CMDMOTO PRESENTS
SM-910P Sprint Note 4 Stock-ish with Tidbits[
SM-910P Sprint Note 4 Stock-ish with Tidbits[
DOWNLOADS,MODS & RECOMMENDATIONS
AT BOTTOM OF MAIN POST
CHANGE-LOG IN POST #2
HELP ME POST #3
Read Before posting Issues
JUST LOOK HERE 1ST!
AT BOTTOM OF MAIN POST
CHANGE-LOG IN POST #2
HELP ME POST #3
Read Before posting Issues
JUST LOOK HERE 1ST!
PREREQUISITE:
Please update to N910PVPU5DQI5 firmware which can be downloaded from here by using Samsung Odin
I can not guarantee that you will not have problem if you are on another firmware/modem/bootloader
OK THE DISCLAIMER PART:
I can't be held responsible for the effects of this software, it was designed for testing purposes and fun.
Please make a backup, make sure you have a computer handy with odin
Please take sometime to read all documents before proceeding, you've been warned.
Please update to N910PVPU5DQI5 firmware which can be downloaded from here by using Samsung Odin
I can not guarantee that you will not have problem if you are on another firmware/modem/bootloader
OK THE DISCLAIMER PART:
I can't be held responsible for the effects of this software, it was designed for testing purposes and fun.
Please make a backup, make sure you have a computer handy with odin
Please take sometime to read all documents before proceeding, you've been warned.
Installation Steps:
1.) Download desired Rom Version from below download link(s)
2.) Place Rom preferably on external SD card
3.) Reboot device into recovery either using Busybox or from device powered off method. (instructions in post#3)
4.) Once in recovery its HIGHLY recommended to install on a clean device. Select Wipe, Then advanced,
put check marks next to System, Dalvik-Cache, Data, Cache
5.) Recommended but NOT necessary: Once wipe is completed, back up one step and choose FORMAT DATA, it will require you to type YES to complete.
6.) When completed return back to Main TWRP screen, Click Mount and make sure System and Data are mounted.
7.) Choose Install then Navigate to where you placed Rom ( You made need to choose SD as the storage location if you put on SD )
9.) Install Rom and wait for it to complete. Once done, wipe Dalvik-Cache/Cache then select reboot and WAIT.
10) Most importantly ENJOY!
1.) Download desired Rom Version from below download link(s)
2.) Place Rom preferably on external SD card
3.) Reboot device into recovery either using Busybox or from device powered off method. (instructions in post#3)
4.) Once in recovery its HIGHLY recommended to install on a clean device. Select Wipe, Then advanced,
put check marks next to System, Dalvik-Cache, Data, Cache
5.) Recommended but NOT necessary: Once wipe is completed, back up one step and choose FORMAT DATA, it will require you to type YES to complete.
6.) When completed return back to Main TWRP screen, Click Mount and make sure System and Data are mounted.
7.) Choose Install then Navigate to where you placed Rom ( You made need to choose SD as the storage location if you put on SD )
9.) Install Rom and wait for it to complete. Once done, wipe Dalvik-Cache/Cache then select reboot and WAIT.
10) Most importantly ENJOY!
Downloads
N910PVPU5DQI5 ROM's
N910PVPU5DQI5 ROM's
Version QI5_Plus_TidBits_VB3. 0.1 UPDATED 12/26/17
Download: https://www.androidfilehost.com/?fid=745849072291696912
MD5: 12949cf4316c57e9d41c7ee455735f7b
See post #2 for change log
Version VB2.3 UPDATE
(QI5 Deodexed/Magisk SU/Busybox Added/ su.d added/Knox and Itson removed/Debloated/)
Download:https://www.androidfilehost.com/?fid=745849072291691001
MD5:8fb04d7a0c49b7a9ea7d46f8eff68b16
Version VB1.2UPDATE
(QI5 Deodexed/Magisk SU/Busybox Added/ su.d added/Knox and Itson removed/Full bloat/)
Download:https://www.androidfilehost.com/?fid=889964283620768428
MD5:69bf670e1a84df8f4e6671c1c542aa99
Version VB2.2
(QI5 Deodexed/Magisk SU/Busybox Added/ su.d added/Knox and Itson removed/Debloated)
(Im having trouble removing Itson at this time and will update when I can, Knox is removed but does show in "About Device")
Download Link:https://www.androidfilehost.com/?fid=817906626617947754
MD5: cc54ff7f04b824ccc2f171f943c118c8
Version VB1
(QI5 Deodexed/SuperSU/Busybox Added/ su.d added/Knox and Itson removed/ Full bloat)
(Im having trouble removing Itson at this time and will update when I can, Knox is removed but does show in "About Device")
Download link:https://androidfilehost.com/?fid=889964283620766514
MD5: 17301de2f9288485781c6a230458bdf9
Download: https://www.androidfilehost.com/?fid=745849072291696912
MD5: 12949cf4316c57e9d41c7ee455735f7b
See post #2 for change log
Version VB2.3 UPDATE
(QI5 Deodexed/Magisk SU/Busybox Added/ su.d added/Knox and Itson removed/Debloated/)
Download:https://www.androidfilehost.com/?fid=745849072291691001
MD5:8fb04d7a0c49b7a9ea7d46f8eff68b16
Version VB1.2UPDATE
(QI5 Deodexed/Magisk SU/Busybox Added/ su.d added/Knox and Itson removed/Full bloat/)
Download:https://www.androidfilehost.com/?fid=889964283620768428
MD5:69bf670e1a84df8f4e6671c1c542aa99
Version VB2.2
(QI5 Deodexed/Magisk SU/Busybox Added/ su.d added/Knox and Itson removed/Debloated)
(Im having trouble removing Itson at this time and will update when I can, Knox is removed but does show in "About Device")
Download Link:https://www.androidfilehost.com/?fid=817906626617947754
MD5: cc54ff7f04b824ccc2f171f943c118c8
Version VB1
(QI5 Deodexed/SuperSU/Busybox Added/ su.d added/Knox and Itson removed/ Full bloat)
(Im having trouble removing Itson at this time and will update when I can, Knox is removed but does show in "About Device")
Download link:https://androidfilehost.com/?fid=889964283620766514
MD5: 17301de2f9288485781c6a230458bdf9
NOTICE:
The install process will take some time (Approx 15-20 Min), later builds have zip-align at boot to help with de-odexed speeds.
Please help each other out, I will not always be able to answer questions due to having a family, school, work and starting a business. Please be easy on me because this is my first time to build and I am very new to this. Be aware I do NOT support other images/kernels/mods, and i'm unable to help with issues you have if you choose that route. Please post in the appropriate page where you got the images/kernels/mods for best support!
The install process will take some time (Approx 15-20 Min), later builds have zip-align at boot to help with de-odexed speeds.
Please help each other out, I will not always be able to answer questions due to having a family, school, work and starting a business. Please be easy on me because this is my first time to build and I am very new to this. Be aware I do NOT support other images/kernels/mods, and i'm unable to help with issues you have if you choose that route. Please post in the appropriate page where you got the images/kernels/mods for best support!
Bugs
None known at this time
Developer(s):
@cmdmoto
Contributor(s) and credit to :
@carlosggb for answering questions about ROM developing
@tx_dbs_tx for sending me in the right direction
@wanam for Xposed framework and XTouchWiz
@ViPER520 and @zhuhang for Viper4Android! (An absolute must have for any ROM!)
http://vipersaudio.com/blog/
Please remember to use “Compatible Mode” if you inserted other sound mods.
@topjohnwu for Magisk!
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
@Chainfire for SuperSU!
@SuperR for his wonderful Kitchen!
Built Using: SuperRs Kitchen. Great Tools For Any DEV!
XDA:DevDB Information
CMDMOTO Stock-ish plus Tidbits, ROM for the Sprint Samsung Galaxy Note 4
Contributors
cmdmoto
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: N910PVPU5DQI5
Version Information
Status: Testing
Created 2017-11-15
Last Updated 2017-12-26
Last edited:
