Development [ROM][R][OFFICIAL] LineageOS 18.1 for POCO X3 Pro [vayu]

[popej]

i can confirm that i charge with 30W, or about 5v 5.8A

It is rather something like 9-15V and 2-3A.

 

[Eric_Lev]

FYI :

TWRP 3.6.0 Released

TWRP 3.6.0 is out now for most currently supported devices.

twrp.me

Download TWRP for vayu

Download TWRP Open Recovery for vayu

dl.twrp.me

 

[Lu5ck]

does anyone know where i can find the org.lineageos.recorder with both record sound AND record screen functionality? i accidentally uninstalled it months ago and had no luck finding an apk with BOTH functionalities.

Playstore screen recorder, many of it.

 

[TheMrTesla]

It is rather something like 9-15V and 2-3A.

No it isn't, according to my wattage meter it was 28-30W combined with the 5800mA reported by accubattery it's as simple as 29W / 5.8A = 5V

 

[popej]

Accubattery shows current that goes to battery. So this current is not at 5V but rather at about 4.2V.
On USB connector voltages are different, you can read specification on charger.

 

[t-ara]

i can confirm that i charge with 30W, or about 5v 5.8A

Do you use included charger ? When I use original charger, my phone show is slow charger. I change to QC (18W), my phone show rapid charger.

 

[Lu5ck]

Not all chargers are equal
Not all cables are same too

Some cables are supposedly rated 5a while some are 3a. I don't know how true those ratings are but I do know I had cables which has really slow charging speed.

 

[vcarbajo]

Hi,

Has the video camera problem already been solved?
At the moment, I am using the gcam...

Thanks.

 

[TheMrTesla]

This is an average from 6% to 70% or 16% to 80%. when the battery is under 35C it ramps up to 5.8-6A, it's a little bit slower after 80% with about 4A.

Do you use included charger ? When I use original charger, my phone show is slow charger. I change to QC (18W), my phone show rapid charger.

Yes I do, just the included charger.

Accubattery shows current that goes to battery. So this current is not at 5V but rather at about 4.2V.
On USB connector voltages are different, you can read specification on charger.

The charger also shows that it has a supported output of 5V 6A

Playstore screen recorder, many of it.

Yes I know these exist, but that was not the question I asked because I specifically asked for the org.lineageos.recorder package with screen record functionality.

 

[popej]

The charger also shows that it has a supported output of 5V 6A

My charger is limited to 3A.

Battery in my phone is at 80% now and I can get only about 16W charge, meter shows 9.4V and 1.7A at USB.

 

[Lu5ck]

Suggestion to maintainer @SebaUbuntu .
Please retain the previous media controls which were changed in the 22nd October build. The new one may be optimised for bigger displays like tablets and in annoying on this phone as it takes up lots of space.

Before
View attachment 5445345

Before expanded
View attachment 5445347



After
View attachment 5445351
After(expanded)
View attachment 5445355

Good news.

After weeks of waiting for people to test it out, the request is merged so this problem should be fixed on next nightly.

https://review.lineageos.org/c/LineageOS/android_frameworks_base/+/318501

Yes I know these exist, but that was not the question I asked because I specifically asked for the org.lineageos.recorder package with screen record functionality.

The stock recorder is just a voice recorder though....

 

[dey18]

Good news.

After weeks of waiting for people to test it out, the request is merged so this problem should be fixed on next nightly.

Thanks @Lu5ck .

 

[dey18]

I just managed to reproduce the problem.
It only happen when your phone is connected to pc and then you reboot the phone while still connected, the usb debugging will turn on itself after booting. Then thereafter, it will keep doing the same thing even not connected to PC.

@SebaUbuntu another bug

Did you find any workaround for this as I am affected?

 

[leis1123]

Hi,friend

Doesn't Linege OS 18.1 support carrier aggregation (LTE+)?

I couldn't find the configuration item for carrier aggregation.

 

[Lu5ck]

Did you find any workaround for this as I am affected?

The workaround is to disable developer options.

I just cherry picked the fix from other branches

https://review.lineageos.org/c/LineageOS/android_device_xiaomi_sm8150-common/+/319645

 

[ilovebytes]

hmm i seem a little bit stuck on installing los 18.1 on a new poco x3 pro. i tried it as i normaly did, with a clean first install but on step seems not to work like on other phones i already installed los (mi 9 lite, poco x3 without pro, poco m3 just to mention the phones i installed lately)

thats what i did:

it was at stock on latest eu official rom 12.5.3.0

1. unlock Phone
2. install twrp (took the official one 3.6.11 i think) via fastboot
3. directly boot into twrp recovery to make it permanently
4. there format data (confirm with yes)
5. reboot to recovery (to get the partititons back)
6. install latest los nightly

but with steps 4-5 there seems to be a problem - because after rebooting into recovery in step 5 i usually copied the los zip over and then continued with step 6 but now on x3 pro the file system on the pc does not show up so i can not copy anything to it but on the phone it shows normaly with ~200gigs of space

when i copy the los.zip onto an sdcard so that i do not need to copy it onto the phone after step 5 i get error 1 because some partitions like /system_ext; /product; /vendor and /odm can not be mounted.

so how can i perform a really clean install if format data does not seem to work ? or is there another way to go with the poco x3 pro to get a clean install with formated data ?

 

[k3lcior]

@ilovebytes after flashing LOS you have to format Data and then reboot to System.

 

[ilovebytes]

oh i see so first step 6 and then 4 and 5 - right ?

ok i will give it a try after downloading latest official fastboot eu image to flash from miflash in order to get out of the bootloop and the needed partitions back

thx for your fast answer and help

 

[k3lcior]

You dont have to reboot back to recovery after flashing ROM and formatting Data, you can reboot back to System.

 

[dey18]

The workaround is to disable developer developer options

Still doesn't work here!