[ROM][PX5][S32F0][9.0] Malaysk ROM for PX5 MCU S32F0 RK3368 with Android 9

Malaysk

Senior Member
Jan 31, 2011
1,681
5,745
153
Only for devices processor Rockchip PX5, MCU - S32F0
Mod Pie 9.0 (10 fake android) Android PX5 S32F0 RK3368

Please excuse me. I'm bad at spelling in english. I use the translator Google. I rarely answer questions in private messages and on the forum. Sorry.
How to find out if your device is suitable for this forum thread? You can see of the device in Settings - About device :
There are 2 types of firmware for installation, with different installed MCU versions - the first type of firmware is more common with an installed MCU that starts with letters and numbers - S32F0_XinRC, S32F0_ZIQI, S32F0_LingYun, S32F0_Leima, S32F0_yunht and other compatible MCUs (you need to find out) and the second type of firmware for the installed MCU - S32F0_yuemao and others (you need to find out). To find out what version of the MCU you have installed, go to the Settings - About device application and look at the line with the MCU name.
LITE Firmware mod for the first type of installed MCU - S32F0_XinRC, S32F0_ZIQI, S32F0_LingYun, S32F0_Leima, S32F0_yunht and others


What's added:
Full ROOT access (SuperSU)
Added PlanetsPack live wallpapers
ESFileExplorer, RootExplorer programs.
New application for system settings - Settings Mod.
Two modified launchers with the ability to configure them in Mod Settings - Mod Settings - Launcher Settings.
Added in Mod Settings - Mod Settings - Statusbar Settings
a) Make the Status Bar semi-transparent
b) Clock settings in the StatusBar
c) Gradient StatusBar.
Added in Mod Settings - General Settings - Developer options
Many other changes and additions.
Installation:
1. Unzip the archive Update_lite_Malay_Mod_S32F0_XinRC.rar
2. Write the files ZQ_PX5C_UPDATE_lite_Malay_Mod_S32F0_XinRC.zip and Mod_Installer.apk to a USB flash drive (preferably formatted in FAT32)
3. Insert the USB flash drive into the loaded system in the device.
4. Install the Mod_Installer.apk application from a USB flash drive using any file manager.
5. Launch the Mod Installer application.
6. Click on the "INSTALL MOD RECOVERY" button and wait for the end of the process.
7. The device will automatically reboot into Recovery and the firmware installation will begin.
8. After the end, you will be asked to remove the USB flash drive - pull it out and you will be taken to Recovery.
9. With the help of short-term finger presses on the screen, we go down to the item "Wipe data / factory reset"
10. Hold your finger on this item for a long time until we get to another menu. There we press "YES". All data will be deleted and reset to factory settings.
11. Click on the item "Reboot system now"
12. The device will reboot. This completes the installation.
13. The first download will take a long time!
If the sound does not work for you, then you need to go to Settings and specify your sound type - with or without DSP.
Download: https://yadi.sk/d/SyGOr-yaUgJ9rg
Mirror: https://mega.nz/file/h4p2XZQA#r7o63qbnmRW7g3XFKPln1RzPZqn96lldGAYDY2yW5bw


LITE Firmware mod for the second type of installed MCU - S32F0_yuemao and others

What's added:
Full ROOT access (SuperSU)
Added PlanetsPack live wallpapers
ESFileExplorer, RootExplorer programs.
New application for system settings - Settings Mod.
Two modified launchers with the ability to configure them in Mod Settings - Mod Settings - Launcher Settings.
Added in Mod Settings - Mod Settings - Statusbar Settings
a) Make the Status Bar semi-transparent
b) Clock settings in the StatusBar
c) Gradient StatusBar.
Added in Mod Settings - General Settings - Developer options
Many other changes and additions.
Installation:
1. Unzip the archive Update_lite_Malay_Mod_S32F0_yuemao.rar
2. Write the files ZQ_PX5C_UPDATE_lite_Malay_Mod_S32F0_yuemao.zip and Mod_Installer.apk to a USB flash drive (preferably formatted in FAT32)
3. Insert the USB flash drive into the loaded system in the device.
4. Install the Mod_Installer.apk application from a USB flash drive using any file manager.
5. Launch the Mod Installer application.
6. Click on the "INSTALL MOD RECOVERY" button and wait for the end of the process.
7. The device will automatically reboot into Recovery and the firmware installation will begin.
8. After the end, you will be asked to remove the USB flash drive - pull it out and you will be taken to Recovery.
9. With the help of short-term finger presses on the screen, we go down to the item "Wipe data / factory reset"
10. Hold your finger on this item for a long time until we get to another menu. There we press "YES". All data will be deleted and reset to factory settings.
11. Click on the item "Reboot system now"
12. The device will reboot. This completes the installation.
13. The first download will take a long time!
If the sound does not work for you, then you need to go to Settings and specify your sound type - with or without DSP.
Download: https://yadi.sk/d/uFZF95q2uToeWQ
Mirror: https://mega.nz/file/hgpXSI5J#ZWakDRgjIPkuc6MmaQ8hky1NILHn0CY94Ox0rTsVOfk



DSP Programs - https://forum.xda-developers.com/t/...0-rk3368-with-android-9.4194651/post-84182975

FULL Firmware Version Information:

Video :
What's added to the full version:
Root access (SuperSU)
Six completely modified launchers with the ability to view tags for music listening (any music app), bluetooth music and radio stations (not in all launchers).
The ability to customize Launchers (enable, disable unnecessary functions in the settings) and weather settings in them and display the speed via GPS.
4 types of screen savers with analog and digital clocks, with the ability to display GPS speed, weather, music listening tags (any music application),
Bluetooth music and radio stations from the Radio app. Full customization of screensavers - color, font, disable unnecessary functions, your car logo, etc. In the settings.
Change splash screen - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM app.
Changed the volume bar and reduced its disappearance time. It is also fully configurable in Settings Mod - Mod settings - Sound settings.
Fully customizable panel status with the ability to enable and disable buttons and icons in it in the settings and it is possible to completely disable it.
Reload key added to the status bar.
Added buttons "Screensaver", "Music", "Navigation", "Bluetooth Music" in the status bar (can be enabled or disabled in the settings).
The screensaver runs in all programs, there is an Application Whitelist in Mod Settings where you can specify applications where the screensaver will not start.
Added a list of applications in the Settings Mod, where you can specify autostart after sleep.
Added equalizer ViperFX (if you have a device with DSP, then it does not work)
Changed Bluetooth Music app.
Music and Radio applications have been completely changed. You can install standard applications from the OEM application.
You can execute your scripts in the System /etc/Init.d folder
Added online radio PCRadio
Settings Mod - MOD Settings - System settings - added automatic screen brightness by GPS.
Added four customizable buttons to screensavers to launch your programs.
- Long press on the button - select the application.
- Short press on the button - start the application.
Added the ability to automatically adjust sound based on GPS speed.
Located in Settings Mod - MOD Settings - Sound settings - Auto volume control by GPS.
Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
Located in Settings Mod - MOD Settings - System Settings - Popup Settings.
Fixed GPS work.
- Improved location accuracy.
- With a cold start - satellites are located in 40-70 seconds.
- With a hot start (after sleep or reboot) - instantly.
Anyone who had problems with USB ports or missing WiFi - fixed.
USB and WiFi initialization occurs after full system boot and after sleep.
New method and settings of the whitelist of programs to run after sleep (located in Settings Mod - Mod Settings - System Settings)
New whitelist for programs in which the screensaver will not start (located in Settings Mod - Mod Settings - Screensaver Settings)
You can now set the time for showing music and radio notifications in Settings Mod from 1 to 10 seconds.
You can change the DPI of the screen. Range from 260dpi to 160dpi (default standard 220). Located - Settings Mod - Mod Settings - System Settings.
More flexible graphic equalizer settings are in Settings Mod - Mod Settings - Sound Settings.
Settings Mod - Mod Settings - Car - added GPS fix (enabled by default).
Redesigned regular widgets for managing Music, Radio, Bluetooth music, etc.
Added 5 attempts to initialize WiFi every 20 seconds with checking network availability
Added forced inclusion of disabled WiFi SSIDs, the GU for some reason periodically sets the Disable status of the working SSID and does not automatically connect.
Added display of RDS Radio in the screensaver and in some launchers.
There are a lot of other additions and fixes.
Installation:

We must download the LITE version, read the instructions in the archive along with the firmware, install the LITE version and check its work on your device, if everything suits you and you want more functions and changes in the firmware, then we do everything that is written in the instructions for the LITE version ...

A mini update to version 1.1.1 has been released (2 mb) from 5 February 2021

Fixed the work of online applications such as Spotify.
In Settings Mod - Settings related to sound - added a settings item - List of applications that have problems with sound (you need to add your players there, in which the sound does not work correctly, disappears when rewinding, the next track or after sleep)

The work on the full version of the firmware mod is completed, the first release of version 1.0 is made. Please read the information under the spoiler "FULL Firmware Version Information:"
I ask you to excuse me in advance if I don’t often answer in the topic, since I’m physically not enough for all the time and I ask you to understand me! And we will help other users if you know the answers to questions!
 

Attachments

Last edited:

Jarninho

Member
Jul 29, 2020
5
4
3
Awesome. I have one of these units and very eager to test. However, I have some questions I hope a user can anser:

1. I have no original software for backup. Is it available somewhere in case this doesn't work?
MCU: S32F0_XinRC-18-W_20200812-09:08_HD1_7708_D_FF_C8
APP: PX5C_C54_HA1_Xrc2-10-EN_2020-06-05-1726

2. If I take the power off of it, will it remember equalizer sound settings?
3. I always get a popup that my usb device want access. I can check a box to remember the setting, but after each boot it asks again... Is this solved?
4. Steering wheel controls programmable?

Thanks.
 

ceo16

Member
Nov 9, 2020
20
2
3
Installed... thank you for the great work you have done. I have a problem with my canbus (ft-ss-05) now not available in the settings and those available lack the functions. Why are there no canbus models compared to the original Rom?
 

royalhawk2002

Senior Member
Sep 21, 2008
838
117
63
Avezzano
Awesome. I have one of these units and very eager to test. However, I have some questions I hope a user can anser:

1. I have no original software for backup. Is it available somewhere in case this doesn't work?
MCU: S32F0_XinRC-18-W_20200812-09:08_HD1_7708_D_FF_C8
APP: PX5C_C54_HA1_Xrc2-10-EN_2020-06-05-1726

2. If I take the power off of it, will it remember equalizer sound settings?
3. I always get a popup that my usb device want access. I can check a box to remember the setting, but after each boot it asks again... Is this solved?
4. Steering wheel controls programmable?

Thanks.
I try to answer to your questions.
1) You need a "backup" only of the Android Part. The MCU is untouched by this ROM. You need the reinstall the original SW. I don't know if this is straight away, after the Custom ROM installation. In any case, Here you will find several original firmware, search for the one for you unit:
https://yadi.sk/d/lBxQipoetfkMLw
You can find also a thread here: https://4pda.ru/forum/index.php?showtopic=973677&st=0

2) If you remove the fixed +B, typically all the settings should be lost. I am not sure about the equalizer.
3) This happened also to me before I had installed the Malaysk ROM. It is a bug of the original FW. With the Malaysk ROM this issue is gone.
4) Only resistive for the moment, as the original FW one.
 
Last edited:

Paolo7297

Member
Sep 26, 2018
15
2
3
Installed, works amazing, I have only a big issue: using spotify, when i play next manually with swc (resistive) the song changes, but i have no audio, i need to press pause then play to get audio again... If the songs changes automatically after reaching the end no issue...
 

Jarninho

Member
Jul 29, 2020
5
4
3
I try to answer to your questions.
1) You need a "backup" only of the Android Part. The MCU is untouched by this ROM. You need the reinstall the original SW. I don't know if this is straight away, after the Custom ROM installation. In any case, Here you will find several original firmware, search for the one for you unit:
Thanks for all your help (and getting this organised).

Unfortunately I don’t see any xinrc roms there. But I’m too curious not to try. The confirmation checkbox for usb has been bugging me a lot.
I’ll try soon and report. Fingers crossed!
 

Malaysk

Senior Member
Jan 31, 2011
1,681
5,745
153
Great work! My unit has a 800x480 display, will the custom ROM work just as well?
I don't think that the display will be correct, it works well at a resolution of 1024X600
Does this rom works with the same radio PX5 MCU S32F0 RK3368 with Android 10?
You have installed, I think a fake 10 android, in fact it's 9 android.
No one tested the ROM with YUNHT MCU?

What happen if i flash it? don't want to brick the unit
Very many different MCUs from different manufacturers! We need to check.
 
Last edited:
  • Like
Reactions: 67comet

uvs1313de

Member
Jan 5, 2011
17
6
23
did some testing today. Fcc launcher works. I miss the nice volume bar of the old roms. Where can I setup the delay for sleep mode? .Radio will not turn off.
 

royalhawk2002

Senior Member
Sep 21, 2008
838
117
63
Avezzano
did some testing today. Fcc launcher works. I miss the nice volume bar of the old roms. Where can I setup the delay for sleep mode? .Radio will not turn off.
These radio works differently from MCU MTCD based one with regards to the sleep philosophy. The are going in stand by and they will completely switch off only when the car battery goes under 12 volt. This is done to have a fast boot

Inviato dal mio SM-N970F utilizzando Tapatalk
 

tino199

Member
Oct 3, 2020
5
0
1
really a great job installed without problems everything much smoother and faster I was wondering if it was possible an automatic dark mode on the whole system as it happens on smartphones for all apps to solve the problem of reflections in the car the apps would be more visible thanks a lot of compliments