[ROM][RK3188][HD] Malaysk ROMs for any yet known MTCD-Device

Search This thread

Malaysk

Senior Member
Jan 31, 2011
1,683
5,766
Stitching device, you need to understand all the risks.
Neither I nor the website is not responsible for your actions and possibly killed devices!​
Only for devices MTCD 1024X600 and 800X480 PX3 1GB Android 5.1.1
RK3188!!!
Instructions for connecting the Xposed modules - http://forum.xda-developers.com/showpost.php?p=69295656&postcount=1388

Installing and configuring modules Xposed in pictures
Only for those who have access to recovery (originally trying to get into it and reset key combinations) !!!

++++++++++++++++++++++++++++++++++++++++++++++++++++
If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then click on the "Donate to Me"
++++++++++++++++++++++++++++++++++++++++++++++++++++

Installation: Unzip the archive, burn to the root of the SD card file dupdate.img and insert the card into the SD slot of the device. View recovery and falls on the third item of data cleaning. After installation, go back in and make recovery and Wipe Data (penultimate paragraph)

When you first install will generate an error and go back to the reboot, start flashing again - this is normal (resize partition)
Do not forget to Wipe Data from recovery (penultimate paragraph)

New from May 31, 2016 (1st version)
Base on 05/05/2016
Integrated Root
Firmware FUSE (all memory is internally connected into one - turned out 13.5 GB) - for advice and assistance thank SW. booroondook
Remove debris (Chinese keyboard, Maps, etc.)
Added Program - ES File Explorer , TitaniumBackup
Three launcher to choose from (Settings - Desk)
Other ...
New from June 2, 2016 (2 version)
A new item in Settings - System (here all the new items are added)
- Date and time in the status bar
- Screen Density
- Sidebar with programs
- The rate of incoming and outgoing Internet in the status bar
- Change the font and size of the system
- Lock all advertising from the Internet
Settings for the developer immediately appear in Settings
It changed the appearance of the equalizer
Reworked Radio App
Changed all the status bar
Added reboot and reset button in the status bar in rekaveri
and much more
New from June 6, 2016 (3 version)
Fixed the status bar appearing when changing the system language.
Optimizations and fixes for 800X480 resolution screen (evading problems, I do not have such a device)
graphic change factory settings
New Settings - System - The gradient of the status bar (see the screenshots)
The OEM application is a set of programs, the factory program and new themes of regular applications. Install the application as normal. Removal - go to Settings - Applications - Remove the update.
KingoRoot replaced by SuperSU (hidden Root access)
The shutter notification added Dimmer
Many more ......
New from June 27, 2016 (4 version)
Android base on June 21, 2016 (JY)
New Radio, Music, Video (three different color themes) - The other applications are OEM app.
add Settings - Airplane Mode, Mobile Data, Configure APN
New Settings - System - Autostarts
New Settings - Display - Heads-up notifications
New Settings - Partition info
Changed Status Bar
Updated Google, Google Services, Play Store
Change the permissions for programs that are now available to all applications in the Play Store
Altered applications and ?anbas app for screen resolution 800X480
The OEM application is a set of programs, the factory program and new themes of regular applications. Install the application as normal. Removal - go to Settings - Applications - Remove the update.
Do not forget - you can change the Launcher in the Settings - Home
Many more ...
P.S.: The application OEM is added to the program Mtcservice, where you can change the serial number on the 12 - digit to start the program TomTomGo. It is necessary then to activate the module Mtcservice in Xposed!!!
New from September 16, 2016 (6.5 version)
1. Fixed the choice for a navigation app. Now after selecting a program, it will be immediately started.
2. All additional programs and launchers can now be removed by standard methods in Settings - Applications.
3. In the status bar adds a new icon (the moon) to start Skrinsever. Customize it possible to program ScrinseverClock (the clock itself, color, size, weather display, etc.)
4. Module for Xposed MalayskStatusBar removed.
5. Xposed Run now in the Settings.
7. New: Settings - Sidebar
9. launchers updated to the latest versions.
10. Added the latest jetAudio peredelany me completely. (Can be removed in the Settings - Applications)
11. Removed hidden Root access and have the latest SuperSU (some programs incorrectly worked with hidden as root)
