[ROM][RK3066/RK3188][SD/HD] Malaysk ROMs Android 4.4.4 for any yet known MTCB-Device

[-=Gerner=-]

Is it possible to implement this launcher from Pumpkin in your FW?
I've tried to copy the launcher.apk in to your FW but it doesn't work.
I like the way it looks
Thanks

It looks good. Could You upload somewhere ?

 

[halloj]

And where he APK file? I'll see.

Here it is below.

 

[bsavoir22]

I don't know. I am using Malaysks rom since I got the radio and I don't want to install the stock rom, because there is option for a Nandroid Backup.

Ok, we'll if someone here still has the stock firmware could maybe check to see if it works. The Chinese manufacture probably removed the codec from the device, most modified roms are based on stock OS from that manufacturer as this version of android is Very basic.

Sent from my SM-N910T using Tapatalk

 

[m4f1050]

I use Plex, but from the sound of it this is related to the stock video player, correct? There is an Open Source library from Cisco but can the player be modified to use this library?

https://github.com/cisco/openh264

Sent from my SM-N910T using Tapatalk

 

[Breach]

Installation Instructions:

1) Settings - Backup&Reset - Factory data reset - Put a tick on Erase SD card - Reset machine
2) Install the ROM from inside the Recovery and clear data or from inside the ROM Settings> About machine> System update (clean data)
3) Go to Recovery - The second paragraph from the bottom - Wipe data
4) after reboot Settings - Backup&Reset - Factory data reset AGAIN
5) Reinstall the ROM AGAIN


If you have any problem repeat step 4 and 5 again and check your ROM Download.

Notes:
Check: Go to Settings - Partition Info (second paragraph from the bottom) and a section view DATA - It should be the size of 1.96 GB
Activate Xposed Module by installing it.
How to enter Recovery: Each unit is different, please search the forum for that
1) If you have Physical button/knobs: usually Holding the Power button or knob as soon as the system turns on will get you to Recovery (you can select items in Recovery by press and HOLDing the Power)
2) If Touch Buttons: Put something thin and press and hold the Reset button as the Unit turns on (you can select items in Recovery by press and HOLDing the reset)

Are we sure this is exact for every head unit? Followed 1-5 and the firmware updated, but I do not see a "DATA" in the Partition Info at all.

 

[-=Gerner=-]

Are we sure this is exact for every head unit? Followed 1-5 and the firmware updated, but I do not see a "DATA" in the Partition Info at all.

If You already a FUSE ROM user, than You don't need to do a wipe. Just do a simple update ... But, in this case You also need re-activate some feature, like Xposed framework, PCV ....

 

[Breach]

If You already a FUSE ROM user, than You don't need to do a wipe. Just do a simple update ... But, in this case You also need re-activate some feature, like Xposed framework, PCV ....

I went from the stock rom on the Joying 10.1 to the latest Malak firmware following the above steps

 

[-=Gerner=-]

I went from the stock rom on the Joying 10.1 to the latest Malak firmware following the above steps

Yeah, at first time, must do all steps, carefully, explain as readable at the first page. Wrote the author, Malaysk ...

 

[Breach]

Yeah, at first time, must do all steps, carefully, explain as readable at the first page. Wrote the author, Malaysk ...

It looks like it went successfully. I have the Malak mod, Xposed framework, PCV, etc. I just don't have a "Data" section at all in the Partition info, which the directions said should be checked to make sure it changed from 1GB to 2GB. I'm assuming that my model headunit does not supposed to have a Data section, or something is amiss.

 

[JAM07]

Just followed the directions and mine has no "DATA" section either. Did you resolve the issue? Which Joying model are you using?

That's because this FW uses FUSE and it doesn't has separate DATA partition, instead it uses whole internal memory - Internal_SD. So it's OK.

---------- Post added at 10:43 PM ---------- Previous post was at 10:42 PM ----------

BTW, what is PCV? It's some kind of autostart utility? Which options has to be enabled in PCV and why?

 

[Luv-Kush]

I had the same problem so I switched to h2 OS or oxygen OS . They both good and on android 5.1.1

 

[joburgslim]

Does the stock firmware have this codec and work with android auto.

Sent from my SM-N910T using Tapatalk

Hi bsavoir22 and alex1301

I can confirm that the stock Joying firmware does NOT support this. My system is a rk3188 1024x600 and I have tested with stock and Malaysk ROM and both crash identically, and the same way alex1301 described it.

It seems raw H.264 support across many systems including windows is not so good. It looks like the support in android improved in 4.4 but these chinese head units use a stripped version of Android. For example, no lock screen, no multi user support, etc, all standard in 4.4. If Malaysk can find the raw H.264 API from a full 4.4 and integrate it, then it should work, depending on the right h/w integration. I believe my unit is Mali400 GPU.

I would really like to get Mike's Headunit app to run, as I can not get the Easy Connected app to run reliably, no matter what I do.

 

[bsavoir22]

It seems easy connect is hit or miss with the units after a complete reflash. I know the processor supports it and there are tablets that use the mali400 gpu that also support the codec. We'll have to wait and see.

Sent from my SM-N910T using Tapatalk

 

[Breach]

That's because this FW uses FUSE and it doesn't has separate DATA partition, instead it uses whole internal memory - Internal_SD. So it's OK.

I figured it was something like that. Thanks man

 

[iateshaggy]

is there a reason my clock disappeared from the status bar and is there a way to get it back?

 

[nFKT]

Special message for beginners now !! Before experimenting with firmware, Check to make first of all that you can to the factory firmware to get into rekovery standard methods described in the header or in the main posts that lined firmware and if something goes wrong, you will be able to return to their firmware.

800X480and 1024X600 RK3188 and RK3066 March 16, 2016 ​

VIDEO - https://www.youtube.com/watch?v=xum84zDVe5M​

What's new and fixes:
1. Completely reworked the button Reset in the status bar. Now the module is not needed. Reboot menu has its own settings, and you can completely change it (color, language, what items will be displayed, etc.)
Watch screenshots :
View attachment 3685095View attachment 3685096View attachment 3685097View attachment 3685098View attachment 3685099
2. Remade shutter notifications. Now music programs notification is displayed correctly.
It was
View attachment 3685104
It became
View attachment 3685105
3. For a screen resolution of 800X480 redesigned program internet radio - PCRadio
View attachment 3685106View attachment 3685107
4. A new item in Settings - Display -Change font. You can change the system font and its size. The first font - the standard of the firmware (you can always come back to it)
View screenshots:
View attachment 3685115View attachment 3685116View attachment 3685117View attachment 3685118
5. The OEM.apk application added to the application:
Car-Launcher
EasyConnected.HT01.3.3.8-150824
EasyConnected.HT03.4.1.8-160106
MacroDroid
mtcsound_v14_7floor - who reworked the sound of the machine from a 7floor
MX Player
PPP Widget
Torque_v1.8.81(881)
Total_Commander-2.72
YouTube-11.07.59
View attachment 3685133View attachment 3685134View attachment 3685135
6. Other corrections and additions

800X480 RK3188 - https://yadi.sk/d/UH4LEMX3qEzsJ
800X480 RK3066 - https://yadi.sk/d/VfUAR7NpqEmzo
1024X600 RK3188 - https://yadi.sk/d/sno9oCP2qF9uj
1024X600 RK3066 - https://yadi.sk/d/lV5CR9usqEqMq

Thank for helping and testing the firmware with the Russian forum user DUK

Any chance you could post a md5? The rk3188 1024x768 rom is not working. I have downloaded it and extracted it more than once. It isn't detected as a valid update.img file for me. I am using your march 9th release currently.

cheers

 

[hans109h]

is there a reason my clock disappeared from the status bar and is there a way to get it back?

Go to settings, system, clock settings and make sure all the clock appearance settings have values and it's not the same as the background color.

 

[ReshamG]

Thanks good to know.

I can get a cheap non hilink E3372 so might look at that too.

Did u managed to get 4G usb dongle work? Where did buy it from

 

[hans109h]

Malaysk, great update.

Just because a lot of people are asking, once you have a FUSE version of the rom installed update like this:
1. Download new FUSE rom.
2. Unrar the .img file to microSD.
3. Insert card into GPS slot.
4. Navigate to settings, About Machine, System Updates.
5. Do not check box to wipe.
6. Press ok.

System will reboot into recovery and install upgrade, then reboot and you are good to go.

Hans

 

[m4f1050]

Did u managed to get 4G usb dongle work? Where did buy it from

Make sure you go to PPP Widget 1 forum and check which ones are compatible. In the US I am using the E3276-s500 and I cloned the IMEI of the phone I got for free on the modem and I get unlimited 4G LTE. Not sure which one works on UK.

Sent from my SM-N910T using Tapatalk