• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][PX5][Q][10.0] Malaysk ROM for PX5 RK3368 with Android 10

Search This thread

ohap

Senior Member
Mar 29, 2010
224
127
austin
boostflashingforev.wix.com
ok just installed on px5 with MCU MTCH_HF_V3.74_1 mar 29 2021 , dsp chip ADAU1401A-6CH-V02 HCT-DSP 20191104. and i have no sound at all . how do i fix this ? on Hal9k Mod v5 it works . but i like malaysk cus the gps locks super fast ! . so any one know how to get audio working ??

i think i have a ideal why i have no sound or radio dont scan because the free rom is based on old android 10 ver and this hardware is from mar 29 2021
 

ohap

Senior Member
Mar 29, 2010
224
127
austin
boostflashingforev.wix.com
Did you change the MCU also? The MCU controls the hardware access. Malay's ROM is for the PX5. If you updated that with one that isn't for your radio you can have problems. Reinstall the original MCU.
no didnt update its just what the board came with . and no way to downgrade or upgrade as this is a imposable mcu file to find siecane dont share there mcu firmware's or android firmware's . also it is px5 board
 

er36po

Member
Apr 11, 2018
6
0
Only for devices processor Rockchip PX5, MCU - MTCD, MTCE Android 10.0 !

Mod Q 10.0 Android PX5 RK3368
For PX6 RK3399 mod 10 android is HERE
Only for those who have 10 android installed, a PX5 processor and have an installed MCU that starts with MTC (X) - where X can have different letters.
With firmware device, you need to understand all the risks. Neither I nor the website is not responsible for your actions and possibly killed devices! Everything you do - you do at your own peril and risk.

Before installing the firmware, be sure to try to get into the Recovery (I have this method - I press the RESET button (RST) and hold the buttons on the front panel of the device until the buttons blink - I release the RESET button and immediately press the RESET button again for a short time 1-2 times ).
IMPORTANT!!
: You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product (this is due to the fact that in 10 android these sections are dynamic and protected by the android itself from changes)- otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).

How do you know if your device is suitable for this forum thread? You can see the device in Settings - System - About device: look at the photo

What's added, fixed in LITE firmware version:
Can't update Magisk module !! Only Magisk Manager can be updated!


Root access (Magisk) 8.0.2
IMPORTANT!! : You cannot change the firmware versions in the system partitions in LITE - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
Added ESFileExplorer, RootExplorer programs.
Two modified launchers with the ability to customize them (located in Mod Settings).
Enabled the ability to start the screensaver and set the start time to 15-30 seconds 1-3-5-7-10 minutes.
By default, video viewing while driving is enabled and audio mute in Navigation is set to -3.
Changed basic Settings.
Possibility to set viewing of Internet traffic speed in the Status Bar.
Ability to change color and gradient in the Status Bar.
Many other changes and additions.

Installing LITE firmware version:

Unzip the archive and write the Update.zip file to a SD card or USB flash drive (must be formatted in FAT32). Insert into the loaded device. After a few seconds, the update menu will appear. We put a checkmark on Wipe Data (you will lose all your installed programs) and click on the Install button. See the screenshot below. The machine will reboot and the firmware installation will begin.
View attachment 5113373

Download LITE version:

Be sure to read the instructions inside the archive, along with the firmware !!!
I want to warn you: Everything that you do, you do at your own peril and risk.
Can't update Magisk module !! Only Magisk Manager can be updated!

Download: https://disk.yandex.ru/d/6YNgisrqMq3uKA
Mirror: https://mega.nz/file/0kwxXIqR#j_FHPGSlgFKFBQmo7eGCmdYEDsRrlx4GT85_MmnLYho

--------------------------------------------------
Eklenenler, TAM üretici yazılımı sürümünde düzeltildi:
Magisk modülünü güncelleyemiyorum !! Yalnızca Magisk Yöneticisi güncellenebilir!

[SAKLAMAK]
Tam kök erişimi (Magisk)
ÖNEMLİ!! : Sistem bölümlerindeki donanım yazılımı sürümlerini değiştiremezsiniz - Sistem, Satıcı, ODM ve Ürün - aksi takdirde yeniden başlattıktan sonra bir SİYAH EKRAN alırsınız ve KURTARMA'ya gitmeniz ve oradan üretici yazılımını yeniden yüklemeniz gerekir (verileri silmeden yapabilirsiniz) ).
Müzik dinlemek (herhangi bir müzik uygulaması), Bluetooth müzik ve radyo istasyonları için etiketleri görüntüleme özelliğine sahip tamamen değiştirilmiş yedi başlatıcı.
Başlatıcıları özelleştirme (ayarlarda gereksiz işlevleri etkinleştirin, devre dışı bırakın) ve içlerindeki hava durumu ayarlarını ve hızı GPS ile görüntüleme yeteneği.
GPS hızını, hava durumunu, müzik dinleme etiketlerini (herhangi bir müzik uygulaması) görüntüleme özelliğine sahip analog ve dijital saatli 4 tip ekran koruyucu,
Radyo uygulamasından Bluetooth müzik ve radyo istasyonları. Ekran koruyucuların tam olarak özelleştirilmesi - renk, yazı tipi, gereksiz işlevlerin devre dışı bırakılması, araç logonuz vb. Ayarlarda.
Açılış ekranını değiştirin - parmağınızı ekranın ortasında 3-5 saniye basılı tutun - görünüm değişecektir. Diğer ekran koruyucular OEM uygulamasındadır.
Ses seviyesi çubuğunu değiştirdi ve kaybolma süresini azalttı. Ayrıca Ayarlar Mod - Mod ayarları - Ses ayarlarında tamamen yapılandırılabilir.
Ayarlarda bulunan butonları ve simgeleri etkinleştirme ve devre dışı bırakma özelliği ile tamamen özelleştirilebilir panel durumu ve tamamen devre dışı bırakmak mümkündür.
Durum çubuğuna yeniden yükleme anahtarı eklendi.
Durum çubuğuna "Ekran Koruyucu", "Müzik", "Navigasyon", "Bluetooth Müzik" düğmeleri eklendi (ayarlardan etkinleştirilebilir veya devre dışı bırakılabilir).
Durum çubuğundaki parlaklık panelini çağırma işlevi değiştirildi.
Ekran koruyucu artık tüm programlarda başlatılıyor, Mod Ayarlarında, ekran koruyucunun başlamayacağı uygulamaları belirleyebileceğiniz bir Uygulama Beyaz Listesi var.
Uykudan sonra otomatik başlatmayı belirtebileceğiniz Mod ayarlarına bir uygulama listesi eklendi.
ViperFX ekolayzır eklendi - ayarları videodan izleyebilirsiniz
Bluetooth Müzik uygulaması değiştirildi.
Uygulamalar Müzik, Radyo, Video tamamen değiştirildi. OEM uygulamasından standart uygulamaları yükleyebilirsiniz.
Video dosyaları arka planda oynatılabilir.
Artık arka görüş kamerasını açtığınızda parlaklık otomatik olarak maksimuma çıkıyor
OEM uygulamasına 4 farklı türde radyo uygulaması eklendi (Gündüz ve Gece destekli radyo dahil)
OEM uygulamasına gidin ve oradan uygulamayı yükleyin.
OEM uygulamasına 3 farklı türde Müzik uygulaması eklendi.
Bölünmüş ekran desteği (tüm uygulamalar desteklenmez)
Çevrimiçi radyo PCRadio eklendi
Mod ayarları - MOD Ayarları - Sistem ayarları - GPS ile otomatik ekran parlaklığı eklendi.
1280X720 ve 1024X600 ekran çözünürlüklerini destekler.
Programlarınızı başlatmak için ekran koruyuculara dört özelleştirilebilir düğme eklendi.
- Düğmeye uzun basın - uygulamayı seçin.
- Düğmeye kısa basın - uygulamayı başlatın.
Artık uygulamalarınızı başlatmak için MOD düğmesini yapılandırabilirsiniz.
- Mod Ayarları - MOD Ayarları - Sistem Ayarları - MODE düğmesine basarak başlatılacak uygulamaları seçin.
- Devre dışı bırakılırsa, MODE düğmesinin standart çalışma yöntemi kullanılır (Radyo-Müzik-Video'nun başlatılması)
Sesi GPS hızına göre otomatik olarak ayarlama özelliği eklendi.
Ayarlar modunda bulunur - MOD Ayarları - Ses ayarları - GPS ile otomatik ses kontrolü.
Müzik, Radyo, Bluetooth müzik ve PCRadio çalma hakkında açılır mesajlar ayarlama özelliği eklendi.
Mod Ayarları - MOD Ayarları - Sistem Ayarları - Açılır Pencere Ayarları bölümünde bulunur.
Sabit GPS çalışması.
- Geliştirilmiş konum doğruluğu.
- Soğuk başlatma ile - uydular 40-70 saniye içinde bulunur.
- Sıcak başlatma ile (uykudan veya yeniden başlatmadan sonra) - anında.
USB bağlantı noktaları veya eksik WiFi sorunu yaşayan herkes - düzeltildi.
Sistem tamamen önyüklendikten ve uykudan sonra USB ve WiFi başlatılır.
Uykudan sonra çalıştırılacak programların beyaz listesinin yeni yöntemi ve ayarları (Mod Ayarları - Mod Ayarları - Sistem Ayarları'nda bulunur)
Ekran koruyucunun başlamadığı programlar için yeni beyaz liste (Mod Ayarları - Mod Ayarları - Ekran Koruyucu Ayarları'nda bulunur)
Gündüz ve gece desteğiyle yeniden tasarlanan Başlatıcı. Ayrıca, yapılandırmak için Mod Ayarları - Mod Ayarları - Başlatıcılara eklendi. Ana ekranın görüntüsünü özelleştirebilirsiniz
- Saat, GPS hızı, Hava Durumu veya logonuzu görüntülemeyi seçin (İnternetten bir logo indirin (örneğin, bir BMW otomobil logosu),
PNG formatında ve tercihen şeffaf bir arka plan ile ve dosyayı cihazın dahili belleğine kopyalayın)
Bellenimi güncelledikten sonra, sistem her başlatıldığında başlatıcı için konum izinleri istenirse, Mod Ayarları - Mod Ayarları - bölümüne gidin.
Başlatıcı Ayarları - Gündüz ve gece desteğine sahip başlatıcı ve GPS hız gösterimini etkinleştirin.
Müzik ve Ekran Koruyucu uygulamalarında dört farklı grafik ekolayzır ve renk seçimi ile yeni grafik ekolayzır.
Artık Mod Ayarlarında müzik ve radyo bildirimlerini gösterme süresini 1 ila 10 saniye arasında ayarlayabilirsiniz.
Ekranın DPI değerini değiştirebilirsiniz. Aralık 260dpi ile 160dpi arasındadır (varsayılan olarak standart 220) - 200dpi olarak ayarladım. Bulunan - Mod Ayarları - Mod Ayarları - Sistem Ayarları.
Direksiyon simidi üzerindeki veya cihazın ön panelindeki düğmelere uygulamalarınızın başlatılmasını atayabilirsiniz. Mod Ayarları - Mod Ayarları - Araba'da bulunur (buradaki uygulamaları seçtiğinizde, ardından örneğin direksiyondaki düğmeleri ayarlamak için standart uygulama aracılığıyla düğmeler atayın). - nasıl yapılandırılacağı ile ilgili videoyu izleyebilirsiniz -
Daha esnek grafik ekolayzer ayarları Mod Ayarları - Mod Ayarları - Ses Ayarları bölümündedir.
Mod Ayarları - Mod Ayarları - Araba - GPS düzeltmesi eklendi (varsayılan olarak etkindir).
Müzik, Radyo, Bluetooth müzik vb. yönetmek için yeniden tasarlanmış düzenli widget'lar.
Yapılandırılabilir arka kamera park hatları, Ayarlar Modu - Araba ile ilgili ayarlar - Ekstra ayarlara gitmeniz ve 1-2-3 tip Arka görüş cetvelini etkinleştirmeniz gerekir.
EasyConnected en son sürüme güncellendi.
Magisk modülünü güncelleyemiyorum !! Yalnızca Magisk Yöneticisi güncellenebilir!
Diğer birçok düzeltme ve ekleme.
[/SAKLAMAK]
TAM üretici yazılımı sürümünün yüklenmesi:
[SAKLAMAK]
LITE sürümünü indirmeli, arşivdeki talimatları okumalı ve cihazınıza LITE sürümünü kurduğunuzdan emin olmalısınız.
[/SAKLAMAK]
VİDEO TAM sürüm
[SAKLAMAK]
 

Attachments

  • Ekran görüntüsü 2021-09-25 231206.jpg
    Ekran görüntüsü 2021-09-25 231206.jpg
    41.3 KB · Views: 39

Malaysk

Senior Member
Jan 31, 2011
1,705
5,839
Hello, it gives such an error when the installation is at the completion stage. What is the reason for this?
System PX5/ MTCE_MX_V3.45_1
Hello. Try to go to Recovery and make Wipe Data there.
(I have this method - I press the RESET button (RST) and hold the buttons on the front panel of the device until the buttons blink - I release the RESET button and immediately press the RESET button again for a short time 1-2 times )
 

er36po

Member
Apr 11, 2018
6
0
Hello. Try to go to Recovery and make Wipe Data there.
(I have this method - I press the RESET button (RST) and hold the buttons on the front panel of the device until the buttons blink - I release the RESET button and immediately press the RESET button again for a short time 1-2 times )
Thanks for the answer.
The problem was on the SD floor...
I was able to install it with a different SD card and it works fine. Thanks
 

Alfry993

New member
Dec 14, 2010
4
0
Good evening, do you think it's normal that after resetting the radio got stuck on the recovery? Help me, thank you
 

Attachments

  • 7E977AC7-04E2-49BD-A313-C44B3451EB64.jpeg
    7E977AC7-04E2-49BD-A313-C44B3451EB64.jpeg
    1.2 MB · Views: 23

Malaysk

Senior Member
Jan 31, 2011
1,705
5,839
Updated LITE firmware version in the first message.
New android base, applications updated. MCU MTCH support. Other updates.
 

lukasz_800

New member
Sep 11, 2020
4
1
Hello,
Recently I added voltage information to the status bar. Unfortunately, the reading is lowered by about 0.5V. I found voltage readings corrections in the settings, but when the slider is set to both extreme positions (restart performed), the value does not change. The radio is connected to a power supply with a constant voltage of 12.2V and the reading is at the level of 11.7 - 11.8V. I have the latest version of the software.
Is there any way to remove this offset? Maybe I'm doing something wrong?
 

Malaysk

Senior Member
Jan 31, 2011
1,705
5,839
Online update FULL 1.2 has been added to the BETA section.
You can download and install in Settings Mod - OTA updates - Beta version.

Improved overall performance.
GPS signal processing changes.
Gps Parser has been completely rewritten from scratch, support with A-GPS data from the chip has been added, positioning accuracy in open areas has been increased to 1 meter. (for PX5 - PX6)
In Settings Mod - Mod settings - Car - added a new setting to change the GPS grouping - Replace GPS + GLONAS with GPS + BEIDOU
Improved location accuracy to 0-1 meters.
Added the function "Change commands for switching tracks using the right wheel (spinner)" - in Settings Mod - Mod settings - Car. If your right wheel does not switch music tracks in third-party players, you can try turning it on.
Fixed screensaver (stop clock)
Corrected HLA applications from OEM.
Many other fixes.
 

Attachments

  • GPS2.png
    GPS2.png
    80 KB · Views: 18
  • GPS1.png
    GPS1.png
    80.3 KB · Views: 19
  • GPS3.png
    GPS3.png
    79.8 KB · Views: 16
  • GPS4.png
    GPS4.png
    160.2 KB · Views: 15
  • GPS5.png
    GPS5.png
    159 KB · Views: 18
Last edited:

Virus1988

Member
Sep 30, 2021
12
2
Zlink problem solved

I have been working through the installation of a Wondefoo Headunit. I purchased the unit off AliExpress. The headunit has zlink installed. I have an iPhone so was using it for Carplay. Bluetooth and WIFI connect okay to the headunit. The first time I booted up the unit zLink connected and Carplay worked. The device is connected to constant 12v power so it powers off to sleep mode and warm starts the next time the ACC power is activated. After the device powered off to sleep mode it would not reconnect to zLink on restart. The "Connecting" message would cycle until I got MFi Hardware Fail, MFi IC Fail and MFi Read Fail #2 messages. If I rebooted the unit, either by disconnecting from constant power or using RST button zLink would then connect, but would fail to connect after next sleep phase. The supplier was no help. I thought it must be a power issue so I worked through the power options on the factory settings menu. Changing the default power mode from "On" to "Memory Status of Last" fixed the problem and zLink now connects automatically on start up. I hope this helps.


Malay activate this option in the next update, thx
 
Last edited:

Virus1988

Member
Sep 30, 2021
12
2
This can be done in Settings Mod - Car-Related settings - Extra settings - Shutdown delay wnen ACC OFF
I think I'm stupid xDD I don't know how to remove this ... and I can't find this option ´´Changing the default power mode from "On" to "Memory Status of Last"....
 

Attachments

  • Screenshot_20201007-165807.png
    Screenshot_20201007-165807.png
    207.4 KB · Views: 12

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    Online update FULL 1.2 has been added to the BETA section.
    You can download and install in Settings Mod - OTA updates - Beta version.

    Improved overall performance.
    GPS signal processing changes.
    Gps Parser has been completely rewritten from scratch, support with A-GPS data from the chip has been added, positioning accuracy in open areas has been increased to 1 meter. (for PX5 - PX6)
    In Settings Mod - Mod settings - Car - added a new setting to change the GPS grouping - Replace GPS + GLONAS with GPS + BEIDOU
    Improved location accuracy to 0-1 meters.
    Added the function "Change commands for switching tracks using the right wheel (spinner)" - in Settings Mod - Mod settings - Car. If your right wheel does not switch music tracks in third-party players, you can try turning it on.
    Fixed screensaver (stop clock)
    Corrected HLA applications from OEM.
    Many other fixes.
    1
    after updating the full version 1.2, gps does not work
    Please try to go to Settings Mod. Then try to reboot (you can use the reboot button in the StatusBar). Please wait 10-12 minutes after reboot. If the problem persists, please email me.
    1
    Please try to go to Settings Mod. Then try to reboot (you can use the reboot button in the StatusBar). Please wait 10-12 minutes after reboot. If the problem persists, please email me.
    already working i installed a new lite version and updated online it's ok now thank you
  • 14
    Only for devices processor Rockchip PX5, MCU - MTCD, MTCE Android 10.0 !

    Mod Q 10.0 Android PX5 RK3368
    For PX6 RK3399 mod 10 android is HERE
    Only for those who have 10 android installed, a PX5 processor and have an installed MCU that starts with MTC (X) - where X can have different letters.
    With firmware device, you need to understand all the risks. Neither I nor the website is not responsible for your actions and possibly killed devices! Everything you do - you do at your own peril and risk.

    Before installing the firmware, be sure to try to get into the Recovery (I have this method - I press the RESET button (RST) and hold the buttons on the front panel of the device until the buttons blink - I release the RESET button and immediately press the RESET button again for a short time 1-2 times ).
    IMPORTANT!!
    : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product (this is due to the fact that in 10 android these sections are dynamic and protected by the android itself from changes)- otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).

    How do you know if your device is suitable for this forum thread? You can see the device in Settings - System - About device: look at the photo

    What's added, fixed in LITE firmware version:
    Can't update Magisk module !! Only Magisk Manager can be updated!


    Root access (Magisk) 8.0.2
    IMPORTANT!! : You cannot change the firmware versions in the system partitions in LITE - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
    Added ESFileExplorer, RootExplorer programs.
    Two modified launchers with the ability to customize them (located in Mod Settings).
    Enabled the ability to start the screensaver and set the start time to 15-30 seconds 1-3-5-7-10 minutes.
    By default, video viewing while driving is enabled and audio mute in Navigation is set to -3.
    Changed basic Settings.
    Possibility to set viewing of Internet traffic speed in the Status Bar.
    Ability to change color and gradient in the Status Bar.
    Many other changes and additions.

    Installing LITE firmware version:

    Unzip the archive and write the Update.zip file to a SD card or USB flash drive (must be formatted in FAT32). Insert into the loaded device. After a few seconds, the update menu will appear. We put a checkmark on Wipe Data (you will lose all your installed programs) and click on the Install button. See the screenshot below. The machine will reboot and the firmware installation will begin.
    1111.png

    Download LITE version:
    Version updated as of September 28, 2021.


    Be sure to read the instructions inside the archive, along with the firmware !!!
    I want to warn you: Everything that you do, you do at your own peril and risk.
    Can't update Magisk module !! Only Magisk Manager can be updated!

    Download: https://disk.yandex.ru/d/dCgwRD1TahNHfw
    Mirror: https://mega.nz/file/4kwgQZSZ#_ZyBC55W7q6c67Gy1TGsGAWFjqa6RD_eGuInoGiW-pY

    ----------------------------------------------
    What's added, fixed in FULL firmware version:
    Can't update Magisk module !! Only Magisk Manager can be updated!


    Full root access (Magisk)
    IMPORTANT!! : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
    Seven completely modified launchers with the ability to view tags for listening to music (any music app), Bluetooth music and radio stations.
    The ability to customize Launchers (enable, disable unnecessary functions in the settings) and weather settings in them and display the speed via GPS.
    4 types of screen savers with analog and digital clocks, with the ability to display GPS speed, weather, music listening tags (any music application),
    Bluetooth music and radio stations from the Radio app. Full customization of screensavers - color, font, disabling unnecessary functions, your car logo, etc. In the settings.
    Change splash screen - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM app.
    Changed the volume bar and reduced its disappearance time. It is also fully configurable in Settings Mod - Mod settings - Sound settings.
    Fully customizable panel status with the ability to enable and disable buttons and icons in it in the settings and it is possible to completely disable it.
    Reload key added to the status bar.
    Added buttons "Screensaver", "Music", "Navigation", "Bluetooth Music" in the status bar (can be enabled or disabled in the settings).
    Changed the function of calling the brightness panel in the status bar.
    The screensaver is now launched in all programs, in the Mod Settings there is an Application Whitelist, where you can specify applications where the screensaver will not start.
    Added a list of applications in the Mod settings, where you can specify autostart after sleep.
    Added equalizer ViperFX - you can watch the settings in the video
    Changed Bluetooth Music app.
    Applications Music, Radio, Video have been completely changed. You can install standard applications from the OEM application.
    Video files can be played in the background.
    Now when you switch on rear view camera the brightness is in creased up to maximum automatically
    4 different types of radio apps have been added in the OEM app (including radio with Day and Night support)
    Go to the OEM app and install the app from there.
    3 different types of Music app have been added in the OEM app.
    Split screen support (not all apps support)
    Added online radio PCRadio
    Mod settings - MOD Settings - System settings - added automatic screen brightness by GPS.
    Supports 1280X720 and 1024X600 screen resolutions.
    Added four customizable buttons to screensavers to launch your programs.
    - Long press on the button - select the application.
    - Short press on the button - start the application.
    You can now configure the MODE button to launch your applications.
    - Located in Mod Settings - MOD Settings - System Settings - Select applications to launch by pressing the MODE button.
    - If it is disabled, the standard method of operation of the MODE button is used (launching Radio-Music-Video)
    Added the ability to automatically adjust the sound based on GPS speed.
    Located in Settings mod - MOD Settings - Sound settings - Auto volume control by GPS.
    Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
    Located in Mod Settings - MOD Settings - System Settings - Popup Settings.
    Fixed GPS work.
    - Improved location accuracy.
    - With a cold start - satellites are located in 40-70 seconds.
    - With a hot start (after sleep or reboot) - instantly.
    Anyone who had problems with USB ports or missing WiFi - fixed.
    USB and WiFi are initialized after the system is fully booted and after sleep.
    New method and settings of the whitelist of programs to run after sleep (located in Mod Settings - Mod Settings - System Settings)
    New whitelist for programs in which the screensaver will not start (located in Mod Settings - Mod Settings - Screensaver Settings)
    Redesigned Launcher with day and night support. Also added to Mod Settings - Mod Settings - Launchers to configure it. You can customize the display of the main screen
    - Clock, GPS speed, Weather or choose to display your logo (download a logo on the Internet (for example, a BMW car logo),
    in PNG format and preferably with a transparent background and copy the file to the device's internal memory)
    If after updating the firmware, every time the system boots, the location permissions for the launcher are asked, go to Mod Settings - Mod Settings -
    Launcher Settings - Launcher with day and night support and enable GPS speed display.
    New graphic equalizer in Music and Screensaver apps, with four different graphic equalizers and color selection.
    You can now set the time for showing music and radio notifications in Mod Settings from 1 to 10 seconds.
    You can change the DPI of the screen. The range is from 260dpi to 160dpi (standard 220 by default) - I set it to 200dpi. Located - Mod Settings - Mod Settings - System Settings.
    You can assign the launch of your applications to the buttons on the steering wheel or on the front panel of the device. Located in Mod Settings - Mod Settings - Car (as you select applications there, then assign buttons through the standard application, for setting the buttons on the steering wheel, for example). - you can watch the video on how to configure -
    More flexible graphic equalizer settings are in Mod Settings - Mod Settings - Sound Settings.
    Mod Settings - Mod Settings - Car - added GPS fix (enabled by default).
    Redesigned regular widgets for managing Music, Radio, Bluetooth music, etc.
    Configurable rear camera parking lines, you need to go to Settings Mod – Car - related settings – Extra settings and enable 1-2-3 type of Rear view ruler.
    - In Mod Settings - MOD Settings - System Settings - Pop-up Notification Settings - added settings:
    1. Enable display of album covers (picture)
    2. Covers display size in px (pixels) - from 10 px to 100 px
    - Fixed autostart Nav Radio + after sleep (it won't start from the background)
    - Added French and Polish translation to Mod Settings (thanks to oxygen and XDA users)
    - In the Bluetooth application, the panel for incoming and outgoing calls has been changed.
    - Added display of covers from players (including standard player, online players, third-party players) in the screensaver. - only for PX5 and PX6, if the screensaver was installed from the OEM application before, then you need to reinstall it from there.
    Located in Mod Settings - Mod Settings - Screensaver Settings
    1. Enable display of covers (on by default)
    2. Set the transparency level of the picture
    - Added the ability to display radio station logos in the Radio application, pop-up notifications, in the screensaver.
    All Radio applications that have the ability to display logos are in the OEM application and have the word _logos at the end of the name, for example
    HCT4Radio_MOD_Malay_logos.apk
    HLARadio_MOD_Mal_logos.apk
    MTCRadio_MAL_NEW_logos.apk
    Question: What needs to be done to show the logos of radio stations?
    Answer :
    1. Download, for example, this archive of logos - https://disk.yandex.ru/d/696euyOc9YLmiQ or download them from the Internet.
    2. The picture must be in .png format, preferably with a resolution of 250X250 px or 500X500 px (the higher the resolution, the better the picture will be shown in the screensaver)
    3. Find out the frequencies of radio stations in your city by entering into Google search "frequencies of radio stations (your city)"
    4. Rename pictures in .png format with the name of the radio station frequency. For example: there is a radio station Record, it broadcasts in your city at a frequency of 102.3 -
    rename the picture with the name 102.3.png.
    5. Create a Radio folder and copy all your pictures there.
    6. Copy the Radio folder to the root of the sdcard internal memory.
    - Ability to disable autorun of standard applications after loading or after sleep. Located in Settings MOD - Mod Settings - System Settings - Autostart applications after sleep / reboot - Disable the regular autostart mechanism for Radio, Music, BT.
    - Ability to change the theme Day - Night automatically by Auto screen brightness by GPS. Located in Settings MOD - Settings Mod - System Settings - Auto screen brightness by GPS - Change automatically the Day / Night theme (it is advisable to reboot later so that the changes apply)
    - Added DFX Light Processing 2 impulse to ViperFX, which radically changes the sound on the device. It needs to be activated in ViperFX.
    - Improved overall work speed.
    - Changes to GPS signal processing.
    - Completely rewritten from scratch Gps Parser, added support for A-GPS data from the chip side, positioning accuracy in open areas increased to 0-1 meters. (for PX5 - PX6)
    - In Mod Settings - Mod settings - Car - added a new setting to change the GPS grouping - Replacing GPS + GLONAS with GPS + BEIDOU
    - Added the function "Change commands for switching tracks using the right wheel (spinner)" - in Settings Mod - Mod settings - Car. If your right wheel does not switch music tracks in third-party players, you can try turning it on.
    EasyConnected has been updated to the latest version.
    Can't update Magisk module !! Only Magisk Manager can be updated!
    Many other fixes and additions.

    Installing FULL firmware version:

    You must download the LITE version, read the instructions inside the archive and be sure to install the LITE version on your device.

    VIDEO FULL version


    Online update 1.1.8.5 released on August 12, 2021
    Online update 1.2 released on 02 October, 2021

    Sample ViperFX settings -



    Important information (announcement of future OTA updates) - https://forum.xda-developers.com/t/...-rk3368-with-android-10.4175209/post-84457253
    Who wants to translate Settings into their native language - https://forum.xda-developers.com/an...roid-6-8-9-t3955343/post80203246#post80203246

    ----------------------------------------------
    Many thanks to the respected Graser from the 4PDA forum for invaluable help in creating the firmware!
    +++++++++++++++++++++++++++++
    This post is in edit mode! Errors and inaccuracies are possible!
    Please excuse me in advance! I very rarely answer questions and do not use private messages!
    12
    I want to write to everyone just for information, so to speak, for information :)
    The update server always contains an updated version of the firmware, so to speak, a transitional one, where fixes - additions are gradually accumulated for the next online update.
    If, for example, someone needs to reset the settings to the factory settings, then I recommend installing the LITE version of the firmware again and updating again to the Full version.
    For example, updates are now accumulated, unlike version 1.1.6:
    UPD : 09/02/2021
    - Magisk updated to the latest version 21.4
    - Manager Magisk to the latest version 8.0.7
    - In Launcher Mal Dark, the buttons on the left and right panels have been slightly redone.
    immediately open the access point settings.
    open a third-party dialer
    open MTCDialer for voice calling
    - Fixed Screen Lock
    - Fixed crash of the screensaver if it could not receive weather data from the provider. (if you installed it from an OEM application, you need to update it again after updating the firmware)
    - zlink version 4.0.14
    UPD : 11/02/2021
    - Android base from 10/17/2020
    - Fixed Easy Connect and updated to the latest version 4.1.1
    - In Settings Mod - Settings MOD - System Settings - Pop-up Notification Settings - new settings have been added:
    1. Enable display of album covers (picture)
    2. Covers display size in px (pixels) - from 10 px to 100 px (see screenshots)
    - Fixed autostart Nav Radio + after sleep (it won't start from the background)
    - Added French and Polish translation to Mod Settings (thanks to oxygen and XDA users)
    - In the Bluetooth application the panel of incoming and outgoing calls has been changed.
    For example, updates are now accumulated, unlike version 1.1.7:
    UPD : 24/03/2021
    - Android base from 02/25/2021 - only for PX5
    - Android base from 12/17/2020 - only for PX6
    - Android base from 02.10.2020 - only for PX30
    - Latest version of Magisk
    - Fixed removing the bar status (after rebooting, it reappeared)
    - Added starting services after boot and sleep
    - Added a choice of delay (from 1 to 60 seconds) of the second, third, fourth application for autorun after loading.
    - Many other additions and fixes
    UPD : 26/03/2021
    - The ability to disable the standard mechanism of autorun Radio, Music, etc. standard applications (Mod Settings - MOD Settings - System Settings - Autostart applications after system boot)
    - Fixed initialization of Wi-Fi after boot.
    - Fixed launch of Radio (when launched with zero frequency and empty radio buttons)
    UPD : 30/03/2021
    - Added Italian translation to rear camera app
    - Added the ability to adjust the sound with your finger in the soundbar
    - Added the ability to display radio station logos in the Radio application, pop-up notifications, in the screensaver.
    All Radio applications that have the ability to display logos are located in the OEM application and have the word _logos at the end of the name, for example
    HCT4Radio_MOD_Malay_logos.apk
    HLARadio_MOD_Mal_logos.apk
    MTCRadio_MAL_NEW_logos.apk
    You need to reinstall the Radio applications from the OEM.
    Question: What needs to be done to show the logos of radio stations?
    Answer:
    1. Download for example this archive of logos - https://disk.yandex.ru/d/8hmqpKHga0fQHQ or download them yourself from the Internet.
    2. The picture must be in .png format, preferably with a resolution of 250X250 px or 500X500 px (the higher the resolution, the better the picture will be shown in the screensaver)
    3. Find out the frequencies of radio stations in your city by entering into Google search "frequencies of radio stations (your city)"
    4. Rename pictures in .png format with the name of the radio station frequency. For example: there is a radio station Record, it broadcasts in your city at a frequency of 102.3 -
    rename the picture with the name 102.3.png
    5. Create a Radio folder and copy all your pictures there.
    6. Copy the Radio folder to the root of the sdcard internal memory.
    It should then look something like the screenshots:
    Screenshot_20210329-165844.png
    Screenshot_20210329-153619.png
    Screenshot_20210329-124128.png
    Screenshot_20210329-124201.png


    UPD : 09/05/2021
    Added DFX Light Processing 2 impulse to ViperFX, which radically changes the sound on the device. It needs to be activated in ViperFX.
    Added partial support for a screen resolution of 1920x1080 (for new devices that have such a screen resolution, not all applications can be installed from OEM applications). I can’t check it myself, there is no such screen.
    Updated Magisk to the latest version.
    Ability to disable autorun of standard applications after loading or after sleep. Located in Settings MOD - Mod Settings - System Settings - Autostart applications after sleep / reboot - Disable the regular autostart mechanism for Radio, Music, BT.
    The ability to change the theme Day - Night automatically by Auto screen brightness by GPS. Located in Settings MOD - Settings Mod - System settings - Auto screen brightness by GPS - Change automatically the Day / Night theme (it is advisable to reboot later so that the changes apply)
    New screensaver in the OEM application. Name - MTCScreenClock_NEW_Factory.
    Fixed theme in MOD Settings.
    Updated launcher - Launcher 10 android to the latest version.
    Fixed bluetooth application HCT4BlueTooth_Mod for light theme (reinstall it from OEM application)
    Added Portuguese translation - thanks to Nuno
    Many other fixes and additions.
    UPD : 18/05/2021
    Fixed the equalizer, which is in the OEM application - HCT7AmpSetup_NEW (did not save the settings after reboot) - you need to reinstall it from the OEM application.
    Fixed light theme in Launcher 10 android. Added the ability to change the launch of applications in the bottom bar for buttons.
    - Long press on the button - select the launched application
    - Short press - launch the application


    Well, I wrote this to keep everyone in the know, all of this will of course be in the next update, when there will be a more voluminous accumulation of fixes and everyone will receive it automatically.
    This applies to ALL PX5-PX6-PX30 units

    I will try to add information about new fixes and additions in this post! (you can bookmark it :) )
    6
    Online update version 1.1.6 has been released.
    - Fixed work of online players (for example Spotify) after sleep.
    - New Settings Mod with support for day and night
    - Fixed DPI change
    - In the bluetooth application, the display of the contact list has been redesigned
    - Updated to the latest versions of ZLINK and EasyConnect
    - Fixed showing WiFi in the notification shade.
    - Many other fixes and additions.
    5
    Restoring the PX5 MTCE device on the 10 android.
    Also, using this method, go from 6-8-9 android to 10 android.
    I want to warn you: Everything that you do, you do at your own peril and risk.
    Create bootable SD card 10 Android PX5.
    Important!!! : very demanding on the type of SD card !! I started installing the firmware when I changed 5 different SD cards from different manufacturers !!!!!
    1. Unzip the bootable_sd_card_10_android_PX5 archive to C:/ disk on a laptop or computer.
    2. Run SD_Firmware_Tool.exe (as administrator)
    3. Select the firmware in .IMG - update_10_android_zavod_PX5.img
    4. Click on the Create button.
    5. After creating the SD card, insert it into the device and reboot it. The firmware installation will start automatically. Installation will take a very long time, about 40-60 minutes !!!!!
    Restoring a SD card after restoring the device:

    Download: https://mega.nz/file/chwAVI4A#_DHfhpxGEnswyhTk1K4tjps5ohS64N5Cjz0GQOLMVsU
    4
    Online update of the full version 1.1 from 1 December 2020

    1. Added 5 attempts to initialize WiFi every 20 seconds with network availability check
    2. Added forced activation of disabled WiFi SSIDs, device why it periodically sets the working SSID status Disable and automatic connection does not occur.
    3. Brightness adjustment service. When the rear or front camera is turned on, the brightness rises to the maximum allowed
    4. The display of pop-up notifications has been changed. (Elimination of a potential error)
    5. Redesigned service, excluding the simultaneous operation of different players. Fixed a bug that caused the current player to close when going to sleep
    6. Redesigned algorithms to run ScreenSaver. It will not start when the rear camera is turned on.
    7. Elimination of various small bugs
    8. Introduced MTCDialer. Basic f1x application, redesigned to support Android 10 (voice dialing program. You need to sync
    your contacts in the bluetooth application)
    9. Added an alternative program for your contacts and calls (it is necessary to synchronize your contacts with the Google account)
    10. Added a new equalizer. You need to install it from the OEM application from the EQ_DSP folder.
    11. Fixed voice prompts in the google maps application.
    12. Added new mod applications Music 7 types. Located in the OEM application in the Music_Mod_Malay folder
    13. Added new mod applications for Radio 12 types. Are in the OEM application in the Radio_Mod_Malay folder (some have the ability to write their own radio station names)
    14. Added RDS Radio show in screensaver and in some launchers. RDS settings are - Mod settings - MOD settings - Car - RDS display settings.
    15. Fixed Lock Screen
    16. Many other corrections and additions.

    To get an update, you can go to Mod Settings - OTA updates - click on the update search button or reboot - the update menu will appear automatically.