder ModApk - ScreenClock
5. Also in the OEM application is added to Live wallpeper folder with 4 full versions of Live wallpaper. When you install them, then select them on the Desktop
you can in Settings - Screen - Wallpapers - Live Wallpaper.
6. The version of Music in a transparent style is added to the OEM application. Located in ModApk folder - Malaysk Mod - MtcMusic4_Transparent (2 versions - with and without panel)
7. Fixed launching PCRadio.
If you are installing the firmware from Wipe Data, then the first download will be a long 10-15 minutes!
Download Firmware 3.1: https://yadi.sk/d/m-9qQV6t3ScVDL

New from 05 June 2018, Firmware No. 4.0
+ The firmware is made on the basis of the factory firmware from 04/26/2018.
+ The new PCRadio mod from Duk (transparent, with a power button)
+ Updated the module for Xposed from MVG-V70 (4pda) xposed-mtce-utils (thanks to the eum for adapting it for soya firmware)
+ Added a module for Xposed from graser (4pda) dasaita-xposed (thanks to him for the module)
+ Multiple fixes and additions to the firmware
+ Redesigned bluetooth application with the panel and without it (found in the OEM application)
+ Added a new version of the screensaver with the choice of a graphic equalizer (Right bottom button)
Change screen from analog clock to digital - click on the screensaver for 3-4 seconds.
+ Added to Music application button for selecting graphic equalizer - VIS button
+ New version of ViperFX
+ New version of EasyConnected (located in the OEM application in the app folder)
+ another ....
All mod. applications are in the OEM application
If you lose the clock in the status bar, then you need to go to Settings - User Settings - Clock settings in the status bar and there to specify any color of the clock.
Do not forget to copy the folder mtce-utils (is in the archive together with the firmware) after installing the firmware on the internal memory card (sdcard) and activate all modules in Xposed.
I strongly recommend installing the firmware with full data cleaning (Wipe Data), because Many files have been moved and may not work properly after a regular update.
The correct operation of the built-in modules for Xposed is possible only on my mod applications Radio, Music, Bluetooth, Screensaver. All of them are in the OEM application in the ModApk/ 1 Malaysk MOD folder and in the ScreenClock Malaysk folder.
Download Firmware 4.0: https://yadi.sk/d/o5xGdE6p3X9vqT

New from 11 June 2018, Firmware No. 4.1
Who installed the firmware No.4.0, then you can install it with a simple update, without deleting the data (but if you updated it to the manual module xposed-mtce-utils, before you install the update, go to Settings - Programs - xposed-mtce-utils, click on three vertical dots in right upper corner and delete the Update module), for all others I recommend installing with full data cleaning (Wipe Data).
+ Two screensavers MTCScreenClock_No_Transparent and MTCScreenClock_Transparent (found in the OEM application) are redone - a graphic equalizer is added (choice is the upper right button) and a temperature display is added from the canbas (I need to check, I do not have such in the device)
+ Corrected sound controller
+ New converted widgets.
+ Other
Download Firmware 4.1: https://yadi.sk/d/RPvx0Dv43Xm2e3

New from 11 December 2018, Firmware No. 5.0
I strongly recommend installing the firmware in a clean, with the removal of all data (Wipe Data)!
The first download after the firmware will be very long 10-15 minutes, then the device will reboot - this is normal!
Android base - factory firmware from November 11, 2018.
Added support for online updates.
Practically different from previous firmware by 80 percent.
Do not forget to copy the mtce-utils folder to the root of the internal memory and activate all the modules Xposed!
Firmware setting video -

Download Firmware 5.0: https://yadi.sk/d/XYpCdgjydCp8Cw
Mirror Firmware 5.0: https://mega.nz/#!wgRXjQzJ!8gLrfjHb_5mNGrW5I8yOXoJcWTvuIP8nlNU3S27Vn9w
Big request to support the project! I need to pay for a server for online updates! Who is not indifferent and likes my firmware and so that the project can be developed HERE
Released online firmware update 5.2.
1. Fixed the operation of the Navigation and MODE buttons.
2. YahooWeather provider removed (Since January 3, 2019, access to this weather provider has been terminated) Only OpenWeather has been left.
3. You can customize the Launcher New Style in Settings - Custom Settings - Launcher Settings.
4. Added Greek, Romanian, Turkish languages to User settings.
5. Added Russian language in the factory settings.
6. Now fully customizable screensaver. You can set any image on the background, make a gradient.
Remove add elements in the screensaver. Make any color and transparency of the text in the screensaver. Settings are in Settings - Custom Settings - Screensaver Settings.
So far it works only in one screensaver, which is located in the OEM application, in the ScreenClock Malay folder - MTCScreenClock_2_Digital_Clock_STYLE_KMH and MTCScreenClock_2_Digital_Clock_STYLE_MPH.
In the next firmware upgrade, this will work on all screensavers.
7. Other updates and additions.
If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then click on the "Donate to Me"

non

Only for PX3 MTCD-MTCE Android 7.1.2 !!!

Only for those who know how to get into the recovery (different combinations of keys)​

How to find out if this firmware is suitable for your device - go to Settings - About the device -we look at the screenshot

View attachment 4311788​

Version 1.0 of October 23, 2017.
Built-in Root latest SuperSU (hidden root access).
Built-in Xposed
Added support for Init.d
Signature verification is disabled.
Added Launcher I modified (see screenshots)
Added programs - Root Explorer, ES File Explorer.
New item in Settings - Custom settings (here all new added items are located)
Added reboot and reboot button in the recovery in StatusBar
Speed of outgoing and incoming Internet in the status bar
The standard sound control is redone
Redesigned graphic design of pop-up messages.
Added module for Xposed - Disable Fullscreen Keyboard - http: //repo.xposed.inf...ablefullscreenkeyboard
You can completely customize the icons in StatusBar. Are in Settings - User settings - Hide - Show icons in the Status Bar and there turn on or off, then what you need.
Screensaver with the function of speed by GPS and Weather.
Module Xposed to display the speed of the GPS in the screensaver - gps-mtc-launcher.
In the archive, along with the firmware, there is a folder called mtc-launcher, it must be copied to the root of the internal memory card (SDCARD) using ES File Explorer. And you must activate the GPS Mtc Launcher module in Xposed !!!!
In the folder Copy_To_internal_sd (SDCARD) - From MPH - to display the speed in MPH (US and others)
In the folder Copy_To_internal_sd (SDCARD) - From KM - to display the speed in KM / H (Russia, Europe and others)
The weather settings in the screensaver and Launcher are adjusted in Settings - User settings - Weather on the screen. There you can turn on - turn off the weather display. Do not forget to enable Settings - Location - By all sources (WiFi and GPS)
Added different time values for running the screensaver in Settings - Screen - Time to start the screensaver Never-15-30-60 seconds-2-3-5-7-10 minutes.
A lot of everything.
Install with full data cleaning - Wipe Data (check the box, look at the screenshot) The first download will be very long, about 15 minutes.

View attachment 4311807​

Download: https://yadi.sk/d/481WJ8kr3P2Gau

Version 2.1 of November 21, 2017.
Made on the basis of the android firmware from October 26, 2017
Video setup instructions -

Download: https://yadi.sk/d/E2_Kt-pz3PtTuZ
The first download after the firmware will be very long 15-20 minutes and the device can reboot several times!!!

New from February 16, 2018, Firmware № 3.0
Video instruction on setting up the system (though the video was shot on 6.0.1 PX5 system) - https://www.youtube.com/watch?v=YD31zLeNrXc
1. The firmware was made on the basis of the firmware from February 8, 2018.
2. Fixed Radio schedule (in my Modified Radio) for 800X480 screen resolution. (for testing thanks to Glyckmen) and in the screensaver the Music button.
3. Added screen lock function for PIN code. Enable - Disable in Settings - Custom Settings - Lock screen. The screen lock will occur when the device is fully loaded and when it exits from sleep.
Especially the necessary function, if you leave the car in a car service
4. Updated Xposed to the latest version.
5. Updated Root access (SuperSU) to the latest version.
6. The module for Xposed mtc-launcher is deleted, see below why (duplicate function)
7. Added module for Xposed MVG-V70 (thanks to him for helping me adapt the module for my firmware) xposed-mtce-utils. You can see its settings here - https://forum.xda-developers.com/showpost.php?p=74267480&postcount=2
In the archive, along with the firmware, there are two folders
Copy_To_internal_sd (SDCARD) - From MPH - to display the speed of the GPS in the screensaver in MPH - America, etc.
Copy_To_internal_sd (SDCARD) - From KM - to display the GPS speed in the screensaver in KM/H - Russia, Europe, etc.
It is necessary to copy the entire folder mtce-utils to the root of the internal (sdcard) memory and activate the module in Xposed !!!!
Pay attention to the item:

# packages of white list applications that are not killed when the device goes to sleep.
[mtce.whitelist]

8. Running Viper after sleep, do not forget to turn off the "jumper" in the staff player, with them the Viper does not work. Settings for Music - https://forum.xda-developers.com/showpost.php?p=75596992&postcount=660
9. The sound adjustment panel has been reworked.
10. Added three launchers to the OEM application in the Other Launchers folder
11. Redesigned application bluetooth.
12. Many things can be installed in the OEM application.
13. Much more
I recommend (at your discretion) do Wipe Data.
If you are installing the firmware from Wipe Data, then the first download will be a long 10-15 minutes!
Download Firmware 3.0: https://yadi.sk/d/KBYwFAnZ3SU7Tc

New from February 20, 2018, Firmware № 3.1
Video instruction on setting up the system (though the video was shot on 6.0.1 PX5 system) - https://www.youtube.com/watch?v=YD31zLeNrXc
1. Fixed the lock screen (number "0") and a little altered.
2. Added to Settings - Custom Settings - For Developers
3. Added to Settings - User Preferences - Clock settings in the status bar. And the clock and date are made in the middle.
To make the clock visible you need to go to the section Select the color of the clock and date and set its color.
4. Redesigned Screensaver. Also new and old versions are in the OEM application in the folder ModApk - ScreenClock
5. Also in the OEM application is added to Live wallpeper folder with 4 full versions of Live wallpaper. When you install them, then select them on the Desktop
you can in Settings - Screen - Wallpapers - Live Wallpaper.
6. The version of Music in a transparent style is added to the OEM application. Located in ModApk folder - Malaysk Mod - MtcMusic4_Transparent (2 versions - with and without panel)
7. Fixed launching PCRadio.
If you are installing the firmware from Wipe Data, then the first download will be a long 10-15 minutes!
Download Firmware 3.1: https://yadi.sk/d/m-9qQV6t3ScVDL

New from 05 June 2018, Firmware No. 4.0
+ The firmware is made on the basis of the factory firmware from 04/26/2018.
+ The new PCRadio mod from Duk (transparent, with a power button)
+ Updated the module for Xposed from MVG-V70 (4pda) xposed-mtce-utils (thanks to the eum for adapting it for soya firmware)
+ Added a module for Xposed from graser (4pda) dasaita-xposed (thanks to him for the module)
+ Multiple fixes and additions to the firmware
+ Redesigned bluetooth application with the panel and without it (found in the OEM application)
+ Added a new version of the screensaver with the choice of a graphic equalizer (Right bottom button)
Change screen from analog clock to digital - click on the screensaver for 3-4 seconds.
+ Added to Music application button for selecting graphic equalizer - VIS button
+ New version of ViperFX
+ New version of EasyConnected (located in the OEM application in the app folder)
+ another ....
All mod. applications are in the OEM application
If you lose the clock in the status bar, then you need to go to Settings - User Settings - Clock settings in the status bar and there to specify any color of the clock.
Do not forget to copy the folder mtce-utils (is in the archive together with the firmware) after installing the firmware on the internal memory card (sdcard) and activate all modules in Xposed.
I strongly recommend installing the firmware with full data cleaning (Wipe Data), because Many files have been moved and may not work properly after a regular update.
The correct operation of the built-in modules for Xposed is possible only on my mod applications Radio, Music, Bluetooth, Screensaver. All of them are in the OEM application in the ModApk/ 1 Malaysk MOD folder and in the ScreenClock Malaysk folder.
Download Firmware 4.0: https://yadi.sk/d/o5xGdE6p3X9vqT

New from 11 June 2018, Firmware No. 4.1
Who installed the firmware No.4.0, then you can install it with a simple update, without deleting the data (but if you updated it to the manual module xposed-mtce-utils, before you install the update, go to Settings - Programs - xposed-mtce-utils, click on three vertical dots in right upper corner and delete the Update module), for all others I recommend installing with full data cleaning (Wipe Data).
+ Two screensavers MTCScreenClock_No_Transparent and MTCScreenClock_Transparent (found in the OEM application) are redone - a graphic equalizer is added (choice is the upper right button) and a temperature display is added from the canbas (I need to check, I do not have such in the device)
+ Corrected sound controller
+ New converted widgets.
+ Other
Download Firmware 4.1: https://yadi.sk/d/RPvx0Dv43Xm2e3

New from 11 December 2018, Firmware No. 5.0
I strongly recommend installing the firmware in a clean, with the removal of all data (Wipe Data)!
The first download after the firmware will be very long 10-15 minutes, then the device will reboot - this is normal!
Android base - factory firmware from November 11, 2018.
Added support for online updates.
Practically different from previous firmware by 80 percent.
Do not forget to copy the mtce-utils folder to the root of the internal memory and activate all the modules Xposed!
Firmware setting video - https://www.youtube.com/watch?v=3XJ6x5PbtlM
Download Firmware 5.0: https://yadi.sk/d/XYpCdgjydCp8Cw
Mirror Firmware 5.0: https://mega.nz/#!wgRXjQzJ!8gLrfjHb_5mNGrW5I8yOXoJcWTvuIP8nlNU3S27Vn9w
Big request to support the project! I need to pay for a server for online updates! Who is not indifferent and likes my firmware and so that the project can be developed HERE
Released online firmware update 5.2.
1. Fixed the operation of the Navigation and MODE buttons.
2. YahooWeather provider removed (Since January 3, 2019, access to this weather provider has been terminated) Only OpenWeather has been left.
3. You can customize the Launcher New Style in Settings - Custom Settings - Launcher Settings.
4. Added Greek, Romanian, Turkish languages to User settings.
5. Added Russian language in the factory settings.
6. Now fully customizable screensaver. You can set any image on the background, make a gradient.
Remove add elements in the screensaver. Make any color and transparency of the text in the screensaver. Settings are in Settings - Custom Settings - Screensaver Settings.
So far it works only in one screensaver, which is located in the OEM application, in the ScreenClock Malay folder - MTCScreenClock_2_Digital_Clock_STYLE_KMH and MTCScreenClock_2_Digital_Clock_STYLE_MPH.
In the next firmware upgrade, this will work on all screensavers.
7. Other updates and additions.
If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then click on the "Donate to Me"

non riesco a scaricare,mi dice file cancellato

 

[iguana21i]

hi guys.i have problem in this unit to radio.i don't have sound at fm radio.how can i fix it?

 

[santimandu]

Hello and i really appreciate if someone can tell me if this rom works for this px3 MTCD_KSP Unit of the attached pictures.
Thanks in advance

 

[santimandu]

Hello and i really appreciate if someone can tell me if this rom works for this px3 MTCD_KSP Unit of the attached pictures.
Thanks in advance

Someone knows and may answer if its secure to install this rom?

 

[santimandu]

Someone knows and may answer if its secure to install this rom?

@Malaysk did u know if it works with that?

 

[juszuf]

WELCOME!

I'm sorry about the bad English speech, I'm writing with a translator...

I wonder if I have anything for my Firmware device?

Currently android 11 is running, but unfortunately the radio is not working properly and reacts very slowly. (Hanging) radio broadcasts find absolutely nothing. just buzz.... please someone who can help 1 rom which is fast and works normally...
I'm looking on the forums, but unfortunately I can't find anything.

Thank you for your help.

 

[pizarro77]

Guys good morning, sorry I'm new, I have a px3 and you want to install your rom, but I can not in any way to enter the recovery for the various wipes, how do you do it? Thank you very much for the availability.

 

[Capetanakos]

Does it support apple carplay?

 

[marnow249]

Cholera Malaysk, mam następujący px3 na moim bmw F30:
Cuver: 012042bJLY-NBT-HW7-190329[B1280-170325]
FrameworkVer: px3-userdebug 7.1.1 NMF26X eng.work2.20190103.154727
Android: 7.1.1
Wersja aplikacji: 2019012201-1280x480_870A
Pamięć RAM: 2G

Czy mogę zaktualizować go do Androida 7.1.2 lub nowszego i jak?
Czy mogę użyć twojego Rom'a w mojej aktualnej wersji?
Z góry dziękuje za twoją pomoc

Mod edit - translated by https://www.deepl.com/
You can install Malay. Upgrade version 7.1.2. It worked for me. If you want other languages then add Hal9k mod
************************
Możesz zainstalować malajskiego. Podwyższa wersja wersji 7.1.2. U mnie działało. Jeśli chcesz inne języki to dograj moda Hal9k

 

[neelix7]

Hey there, I have also updated to version 5.0 and I am currently missing a button with which I can shut off the screen of my device. Any ideas?

 

[Sille12345]

л Я скачал ром по ссылке, но он загружается, выдает ошибку, как я могу его скачать, спасибо за ваши усилия, я был бы признателен, если бы вы могли помочь.

 

[Sille12345]

MHello emeğiniz için teşekkürler rom harika çalışıyor ama tuş ayarları direksiyon butonu menüleri no canbus nasıl kurulur teşekkürler