[ROM][PX5][S32F0][9.0] Malaysk ROM for PX5 MCU S32F0 RK3368 with Android 9

Search This thread

mericon

Senior Member
Aug 18, 2011
347
359
Aachen
Are there will be more Updates?
My Spotify Problems are Back 😔

I testet to remove Spotify from the Problem list reboot and Put it Back and reboot but nothing Changes.
 

R-v-E

Member
Jul 12, 2020
12
0
It seems that you have the "black" DSP Type. To check it do the following:
- Uninstall all DSP app you have
- Install the Black DSP module app from here : https://forum.xda-developers.com/t/...8-with-android-9.4194651/page-7#post-84182975
- Set in App Settings the "ROHM DSP"
- Set in DSP Settings the " DSP-BU32107"
If also this is not working, then probably your HU is without DSP

If I want to change te settings in the App I need to enter a Password.

IMG_5503.jpg
 

R-v-E

Member
Jul 12, 2020
12
0
202818 ... but you will not find anything interesting there.
Hmm..

It seems that you have the "black" DSP Type. To check it do the following:
- Uninstall all DSP app you have
- Install the Black DSP module app from here : https://forum.xda-developers.com/t/...8-with-android-9.4194651/page-7#post-84182975
- Set in App Settings the "ROHM DSP"
- Set in DSP Settings the " DSP-BU32107"
If also this is not working, then probably your HU is without DSP
According to this post I need to set "ROHM DSP" in the app settings.

My HU has a separate Subwoofer output. But I can't find any settings. The Output is the same as the Front L&R output.
So if I want to use a Highpass on my front speakers, the Subwoofer doesn't do much because of the Highpass filter.

I can set a highpass on my amp but is is limited to 80hz or 150hz. And I want a highpass / crossover at around 100hz/120hz.

My hope was that it was a limit in the standard DSP app.
 

royalhawk2002

Senior Member
Sep 21, 2008
874
129
Avezzano
Hmm..


According to this post I need to set "ROHM DSP" in the app settings.

My HU has a separate Subwoofer output. But I can't find any settings. The Output is the same as the Front L&R output.
So if I want to use a Highpass on my front speakers, the Subwoofer doesn't do much because of the Highpass filter.

I can set a highpass on my amp but is is limited to 80hz or 150hz. And I want a highpass / crossover at around 100hz/120hz.

My hope was that it was a limit in the standard DSP app.
If I am not wrong, should be some settings to enable the subwoofer in the factory settings.... but I repeat, I am not sure.
 

R-v-E

Member
Jul 12, 2020
12
0
If I am not wrong, should be some settings to enable the subwoofer in the factory settings.... but I repeat, I am not sure.
That is for the BU37033 DSP Chip (Green DSP I believe).
My HU has a BU-32107 DSP Chip (Black DSP)

Bit off topic.

This unit is a bit a pain in the ***.

Crappy stock firmware.

With the Malaysk ROM the unit is much faster so big thanks!!!! Will buy the full version soon.
but still a few big frustrating things:

DAB+: The original app works perfect. No USB permission popups every time. But... Does not work with the SWC.
DAB-Z: works perfect. Slightly faster and works with the SWC.... But those USB permission popups..........

DSP: No seperate subwoofer settings. My install relies on a decent DSP with crossovers for each channel etc etc.

And some minor frustrations. But if somehow the fist issues are fixed, I can live with the other small issues.

And last but not least: (that has nothing to do with Malaysk rom so way offtopic)
My previous HU (Simple Kenwood single Din radio) had FM failover for the DAB+. So if the DAB+ signal was low, the radio seamless switched to FM (if the radio station has a FM and DAB freq).
The radio had a latency compensation or something like that.
You only hear a slight difference in audio quality.
 

royalhawk2002

Senior Member
Sep 21, 2008
874
129
Avezzano
That is for the BU37033 DSP Chip (Green DSP I believe).
My HU has a BU-32107 DSP Chip (Black DSP)

Bit off topic.

This unit is a bit a pain in the ***.

Crappy stock firmware.

With the Malaysk ROM the unit is much faster so big thanks!!!! Will buy the full version soon.
but still a few big frustrating things:

DAB+: The original app works perfect. No USB permission popups every time. But... Does not work with the SWC.
DAB-Z: works perfect. Slightly faster and works with the SWC.... But those USB permission popups..........

DSP: No seperate subwoofer settings. My install relies on a decent DSP with crossovers for each channel etc etc.

And some minor frustrations. But if somehow the fist issues are fixed, I can live with the other small issues.

And last but not least: (that has nothing to do with Malaysk rom so way offtopic)
My previous HU (Simple Kenwood single Din radio) had FM failover for the DAB+. So if the DAB+ signal was low, the radio seamless switched to FM (if the radio station has a FM and DAB freq).
The radio had a latency compensation or something like that.
You only hear a slight difference in audio quality.
DAB Z USB permission fixed in the Full Malaysk ROM.
Regarding the auto switch between FM and DAB, we are asking since long time... but it seems not in the "to do list" for now.
I heard that the DAB Z author will implement something similar in the future, but not with FM . He will switch to internet radio
 

R-v-E

Member
Jul 12, 2020
12
0
Last question...

The DSP App doesn't work but I already removed the original DSP / Audio settings app.
Does someone know where to download the original DSP App???
 

royalhawk2002

Senior Member
Sep 21, 2008
874
129
Avezzano
To everyone that has problem buying Malaysk full ROM, this is the message received from him:

Unfortunately, PayPal now has new rules and they are checking my account (they needed to provide additional documents).
They wrote - that verification will take about 10 days. I think everything will be fine soon.
 

uvs1313de

Member
Jan 5, 2011
22
7
does anyone has a MCU Leima WITH DSP. I only found without DSP.
By mistake i installed the wrong one and now i can't adjust the volume anymore.
In the DSP App the Rom Version is shown as unknown and I can't even update with the rom-file
 
Last edited:

songonic

Member
May 2, 2011
5
2
@Malaysk

I updatete my mcu from S32F0_Leima to SF0-PX5

and android C54 to C55



is this MCU still Supportet?
 

Attachments

  • 26271FAE-723C-4906-A1E3-6B5CEFE080EB.jpeg
    26271FAE-723C-4906-A1E3-6B5CEFE080EB.jpeg
    4.7 MB · Views: 58
  • 38152B92-6ADC-4F9E-BC60-094EC60471A7.jpeg
    38152B92-6ADC-4F9E-BC60-094EC60471A7.jpeg
    251.9 KB · Views: 56

royalhawk2002

Senior Member
Sep 21, 2008
874
129
Avezzano
@Malaysk

I updatete my mcu from S32F0_Leima to SF0-PX5

and android C54 to C55



is this MCU still Supportet?
I think that the MCU is still the S32F0, otherwise it cannot be updated and the head unit will brick. From where you downloaded the file ? Which differences you found w.r.t. the previous version of the MCU ? Could you please check the API level of the Android C55 ? Perhaps this is a true Android 10
 

Malaysk

Senior Member
Jan 31, 2011
1,686
5,779
To everyone that has problem buying Malaysk full ROM, this is the message received from him:

Unfortunately, PayPal now has new rules and they are checking my account (they needed to provide additional documents).
They wrote - that verification will take about 10 days. I think everything will be fine soon.
Everything is fine from today. PayPal works.
 

Top Liked Posts

  • 2
    PS: Immediately I apologize if I touch anyone in my own words, this is not out of malice, it has been accumulating since August 2020, when work began on the mod firmware.
    I receive a total of 30 to 120 letters per day, of which 98 percent are completely unrelated to the mod firmware and the changes added to it compared to the factory one. Almost everyone who has installed the full version (there are of course many exceptions) believes that if he has installed the firmware, he has every right to life-long support FOR ANY QUESTIONS - I repeat, for any questions not at all related to the fact that a new one has been added or fixed in comparison with factory Chinese firmware.
    This is mistake. You have installed the updated version, which we have been developing for a very long time and keep it in good shape. To be honest, I'm tired of answering all this, I'm not tech support. I (and also Graser) are just finalizing the factory firmware. Every day, without days off and holidays, I lose about 2 hours just answering letters.
    From now on everything will be different - install the LITE version of the firmware - test it completely, if it FULLY suits you - go to the FULL version. If you have any questions ONLY on the points that we have added - changed compared to the factory firmware - we will be happy to answer, we will solve problems.
    Thank you for your attention, I hope no one was offended.
  • 9
    OTA (Internet) update to version 1.1.5 (FULL version)

    (NEW) Android base from 08 March 2021
    (NEW) Hardware buttons control alternative players without starting the radio
    (NEW) New launcher with Day and Night support - Launcher 10 android with support for managing standard Radio, Music, Bluetooth applications
    (NEW) Support Day and Night in Mod Settings, Settings, Factory Settings, Basic Settings.
    (NEW) Added an application for voice calling contacts from the bluetooth application - MTCDialer (Voice Dialer) - launch Voice Dialer and for example say "<Contact Name>" from the bluetooth application.
    (NEW) Support for voice call of contacts from Google Assistant (your contacts from your Google account must be synchronized) - for example, say "Call <Contact Name>"
    (NEW) Added alternative True Contact dialer to sync and call your contacts from google account.
    (NEW) Added new screensaver with clock and date only. Located in the OEM application - ScreenClock__black
    (NEW) In Settings MOD - Settings Mod - System Settings - Autostart applications after sleep / reboot - Disable the regular autostart mechanism for Radio, Music, BT after sleep and boot.
    (NEW) In settings MOD - Settings Mod - System settings - Auto screen brightness by GPS - Enable control of the system theme depending on the time of day. (must be enabled auto brightness screen by GPS)
    (NEW) In settings MOD - Settings Mod - System settings - Auto screen brightness by GPS - Day and night mode - you can specify it yourself Automatically, Always night, always day (must be disabled - Enable system theme control depending on the time of day)
    Very, very many other fixes and additions (the firmware has been redone by 80 percent)

    Video:
    4
    To everyone that has problem buying Malaysk full ROM, this is the message received from him:

    Unfortunately, PayPal now has new rules and they are checking my account (they needed to provide additional documents).
    They wrote - that verification will take about 10 days. I think everything will be fine soon.
    Everything is fine from today. PayPal works.
    2
    Everything is fine from today. PayPal works.
    Hi Malaysk can you build a rom for our HU that have 800x480p display ?! We really need a rom as your. Thank you.
    2
    PS: Immediately I apologize if I touch anyone in my own words, this is not out of malice, it has been accumulating since August 2020, when work began on the mod firmware.
    I receive a total of 30 to 120 letters per day, of which 98 percent are completely unrelated to the mod firmware and the changes added to it compared to the factory one. Almost everyone who has installed the full version (there are of course many exceptions) believes that if he has installed the firmware, he has every right to life-long support FOR ANY QUESTIONS - I repeat, for any questions not at all related to the fact that a new one has been added or fixed in comparison with factory Chinese firmware.
    This is mistake. You have installed the updated version, which we have been developing for a very long time and keep it in good shape. To be honest, I'm tired of answering all this, I'm not tech support. I (and also Graser) are just finalizing the factory firmware. Every day, without days off and holidays, I lose about 2 hours just answering letters.
    From now on everything will be different - install the LITE version of the firmware - test it completely, if it FULLY suits you - go to the FULL version. If you have any questions ONLY on the points that we have added - changed compared to the factory firmware - we will be happy to answer, we will solve problems.
    Thank you for your attention, I hope no one was offended.
    1
    API Level 28
    Android 9.0
  • 13
    Only for devices processor Rockchip PX5, MCU - S32F0
    Mod Pie 9.0 (10 fake android) Android PX5 S32F0 RK3368

    Please excuse me. I'm bad at spelling in english. I use the translator Google. I rarely answer questions in private messages and on the forum. Sorry.
    How to find out if your device is suitable for this forum thread? You can see of the device in Settings - About device :
    There are 2 types of firmware for installation, with different installed MCU versions - the first type of firmware is more common with an installed MCU that starts with letters and numbers - S32F0_XinRC, S32F0_ZIQI, S32F0_LingYun, S32F0_Leima, S32F0_yunht and other compatible MCUs (you need to find out) and the second type of firmware for the installed MCU - S32F0_yuemao and others (you need to find out). To find out what version of the MCU you have installed, go to the Settings - About device application and look at the line with the MCU name.
    LITE Firmware mod for the first type of installed MCU - S32F0_XinRC, S32F0_ZIQI, S32F0_LingYun, S32F0_Leima, S32F0_yunht and others


    What's added:
    Full ROOT access (SuperSU)
    Added PlanetsPack live wallpapers
    ESFileExplorer, RootExplorer programs.
    New application for system settings - Settings Mod.
    Two modified launchers with the ability to configure them in Mod Settings - Mod Settings - Launcher Settings.
    Added in Mod Settings - Mod Settings - Statusbar Settings
    a) Make the Status Bar semi-transparent
    b) Clock settings in the StatusBar
    c) Gradient StatusBar.
    Added in Mod Settings - General Settings - Developer options
    Many other changes and additions.
    Installation:
    1. Unzip the archive Update_lite_Malay_Mod_S32F0_XinRC.rar
    2. Write the files ZQ_PX5C_UPDATE_lite_Malay_Mod_S32F0_XinRC.zip and Mod_Installer.apk to a USB flash drive (preferably formatted in FAT32)
    3. Insert the USB flash drive into the loaded system in the device.
    4. Install the Mod_Installer.apk application from a USB flash drive using any file manager.
    5. Launch the Mod Installer application.
    6. Click on the "INSTALL MOD RECOVERY" button and wait for the end of the process.
    7. The device will automatically reboot into Recovery and the firmware installation will begin.
    8. After the end, you will be asked to remove the USB flash drive - pull it out and you will be taken to Recovery.
    9. With the help of short-term finger presses on the screen, we go down to the item "Wipe data / factory reset"
    10. Hold your finger on this item for a long time until we get to another menu. There we press "YES". All data will be deleted and reset to factory settings.
    11. Click on the item "Reboot system now"
    12. The device will reboot. This completes the installation.
    13. The first download will take a long time!
    If the sound does not work for you, then you need to go to Settings and specify your sound type - with or without DSP.
    Download: https://yadi.sk/d/SyGOr-yaUgJ9rg
    Mirror: https://mega.nz/file/h4p2XZQA#r7o63qbnmRW7g3XFKPln1RzPZqn96lldGAYDY2yW5bw


    LITE Firmware mod for the second type of installed MCU - S32F0_yuemao and others

    What's added:
    Full ROOT access (SuperSU)
    Added PlanetsPack live wallpapers
    ESFileExplorer, RootExplorer programs.
    New application for system settings - Settings Mod.
    Two modified launchers with the ability to configure them in Mod Settings - Mod Settings - Launcher Settings.
    Added in Mod Settings - Mod Settings - Statusbar Settings
    a) Make the Status Bar semi-transparent
    b) Clock settings in the StatusBar
    c) Gradient StatusBar.
    Added in Mod Settings - General Settings - Developer options
    Many other changes and additions.
    Installation:
    1. Unzip the archive Update_lite_Malay_Mod_S32F0_yuemao.rar
    2. Write the files ZQ_PX5C_UPDATE_lite_Malay_Mod_S32F0_yuemao.zip and Mod_Installer.apk to a USB flash drive (preferably formatted in FAT32)
    3. Insert the USB flash drive into the loaded system in the device.
    4. Install the Mod_Installer.apk application from a USB flash drive using any file manager.
    5. Launch the Mod Installer application.
    6. Click on the "INSTALL MOD RECOVERY" button and wait for the end of the process.
    7. The device will automatically reboot into Recovery and the firmware installation will begin.
    8. After the end, you will be asked to remove the USB flash drive - pull it out and you will be taken to Recovery.
    9. With the help of short-term finger presses on the screen, we go down to the item "Wipe data / factory reset"
    10. Hold your finger on this item for a long time until we get to another menu. There we press "YES". All data will be deleted and reset to factory settings.
    11. Click on the item "Reboot system now"
    12. The device will reboot. This completes the installation.
    13. The first download will take a long time!
    If the sound does not work for you, then you need to go to Settings and specify your sound type - with or without DSP.
    Download: https://yadi.sk/d/uFZF95q2uToeWQ
    Mirror: https://mega.nz/file/hgpXSI5J#ZWakDRgjIPkuc6MmaQ8hky1NILHn0CY94Ox0rTsVOfk



    DSP Programs - https://forum.xda-developers.com/t/...0-rk3368-with-android-9.4194651/post-84182975

    FULL Firmware Version Information:

    Video :
    What's added to the full version:
    Root access (SuperSU)
    Six completely modified launchers with the ability to view tags for music listening (any music app), bluetooth music and radio stations (not in all launchers).
    The ability to customize Launchers (enable, disable unnecessary functions in the settings) and weather settings in them and display the speed via GPS.
    4 types of screen savers with analog and digital clocks, with the ability to display GPS speed, weather, music listening tags (any music application),
    Bluetooth music and radio stations from the Radio app. Full customization of screensavers - color, font, disable unnecessary functions, your car logo, etc. In the settings.
    Change splash screen - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM app.
    Changed the volume bar and reduced its disappearance time. It is also fully configurable in Settings Mod - Mod settings - Sound settings.
    Fully customizable panel status with the ability to enable and disable buttons and icons in it in the settings and it is possible to completely disable it.
    Reload key added to the status bar.
    Added buttons "Screensaver", "Music", "Navigation", "Bluetooth Music" in the status bar (can be enabled or disabled in the settings).
    The screensaver runs in all programs, there is an Application Whitelist in Mod Settings where you can specify applications where the screensaver will not start.
    Added a list of applications in the Settings Mod, where you can specify autostart after sleep.
    Added equalizer ViperFX (if you have a device with DSP, then it does not work)
    Changed Bluetooth Music app.
    Music and Radio applications have been completely changed. You can install standard applications from the OEM application.
    You can execute your scripts in the System /etc/Init.d folder
    Added online radio PCRadio
    Settings Mod - MOD Settings - System settings - added automatic screen brightness by GPS.
    Added four customizable buttons to screensavers to launch your programs.
    - Long press on the button - select the application.
    - Short press on the button - start the application.
    Added the ability to automatically adjust sound based on GPS speed.
    Located in Settings Mod - MOD Settings - Sound settings - Auto volume control by GPS.
    Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
    Located in Settings Mod - MOD Settings - System Settings - Popup Settings.
    Fixed GPS work.
    - Improved location accuracy.
    - With a cold start - satellites are located in 40-70 seconds.
    - With a hot start (after sleep or reboot) - instantly.
    Anyone who had problems with USB ports or missing WiFi - fixed.
    USB and WiFi initialization occurs after full system boot and after sleep.
    New method and settings of the whitelist of programs to run after sleep (located in Settings Mod - Mod Settings - System Settings)
    New whitelist for programs in which the screensaver will not start (located in Settings Mod - Mod Settings - Screensaver Settings)
    You can now set the time for showing music and radio notifications in Settings Mod from 1 to 10 seconds.
    You can change the DPI of the screen. Range from 260dpi to 160dpi (default standard 220). Located - Settings Mod - Mod Settings - System Settings.
    More flexible graphic equalizer settings are in Settings Mod - Mod Settings - Sound Settings.
    Settings Mod - Mod Settings - Car - added GPS fix (enabled by default).
    Redesigned regular widgets for managing Music, Radio, Bluetooth music, etc.
    Added 5 attempts to initialize WiFi every 20 seconds with checking network availability
    Added forced inclusion of disabled WiFi SSIDs, the GU for some reason periodically sets the Disable status of the working SSID and does not automatically connect.
    Added display of RDS Radio in the screensaver and in some launchers.
    There are a lot of other additions and fixes.
    Installation:

    We must download the LITE version, read the instructions in the archive along with the firmware, install the LITE version and check its work on your device, if everything suits you and you want more functions and changes in the firmware, then we do everything that is written in the instructions for the LITE version ...

    A mini update to version 1.1.1 has been released (2 mb) from 5 February 2021

    Fixed the work of online applications such as Spotify.
    In Settings Mod - Settings related to sound - added a settings item - List of applications that have problems with sound (you need to add your players there, in which the sound does not work correctly, disappears when rewinding, the next track or after sleep)

    OTA (Internet) update to version 1.1.5 (FULL version) of May 15, 2021


    (NEW) Android base from 08 March 2021
    (NEW) Hardware buttons control alternative players without starting the radio
    (NEW) New launcher with Day and Night support - Launcher 10 android with support for managing standard Radio, Music, Bluetooth applications
    (NEW) Support Day and Night in Mod Settings, Settings, Factory Settings, Basic Settings.
    (NEW) Added an application for voice calling contacts from the bluetooth application - MTCDialer (Voice Dialer) - launch Voice Dialer and for example say "<Contact Name>" from the bluetooth application.
    (NEW) Support for voice call of contacts from Google Assistant (your contacts from your Google account must be synchronized) - for example, say "Call <Contact Name>"
    (NEW) Added alternative True Contact dialer to sync and call your contacts from google account.
    (NEW) Added new screensaver with clock and date only. Located in the OEM application - ScreenClock__black
    (NEW) In Settings MOD - Settings Mod - System Settings - Autostart applications after sleep / reboot - Disable the regular autostart mechanism for Radio, Music, BT after sleep and boot.
    (NEW) In settings MOD - Settings Mod - System settings - Auto screen brightness by GPS - Enable control of the system theme depending on the time of day. (must be enabled auto brightness screen by GPS)
    (NEW) In settings MOD - Settings Mod - System settings - Auto screen brightness by GPS - Day and night mode - you can specify it yourself Automatically, Always night, always day (must be disabled - Enable system theme control depending on the time of day)
    Very, very many other fixes and additions (the firmware has been redone by 80 percent)

    Video:

    The work on the full version of the firmware mod is completed, the first release of version 1.0 is made. Please read the information under the spoiler "FULL Firmware Version Information:"
    I ask you to excuse me in advance if I don’t often answer in the topic, since I’m physically not enough for all the time and I ask you to understand me! And we will help other users if you know the answers to questions!
    9
    OTA (Internet) update to version 1.1.5 (FULL version)

    (NEW) Android base from 08 March 2021
    (NEW) Hardware buttons control alternative players without starting the radio
    (NEW) New launcher with Day and Night support - Launcher 10 android with support for managing standard Radio, Music, Bluetooth applications
    (NEW) Support Day and Night in Mod Settings, Settings, Factory Settings, Basic Settings.
    (NEW) Added an application for voice calling contacts from the bluetooth application - MTCDialer (Voice Dialer) - launch Voice Dialer and for example say "<Contact Name>" from the bluetooth application.
    (NEW) Support for voice call of contacts from Google Assistant (your contacts from your Google account must be synchronized) - for example, say "Call <Contact Name>"
    (NEW) Added alternative True Contact dialer to sync and call your contacts from google account.
    (NEW) Added new screensaver with clock and date only. Located in the OEM application - ScreenClock__black
    (NEW) In Settings MOD - Settings Mod - System Settings - Autostart applications after sleep / reboot - Disable the regular autostart mechanism for Radio, Music, BT after sleep and boot.
    (NEW) In settings MOD - Settings Mod - System settings - Auto screen brightness by GPS - Enable control of the system theme depending on the time of day. (must be enabled auto brightness screen by GPS)
    (NEW) In settings MOD - Settings Mod - System settings - Auto screen brightness by GPS - Day and night mode - you can specify it yourself Automatically, Always night, always day (must be disabled - Enable system theme control depending on the time of day)
    Very, very many other fixes and additions (the firmware has been redone by 80 percent)

    Video:
    5
    for whom are interested to an alternative Radio App, here there is the Navradio+ ported by Kotix to our devices:
    4
    Hi Everyone,

    I finally installed the ROM, all good, except that when i've wiped all data, i've lost the GPS app and the DSP app. I don't care about the GPS app but it would be nice to get the DSP app back, i saw that there is an installer for a DSP app into the original firmware but it doesn't work, neither the one that comes with Malaysk ROM

    I've already changed DSP into the advanced Auto option to no avail

    With the original firmware that app worked perfectly, has anyone got it? OR can help me to restore this functionality?
    Hello. Here are three DSP programs.
    For the green board and for the black one.
    4
    Online update version 1.1.3 from 15.02.2021
    - Added display of covers from players (online players, third-party players, except for the standard player and some players) in the screensaver, if the screensaver was installed from the OEM application before, then you need to reinstall it from there.
    Located in Mod Settings - Mod Settings - Screensaver Settings
    1. Enable display of covers (on by default)
    2. Set the transparency level of the picture
    - In Mod Settings - MOD Settings - System Settings - Pop-up Notification Settings - new settings have been added:
    1. Enable display of album covers (picture)
    2. Covers display size in px (pixels) - from 10 px to 100 px (see screenshots)
    - Fixed regular widgets (when changing DPI and installing them on the desktop in launchers)
    - Fixed loss of sound in the Radio (and then in the entire system) - a check is needed
    - Fixed loss of sound after sleep - check needed
    (do not forget to add problem players in Mod Settings - Mod Settings - Sound-related settings to the list of players that have problems with sound and, preferably, will reboot after adding, via the restart button in the status bar)
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone