[ROM][PX5][Q][10.0] Malaysk ROM for PX5 RK3368 with Android 10

Search This thread

cici

Member
Oct 30, 2006
8
1
I made some more tests, the phone calls inside the car via Bluetooth are completely muted (both loudspeaker and microphone). The phone rings inside the car, but when I answer the call, the voice and mic are completely muted. Still, I can commute voice between phone and car using the car’s application and use the phone, but it's dangerous to hold the phone when I drive. Before installing Malay patch everything worked perfect. Also, the music from my phone via Bluetooth sounds inside the car, but when I launch A2DP application the music becomes muted till I close the A2DP app again; the A2DP commands works normally, but no sound at all inside the car. Is it related to Viper settings? Also, A2DP worked nice before, with the stock Android 10. Can I solve these 2 problems or shall I revert back to stock Android 10 firmware? Thank you!
 

siski123

Member
Feb 13, 2021
12
4
me you see, my problem on the bluetooth is that the phone works well but not the music I have to open the app to start a song and after closing the app to then start the music on my cell phone
 

jackk111111

Member
Feb 5, 2018
16
0
Patched Malay OTA (full version), everything worked flawless. I have a question: the message from attachment appears when I run magisk. What can I do to make this message to not appear anymore? How can I transform the application from system app in user app? I tried to convert it in user app using Titanium Pro, after 3 reboots I arrived in the same point, with the same message.
Idem 😭
 
I made some more tests, the phone calls inside the car via Bluetooth are completely muted (both loudspeaker and microphone). The phone rings inside the car, but when I answer the call, the voice and mic are completely muted. Still, I can commute voice between phone and car using the car’s application and use the phone, but it's dangerous to hold the phone when I drive. Before installing Malay patch everything worked perfect. Also, the music from my phone via Bluetooth sounds inside the car, but when I launch A2DP application the music becomes muted till I close the A2DP app again; the A2DP commands works normally, but no sound at all inside the car. Is it related to Viper settings? Also, A2DP worked nice before, with the stock Android 10. Can I solve these 2 problems or shall I revert back to stock Android 10 firmware? Thank you!

Probably not the issue. But is the radio is the only Bluetooth your phone is connected to?
I just had a similar issue, turned out the phone was connecting to both my Px5 unit and to the BT built into the car. VW has their BT module separate from the head unit. My phone was connecting to both the car and the Px5 unit and I guess prioritizing the cars connection.
After I made the phone forget the cars connection my Bluetooth started working right.
 

cici

Member
Oct 30, 2006
8
1
Solved, with the help of Malay, thanks a lot. He suggested to put back WQ_BC6 module, as it was in my CAR-KIT with Android 9 (original). Instead of WQ_BC6 I put WQ_BC8 after I changed with stock Android 10, because the old WQ-BC6 didn't want to work right anymore. But WQ-BC8 worked perfect. Then I patched with Malay pro and the Bluetooth didn't want to work fine (no sound from phone callings). Malay asked me to try again with the original WQ-BC6, and voila, it worked good again. Small problems with OBD II can bus adapter, but I figured how to make it work: each time I wish to launch FAP code, I must unpair OBD II in Bluetooth. Then launch FAP, let auto-pairing of OBD II by the FAP code (not using Bluetooth pairing) then it works till I switch off the CAR-KIT. Then, for a new FAP session, again un-pairing OBD II in Bluetooth, launch FAP, and so on...
 

cici

Member
Oct 30, 2006
8
1
Hello how do I get the full version of this beautiful Rome
To install the full version, you must first install the LITE version. After you downloaded it, un-rar the LITE file and you will find all the necessary explanations in a file named "Lite_Instruction ENG.docx". The upgrade from LITE to FULL can be done only OTA, after you pay for it and send the necessary information to Malay via e-mail.
 

siski123

Member
Feb 13, 2021
12
4
with roms 1.1.7, my radio quickly goes up in heat when it falls on the screensaver. enough that when I but the heating of my car in addition my gpu goes up to 106 ° celcius, on the home page, the degree of heat remains between 50 and 80 ° c all depend on what rolls in the background. I solved my problem physically by adding a cpu pc fan my degree has changed enormously go to max 50 ° c in standby mode and between 20 ° to 45 ° on the home page, but I wonder why the screen saver mode turn up my heat as much as her. for the moment my trouble is solved for me but I let know if it can be adjusted in a patch eventually
 

Attachments

  • IMG_20210301_140629.jpg
    IMG_20210301_140629.jpg
    2 MB · Views: 87
  • Screenshot_20210302_163852.jpg
    Screenshot_20210302_163852.jpg
    272.6 KB · Views: 86

denispetrov90

Member
Mar 7, 2011
11
1
with roms 1.1.7, my radio quickly goes up in heat when it falls on the screensaver. enough that when I but the heating of my car in addition my gpu goes up to 106 ° celcius, on the home page, the degree of heat remains between 50 and 80 ° c all depend on what rolls in the background. I solved my problem physically by adding a cpu pc fan my degree has changed enormously go to max 50 ° c in standby mode and between 20 ° to 45 ° on the home page, but I wonder why the screen saver mode turn up my heat as much as her. for the moment my trouble is solved for me but I let know if it can be adjusted in a patch eventually

Very nice job. How did you connect the additional fan? And which onr is the additional fan. Tq.
 

Szzz

New member
Feb 2, 2008
4
0
Bielawa, Poland
Hi Malay, great ROM, so far I'm really happy with the full version, great job!
But... is there any possibility to assign "Shuffle" funtion to a steering wheel button? I can see Play, Next, etc but I reallyy wanted Shuffle to be assigned.
Also I am unable to download 1.1.7 version, I'm trying everyday since release with no luch, it says that I have the most recent version.
 

cici

Member
Oct 30, 2006
8
1
Hi, does anyone know what version of Netflix (and where to download) works with the Malay's FULL version? Before, the Netflix downloaded from Aptoide worked fine, but now it is not launching anymore!
 
Last edited:

siski123

Member
Feb 13, 2021
12
4
Very nice job. How did you connect the additional fan? And which onr is the additional fan. Tq.
I buy a temperature controller that leaves the fan at 50 ° celcius.


I plug in all the fans on the circuit so when it ram no need to hear the fans in the background
 
  • Like
Reactions: denispetrov90

Timeshell

Senior Member
Feb 9, 2007
163
3
Port Hope
Any idea why Torque won't install? I'm currently using version 1.1.5? I haven't been able to install Torque on any Malay Android 10, from lite to this one.

I resolved this. I'm not sure why, but it appears that Torque partially installed the first time. It didn't appear as installed and wasn't visible to uninstall it. Trying to reinstall it over the partial install wasn't successful. I ended up doing a factory reset and everything is installing fine now.
 

denispetrov90

Member
Mar 7, 2011
11
1
I buy a temperature controller that leaves the fan at 50 ° celcius.


I plug in all the fans on the circuit so when it ram no need to hear the fans in the background

Thanks. Where did you put the temperature sensor? You set it to turn on the fan when the degrees goes 50 and above, right? Is this controlling only the additional fan?

Thanks.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Since installing this ROM (Pro Version), I've had more issues with my device than ever before. Even under very light load, the entire device locks up and gets unusable. Trying to install OTA updates doesn't work at all, as the download gets to ~60% and then gets stuck. I tried to install the light version again and then update back to pro, which doesn't work either and locks up the device when installing the update. As long as there is no way to install the pro version as a zip file manually, unfortunately this ROM is unusable for me.
    1
    Before the last ota update on my PX5 (i am using full version) the unit was much more stable and was working better. The navigation sometimes dont want to start now, I need to make a reboot the unit before run the navigation. Radio not working after reboot, youtube music also. This is what I use ot this device and all this is not working properly.
    1
    Hi There

    Already upgraded to pro version.
    USB port for wifi dongle goes from on to off. Previously working perfect with Oreo
    Any solution?

    Is there any way to unistall the EasyConnected app or disable it?
    Popups frequently and I dont really need it that app.
    You would probably need to input some commands in a terminal emulator but I don't know what they would be for usb. I only know for my regular wifi.
    I'm sure someone has listed them.
    Easyconnect is tied to the firmware. I saw where someone removed it and he messed up his system and had to do a reinstall.
    You need to post pics of your system information so other can see what you have and can maybe help.
    1
    Hi There,
    Does anyone know how to turn off/block EasyConnection app? I don't want to pair my phone with the radio, and this app is annoying. Disable in settings does not works.
    1
    The easy way is Hal9k's ModInstaller Pro

    Buona Fortuna
  • 10
    Only for devices processor Rockchip PX5, MCU - MTCD, MTCE Android 10.0 !

    Mod Q 10.0 Android PX5 RK3368
    For PX6 RK3399 mod 10 android is HERE
    Only for those who have 10 android installed, a PX5 processor and have an installed MCU that starts with MTC (X) - where X can have different letters.
    With firmware device, you need to understand all the risks. Neither I nor the website is not responsible for your actions and possibly killed devices! Everything you do - you do at your own peril and risk.

    Before installing the firmware, be sure to try to get into the Recovery (I have this method - I press the RESET button (RST) and hold the buttons on the front panel of the device until the buttons blink - I release the RESET button and immediately press the RESET button again for a short time 1-2 times ).
    IMPORTANT!!
    : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product (this is due to the fact that in 10 android these sections are dynamic and protected by the android itself from changes)- otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).

    How do you know if your device is suitable for this forum thread? You can see the device in Settings - System - About device: look at the photo

    What's added, fixed in LITE firmware version:

    Root access (Magisk) 8.0.2
    IMPORTANT!! : You cannot change the firmware versions in the system partitions in LITE - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
    Added ESFileExplorer, RootExplorer programs.
    Two modified launchers with the ability to customize them (located in Mod Settings).
    Enabled the ability to start the screensaver and set the start time to 15-30 seconds 1-3-5-7-10 minutes.
    By default, video viewing while driving is enabled and audio mute in Navigation is set to -3.
    Changed basic Settings.
    Possibility to set viewing of Internet traffic speed in the Status Bar.
    Ability to change color and gradient in the Status Bar.
    Many other changes and additions.

    Installing LITE firmware version:

    Unzip the archive and write the Update.zip file to a SD card or USB flash drive (must be formatted in FAT32). Insert into the loaded device. After a few seconds, the update menu will appear. We put a checkmark on Wipe Data (you will lose all your installed programs) and click on the Install button. See the screenshot below. The machine will reboot and the firmware installation will begin.
    1111.png

    Download LITE version:

    Be sure to read the instructions inside the archive, along with the firmware !!!
    I want to warn you: Everything that you do, you do at your own peril and risk.
    Can't update Magisk module !! Only Magisk Manager can be updated!

    Download: https://yadi.sk/d/6HDYtp3zDMdTng
    Mirror: https://mega.nz/file/U9ZR2aqK#1WHxuGaKud8w6kzosgJcRy_KLZmWbYq8W42JlBghemU

    ----------------------------------------------
    What's added, fixed in FULL firmware version:

    Full root access (Magisk)
    IMPORTANT!! : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
    Seven completely modified launchers with the ability to view tags for listening to music (any music app), Bluetooth music and radio stations.
    The ability to customize Launchers (enable, disable unnecessary functions in the settings) and weather settings in them and display the speed via GPS.
    4 types of screen savers with analog and digital clocks, with the ability to display GPS speed, weather, music listening tags (any music application),
    Bluetooth music and radio stations from the Radio app. Full customization of screensavers - color, font, disabling unnecessary functions, your car logo, etc. In the settings.
    Change splash screen - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM app.
    Changed the volume bar and reduced its disappearance time. It is also fully configurable in Settings Mod - Mod settings - Sound settings.
    Fully customizable panel status with the ability to enable and disable buttons and icons in it in the settings and it is possible to completely disable it.
    Reload key added to the status bar.
    Added buttons "Screensaver", "Music", "Navigation", "Bluetooth Music" in the status bar (can be enabled or disabled in the settings).
    Changed the function of calling the brightness panel in the status bar.
    The screensaver is now launched in all programs, in the Mod Settings there is an Application Whitelist, where you can specify applications where the screensaver will not start.
    Added a list of applications in the Mod settings, where you can specify autostart after sleep.
    Added equalizer ViperFX - you can watch the settings in the video
    Changed Bluetooth Music app.
    Applications Music, Radio, Video have been completely changed. You can install standard applications from the OEM application.
    Video files can be played in the background.
    Now when you switch on rear view camera the brightness is in creased up to maximum automatically
    4 different types of radio apps have been added in the OEM app (including radio with Day and Night support)
    Go to the OEM app and install the app from there.
    3 different types of Music app have been added in the OEM app.
    Split screen support (not all apps support)
    Added online radio PCRadio
    Mod settings - MOD Settings - System settings - added automatic screen brightness by GPS.
    Supports 1280X720 and 1024X600 screen resolutions.
    Added four customizable buttons to screensavers to launch your programs.
    - Long press on the button - select the application.
    - Short press on the button - start the application.
    You can now configure the MODE button to launch your applications.
    - Located in Mod Settings - MOD Settings - System Settings - Select applications to launch by pressing the MODE button.
    - If it is disabled, the standard method of operation of the MODE button is used (launching Radio-Music-Video)
    Added the ability to automatically adjust the sound based on GPS speed.
    Located in Settings mod - MOD Settings - Sound settings - Auto volume control by GPS.
    Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
    Located in Mod Settings - MOD Settings - System Settings - Popup Settings.
    Fixed GPS work.
    - Improved location accuracy.
    - With a cold start - satellites are located in 40-70 seconds.
    - With a hot start (after sleep or reboot) - instantly.
    Anyone who had problems with USB ports or missing WiFi - fixed.
    USB and WiFi are initialized after the system is fully booted and after sleep.
    New method and settings of the whitelist of programs to run after sleep (located in Mod Settings - Mod Settings - System Settings)
    New whitelist for programs in which the screensaver will not start (located in Mod Settings - Mod Settings - Screensaver Settings)
    Redesigned Launcher with day and night support. Also added to Mod Settings - Mod Settings - Launchers to configure it. You can customize the display of the main screen
    - Clock, GPS speed, Weather or choose to display your logo (download a logo on the Internet (for example, a BMW car logo),
    in PNG format and preferably with a transparent background and copy the file to the device's internal memory)
    If after updating the firmware, every time the system boots, the location permissions for the launcher are asked, go to Mod Settings - Mod Settings -
    Launcher Settings - Launcher with day and night support and enable GPS speed display.
    New graphic equalizer in Music and Screensaver apps, with four different graphic equalizers and color selection.
    You can now set the time for showing music and radio notifications in Mod Settings from 1 to 10 seconds.
    You can change the DPI of the screen. The range is from 260dpi to 160dpi (standard 220 by default) - I set it to 200dpi. Located - Mod Settings - Mod Settings - System Settings.
    You can assign the launch of your applications to the buttons on the steering wheel or on the front panel of the device. Located in Mod Settings - Mod Settings - Car (as you select applications there, then assign buttons through the standard application, for setting the buttons on the steering wheel, for example). - you can watch the video on how to configure -
    More flexible graphic equalizer settings are in Mod Settings - Mod Settings - Sound Settings.
    Mod Settings - Mod Settings - Car - added GPS fix (enabled by default).
    Redesigned regular widgets for managing Music, Radio, Bluetooth music, etc.
    Configurable rear camera parking lines, you need to go to Settings Mod – Car - related settings – Extra settings and enable 1-2-3 type of Rear view ruler.
    EasyConnected has been updated to the latest version.
    Can't update Magisk module !! Only Magisk Manager can be updated!
    Many other fixes and additions.

    Installing FULL firmware version:

    You must download the LITE version, read the instructions inside the archive and be sure to install the LITE version on your device.

    VIDEO FULL version


    Important information (announcement of future OTA updates) - https://forum.xda-developers.com/t/...-rk3368-with-android-10.4175209/post-84457253
    Who wants to translate Settings into their native language - https://forum.xda-developers.com/an...roid-6-8-9-t3955343/post80203246#post80203246

    ----------------------------------------------
    Many thanks to the respected Graser from the 4PDA forum for invaluable help in creating the firmware!
    +++++++++++++++++++++++++++++
    This post is in edit mode! Errors and inaccuracies are possible!
    Please excuse me in advance! I very rarely answer questions and do not use private messages!
    9
    I want to write to everyone just for information, so to speak, for information :)
    The update server always contains an updated version of the firmware, so to speak, a transitional one, where fixes - additions are gradually accumulated for the next online update.
    If, for example, someone needs to reset the settings to the factory settings, then I recommend installing the LITE version of the firmware again and updating again to the Full version.
    For example, updates are now accumulated, unlike version 1.1.6:
    UPD : 09/02/2021
    - Magisk updated to the latest version 21.4
    - Manager Magisk to the latest version 8.0.7
    - In Launcher Mal Dark, the buttons on the left and right panels have been slightly redone.
    immediately open the access point settings.
    open a third-party dialer
    open MTCDialer for voice calling
    - Fixed Screen Lock
    - Fixed crash of the screensaver if it could not receive weather data from the provider. (if you installed it from an OEM application, you need to update it again after updating the firmware)
    - zlink version 4.0.14
    UPD : 11/02/2021
    - Android base from 10/17/2020
    - Fixed Easy Connect and updated to the latest version 4.1.1
    - In Settings Mod - Settings MOD - System Settings - Pop-up Notification Settings - new settings have been added:
    1. Enable display of album covers (picture)
    2. Covers display size in px (pixels) - from 10 px to 100 px (see screenshots)
    - Fixed autostart Nav Radio + after sleep (it won't start from the background)
    - Added French and Polish translation to Mod Settings (thanks to oxygen and XDA users)
    - In the Bluetooth application the panel of incoming and outgoing calls has been changed.
    For example, updates are now accumulated, unlike version 1.1.7:
    UPD : 24/03/2021
    - Android base from 02/25/2021 - only for PX5
    - Android base from 12/17/2020 - only for PX6
    - Android base from 02.10.2020 - only for PX30
    - Latest version of Magisk
    - Fixed removing the bar status (after rebooting, it reappeared)
    - Added starting services after boot and sleep
    - Added a choice of delay (from 1 to 60 seconds) of the second, third, fourth application for autorun after loading.
    - Many other additions and fixes
    UPD : 26/03/2021
    - The ability to disable the standard mechanism of autorun Radio, Music, etc. standard applications (Mod Settings - MOD Settings - System Settings - Autostart applications after system boot)
    - Fixed initialization of Wi-Fi after boot.
    - Fixed launch of Radio (when launched with zero frequency and empty radio buttons)
    UPD : 30/03/2021
    - Added Italian translation to rear camera app
    - Added the ability to adjust the sound with your finger in the soundbar
    - Added the ability to display radio station logos in the Radio application, pop-up notifications, in the screensaver.
    All Radio applications that have the ability to display logos are located in the OEM application and have the word _logos at the end of the name, for example
    HCT4Radio_MOD_Malay_logos.apk
    HLARadio_MOD_Mal_logos.apk
    MTCRadio_MAL_NEW_logos.apk
    You need to reinstall the Radio applications from the OEM.
    Question: What needs to be done to show the logos of radio stations?
    Answer:
    1. Download for example this archive of logos - https://disk.yandex.ru/d/8hmqpKHga0fQHQ or download them yourself from the Internet.
    2. The picture must be in .png format, preferably with a resolution of 250X250 px or 500X500 px (the higher the resolution, the better the picture will be shown in the screensaver)
    3. Find out the frequencies of radio stations in your city by entering into Google search "frequencies of radio stations (your city)"
    4. Rename pictures in .png format with the name of the radio station frequency. For example: there is a radio station Record, it broadcasts in your city at a frequency of 102.3 -
    rename the picture with the name 102.3.png
    5. Create a Radio folder and copy all your pictures there.
    6. Copy the Radio folder to the root of the sdcard internal memory.
    It should then look something like the screenshots:
    Screenshot_20210329-165844.png
    Screenshot_20210329-153619.png
    Screenshot_20210329-124128.png
    Screenshot_20210329-124201.png


    Well, I wrote this to keep everyone in the know, all of this will of course be in the next update, when there will be a more voluminous accumulation of fixes and everyone will receive it automatically.
    This applies to ALL PX5-PX6-PX30 units

    I will try to add information about new fixes and additions in this post! (you can bookmark it :) )
    6
    Online update version 1.1.6 has been released.
    - Fixed work of online players (for example Spotify) after sleep.
    - New Settings Mod with support for day and night
    - Fixed DPI change
    - In the bluetooth application, the display of the contact list has been redesigned
    - Updated to the latest versions of ZLINK and EasyConnect
    - Fixed showing WiFi in the notification shade.
    - Many other fixes and additions.
    4
    Online update of the full version 1.1 from 1 December 2020

    1. Added 5 attempts to initialize WiFi every 20 seconds with network availability check
    2. Added forced activation of disabled WiFi SSIDs, device why it periodically sets the working SSID status Disable and automatic connection does not occur.
    3. Brightness adjustment service. When the rear or front camera is turned on, the brightness rises to the maximum allowed
    4. The display of pop-up notifications has been changed. (Elimination of a potential error)
    5. Redesigned service, excluding the simultaneous operation of different players. Fixed a bug that caused the current player to close when going to sleep
    6. Redesigned algorithms to run ScreenSaver. It will not start when the rear camera is turned on.
    7. Elimination of various small bugs
    8. Introduced MTCDialer. Basic f1x application, redesigned to support Android 10 (voice dialing program. You need to sync
    your contacts in the bluetooth application)
    9. Added an alternative program for your contacts and calls (it is necessary to synchronize your contacts with the Google account)
    10. Added a new equalizer. You need to install it from the OEM application from the EQ_DSP folder.
    11. Fixed voice prompts in the google maps application.
    12. Added new mod applications Music 7 types. Located in the OEM application in the Music_Mod_Malay folder
    13. Added new mod applications for Radio 12 types. Are in the OEM application in the Radio_Mod_Malay folder (some have the ability to write their own radio station names)
    14. Added RDS Radio show in screensaver and in some launchers. RDS settings are - Mod settings - MOD settings - Car - RDS display settings.
    15. Fixed Lock Screen
    16. Many other corrections and additions.

    To get an update, you can go to Mod Settings - OTA updates - click on the update search button or reboot - the update menu will appear automatically.
    3
    fixed the rear camera (sometimes it turned on for 5 seconds)
    + Fixed conflict with NavRadio+ app
    + Fixed conflict with DAB app +
    + Changed optimization of work with GPS. Expanded custom GPS settings, added navigation chip mode selection
    New settings in Settings Mod - Settings MOD - Car - GPS navigation mode.


    But, until all this pulls for a new OTA update, if someone needs these changes and does not want to wait for the next update, then install the LITE version and update again. All this will already be there. You can install without any wipes (Wipe Data)
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone