[ROM] [R760XXU1APK7] [2.3.2.1] [OXA] Samsung Gear S3 SM-R760

Search This thread
By:
Advanced…
S

se47

Member
Nov 2, 2006
24
41
Moscow
https://1drv.ms/u/s!AiN2zfzVljOkgfNp7eZqfHBoJajmBw

Enjoy :)

For flashing need NetOdin: https://1drv.ms/u/s!AiN2zfzVljOkgfNqAmRV7_n54YOdgQ

Instruction:

Step 1: On your S3 press then hold the Home/Power button until you see the S3 screen shows up "Rebooting..."

Step 2: Release the Home/Power button then quick Press it again 03 times.
Next step, you need to be a bit quicker.

Step 3: Use the Home/Power button to navigate to "Download (wireless)" option, then Press & Hold the Home/Power button to select. You have to be real quick otherwise your S3 will reboot.

Step 4: Press the Home/Power button twice, you will see the "[WPS Mode]" change to "[AP Mode]"

Step 5: Choose the Access point with the same name appears on your S3.

Step 6: Your S3 will show that it's been connected to the IP of your computer.

Step 7: Open the Odin, your S3 will show up.

Step 8: Choose the right file for each Option BL, AP and CSC from the files you extract after downloading. Then press Start and wait the PASS (15-20 minutes)
 
  • Like
Reactions: ajaredic, naroon, adfree and 5 others
A

aalupatti

Senior Member
Feb 20, 2011
2,871
700
se47 said:
https://1drv.ms/u/s!AiN2zfzVljOkgfNp7eZqfHBoJajmBw

Enjoy :)

For flashing need NetOdin: https://1drv.ms/u/s!AiN2zfzVljOkgfNqAmRV7_n54YOdgQ

Instruction:

Step 1: On your S3 press then hold the Home/Power button until you see the S3 screen shows up "Rebooting..."

Step 2: Release the Home/Power button then quick Press it again 03 times.
Next step, you need to be a bit quicker.

Step 3: Use the Home/Power button to navigate to "Download (wireless)" option, then Press & Hold the Home/Power button to select. You have to be real quick otherwise your S3 will reboot.

Step 4: Press the Home/Power button twice, you will see the "[WPS Mode]" change to "[AP Mode]"

Step 5: Choose the Access point with the same name appears on your S3.

Step 6: Your S3 will show that it's been connected to the IP of your computer.

Step 7: Open the Odin, your S3 will show up.

Step 8: Choose the right file for each Option BL, AP and CSC from the files you extract after downloading. Then press Start and wait the PASS (15-20 minutes)
Click to expand...
Click to collapse
Is this the European update?
Anywhere there is a changelog?
Thanks

Sent from my Pixel XL
 
Sword Fish

Sword Fish

Senior Member
Dec 15, 2011
440
99
Calgary
The OP is from Australia so I assume it is probably from there. Since Samsung Pay is supported there, I wonder if you flash the csc if that would allow us to install SP on our Gears in Canada

Swordfish
 
G

Gamemaster1379

Senior Member
Aug 2, 2012
72
6
What does this rom allow for over stock? I'm having trouble connecting a CM note 4 with stock and wondering if this'll be better
 
Sword Fish

Sword Fish

Senior Member
Dec 15, 2011
440
99
Calgary
Sword Fish said:
The OP is from Australia so I assume it is probably from there. Since Samsung Pay is supported there, I wonder if you flash the csc if that would allow us to install SP on our Gears in Canada

Swordfish
Click to expand...
Click to collapse
Not sure why I thought the OP was from Australia, obviously I looked in the wrong place.

I see the CSC is OXA which I believe means UK version. I would like to find a US version so I can flash and get Samsung Pay on my watch. We have SP in Canada but for reasons no one knows, Samsung won't allow us to install it on our watch. I believe this comes from looking up the csc to see what country code is in there. Our watch must have a different csc than the US watches.

Swordfish
 
calinormy

calinormy

Senior Member
Jul 18, 2008
578
145
se47 said:
https://1drv.ms/u/s!AiN2zfzVljOkgfNp7eZqfHBoJajmBw

Enjoy :)

For flashing need NetOdin: https://1drv.ms/u/s!AiN2zfzVljOkgfNqAmRV7_n54YOdgQ

Instruction:

Step 1: On your S3 press then hold the Home/Power button until you see the S3 screen shows up "Rebooting..."

Step 2: Release the Home/Power button then quick Press it again 03 times.
Next step, you need to be a bit quicker.

Step 3: Use the Home/Power button to navigate to "Download (wireless)" option, then Press & Hold the Home/Power button to select. You have to be real quick otherwise your S3 will reboot.

Step 4: Press the Home/Power button twice, you will see the "[WPS Mode]" change to "[AP Mode]"

Step 5: Choose the Access point with the same name appears on your S3.

Step 6: Your S3 will show that it's been connected to the IP of your computer.

Step 7: Open the Odin, your S3 will show up.

Step 8: Choose the right file for each Option BL, AP and CSC from the files you extract after downloading. Then press Start and wait the PASS (15-20 minutes)
Click to expand...
Click to collapse
Can you obtain and post the firmware for aR765 ( frontier lte?) Thanks

Sent from my SM-G935F using XDA-Developers mobile app
 
Z

zahidismaeel

Member
Mar 25, 2009
35
2
se47 said:
https://1drv.ms/u/s!AiN2zfzVljOkgfNp7eZqfHBoJajmBw

Enjoy :)

For flashing need NetOdin: https://1drv.ms/u/s!AiN2zfzVljOkgfNqAmRV7_n54YOdgQ

Instruction:

Step 1: On your S3 press then hold the Home/Power button until you see the S3 screen shows up "Rebooting..."

Step 2: Release the Home/Power button then quick Press it again 03 times.
Next step, you need to be a bit quicker.

Step 3: Use the Home/Power button to navigate to "Download (wireless)" option, then Press & Hold the Home/Power button to select. You have to be real quick otherwise your S3 will reboot.

Step 4: Press the Home/Power button twice, you will see the "[WPS Mode]" change to "[AP Mode]"

Step 5: Choose the Access point with the same name appears on your S3.

Step 6: Your S3 will show that it's been connected to the IP of your computer.

Step 7: Open the Odin, your S3 will show up.

Step 8: Choose the right file for each Option BL, AP and CSC from the files you extract after downloading. Then press Start and wait the PASS (15-20 minutes)
Click to expand...
Click to collapse

Hello expert

This is my version R760OXXU1APL2 , bought from Korea and having serious issues with viber calling(https://forum.xda-developers.com/ge...viber-call-t3534637/post70462438#post70462438) .

So can i install this firmware on my S3-Frontiner ?

Thanks
Zahid Ismail
 
G

guitareth

Senior Member
Jul 21, 2008
59
2
henklbr said:
People:

DON'T INSTALL FIRMWARE FROM UNTRUSTED SOURCES!!!
Click to expand...
Click to collapse

Well said. No info included in the post as to what it's for, what benefits it gives, or where it's from, and no warnings about the risks you take if you choose to install software/firmware from a non-official source. I'd suggest to avoid this unless you are happy to take all the risks that it may brick your watch etc.
 
You must log in or register to reply here.

Similar threads

H
  • Sticky
Gear S3 Root and Kernel Source! (Android Wear Port Thread)
Replies
1K
Views
474K
duandidamowang
duandidamowang
EMP83
[Guide] How to change Gear S3 R760 CSC whitout flashing a rom.
Replies
196
Views
150K
tyler78
tyler78
A
  • Sticky
Watch faces made with Gear Watch Designer
Replies
707
Views
493K
M
MatthewWHV
S
[ROM] [R760XXU2BQC5] [2.3.2.3] [OXA] Samsung Gear S3 SM-R760
Replies
61
Views
51K
C
coolviru
deadman96385
  • Sticky
[ROM] Tizen 4 NetOdin SM-R765A/R765F/R765T/R765V/R775A/R775S/R775R/R775V/R770/R760/
Replies
239
Views
119K
75baallu
75baallu

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 8
    S
    se47
    https://1drv.ms/u/s!AiN2zfzVljOkgfNp7eZqfHBoJajmBw

    Enjoy :)

    For flashing need NetOdin: https://1drv.ms/u/s!AiN2zfzVljOkgfNqAmRV7_n54YOdgQ

    Instruction:

    Step 1: On your S3 press then hold the Home/Power button until you see the S3 screen shows up "Rebooting..."

    Step 2: Release the Home/Power button then quick Press it again 03 times.
    Next step, you need to be a bit quicker.

    Step 3: Use the Home/Power button to navigate to "Download (wireless)" option, then Press & Hold the Home/Power button to select. You have to be real quick otherwise your S3 will reboot.

    Step 4: Press the Home/Power button twice, you will see the "[WPS Mode]" change to "[AP Mode]"

    Step 5: Choose the Access point with the same name appears on your S3.

    Step 6: Your S3 will show that it's been connected to the IP of your computer.

    Step 7: Open the Odin, your S3 will show up.

    Step 8: Choose the right file for each Option BL, AP and CSC from the files you extract after downloading. Then press Start and wait the PASS (15-20 minutes)
    View
    3
    B
    BokkieAndijk
    Thanks to Adfree i found info how to get my S3 back to live again. If you have the same problems with your (bricked) S3 then go to download wirelessly mode en as soon as you see the flower then push the power button 2 seconds en let it go for 1 second, than push it again for 2 seconds en let it go for one and so on til you get him in to download wirelessly mode. May take some attempts but it saves my ass a few times. I where not able to flash the firmware from this post but succeeded to flash R760XXU2BQC5_R760OXA2BQC5.zip. My goal was to use the S3 Frontier with my rooted Tab s2 SM-819 LTE. I where able to pair and use some futures of Gear manager but not all. For example i where unable to connect to the Galaxy store to download and install new watch fases. Then i got the pioneeristic idea to look at the build.prop of mij S7 EDGE SM-G935F and changed a lot of things in the build.prop of the tablet into the things like on the phone. Now everything is working like a charm and i got a notification about an update for the Gear manager. I downloaded and installed this update and everything is still working like a charm. After that the app store is even showing Gear manager as an installed app. If someone is in the same situation, i would love to help. Maybe its a good idea to make a copy of mij tweaked build.prop and post it here?
    View
    2
    henklbr
    henklbr
    Trusted Source?

    People:

    DON'T INSTALL FIRMWARE FROM UNTRUSTED SOURCES!!!
    View
    2
    A
    adfree
    @BokkieAndijk

    Sorry, look into this Thread:
    https://forum.xda-developers.com/gear-s3/how-to/gear-s3-android-wear-port-wip-t3584588

    Here are service Manuals and Pictures...

    You need USB cable...

    WiFi is now disabled... this is F%&ing Security protection...

    Best Regards
    View
    1
    fgar82
    fgar82
    adfree said:
    Please be VERY carefully with your ideas... otherwise you have dead/bricked Gear S3...

    1.
    1APK7 is old/obsolete and dangerous, because Samsungs Rollback Prevention Knox crap...
    Look here for some background infos:
    http://developer.samsung.com/tech-insights/knox/platform-security

    2.
    If you mean with ATT...
    SM-R765A
    :confused:

    Here is SM-R760 Thread....

    3.
    Again, please be carefully.
    Think first... then flash... AT YOUR OWN RISK. :D ;)

    Best Regards
    Click to expand...
    Click to collapse

    Thnx for the reply well did it in the end thought it worked didnt get any error using odin but the watch got stuck on odin and what ever u do it takes u back to same page... sent it back for replacment.... wont be playing with FW on the GS3 anymore !!

    thnx fpr the help
    View

New posts