• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][PX6][Q][10.0] Malaysk ROM for PX6 RK3399 with Android 10

Search This thread

jeff leggett

Member
Dec 15, 2009
15
12
Google Pixel 2
I took the latest beta update on my dasaita px6 and everything running well. Gps is spot on. Also I don't know if it's related but zlink would randomly shut down. This seems to have stopped now. Thanks.
 

Fildos

New member
Oct 14, 2021
1
0
Mod Translation
Good evening, how do I purchase the firmware? Can I have the instructions by emailing [email removed]

Original
Добрый вечер, как приобрести прошивку? Можно инструкцию на почту [email removed]
 
Last edited by a moderator:

polopulp

Member
Oct 18, 2019
6
3
the recent update is really awesome!
GPS Accuracy turn to 0 from 18.
I upload the Before and After pics.
Thanks and Good job Malaysk!
BF03E487-C480-4AB4-9419-2F09AED593C5.jpeg

5F6F306C-4673-443A-A626-5B2FB31F2F10.jpeg
 

BlackWolf92

Member
Oct 28, 2020
7
1
Hello there,

I found a problem with the last update. When i turn the cameras,the brightness is maximum. In other words, the brightness remains at the maximum niver after turning off the cameras. For example, if it is nighttime and the brightness is low, if I turn on the cameras or they turn on when parking the car, the brightness remains high on the screen.

Are there any adjustments that I could try? Performed clean installation but the problem persists

My android Head Unit is Dasaita MAX10
 

nothingunknown

New member
Jul 23, 2021
2
0
I'm running into an issue with the latest beta 1.2.

What I am seeing is that the WiFi keeps on turning on and off, seemingly on a set time. Normally, this wouldn't be an issue if I were using WiFi (since it stops doing that once it's actually connected), but I am trying to use zlink for wireless CarPlay, so what happens is that the hotspot turns on, the phone connects, then the WiFi turns on disconnecting the phone.

I tried just not connecting the phone via zlink and just trying to turn off WiFi expecting it to stay off, but it just keeps turning on again.

I turned off the setting in the Settings Mod to turn check for WiFi on boot that has the time slider to set the amount of time, but that didn't seem to stop the constant cycling of WiFi.

I will try to roll back to the stable version to see if it's an issue with the beta only.

Update: I rolled back to the current lite version on the first page and it seems to be working as expected. Wifi stays off and doesn’t try to turn itself on on it’s own. Ill probably stick with it and not even update to the regular full since ill be running CarPlay for a while and would like to not tinker around with it for now.
 
Last edited:

Graser_SJ

Member
Mar 25, 2015
10
3
I'm running into an issue with the latest beta 1.2.

What I am seeing is that the WiFi keeps on turning on and off, seemingly on a set time. Normally, this wouldn't be an issue if I were using WiFi (since it stops doing that once it's actually connected), but I am trying to use zlink for wireless CarPlay, so what happens is that the hotspot turns on, the phone connects, then the WiFi turns on disconnecting the phone.

I tried just not connecting the phone via zlink and just trying to turn off WiFi expecting it to stay off, but it just keeps turning on again.

I turned off the setting in the Settings Mod to turn check for WiFi on boot that has the time slider to set the amount of time, but that didn't seem to stop the constant cycling of WiFi.

I will try to roll back to the stable version to see if it's an issue with the beta only.

Update: I rolled back to the current lite version on the first page and it seems to be working as expected. Wifi stays off and doesn’t try to turn itself on on it’s own. Ill probably stick with it and not even update to the regular full since ill be running CarPlay for a while and would like to not tinker around with it for now.
You need to turn off in the mod settings
1. USB Initialization on startup
2. Check WiFi after booting to ....
 

nothingunknown

New member
Jul 23, 2021
2
0
You need to turn off in the mod settings
1. USB Initialization on startup
2. Check WiFi after booting to ....

That was the Wi-Fi setting I was referring to in my post, which I did have off and rebooted multiple times after I turned it off. I also had disabled the USB initialization setting turned off while I was playing around.
Because it was turning on on an interval, I almost suspect the setting stopped working, in that it just stayed active regardless of me turning it off.
 

Graser_SJ

Member
Mar 25, 2015
10
3
That was the Wi-Fi setting I was referring to in my post, which I did have off and rebooted multiple times after I turned it off. I also had disabled the USB initialization setting turned off while I was playing around.
Because it was turning on on an interval, I almost suspect the setting stopped working, in that it just stayed active regardless of me turning it off.
Very strange. When you turn off both settings, only the standard Chinese software works. If WiFI still turns on, then it is sewn into the standard software and similar behavior will be on the stock firmware
 

RedSector200

Member
May 8, 2009
10
0
Does this work only in landscape, or does it adjust to portrait ?
I have Ownice PX6 RK399 10 QQ2A which displays in portrait
MCU Version - MTCP_OLS_V3.70_1
 

nprev420

Senior Member
Jan 7, 2013
424
636
I just found that there is an app built in called "True Phone". How can I make it the default dialer? It is so much nicer and cleaner looking than the default dialer. Like when I press the call button on the steering wheel, how can I make it open that app instead of MTCDialer?
 
Last edited:

HeavyNuts

Member
Mar 23, 2019
6
0
Hi. I have a stock preinstalled some annoying app on my MTCD that cannot be deleted. Every time when I try to disabled it, it come active again after few hours. Will lite or full version remove them or allow me to do it?

Edit: Yes it will :D
 
Last edited:

Selvinlyh

Member
Nov 5, 2021
5
0
Hi.. I have this.. can I use this mod? If not, is it possible to make it suitable?

My MCU:
2021.04.27 17:38:00 YIN_53_L6315_G23P48F64_V:1.0
 

Selvinlyh

Member
Nov 5, 2021
5
0
No, you have an FYT unit. See FYT forums.

Your unit is pretty good and typically does not need modded ROMs to fix problems, that the mtcx units do
Thanks. However I think there are some small problem. Would like to update it as I think it's kinda outdated already. But there are no updates that I could find... I only manage to find joying but I'm not sure if it will work tho... I downloaded the files and unzipped it.... I'm left with another big zip file inside .. I went to plug into my unit and selected MCU Upgrade ... It couldn't recognize any of the files inside ..

Not sure if I'm required to unzip the other big file within the zip ....
 

marchnz

Senior Member
Nov 26, 2012
3,972
783
wombleton
Thanks. However I think there are some small problem. Would like to update it as I think it's kinda outdated already. But there are no updates that I could find... I only manage to find joying but I'm not sure if it will work tho... I downloaded the files and unzipped it.... I'm left with another big zip file inside .. I went to plug into my unit and selected MCU Upgrade ... It couldn't recognize any of the files inside ..

Not sure if I'm required to unzip the other big file within the zip ....
You're posting in the wrong forum and thread.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 17
    I want to write to everyone just for information, so to speak, for information :)
    The update server always contains an updated version of the firmware, so to speak, a transitional one, where fixes - additions are gradually accumulated for the next online update.
    If, for example, someone needs to reset the settings to the factory settings, then I recommend installing the LITE version of the firmware again and updating again to the Full version.
    For example, updates are now accumulated, unlike version 1.1.6:
    UPD : 09/02/2021
    - Magisk updated to the latest version 21.4
    - Manager Magisk to the latest version 8.0.7
    - In Launcher Mal Dark, the buttons on the left and right panels have been slightly redone.
    immediately open the access point settings.
    open a third-party dialer
    open MTCDialer for voice calling
    - Fixed Screen Lock
    - Fixed crash of the screensaver if it could not receive weather data from the provider. (if you installed it from an OEM application, you need to update it again after updating the firmware)
    - zlink version 4.0.14
    UPD : 11/02/2021
    - Easy Connect updated to the latest version 4.1.1
    - In Settings Mod - Settings MOD - System Settings - Pop-up Notification Settings - new settings have been added:
    1. Enable display of album covers (picture)
    2. Covers display size in px (pixels) - from 10 px to 100 px (see screenshots)
    - Fixed autostart Nav Radio + after sleep (it won't start from the background)
    - Added French and Polish translation to Mod Settings (thanks to oxygen2222 and XDA users)
    - In the Bluetooth application the panel of incoming and outgoing calls has been changed.
    UPD : 24/03/2021
    - Android base from 02/25/2021 - only for PX5
    - Android base from 12/17/2020 - only for PX6
    - Android base from 02.10.2020 - only for PX30
    - Latest version of Magisk
    - Fixed removing the bar status (after rebooting, it reappeared)
    - Added starting services after boot and sleep
    - Added a choice of delay (from 1 to 60 seconds) of the second, third, fourth application for autorun after loading.
    - Many other additions and fixes
    UPD : 26/03/2021
    - The ability to disable the standard mechanism of autorun Radio, Music, etc. standard applications (Mod Settings - MOD Settings - System Settings - Autostart applications after system boot)
    - Fixed initialization of Wi-Fi after boot.
    - Fixed launch of Radio (when launched with zero frequency and empty radio buttons)
    UPD : 30/03/2021
    - Added Italian translation to rear camera app
    - Added the ability to adjust the sound with your finger in the soundbar
    - Added the ability to display radio station logos in the Radio application, pop-up notifications, in the screensaver.
    All Radio applications that have the ability to display logos are located in the OEM application and have the word _logos at the end of the name, for example
    HCT4Radio_MOD_Malay_logos.apk
    HLARadio_MOD_Mal_logos.apk
    MTCRadio_MAL_NEW_logos.apk
    You need to reinstall the Radio applications from the OEM.
    Question: What needs to be done to show the logos of radio stations?
    Answer:
    1. Download for example this archive of logos - https://disk.yandex.ru/d/8hmqpKHga0fQHQ or download them yourself from the Internet.
    2. The picture must be in .png format, preferably with a resolution of 250X250 px or 500X500 px (the higher the resolution, the better the picture will be shown in the screensaver)
    3. Find out the frequencies of radio stations in your city by entering into Google search "frequencies of radio stations (your city)"
    4. Rename pictures in .png format with the name of the radio station frequency. For example: there is a radio station Record, it broadcasts in your city at a frequency of 102.3 -
    rename the picture with the name 102.3.png
    5. Create a Radio folder and copy all your pictures there.
    6. Copy the Radio folder to the root of the sdcard internal memory.
    It should then look something like the screenshots:
    Screenshot_20210329-124128.png
    Screenshot_20210329-124201.png
    Screenshot_20210329-153619.png
    Screenshot_20210329-165844.png



    UPD : 09/05/2021
    Android base from April 7, 2021
    Added DFX Light Processing 2 impulse to ViperFX, which radically changes the sound on the device. It needs to be activated in ViperFX.
    Added partial support for a screen resolution of 1920x1080 (for new devices that have such a screen resolution, not all applications can be installed from OEM applications). I can’t check it myself, there is no such screen.
    Updated Magisk to the latest version.
    Ability to disable autorun of standard applications after loading or after sleep. Located in Settings MOD - Mod Settings - System Settings - Autostart applications after sleep / reboot - Disable the regular autostart mechanism for Radio, Music, BT.
    The ability to change the theme Day - Night automatically by Auto screen brightness by GPS. Located in Settings MOD - Settings Mod - System settings - Auto screen brightness by GPS - Change automatically the Day / Night theme (it is advisable to reboot later so that the changes apply)
    New screensaver in the OEM application. Name - MTCScreenClock_NEW_Factory.
    Fixed theme in MOD Settings.
    Updated launcher - Launcher 10 android to the latest version.
    Fixed bluetooth application HCT4BlueTooth_Mod for light theme (reinstall it from OEM application)
    Added Portuguese translation - thanks to Nuno
    Many other fixes and additions.
    UPD : 18/05/2021
    Fixed the equalizer, which is in the OEM application - HCT7AmpSetup_NEW (did not save the settings after reboot) - you need to reinstall it from the OEM application.
    Fixed light theme in Launcher 10 android. Added the ability to change the launch of applications in the bottom bar for buttons.
    - Long press on the button - select the launched application
    - Short press - launch the application

    Well, I wrote this to keep everyone in the know, all of this will of course be in the next update, when there will be a more voluminous accumulation of fixes and everyone will receive it automatically.
    This applies to ALL PX5-PX6-PX30 units

    I will try to add information about new fixes and additions in this post! (you can bookmark it :) )
    11
    Only for devices processor Rockchip PX6, MCU - MTCD, MTCE Android 10.0 !

    Mod Q 10.0 Android PX6 RK3399
    For PX5 RK3368 mod 10 android is HERE
    Only for those who have 10 android installed, a PX6 processor and have an installed MCU that starts with MTC (X) - where X can have different letters.
    With firmware device, you need to understand all the risks. Neither I nor the website is not responsible for your actions and possibly killed devices! Everything you do - you do at your own peril and risk.

    Before installing the firmware, be sure to try to get into the Recovery (I have this method - I press the RESET button (RST) and hold the buttons on the front panel of the device until the buttons blink - I release the RESET button and immediately press the RESET button again for a short time 1-2 times ).
    IMPORTANT!!
    : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product (this is due to the fact that in 10 android these sections are dynamic and protected by the android itself from changes)- otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).

    How do you know if your device is suitable for this forum thread? You can see the device in Settings - System - About device: look at the photo

    What's added, fixed in LITE firmware version:
    Can't update Magisk module !! Only Magisk Manager can be updated!

    Root access (Magisk) 8.0.2
    IMPORTANT!! : You cannot change the firmware versions in the system partitions in LITE - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
    Added ESFileExplorer, RootExplorer programs.
    Two modified launchers with the ability to customize them (located in Mod Settings).
    Enabled the ability to start the screensaver and set the start time to 15-30 seconds 1-3-5-7-10 minutes.
    By default, video viewing while driving is enabled and audio mute in Navigation is set to -3.
    Changed basic Settings.
    Possibility to set viewing of Internet traffic speed in the Status Bar.
    Ability to change color and gradient in the Status Bar.
    Many other changes and additions.

    Installing LITE firmware version:

    Unzip the archive and write the Update.zip file to a SD card or USB flash drive (must be formatted in FAT32). Insert into the loaded device. After a few seconds, the update menu will appear. We put a checkmark on Wipe Data (you will lose all your installed programs) and click on the Install button. See the screenshot below. The machine will reboot and the firmware installation will begin.
    222222.png

    Download LITE version:
    Version updated as of September 28, 2021.


    Be sure to read the instructions inside the archive, along with the firmware !!!
    I want to warn you: Everything that you do, you do at your own peril and risk.
    Can't update Magisk module !! Only Magisk Manager can be updated!

    Download: https://disk.yandex.ru/d/UmaJ1Osxo4gd7A
    Mirror: https://mega.nz/file/E1YzgQLJ#ByqMtORsTTQD_KOZ3U-nWaVxE_WpT4BbuKthnT6lwmA

    ----------------------------------------------
    What's added, fixed in FULL firmware version:
    Can't update Magisk module !! Only Magisk Manager can be updated!


    Full root access (Magisk)
    IMPORTANT!! : You cannot change the firmware versions in the system partitions - System, Vendor, ODM and Product - otherwise you will have a BLACK SCREEN after reboot and you will have to go to RECOVERY and reinstall the firmware from there (you can without deleting the data).
    Seven completely modified launchers with the ability to view tags for listening to music (any music app), Bluetooth music and radio stations.
    The ability to customize Launchers (enable, disable unnecessary functions in the settings) and weather settings in them and display the speed via GPS.
    4 types of screen savers with analog and digital clocks, with the ability to display GPS speed, weather, music listening tags (any music application),
    Bluetooth music and radio stations from the Radio app. Full customization of screensavers - color, font, disabling unnecessary functions, your car logo, etc. In the settings.
    Change splash screen - hold your finger in the center of the screen for 3-5 seconds - the view will change. Other screensavers are in the OEM app.
    Changed the volume bar and reduced its disappearance time. It is also fully configurable in Settings Mod - Mod settings - Sound settings.
    Fully customizable panel status with the ability to enable and disable buttons and icons in it in the settings and it is possible to completely disable it.
    Reload key added to the status bar.
    Added buttons "Screensaver", "Music", "Navigation", "Bluetooth Music" in the status bar (can be enabled or disabled in the settings).
    Changed the function of calling the brightness panel in the status bar.
    The screensaver is now launched in all programs, in the Mod Settings there is an Application Whitelist, where you can specify applications where the screensaver will not start.
    Added a list of applications in the Mod settings, where you can specify autostart after sleep.
    Added equalizer ViperFX - you can watch the settings in the video
    Changed Bluetooth Music app.
    Applications Music, Radio, Video have been completely changed. You can install standard applications from the OEM application.
    Video files can be played in the background.
    Now when you switch on rear view camera the brightness is in creased up to maximum automatically
    4 different types of radio apps have been added in the OEM app (including radio with Day and Night support)
    Go to the OEM app and install the app from there.
    3 different types of Music app have been added in the OEM app.
    Split screen support (not all apps support)
    Added online radio PCRadio
    Mod settings - MOD Settings - System settings - added automatic screen brightness by GPS.
    Supports 1280X720 and 1024X600 screen resolutions.
    Added four customizable buttons to screensavers to launch your programs.
    - Long press on the button - select the application.
    - Short press on the button - start the application.
    You can now configure the MODE button to launch your applications.
    - Located in Mod Settings - MOD Settings - System Settings - Select applications to launch by pressing the MODE button.
    - If it is disabled, the standard method of operation of the MODE button is used (launching Radio-Music-Video)
    Added the ability to automatically adjust the sound based on GPS speed.
    Located in Settings mod - MOD Settings - Sound settings - Auto volume control by GPS.
    Added the ability to set pop-up messages about playing Music, Radio, Bluetooth music and PCRadio.
    Located in Mod Settings - MOD Settings - System Settings - Popup Settings.
    Fixed GPS work.
    - Improved location accuracy.
    - With a cold start - satellites are located in 40-70 seconds.
    - With a hot start (after sleep or reboot) - instantly.
    Anyone who had problems with USB ports or missing WiFi - fixed.
    USB and WiFi are initialized after the system is fully booted and after sleep.
    New method and settings of the whitelist of programs to run after sleep (located in Mod Settings - Mod Settings - System Settings)
    New whitelist for programs in which the screensaver will not start (located in Mod Settings - Mod Settings - Screensaver Settings)
    Redesigned Launcher with day and night support. Also added to Mod Settings - Mod Settings - Launchers to configure it. You can customize the display of the main screen
    - Clock, GPS speed, Weather or choose to display your logo (download a logo on the Internet (for example, a BMW car logo),
    in PNG format and preferably with a transparent background and copy the file to the device's internal memory)
    If after updating the firmware, every time the system boots, the location permissions for the launcher are asked, go to Mod Settings - Mod Settings -
    Launcher Settings - Launcher with day and night support and enable GPS speed display.
    New graphic equalizer in Music and Screensaver apps, with four different graphic equalizers and color selection.
    You can now set the time for showing music and radio notifications in Mod Settings from 1 to 10 seconds.
    You can change the DPI of the screen. The range is from 260dpi to 160dpi (standard 220 by default) - I set it to 200dpi. Located - Mod Settings - Mod Settings - System Settings.
    You can assign the launch of your applications to the buttons on the steering wheel or on the front panel of the device. Located in Mod Settings - Mod Settings - Car (as you select applications there, then assign buttons through the standard application, for setting the buttons on the steering wheel, for example). - you can watch the video on how to configure -
    More flexible graphic equalizer settings are in Mod Settings - Mod Settings - Sound Settings.
    Mod Settings - Mod Settings - Car - added GPS fix (enabled by default).
    Redesigned regular widgets for managing Music, Radio, Bluetooth music, etc.
    Configurable rear camera parking lines, you need to go to Settings Mod – Car - related settings – Extra settings and enable 1-2-3 type of Rear view ruler.
    - In Mod Settings - MOD Settings - System Settings - Pop-up Notification Settings - added settings:
    1. Enable display of album covers (picture)
    2. Covers display size in px (pixels) - from 10 px to 100 px
    - Fixed autostart Nav Radio + after sleep (it won't start from the background)
    - Added French and Polish translation to Mod Settings (thanks to oxygen and XDA users)
    - In the Bluetooth application, the panel for incoming and outgoing calls has been changed.
    - Added display of covers from players (including standard player, online players, third-party players) in the screensaver. - only for PX5 and PX6, if the screensaver was installed from the OEM application before, then you need to reinstall it from there.
    Located in Mod Settings - Mod Settings - Screensaver Settings
    1. Enable display of covers (on by default)
    2. Set the transparency level of the picture
    - Added the ability to display radio station logos in the Radio application, pop-up notifications, in the screensaver.
    All Radio applications that have the ability to display logos are in the OEM application and have the word _logos at the end of the name, for example
    HCT4Radio_MOD_Malay_logos.apk
    HLARadio_MOD_Mal_logos.apk
    MTCRadio_MAL_NEW_logos.apk
    Question: What needs to be done to show the logos of radio stations?
    Answer :
    1. Download, for example, this archive of logos - https://disk.yandex.ru/d/696euyOc9YLmiQ or download them from the Internet.
    2. The picture must be in .png format, preferably with a resolution of 250X250 px or 500X500 px (the higher the resolution, the better the picture will be shown in the screensaver)
    3. Find out the frequencies of radio stations in your city by entering into Google search "frequencies of radio stations (your city)"
    4. Rename pictures in .png format with the name of the radio station frequency. For example: there is a radio station Record, it broadcasts in your city at a frequency of 102.3 -
    rename the picture with the name 102.3.png.
    5. Create a Radio folder and copy all your pictures there.
    6. Copy the Radio folder to the root of the sdcard internal memory.
    - Ability to disable autorun of standard applications after loading or after sleep. Located in Settings MOD - Mod Settings - System Settings - Autostart applications after sleep / reboot - Disable the regular autostart mechanism for Radio, Music, BT.
    - Ability to change the theme Day - Night automatically by Auto screen brightness by GPS. Located in Settings MOD - Settings Mod - System Settings - Auto screen brightness by GPS - Change automatically the Day / Night theme (it is advisable to reboot later so that the changes apply)
    - Added DFX Light Processing 2 impulse to ViperFX, which radically changes the sound on the device. It needs to be activated in ViperFX.
    - Improved overall work speed.
    - Changes to GPS signal processing.
    - Completely rewritten from scratch Gps Parser, added support for A-GPS data from the chip side, positioning accuracy in open areas increased to 0-1 meters. (for PX5 - PX6)
    - In Mod Settings - Mod settings - Car - added a new setting to change the GPS grouping - Replacing GPS + GLONAS with GPS + BEIDOU
    - Added the function "Change commands for switching tracks using the right wheel (spinner)" - in Settings Mod - Mod settings - Car. If your right wheel does not switch music tracks in third-party players, you can try turning it on.
    EasyConnected has been updated to the latest version.
    Can't update Magisk module !! Only Magisk Manager can be updated!
    Many other fixes and additions.

    Installing FULL firmware version:

    You must download the LITE version, read the instructions inside the archive and be sure to install the LITE version on your device.

    Download FULL version:

    Installation only on LITE firmware version and only through online update. Download the LITE version and read the instructions inside the archive.

    VIDEO FULL version


    Online update 1.1.8.5 released on August 12, 2021
    Online update 1.2 released on 02 October, 2021
    Sample ViperFX settings -

    Important information (announcement of future OTA updates)
    - https://forum.xda-developers.com/t/...-rk3399-with-android-10.4176069/post-84457255
    Who wants to translate Settings into their native language - https://forum.xda-developers.com/an...roid-6-8-9-t3955343/post80203246#post80203246

    ----------------------------------------------
    Many thanks to the respected Graser from the 4PDA forum for invaluable help in creating the firmware!
    +++++++++++++++++++++++++++++
    This post is in edit mode! Errors and inaccuracies are possible!
    Please excuse me in advance! I very rarely answer questions and do not use private messages!
    6
    Released online OTA update from May 26, 2021 version 1.1.8 - https://forum.xda-developers.com/t/...-rk3399-with-android-10.4176069/post-84457255
    After installing the firmware and the first download - wait 3-5 minutes, Magisk should be automatically installed!


    Please download the update not while the car is moving, but standing in one place, otherwise the Internet is very unstable and the update may be downloaded with an error. Also, do not collapse the update menu or stop the download.

    If after downloading the update you showed error 21 in the recovery, then the update was downloaded with an error. Try again.

    Please disable all online programs while downloading the firmware (close them), for example YouTube, Yandex music, Spotify and so on.
    5
    Online update version 1.1.6 has been released.
    - Fixed work of online players (for example Spotify) after sleep.
    - New Settings Mod with support for day and night
    - Fixed DPI change
    - In the bluetooth application, the display of the contact list has been redesigned
    - Updated to the latest versions of ZLINK and EasyConnect
    - Fixed showing WiFi in the notification shade.
    - Many other fixes and additions.
    4
    Online update FULL 1.2 has been added to the BETA section.
    You can download and install in Settings Mod - OTA updates - Beta version.

    Improved overall performance.
    GPS signal processing changes.
    Gps Parser has been completely rewritten from scratch, support with A-GPS data from the chip has been added, positioning accuracy in open areas has been increased to 1 meter. (for PX5 - PX6)
    In Settings Mod - Mod settings - Car - added a new setting to change the GPS grouping - Replace GPS + GLONAS with GPS + BEIDOU
    Improved location accuracy to 0-1 meters.
    Added the function "Change commands for switching tracks using the right wheel (spinner)" - in Settings Mod - Mod settings - Car. If your right wheel does not switch music tracks in third-party players, you can try turning it on.
    Fixed screensaver (stop clock)
    Corrected HLA applications from OEM.
    Many other fixes.