[ROM][PX5][Q][10.0] Malaysk ROM for PX5 RK3368 with Android 10

Search This thread
OK. I'm running the full version now. Trying to get Wadzio's sound processor mod running as i had it before and it was perfect. For the root version you are supposed to copy it to the /system/apps folder but I can't get it to go. System folder is read only and I can't seem to change that. New warning at boot up says something about not changing certain things, is this ,ethod blocked? Do I have to run the non root version?

Following instructions from this post : https://forum.xda-developers.com/t/mod-mcu-bd375xx-sound-processor.3834657/post-79913114
 

SULTAA321

New member
Oct 8, 2022
4
0
أهلا وسهلا
لدي جهاز وأريد تحديثه ، لكنني لا أفهم الروابط التي يجب وضعها أو استخدامها
إذا كان لديك مقطع فيديو ، فيرجى إظهاره حتى أفهمه
لان اللغة الانجليزية ضعيفة
تعبت من البحث عن تحديث

photo-software-bengkel-gratis (580 x 300).png
 

SULTAA321

New member
Oct 8, 2022
4
0
Welcome
I have a device and I want to update it, but I do not understand the links to put or use
If you have a video, please show it so that I can understand
Because the English language is weak
Tired of searching for an update
 

fa1ah

New member
Oct 28, 2022
3
0
Ksa
View attachment 5745817
i’m stuck here after updating to the full version
Any solution?
So after several trying to enter the recovery mode but it wouldn't “ Because my Head unit is stuck”

So…
i figured a method with it you can pass Stock boot logo, you need to have a reverse camera by the way , in the middle of booting put the car in the reverse the camera well pop-up then return to N , it will start again :)

Mod. Translation:
As for my brothers, their English is medium
If the screen hangs with you on the logo
The way you set it with me, but it must have a rear camera
If I fall in love with you Rios, the camera will turn on
Then go back to N
He will complete and unpack the comment. I tried it like this once, and you really adjust every time I do it
No flash or update
And there is a solution if you don't have a camera
Behind the screen, there is always a pink wire written on it
Back , reverse ..
Pull out any positive power source “from the same screen as normal” and plug it into it, it will give the screen a command that it activates the camera and then disconnect it
And I will be with you :)

اما اخواني الي انجليزيتهم وسط
اذا الشاشه معلقه معك على الشعار
الطريقه ذي ضبطت معي بس لازم تكون فيه كاميرا خلفيه
اذا علقت معك عشق ريوس راح تشتغل الكاميرا
بعدها رجع على N
راح يكمل ويفك التعليق جربتها كذا مره وفعلا تضبط كل مره اسويها
بدون فلاش او تحديث
وفيه حل اذا ماعندك كاميرا
خلف الشاشه دايم فيه سلك لونه وردي مكتبو عليه
Back , reverse ..
اسحب اي مصدر كهرباء موجب "من نفس الشاشه عادي" واشبكه فيه راح يعطي للشاشه امر انه يفعل الكاميرا وبعدها افصله
وبيفك معك :)
 
Last edited by a moderator:

fa1ah

New member
Oct 28, 2022
3
0
Ksa
Welcome
I have a device and I want to update it, but I do not understand the links to put or use
If you have a video, please show it so that I can understand
Because the English language is weak
Tired of searching for an update
View attachment 5745439
لا تتعب نفسك هنا التحديث ذا مايضبط لك

رح للموضوع ذا تقدر ترقي جهازك من ٨ الى ١٠

https://forum.xda-developers.com/t/...ctx-head-units-with-android-10-9-8-6.4314163/

وهنا شرح بالفيديو

Mod. Translation:
Don't bother yourself, here is the update that's right for you



Go to the topic if you can upgrade your device from 8 to 10



https://forum.xda-developers.com/t/...5-for-mtcx-hctx-head-units-with-android-10-9- 8-6.4314163/



Here is a video explanation
 
Last edited by a moderator:

SULTAA321

New member
Oct 8, 2022
4
0
لا تتعب نفسك هنا التحديث ذا مايضبط لك

رح للموضوع ذا تقدر ترقي جهازك من ٨ الى ١٠

https://forum.xda-developers.com/t/...ctx-head-units-with-android-10-9-8-6.4314163/

وهنا شرح بالفيديو

Mod. Translation:
Don't bother yourself, here is the update that's right for you



Go to the topic if you can upgrade your device from 8 to 10



https://forum.xda-developers.com/t/...5-for-mtcx-hctx-head-units-with-android-10-9- 8-6.4314163/



Here is a video explanation
I thank you, but I want the steps because the time I tried to download from a link did not work
I just want to know the steps because I'm sure about things I didn't know
 

SULTAA321

New member
Oct 8, 2022
4
0
لا تتعب نفسك هنا التحديث ذا مايضبط لك

رح للموضوع ذا تقدر ترقي جهازك من ٨ الى ١٠

https://forum.xda-developers.com/t/...ctx-head-units-with-android-10-9-8-6.4314163/

وهنا شرح بالفيديو

Mod. Translation:
Don't bother yourself, here is the update that's right for you



Go to the topic if you can upgrade your device from 8 to 10



https://forum.xda-developers.com/t/...5-for-mtcx-hctx-head-units-with-android-10-9- 8-6.4314163/



Here is a video explanation
I couldn't find the update file, can I upgrade to 10
Android 8 PX5(1024x600)
MTCE_KSA2_V3.01_1
 

Badger50

Senior Moderator / Moderator Committee
Staff member
Thread lightly cleaned. Please remember XDA Rule 2.3 before posting:

2.3 Flaming / Lack of respect: XDA is about sharing and this does not involve virtual yelling (flaming) or rudeness. Flaming or posting with a lack of respect is unacceptable. Treat new members in the manner in which you would like to have been treated when you were a new member. When dealing with any member, provide them with guidance, advice and instructions when you can, showing them respect and courtesy. Never post in a demanding, argumentative, disrespectful or self-righteous manner.

Thank you for your cooperation, and a pleasant day to all.

-Regards: Badger50
 
  • Like
Reactions: Oswald Boelcke

oskrsfl

Member
Oct 11, 2017
17
3
Hi!!!, need help

I have an Android drive with px5 and the latest malaysk update.

Well the radio is mounted in a car that is used a few times a month so whenever I turn off the car I disconnect the battery.

Two or 3 days ago I connected the battery to take the vehicle and the radio started bootlooping and since then it never turns on. I remember seeing an Android doll with an open belly with something red.

What can I do?
 

MaddMaxx2021

New member
Nov 12, 2022
1
0
Hello
I instal this Rom on my device and everything is ok but the radio not working
what i have wrong make ?
 

esmeraldo18

Member
Jan 8, 2017
12
1
I'd like to replace htcbackview.apk with modified adjustable ruler version but it's forbitten to replace system files. how can I do that? are there any solutions for this? rom only have 3 predefined rulers.
 

Clou52

Member
Nov 5, 2022
9
0
I tried to install that firmware several time with several USB disks but always the same error "ERROR 21".
It seems to be desperate for my head unit.:confused::confused:

IMG_20221023_194828.jpg
 

Pavel-71

Senior Member
Jul 9, 2020
309
170
I tried to install that firmware several time with several USB disks but always the same error "ERROR 21".
It seems to be desperate for my head unit.:confused::confused:

View attachment 5778985
Hi, you obviously don't know what you're doing, so I'll shed some light on your problem. Here is the thread for devices with MCU MTCD, you have MCU: SF0.
Until the end of 2021 under the designation S32F0, then the designation SF0. PX5C is Android9, PX5D is Android10. Because the Malaysk ROM is S32F0, only for android 9, so you are out of luck because you have PX5D which is Android10. If everything works for you, then be happy and leave it as it is. If not, write to the seller or search in the thread on 4pda, there is more information and maybe you will find a solution to your problem. If I were you, I wouldn't go on any adventure, because you're on the best way to get a brick so far.

Malaysk ROM for PX5 MCU S32F0 RK3368 with Android 9:

Here you will find the most answers to your questions, read the first message carefully:
 
  • Like
Reactions: marchnz

Clou52

Member
Nov 5, 2022
9
0
(y) Great Pavel,
With 1 post you gave me all the answers to my doubts.
Thanks for your help (and to avoid me to brick my HU)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 19
    Only for devices processor Rockchip PX5, MCU - MTCD, MTCE Android 10.0 !

    Mod Q 10.0 Android PX5 RK3368
    For PX6 RK3399 mod 10 android is HERE
    Only for those who have 10 android installed, a PX5 processor and have an installed MCU that starts with MTC (X) - where X can have different letters.
    With firmware device, you need to understand all the risks. Neither I nor the website is not responsible for your actions and possibly killed devices! Everything you do - you do at your own peril and risk.

    Before installing the firmware, be sure to try to get into the Recovery (I have this method - I press the RESET button (RST) and hold the buttons on the front panel of the device until the buttons blink - I release the RESET button and immediately press the RESET button again for a short time 1-2 times ).
    IMPORTANT!!
    : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product (this is due to the fact that in 10 android these sections are dynamic and protected by the android itself from changes)- otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).

    How do you know if your device is suitable for this forum thread? You can see the device in Settings - System - About device: look at the photo

    What's added, fixed in LITE firmware version:
    Can't update Magisk module !! Only Magisk Manager can be updated!


    Root access (Magisk) 8.0.2
    IMPORTANT!! : You cannot change the firmware versions in the system partitions in LITE - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
    Added ESFileExplorer, RootExplorer programs.
    Two modified launchers with the ability to customize them (located in Mod Settings).
    Enabled the ability to start the screensaver and set the start time to 15-30 seconds 1-3-5-7-10 minutes.
    By default, video viewing while driving is enabled and audio mute in Navigation is set to -3.
    Changed basic Settings.
    Possibility to set viewing of Internet traffic speed in the Status Bar.
    Ability to change color and gradient in the Status Bar.
    Many other changes and additions.

    Installing LITE firmware version:

    Unzip the archive and write the Update.zip file to a SD card or USB flash drive (must be formatted in FAT32). Insert into the loaded device. After a few seconds, the update menu will appear. We put a checkmark on Wipe Data (you will lose all your installed programs) and click on the Install button. See the screenshot below. The machine will reboot and the firmware installation will begin.
    1111.png

    Download LITE version:
    Version updated as of March 28, 2022.


    Be sure to read the instructions inside the archive, along with the firmware !!!
    I want to warn you: Everything that you do, you do at your own peril and risk.
    Can't update Magisk module !! Only Magisk Manager can be updated!

    Download: https://disk.yandex.ru/d/LE0KPXUxW-dJkQ
    Mirror: https://mega.nz/file/QsJnkK4S#pFZ1GC2Pq6qfrsdX6qzVAF_d6ksLek3VKIt2m0RjOsI

    ----------------------------------------------
    What's added, fixed in FULL firmware version:
    Can't update Magisk module !! Only Magisk Manager can be updated!


    Full root access (Magisk)
    IMPORTANT!! : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
    Seven completely modified launchers with the ability to view tags for listening to music (any music app), Bluetooth music and radio stations.
    The ability to customize Launchers (enable, disable unnecessary functions in the settings) and weather settings in them and display the speed via GPS.
    4 types of screen savers with analog and digital clocks, with the ability to display GPS speed, weather, music listening tags (any music application),
    Bluetooth music and radio stations from the Radio app. Full customization of screensavers - color, font, disabling unnecessary functions, your car logo, etc. In the settings.
    Change splash screen - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM app.
    Changed the volume bar and reduced its disappearance time. It is also fully configurable in Settings Mod - Mod settings - Sound settings.
    Fully customizable panel status with the ability to enable and disable buttons and icons in it in the settings and it is possible to completely disable it.
    Reload key added to the status bar.
    Added buttons "Screensaver", "Music", "Navigation", "Bluetooth Music" in the status bar (can be enabled or disabled in the settings).
    Changed the function of calling the brightness panel in the status bar.
    The screensaver is now launched in all programs, in the Mod Settings there is an Application Whitelist, where you can specify applications where the screensaver will not start.
    Added a list of applications in the Mod settings, where you can specify autostart after sleep.
    Added equalizer ViperFX - you can watch the settings in the video
    Changed Bluetooth Music app.
    Applications Music, Radio, Video have been completely changed. You can install standard applications from the OEM application.
    Video files can be played in the background.
    Now when you switch on rear view camera the brightness is in creased up to maximum automatically
    4 different types of radio apps have been added in the OEM app (including radio with Day and Night support)
    Go to the OEM app and install the app from there.
    3 different types of Music app have been added in the OEM app.
    Split screen support (not all apps support)
    Added online radio PCRadio
    Mod settings - MOD Settings - System settings - added automatic screen brightness by GPS.
    Supports 1280X720 and 1024X600 screen resolutions.
    Added four customizable buttons to screensavers to launch your programs.
    - Long press on the button - select the application.
    - Short press on the button - start the application.
    You can now configure the MODE button to launch your applications.
    - Located in Mod Settings - MOD Settings - System Settings - Select applications to launch by pressing the MODE button.
    - If it is disabled, the standard method of operation of the MODE button is used (launching Radio-Music-Video)
    Added the ability to automatically adjust the sound based on GPS speed.
    Located in Settings mod - MOD Settings - Sound settings - Auto volume control by GPS.
    Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
    Located in Mod Settings - MOD Settings - System Settings - Popup Settings.
    Fixed GPS work.
    - Improved location accuracy.
    - With a cold start - satellites are located in 40-70 seconds.
    - With a hot start (after sleep or reboot) - instantly.
    Anyone who had problems with USB ports or missing WiFi - fixed.
    USB and WiFi are initialized after the system is fully booted and after sleep.
    New method and settings of the whitelist of programs to run after sleep (located in Mod Settings - Mod Settings - System Settings)
    New whitelist for programs in which the screensaver will not start (located in Mod Settings - Mod Settings - Screensaver Settings)
    Redesigned Launcher with day and night support. Also added to Mod Settings - Mod Settings - Launchers to configure it. You can customize the display of the main screen
    - Clock, GPS speed, Weather or choose to display your logo (download a logo on the Internet (for example, a BMW car logo),
    in PNG format and preferably with a transparent background and copy the file to the device's internal memory)
    If after updating the firmware, every time the system boots, the location permissions for the launcher are asked, go to Mod Settings - Mod Settings -
    Launcher Settings - Launcher with day and night support and enable GPS speed display.
    New graphic equalizer in Music and Screensaver apps, with four different graphic equalizers and color selection.
    You can now set the time for showing music and radio notifications in Mod Settings from 1 to 10 seconds.
    You can change the DPI of the screen. The range is from 260dpi to 160dpi (standard 220 by default) - I set it to 200dpi. Located - Mod Settings - Mod Settings - System Settings.
    You can assign the launch of your applications to the buttons on the steering wheel or on the front panel of the device. Located in Mod Settings - Mod Settings - Car (as you select applications there, then assign buttons through the standard application, for setting the buttons on the steering wheel, for example). - you can watch the video on how to configure -
    More flexible graphic equalizer settings are in Mod Settings - Mod Settings - Sound Settings.
    Mod Settings - Mod Settings - Car - added GPS fix (enabled by default).
    Redesigned regular widgets for managing Music, Radio, Bluetooth music, etc.
    Configurable rear camera parking lines, you need to go to Settings Mod – Car - related settings – Extra settings and enable 1-2-3 type of Rear view ruler.
    - In Mod Settings - MOD Settings - System Settings - Pop-up Notification Settings - added settings:
    1. Enable display of album covers (picture)
    2. Covers display size in px (pixels) - from 10 px to 100 px
    - Fixed autostart Nav Radio + after sleep (it won't start from the background)
    - Added French and Polish translation to Mod Settings (thanks to oxygen and XDA users)
    - In the Bluetooth application, the panel for incoming and outgoing calls has been changed.
    - Added display of covers from players (including standard player, online players, third-party players) in the screensaver. - only for PX5 and PX6, if the screensaver was installed from the OEM application before, then you need to reinstall it from there.
    Located in Mod Settings - Mod Settings - Screensaver Settings
    1. Enable display of covers (on by default)
    2. Set the transparency level of the picture
    - Added the ability to display radio station logos in the Radio application, pop-up notifications, in the screensaver.
    All Radio applications that have the ability to display logos are in the OEM application and have the word _logos at the end of the name, for example
    HCT4Radio_MOD_Malay_logos.apk
    HLARadio_MOD_Mal_logos.apk
    MTCRadio_MAL_NEW_logos.apk
    Question: What needs to be done to show the logos of radio stations?
    Answer :
    1. Download, for example, this archive of logos - https://disk.yandex.ru/d/8hmqpKHga0fQHQ or https://disk.yandex.ru/d/696euyOc9YLmiQ or download them from the Internet.
    2. The picture must be in .png format, preferably with a resolution of 250X250 px or 500X500 px (the higher the resolution, the better the picture will be shown in the screensaver)
    3. Find out the frequencies of radio stations in your city by entering into Google search "frequencies of radio stations (your city)"
    4. Rename pictures in .png format with the name of the radio station frequency. For example: there is a radio station Record, it broadcasts in your city at a frequency of 102.3 -
    rename the picture with the name 102.3.png.
    5. Create a Radio folder and copy all your pictures there.
    6. Copy the Radio folder to the root of the sdcard internal memory.
    - Ability to disable autorun of standard applications after loading or after sleep. Located in Settings MOD - Mod Settings - System Settings - Autostart applications after sleep / reboot - Disable the regular autostart mechanism for Radio, Music, BT.
    - Ability to change the theme Day - Night automatically by Auto screen brightness by GPS. Located in Settings MOD - Settings Mod - System Settings - Auto screen brightness by GPS - Change automatically the Day / Night theme (it is advisable to reboot later so that the changes apply)
    - Added DFX Light Processing 2 impulse to ViperFX, which radically changes the sound on the device. It needs to be activated in ViperFX.
    - Improved overall work speed.
    - Changes to GPS signal processing.
    - Completely rewritten from scratch Gps Parser, added support for A-GPS data from the chip side, positioning accuracy in open areas increased to 0-1 meters. (for PX5 - PX6)
    - In Mod Settings - Mod settings - Car - added a new setting to change the GPS grouping - Replacing GPS + GLONAS with GPS + BEIDOU
    - Added the function "Change commands for switching tracks using the right wheel (spinner)" - in Settings Mod - Mod settings - Car. If your right wheel does not switch music tracks in third-party players, you can try turning it on.
    EasyConnected has been updated to the latest version.
    Can't update Magisk module !! Only Magisk Manager can be updated!
    Many other fixes and additions.

    Installing FULL firmware version:

    You must download the LITE version, read the instructions inside the archive and be sure to install the LITE version on your device.

    VIDEO FULL version


    Online update 1.1.8.5 released on August 12, 2021
    Online update 1.2 released on 02 October, 2021

    Online update 1.2.2 from 03 December 2021
    Online update 1.2.8 from 27 July 2022
    Latest BETA firmware version 1.2.9.2 dated November 15, 2022
    Sample ViperFX settings -


    About Iphone and WiFi: https://forum.xda-developers.com/t/...-rk3368-with-android-10.4175209/post-86043841
    If you do not run applications where authorization is required : https://forum.xda-developers.com/t/...-rk3368-with-android-10.4175209/post-87005437
    Important information (announcement of future OTA updates) - https://forum.xda-developers.com/t/...-rk3368-with-android-10.4175209/post-84457253
    Who wants to translate Settings into their native language - https://forum.xda-developers.com/an...roid-6-8-9-t3955343/post80203246#post80203246

    ----------------------------------------------
    Many thanks to the respected Graser from the 4PDA forum for invaluable help in creating the firmware!
    +++++++++++++++++++++++++++++
    This post is in edit mode! Errors and inaccuracies are possible!
    Please excuse me in advance! I very rarely answer questions and do not use private messages!
    12
    I want to write to everyone just for information, so to speak, for information :)
    The update server always contains an updated version of the firmware, so to speak, a transitional one, where fixes - additions are gradually accumulated for the next online update.
    If, for example, someone needs to reset the settings to the factory settings, then I recommend installing the LITE version of the firmware again and updating again to the Full version.
    For example, updates are now accumulated, unlike version 1.1.6:
    UPD : 09/02/2021
    - Magisk updated to the latest version 21.4
    - Manager Magisk to the latest version 8.0.7
    - In Launcher Mal Dark, the buttons on the left and right panels have been slightly redone.
    immediately open the access point settings.
    open a third-party dialer
    open MTCDialer for voice calling
    - Fixed Screen Lock
    - Fixed crash of the screensaver if it could not receive weather data from the provider. (if you installed it from an OEM application, you need to update it again after updating the firmware)
    - zlink version 4.0.14
    UPD : 11/02/2021
    - Android base from 10/17/2020
    - Fixed Easy Connect and updated to the latest version 4.1.1
    - In Settings Mod - Settings MOD - System Settings - Pop-up Notification Settings - new settings have been added:
    1. Enable display of album covers (picture)
    2. Covers display size in px (pixels) - from 10 px to 100 px (see screenshots)
    - Fixed autostart Nav Radio + after sleep (it won't start from the background)
    - Added French and Polish translation to Mod Settings (thanks to oxygen and XDA users)
    - In the Bluetooth application the panel of incoming and outgoing calls has been changed.
    For example, updates are now accumulated, unlike version 1.1.7:
    UPD : 24/03/2021
    - Android base from 02/25/2021 - only for PX5
    - Android base from 12/17/2020 - only for PX6
    - Android base from 02.10.2020 - only for PX30
    - Latest version of Magisk
    - Fixed removing the bar status (after rebooting, it reappeared)
    - Added starting services after boot and sleep
    - Added a choice of delay (from 1 to 60 seconds) of the second, third, fourth application for autorun after loading.
    - Many other additions and fixes
    UPD : 26/03/2021
    - The ability to disable the standard mechanism of autorun Radio, Music, etc. standard applications (Mod Settings - MOD Settings - System Settings - Autostart applications after system boot)
    - Fixed initialization of Wi-Fi after boot.
    - Fixed launch of Radio (when launched with zero frequency and empty radio buttons)
    UPD : 30/03/2021
    - Added Italian translation to rear camera app
    - Added the ability to adjust the sound with your finger in the soundbar
    - Added the ability to display radio station logos in the Radio application, pop-up notifications, in the screensaver.
    All Radio applications that have the ability to display logos are located in the OEM application and have the word _logos at the end of the name, for example
    HCT4Radio_MOD_Malay_logos.apk
    HLARadio_MOD_Mal_logos.apk
    MTCRadio_MAL_NEW_logos.apk
    You need to reinstall the Radio applications from the OEM.
    Question: What needs to be done to show the logos of radio stations?
    Answer:
    1. Download for example this archive of logos - https://disk.yandex.ru/d/8hmqpKHga0fQHQ or download them yourself from the Internet.
    2. The picture must be in .png format, preferably with a resolution of 250X250 px or 500X500 px (the higher the resolution, the better the picture will be shown in the screensaver)
    3. Find out the frequencies of radio stations in your city by entering into Google search "frequencies of radio stations (your city)"
    4. Rename pictures in .png format with the name of the radio station frequency. For example: there is a radio station Record, it broadcasts in your city at a frequency of 102.3 -
    rename the picture with the name 102.3.png
    5. Create a Radio folder and copy all your pictures there.
    6. Copy the Radio folder to the root of the sdcard internal memory.
    It should then look something like the screenshots:
    Screenshot_20210329-165844.png
    Screenshot_20210329-153619.png
    Screenshot_20210329-124128.png
    Screenshot_20210329-124201.png


    UPD : 09/05/2021
    Added DFX Light Processing 2 impulse to ViperFX, which radically changes the sound on the device. It needs to be activated in ViperFX.
    Added partial support for a screen resolution of 1920x1080 (for new devices that have such a screen resolution, not all applications can be installed from OEM applications). I can’t check it myself, there is no such screen.
    Updated Magisk to the latest version.
    Ability to disable autorun of standard applications after loading or after sleep. Located in Settings MOD - Mod Settings - System Settings - Autostart applications after sleep / reboot - Disable the regular autostart mechanism for Radio, Music, BT.
    The ability to change the theme Day - Night automatically by Auto screen brightness by GPS. Located in Settings MOD - Settings Mod - System settings - Auto screen brightness by GPS - Change automatically the Day / Night theme (it is advisable to reboot later so that the changes apply)
    New screensaver in the OEM application. Name - MTCScreenClock_NEW_Factory.
    Fixed theme in MOD Settings.
    Updated launcher - Launcher 10 android to the latest version.
    Fixed bluetooth application HCT4BlueTooth_Mod for light theme (reinstall it from OEM application)
    Added Portuguese translation - thanks to Nuno
    Many other fixes and additions.
    UPD : 18/05/2021
    Fixed the equalizer, which is in the OEM application - HCT7AmpSetup_NEW (did not save the settings after reboot) - you need to reinstall it from the OEM application.
    Fixed light theme in Launcher 10 android. Added the ability to change the launch of applications in the bottom bar for buttons.
    - Long press on the button - select the launched application
    - Short press - launch the application


    Well, I wrote this to keep everyone in the know, all of this will of course be in the next update, when there will be a more voluminous accumulation of fixes and everyone will receive it automatically.
    This applies to ALL PX5-PX6-PX30 units

    I will try to add information about new fixes and additions in this post! (you can bookmark it :) )
    6
    Restoring the PX5 MTCE device on the 10 android.
    Also, using this method, go from 6-8-9 android to 10 android.
    I want to warn you: Everything that you do, you do at your own peril and risk.
    Create bootable SD card 10 Android PX5.
    Important!!! : very demanding on the type of SD card !! I started installing the firmware when I changed 5 different SD cards from different manufacturers !!!!!
    1. Unzip the bootable_sd_card_10_android_PX5 archive to C:/ disk on a laptop or computer.
    2. Run SD_Firmware_Tool.exe (as administrator)
    3. Select the firmware in .IMG - update_10_android_zavod_PX5.img
    4. Click on the Create button.
    5. After creating the SD card, insert it into the device and reboot it. The firmware installation will start automatically. Installation will take a very long time, about 40-60 minutes !!!!!
    Restoring a SD card after restoring the device:

    Download: https://mega.nz/file/chwAVI4A#_DHfhpxGEnswyhTk1K4tjps5ohS64N5Cjz0GQOLMVsU
    6
    Online update version 1.1.6 has been released.
    - Fixed work of online players (for example Spotify) after sleep.
    - New Settings Mod with support for day and night
    - Fixed DPI change
    - In the bluetooth application, the display of the contact list has been redesigned
    - Updated to the latest versions of ZLINK and EasyConnect
    - Fixed showing WiFi in the notification shade.
    - Many other fixes and additions.
    5
    Version 1.2.2 from 03 December 2021 is available on the update server for download
    1. Added the ability to fully customize the soundbar.
    The settings are located in Settings Mod - Mod Settings - Sound-related settings -Soundbar settings.
    You can select and customize a panel of four types:
    a) Standard panel
    b) AV style
    c) Circular panel
    d) Animated panel
    2.Fixed the work of Widgets, when after a reboot they did not work, if there was an auto-launch of Music or Radio, until they were closed and opened.
    3.Fixed equalizer that did not save settings after reboot from OEM application - EQ_DSP - EQ_DSP_NEW.
    For this you need:
    - Reinstall this equalizer from the OEM application - EQ_DSP - EQ_DSP_NEW
    - Enable setting from - Settings Mod - Mod settings - Sound-related settings - Initialization of the standard equalizer HCT7AMPSetup_NEW
    4.Added control of the brightness of the rear camera when the Auto screen brightness setting is enabled by GPS.
    The setting is in Settings MOD - Settings Mod - Auto screen brightness by GPS -Turn on maximum brightness when reversing.
    5. New setting in Settings MOD - Mod Settings - Sound related settings - Pause third-party players when making a call via Bluetooth
    6. New setting in MOD Settings - Mod Settings - Sound related settings - Automatic mixing of navigation apps
    7. Other fixes and additions.

    Soundbar video: