I dont think so.... The updates are unified from now on, thats right, but my device for example still shows EEA in the buildnumber... So i think, that the "factory firmware" still is different and on update the device chooses the right files.
General [ROM][Restore][Unbrick] Nothing OS v1.5.3(HotFix) Global/EEA Fastboot ROM(Full ROM) & boot.img & QFIL ROM (EDL)
- Thread starter ot_inc
- Start date
Alright that i didnt know.. Mine shows EEA as well now that i look in settings
I had the same problem but you need to fastboot flashing unlock_critical and flash both slots
Anyway I'm already unlock and done that,I'm trying reflashing rom
You were integrating.
Well, I'll change it so that we can use it in common later.
Well, I'll change it so that we can use it in common later.
Flash unlock, flash unlock critical, flash slot a and b .... bootloader stuck... 1.5.1 and same with 1.5.0.
Easy to flash PE or Paranoid, but this is not working for me.
Am i missing something?
Easy to flash PE or Paranoid, but this is not working for me.
Am i missing something?
Last edited:
Tr
After installing on both slots then try to boot if it bootloop then change the active slot like if you flashed slot b and rebooted and phone stuck on bootloop then go to fastboot again and change the active slot to a and then try to boot. It will work for sure....
How would my process then be? If you would be so kind
edit.
Did try to flash slot a, flash slot b, bootloop ... set active a and b, bootloop on both.
Last edited:
bootloop bootloader?...did you flash boot.img and vendor_boot.img before flash?
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
1
Hello, i flashed 1.5.2 via fastbootd (command: adb reboot bootloader to get to fastbootd)
flashing slot b works flawless and
i can flash crictical paritions without unlocking critical paritions !
(thanks to @TheNewHEROBRINE for the idea which i tested and worked for me flawless first try)
What's still not working is to flash slot a where i get bootloop to bootloader. I need to manually changed the active slot to b again to properly start the phone again, if slot b was already flashed).
Best Regard's
Alex19111
As fair as I know, you can get at most one slot to be bootable at a time. I don't know exactly why however.1
Hello ^^
1. I rebooted to fastbootd, via the command "adb reboot fastboot" (when your phone is booted in Nothing OS connect via USB to your Pc with ADB (Enable USB-Debugging)
2. i did not check the slot, it would not let me check it in normal fastboot (commands locked?). use "flash-slot-b.bat" only
a-slot is somehow not flashable even if its there.
3. i can't clarify if it was "the inactive slot" but it worked.
4. sorry i can't remember. I think you can change slots via fastbootd which should happen after flash.
I hope i could clarify it for you, if not, i'm wiling to help you out.
I try to remind how exactly i did the procedure.
Best Regard's
Alex19111
My phones bootloader is unlocked but critical partitions is still locked -> no need to unlock
command to change slots: fastboot set_active a or fastboot set_active b
EDIT: Switching slots via fastbootd did not work for my
So if you get a bootloop try to switch slot via normal fastboot, this is what i did after flashing a slot where i got a bootloop from, so you maybe can do the opposite.
For short: if you use a fastboot rom flashed via fastboot or fastbootd it always should boot up, if not there could be a bigger Problem or you then need another solution for example: EDL.
Best Regard's
Alex19111Finally was able to update to 1.5.2 via fastboot method
In my case, previously has 1.5.1 beta hotfix and all updater methods were failing with Error 20
I booted to fastboot and checked for active slot using fastboot getvar current-slot and found that slot a is active.
So I went and flashed the fastboot package to slot b (inactive one) and then rebooted. The rom flashed well and it successfully booted.
Rebooted back to fastboota and when I typed fastboot getvar current-slot found that slot b was active now.
So the learning is that - for updates, ideally we need to flash to inactive slot and then it should be activated automatically. -
11Update! : 2023/03/23 4:46 (UTC+9:00)
Fastboot ROM and boot.img for NothingPhone(1) are now available. v1.5.3(HotFix) is available.
Sorry for my poor English, I'm Japanese...
News: The DSU has been restored in this version. It seems to be usable as long as it is non-root.
The content of this site has been changed because Global and EEA have merged. (Global)" section is for Global only.
I think v1.5.1 or later can be used for all types.
I selfishly want the EEA version.(White..!)
I'd like to do some verification and such.
Attention!
This fastboot ROM requires 'fastboot flashing unlock' and 'fastboot flashing unlock_critical'(Option)!
2023/02/13 0:44 (UTC+9:00)
Add QFIL ROM (⚠EDL Command or EDL Cable V1/V2 Required)
I haven't tried it myself; there is Firehose, so you can use it however you like.42
