Factory images are on the fileserver in my signature.
[ROM][RK3066/RK3188][SD/HD] Factory firmware - share place link with all
- Thread starter Malaysk
- Start date
I just got round to trying this out... much faster than previous versions. Thanks.
EasyConnected.HT05.4.3.6-170302
Scavenged from the 6.0.1 Android image:
ec-4.3.6.zip
I have got the entire image, but it's for an rk3368 processor... Just for parts?
Here's another one: MTCRadio_kld.zip
Check it out.
Scavenged from the 6.0.1 Android image:
ec-4.3.6.zip
I have got the entire image, but it's for an rk3368 processor... Just for parts?
Here's another one: MTCRadio_kld.zip
Check it out.
Last edited:
Maybe work on adapting it for the RK3188 then ?Scavenged from the 6.0.1 Android image:
ec-4.3.6.zip
I have got the entire image, but it's for an rk3368 processor... Just for parts?
Here's another one: MTCRadio_kld.zip
Check it out.
The Link shows an 404 not found Error.
I would like to get back to Stock with my Device
MTCB KLD1 RK3066 800x480
Actually i have the latest Malaysk Rom installed but with that ROM my back USB Ports for 3G/WIFI wont work so i cannot get any USB Camera working..
Maybe you have a solution for me mate ?!
Thanks in advance !
I have emailed the owner of the fileserver and I m waiting for a response.
Tried radio, but not working :/Scavenged from the 6.0.1 Android image:
ec-4.3.6.zip
I have got the entire image, but it's for an rk3368 processor... Just for parts?
Here's another one: MTCRadio_kld.zip
Check it out.
Guys here is my HU information. I'm wondering what ROM should I download for mine's. I tried KingRoot to root it and it didn't work. Here is my HU info:
MCU version：
MTCC-KLD6-V2.91
May 31 2016 19:54:14
Android version：
5.1.1
1024*600
Kernel version：
3.0.101+
[email protected] #10
Wed Jul 20 15:59:15 CST 2016
Build number：
rk3188-userdebug 05082016.16:30:02
MCU version：
MTCC-KLD6-V2.91
May 31 2016 19:54:14
Android version：
5.1.1
1024*600
Kernel version：
3.0.101+
[email protected] #10
Wed Jul 20 15:59:15 CST 2016
Build number：
rk3188-userdebug 05082016.16:30:02
Can you please point me in the direction of that ROM? You don't like Malaysk's ROM, Why?
Lucky for you, I had only just updated my system to the latest DSA's Rom so know its here at post #219.
I like Malaysk's Rom and was using it before I found DSA.
I prefer a minimalistic system and DSA's is just that. It's not as flashy as Malaysks, but it is far more lightweight and so when I add all the apps I need to it; I don't have to worry about resources.
I see there is a two part. I'm good flashing ROM on my phones, but I'm new to the HU flashing. How I flash this on my HU. I would appreciate any help on this. Please see my HU's information below:
MCU version：
MTCC-KLD6-V2.91
May 31 2016 19:54:14
Android version：
5.1.1
1024*600
Kernel version：
3.0.101+
[email protected] #10
Wed Jul 20 15:59:15 CST 2016
Build number：
rk3188-userdebug 05082016.16:30:02
Theres are numerous guides on here. Put unzipped update on sdcard, put in gps slot, go to settings update and it will update.
It's the usual procedure: unrar the 1024x600 files (starting with first part, both being in same folder), obtain file update.img, put it onto the GPS (first) SD card, and get into recovery menu (quickest by keeping the volume button, if available, depressed). Or wait until the firmware file (update.img) presence is automatically detected. Finally, immediately, if possible, after first boot is starting (don't wait for the full sequence), get again into recovery and select that menu entry which formats the storage partitions thoroughly since the new image is differently partitioned. Then reboot and get ready to reinstall all your apps, etc.
The option is there in recovery but I've never tried it. No harm in trying.
I have many times, worls exactly the same as from SD card.
DSA ROM is nice. I would like to try Malaysk the link on the OP's page does not work.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone