[ROM][Redmi 2] CAF_AOSP_6.0.1 for Redmi2 WT88047

[saurabh1234]

I don't have that issue.
Did you "dirty-flash" or something..?
Can you please do a factory reset or reflash it clean ?

I'm not sure, but I think someone in cm13 thread had this issue if he touches some of the buttons while flashing/booting.. if I'm not wrong...

ok..i will try...and tell you...

---------- Post added at 02:35 PM ---------- Previous post was at 01:36 PM ----------

I don't have that issue.
Did you "dirty-flash" or something..?
Can you please do a factory reset or reflash it clean ?

I'm not sure, but I think someone in cm13 thread had this issue if he touches some of the buttons while flashing/booting.. if I'm not wrong...

yes you were right...if on booting touch buttons..buttons will not work..now it is working...
i got too bugs...
1. heating problem
2. setting language other than english US...it give android.phone fc...

 

[pirej]

ok..i will try...and tell you...

---------- Post added at 02:35 PM ---------- Previous post was at 01:36 PM ----------



yes you were right...if on booting touch buttons..buttons will not work..now it is working...
i got too bugs...
1. heating problem
2. setting language other than english US...it give android.phone fc...

I'll see about 2, but about the heating... What/how... Some extra info?
I'm not playing games or similar if that's when heating happens

 

[saurabh1234]

I'll see about 2, but about the heating... What/how... Some extra info?
I'm not playing games or similar if that's when heating happens

yes playing games....gives heating....i am playning two games bubble panda and asphalt 8..
2nd problem come when you cchange language to other than eng US...then try to open mobile network from data usage...and then u will see fc...

 

[pirej]

@saurabh1234 Is heating different(better or worse) in different rom's?
If yes.. then in which one is better then in others ?

 

[saurabh1234]

@saurabh1234 Is heating different(better or worse) in different rom's?
If yes.. then in which one is better then in others ?

in latest caf...i saw that it increase about 45 deg in my device while playing...
but i tried tesla and nx rom latest and du also...are not heating......
it is not worse but it heating more as compared to DU and others...

 

[pirej]

Ok, i feel that this is more like an subjective comparison, since "du" and "caf" have the same device-tree/common-device-tree/kernel and good part of the other repos..
Anyway, thanks for trying and reporting, ill do a little research about this..

 

[SWARNADIIP]

I cant use other kernel like berserk kernel.. Its not supporting i guess.. Though this rom is very cool.. Plz try if u can make some time out for this issue..

 

[pirej]

I cant use other kernel like berserk kernel.. Its not supporting i guess.. Though this rom is very cool.. Plz try if u can make some time out for this issue..

It would be an issue if it doesn't support its own kernel
Not supporting another kernel.. it's not an issue that needs to be solved by me.

 

[DecaPix]

@pirej, just installed your ROM.
all 4 cores of the cpu are running. even i set min speed to 400 mhz it wont change.
i think this will cause battery drain.
tried to connect to android wear last night but it wont connect. will try again today and see.
YAS sensor is working. but any idea what is ltr553-pocket?

great rom btw. just some minor items to fix

 

[pirej]

@pirej, just installed your ROM.
all 4 cores of the cpu are running. even i set min speed to 400 mhz it wont change.
i think this will cause battery drain.
tried to connect to android wear last night but it wont connect. will try again today and see.
YAS sensor is working. but any idea what is ltr553-pocket?

great rom btw. just some minor items to fix

Thank you for reporting about YAS, my device doesn't have "yas" sensor so i couldn't know..
After all seems that GCC 4.9 beak's it, that's why i tried with GCC 4.8.
Thanks again.
About minimal frequency.. it was set to 800 by CAF, not by me, i lowered it to 400 a couple of day's ago, but its not using it properly, ill have to do some other tweaks.
Also "adaptive LMK" was not activated because of the wrong product name.
ltr553-pocket its a sensor for pocket, to make sure its full of money.. hahahah
But its not for our device, "It detects if the phone is inside pocket"
For android wear.. i dont have a clue, im not using that, if you take a logcat maybe i will(not) see something usefull.
You can try the test kernel with 400mhz enabled.

 

[saurabh1234]

i ported BeansTALK rom from Moto G3...
I used CM-13 By Kuma as base and then Used Beanstalk as port...
then i ported beanstalk with old method...
and then used updater script from Pirej's Caf-AOSP rom..

and see rom booted and come to setup wizard...
now i got two fc's
1. Music app fc
2. CM actions Fc (this occurs and device reboots and continues fc and then again reboot..)

Please help me...

 

[pirej]

i ported BeansTALK rom from Moto G3...
I used CM-13 By Kuma as base and then Used Beanstalk as port...
then i ported beanstalk with old method...
and then used updater script from Pirej's Caf-AOSP rom..

and see rom booted and come to setup wizard...
now i got two fc's
1. Music app fc
2. CM actions Fc (this occurs and device reboots and continues fc and then again reboot..)

Please help me...

My CAF rom and CM13 are different in other things too, not just by android tweaks and themes/features, so the update script its not 100% compatible between them.
It would be better if you find update script from some CM13 based rom.. and that would probable be every other rom excerpt "caf" and "du"(its based on caf)
Anyway.. pull a logcat and examine it, without logcat.. nothing..

 

[DecaPix]

Thank you for reporting about YAS, my device doesn't have "yas" sensor so i couldn't know..
After all seems that GCC 4.9 beak's it, that's why i tried with GCC 4.8.
Thanks again.
About minimal frequency.. it was set to 800 by CAF, not by me, i lowered it to 400 a couple of day's ago, but its not using it properly, ill have to do some other tweaks.
Also "adaptive LMK" was not activated because of the wrong product name.
ltr553-pocket its a sensor for pocket, to make sure its full of money.. hahahah
But its not for our device, "It detects if the phone is inside pocket"
For android wear.. i dont have a clue, im not using that, if you take a logcat maybe i will(not) see something usefull.
You can try the test kernel with 400mhz enabled.

Pirej, your test kernel didnt work.
I followed this guide to get 400 mhz.
but all 4 cores are up. in CM, some cores will go offline when CPU load is low.
Managed to get android wear to connect after i restart the phone and the watch.

When i click settings>mobile networks then error of com.android.phone has stopped will appear.
think it's the modem bug?

 

[KagamiNator]

New build out ( its uploading now..)
caf_wt88047-13-03-2016-eng.pirej
The rom doesnt have f2fs support, use ext4
(EDIT: f2fs should work with the kernel in the next post)

change log

Updated sources from CAF
Removed qcom dev tools
materialized some of the apps[COLOR="Black"][COLOR="black"][COLOR="black"][COLOR="black"][COLOR="black"][/COLOR][/COLOR][/COLOR][/COLOR][/COLOR]
fixed back-light issue when offline charging 
updated browser permissions management
reboot to recovery from power menu works...

happy flashing

edit: there is something wrong with "busketbuild" uploading fails..
In meanwhile i have uploaded it on "mega nz"

I'm on latest developer beta of MIUI 7 by Xiaomi.eu, do I still need to extract boot.img and flash it before flash ROM on latest build?

 

[pirej]

Pirej, your test kernel didnt work.
I followed this guide to get 400 mhz.
but all 4 cores are up. in CM, some cores will go offline when CPU load is low.
Managed to get android wear to connect after i restart the phone and the watch.

When i click settings>mobile networks then error of com.android.phone has stopped will appear.
think it's the modem bug?

Thanks for the info, i'm trying the same using this..
Yes , all 4 cores are up, its not a bug, its caf feature, different power management, not a bug
When i get this right(using all of the frequencies), then ill see about "all-4 up"

I'm on latest developer beta of MIUI 7 by Xiaomi.eu, do I still need to extract boot.img and flash it before flash ROM on latest build?

Yes.
####################
EDIT: it needs tweaking to get optimal settings, but..

 

[pirej]

New build out

caf_wt88047-17-03-2016-eng.pirej.zip

changelog:

enabled all the cpu supported frequencies
tried to tweak the cpu load..
re-enable adaptive LMK

 

[saurabh1234]

New build out

caf_wt88047-17-03-2016-eng.pirej.zip

changelog:

enabled all the cpu supported frequencies
tried to tweak the cpu load..
re-enable adaptive LMK

is that fc is fixed or not...??
and heating..??

 

[pirej]

is that fc is fixed or not...??
and heating..??

I didn't even try to fix it, sorry.. i gave the phone to my wife, so i cant use it full-time for taking logs, fixing, flashing all the time.
If you can provide a logcat from the time FC occurs.. maybe i could find a fix.
About the heating... no games here.. try it your self.

I hope the last changes will provide smoother experience and more battery backup.

 

[rohitsonone]

I didn't even try to fix it, sorry.. i gave the phone to my wife, so i cant use it full-time for taking logs, fixing, flashing all the time.
If you can provide a logcat from the time FC occurs.. maybe i could find a fix.
About the heating... no games here.. try it your self.

I hope the last changes will provide smoother experience and more battery backup.

I hope you don't quit this device,I have gone through all of your posts just now,passion you have for building these roms it's just amazing. People like you @Pirez @ketut.kumajaya @emfox that we are able to flash these ROMs and complain about bugs. Best luck to you buddy

 

[pirej]

I followed this guide to get 400 mhz.
but all 4 cores are up. in CM, some cores will go offline when CPU load is low.

I made another test kernel with some features added:

intelli hotplug
faux sound control
USB fast charge

So .. you have a toy to play with :silly:

Im not using all of those stuff in my main kernel, but just for testing.
You have to flash the latest rom build to have all frequencies working, then flash this new kernel to get those extra features.
I changed some of the "target_loads" and i think it uses the lower frequencies better if you change it to

200000:40 400000:95 533000:85 800000:85 998400:90 1094400:80