[ROM][PX5][Oreo][8.0.0] Hal9k ROM 3 for MTCD/E head units with Android 8/6

[MrButcher]

Hmm, then the sdcard is the problem? Prepare and try another card?

already tried. no difference

 

[MrButcher]

already tried. no difference

Finally it was somehow the SD-card. I have used the installer on another notebook and everything went fine.
Took mit 4h yesterday!

 

[f465gt]

Ok, since now the first OTA Update is available, I went and bought the ModInstaller Pro together with the OTA Update key for Android 9 v4 Mod. It work very well and the backup/recovery via the upfadate.zip saved me a lot of time. Thumbs up!

 

[mielcu3]

Hello. I have Witson radio PX5 for Peugeot 407, with canbus. Is the canbus working, after upgrade to your rom?

 

[MediaTerraneo]

Hi,
I have Hal9k ROM 3 for MTCD/E, Android 8 on XRC PX5 HU.
I was going to buy the app ModIntallerPro in order to upgrade to ROM 4; before that I tried to do a back-up using "update.zip" (the one in "backup8").

I placed it on a USB pen drive and I was surprised to see the 2 USB port cable were not longer working: for sure the USB drive mounting was not working from a while. I tried more USB pens. On the contrary a mouse works, connecting its dongle to the USB; the electrical connection is on.

I tried to use an SD card for the back-up, but it fails.

I kindly require:
- some help to make mounting the USB pen drive again; and /or
- info on the possibility to use back-up / restore with the SD (is it possible?)

Thanks.

 

[MediaTerraneo]

Hi,
I have Hal9k ROM 3 for MTCD/E, Android 8 on XRC PX5 HU.
I was going to buy the app ModIntallerPro in order to upgrade to ROM 4; before that I tried to do a back-up using "update.zip" (the one in "backup8").

I placed it on a USB pen drive and I was surprised to see the 2 USB port cable were not longer working: for sure the USB drive mounting was not working from a while. I tried more USB pens. On the contrary a mouse works, connecting its dongle to the USB; the electrical connection is on.

I tried to use an SD card for the back-up, but it fails.

I kindly require:
- some help to make mounting the USB pen drive again; and /or
- info on the possibility to use back-up / restore with the SD (is it possible?)

Thanks.

I tried some MCU downgrades, I made a system restore cleaning anyting, but both the USB ports are no longer able to mount a pendrive. Just the electrical connection works. I also tried to clean the sockets on the user side and to apply changes in the "Factory settings" but no results.
Could the HU have lost the USB drivers? Could it be a HW issue (but it's on both the USB) ?
Any idea please?

 

[the-unknown]

Hi,

Can someone explain how the tasker integration between the steering wheel keys and the intent works?



Edit:

I finally worked it out. For anyone else who is out of their depth and struggling:

1. In the app "Wheel key Study" bind a steering wheel key to one of the tasker specific options. 0-9, * or #.

2. In tasker create a profile with Event - System - Intent received.

3. For "Action" enter "com.microntek.report.event" and leave the rest blank

4. Link this profile to a task with variables - variable set.

5. Under "name" enter "%Key" (must have a capital)
Under "value" enter "%value"

The variable %Key will now have the value of the keycode of whatever button you press at anytime. This can be seen in the variables tab in tasker.

Now you can use this to do anything you want.

For example if you want to launch Spotify you could bind a key to "0" in Wheelkey Study.

Then create a profile that runs on variable set with the variable as "%Key" and the value as 292 (the keycode of 0).

Then link this to a task that launches Spotify.

The capital letter in %Key is important because it lets any profile or task reference the variable. You can name it anything you want, but it has to have a capital.

Seems not to work for me.
Set the * to a key on my swc an on the HU. But it doesn't work. See pictures attached. Is there something wrong?

Thanks

 

[junk68]

Problems with Android buttons

Hallo to everyone,
I have a Dasaita PX5 with Android 8. A few months ago I successfully updated to Hal9K and everything worked fine until last october. I noticed that some buttons didn't work anymore. First home button didn't work (both, on screen and physical) afterwards menu button stoped working. Now task manager doesn't come up. I noticed also that GPS doesn't get a fix (more frequently than usual) and also speed indication in screensaver goes random when I stop the car. I tried to download suggested updates but nothing has changes, the only thing is that a screen pops up saying that I run an outdated version. All runs fine, radio, Bluetooth and car features (from time to time reverse picture freezes and I have to reboot radio) What can I do to have it run again properly?

 

[t24ever]

Hi,

 

[SteveBruchpilot]

please help

I have big issues installing the custom rom
My Device: Erisin MTCE PX5
I made the sd boot card and everything works fine with installation,
it is also booting fine to recovery.
But: when i try to install the update, everytime it stops, starts flashing short time this screen attached.
"No command
Screen says: E:failed to mount / metadata: Invalid argument"
I tryed it now several times. always the ame- with different updates. what can be wrong.
im kinda desperate.. :crying:
hope you guys can help me
let me know if you need more informations

 

[90Ninety9]

Working for months now bootloop

Hi ,

I had this running fine on my PX5 ( 8.0 Hal9K) upgraded from stock 6.0 android

Suddenly my unit has been stuck on a boot loop . A GPS Splash shows , unit resets then repeats . How do I re-flash ?

When inserting the original SD (Hal900) upgrade card is recognised and shows the SD splash screen but the application will not recognize or detect the update.img on the usb



Thanks

 

[Silver_]

Poweramp and FIS/MFA information VW(or system informatión of driver)??

The original player that comes with the @Hal9k_ ROM is capable of sending information to the small screen of my on-board computer in mi car, but the poweramp app does not send anything, Is there some other Player that does this, apart of course, of the original ?? THX

 

[drykc]

Hello,
I have an Erisin 8805V head unit :
PX5,
no-root origin rom Android 8,
MCU : MTCE-KGL-V2.93-1.

I read a lot of things on this post and others but I could not find the information sought.
Can you tell me if it is possible to have the WIDEVINE DRM module on this head unit ?

Is it something included in the ROM (maybe in this Hal9k ROM) ? Or in the MCU? Or other ?

I would like to know if it is possible to add it in any way because it is necessary for many TV applications (molotov, mycanal ...)

I hope I have provided you with the information necessary to respond to me.
Thanks in advance for your feedback.

 

[Liviu89]

Hi. I have an HU with Android 8, PX5... I've tried to install this rom and in recovery mode I receive something with "Installation Aborted" or something like this... I don't work because I have stock Android 8 and I need to install Android 6 and then 8??? Or what is the problem?

 

[sean19661]

Hello everyone
Couple of questions
Dose Hal9k V4 pie 9.0 full version
Have xpose and PCRADIO and Adaway incorporated into his rom
This is the deciding factor for me to with his rom
Any help please and thank you.

Sent from my SM-G965U using Tapatalk

 

[marchnz]

Hello everyone
Couple of questions
Dose Hal9k V4 pie 9.0 full version
Have xpose and PCRADIO and Adaway incorporated into his rom
This is the deciding factor for me to with his rom
Any help please and thank you.

Sent from my boing using errp

What does first post list.

 

[alfondehesa]

Hi everyone!

Loving the Hal9k Android 9! I have one problem though. I have the Viper4Android that came with the ROM, but even after I install the drivers it's not doing anything, only the equalizer that came stock does something. Am I missing something?

 

[f465gt]

I guess you need to go to the Magisk Manager and install the Viper driver module.
Also the effects seem not to have an impact on the stock FM radio app. With the tweaked version from kotix (NavRadio+) it works.

 

[90Ninety9]

I have been without a car stereo this year, my unit is still boot looping

I tried to reflash

I created a new upgrade card (provided within the archive for the Android 6 to 8 here

I inserted the SD within the GPS slot , then reset the HU by holding the power button, until flashing, around 10 seconds .

The 'upgrade card' screen is shown (attached). I have been waiting 10 minutes but no messages or changes .

Can you help with this? Please

 

[Ati_gangster]

I have been without a car stereo this year, my unit is still boot looping

I tried to reflash

I created a new upgrade card (provided within the archive for the Android 6 to 8 here

I inserted the SD within the GPS slot , then reset the HU by holding the power button, until flashing, around 10 seconds .

The 'upgrade card' screen is shown (attached). I have been waiting 10 minutes but no messages or changes .

Can you help with this? Please

Try another MicroSD.