12. Fixed replacing the system font in Settings - System - Select the font.
13. Fixed setup notifications in Settings - Display.
14. Settings Network Card reappeared.
15. Added support Init.d
16. i2cset added a binary file for the sound
17. In the folder system / etc / init.d already in configuration file to change the sound (enabled by default i2cset -y 4 0x1A 0x25 0x01 and i2cset -y 4 0x1A 0x2C 0x60) (permission from him after the change must be 0755)
17. Other.
NEW dated October 16, 2016. Firmware ?7.5
+ Fixed speed work by GPS widget
+ Fixed 3G modems
+ Added support of 7floor direct control of sound (in the OEM application has mtcsound_7floor.apk, will need to install and remove the Root Explorer file 33i2cset program in the system folder \ etc \ init.d)
+ Added the application Radio, Music, Bluetooth, DVD from SW. AlexNikolaev with permission to OEM application.
+ Added launcher KLD.
+ Added Weather Screensaver, Radio, Music. Configure the weather is - Settings - Settings Weather.
+ Other fixes.
NEW October 24, 2016. Firmware 8
Android base of 27 September JY
Fixed XposedVolumeBar module
Added new module for Xposed mtc-music (with the settings do not forget to copy the folder from the archive with the firmware and activate the module in Xposed)
In Copy_TO_SD_External folder (GPS Card) - From KM - are the folders to display the speed in kilometers per hour
In Copy_TO_SD_External folder (GPS Card) - From MPH - are the folders to display the speed in MPH (American format)
Added different skrinsevery in OEM application (analog and digital)
Setting display Weather in skrinsever - Settings - Settings Weather.
Many other additions and fixes.
NEW of 18 December 2016. Firmware 9
1. Android base on November 22, 2016
2. Fixed Google Play
3. Now all folders with configuration files .ini (mtc-launcher, mtc-music, mtc-statusbar) need to copy the program ES File Explorer (there are in the firmware) in the internal memory internal_sd !!!
It made specifically for devices that do not have SD Card (GPS Card)
5. Added fully working module for Xposed - mtc-keys (to change the button assignments on the unit)
Setting .ini file with a folder mtc-keys it must be located on the outside of the SD card external_sd !!!
The archive with the firmware is an example configuration file, where you double-click the double-click the Back button will start PCRadio (you need it in the section [click.2] to delete the # sign).
Read more about the settings here - http://4pda.ru/forum/index.php?showtopic=704299&st=0#entry39969383
6. Added new version of Radio, Music, Video.
7. added to OEM application launchers and the app (many versions) and Fixed Music application.
8. Added MtcdTools application to configure the keys on the device.
9. change the factory settings for normal display in 1024x600 resolution.
10. Fixed clock in a sliding curtain.
11. The latest version of ROOT access.
12. A great number of other fixes and additions.
NEW of January 15-18, 2017. Firmware №9.6 and №9.7
+ Android base from December 22, 2016
+ Added new staff in OEM applications app in red tones and skrinsever without display GPS speed
+ Many other fixes and additions
Download version 9.6 : https://yadi.sk/d/qjyZdCLA39Astm
+ Changed the sound (except radio) (added on bass and treble) If the sound does not like it, then delete the file \system\etc\int.d\33i2cset
+ Fixed new applications for permission screen 800X480
+ Reworked MTCBlueTooth application - contacts in two lines and color theme of two types - red (found in OEM application), and blue (default)
Download version 9.7 with the modified sound (added on bass and treble): https://yadi.sk/d/0jZmPIbi39bJUX
NEW 29 January 2017. Firmware №10
Fixed bug WiFi Direct
Altered regular application - 3 color themes to choose from (blue dotted, red, green) default blue, the rest of the install OEM applications.
Reworked all the screen savers to display tags and pictures. Weather is also moved upward.
Added display of prognosis in Radio application. Configure or disable can Settings - Weather Settings - Weather on the screen. .. You can change the color, the icons, the size, etc. Reliable Display automatically by GPS and the Internet (it is necessary to include the settings -GPS -Location - On for all sources, or ask the city in the manual mode. Selecting display Prognosis for two providers.
Added module to Xposed, to display tags in screensaver - xposed-mtc-poweramp
Added module to Xposed, to display information from PCRadio in screensaver - xposed-mtc-pcradio
Added module to Xposed, for Bluetooth applications - xposed-mtc-bt-1.5 - read about it here
Shortcut settings are mtc-bt/mtc-bt.ini file where you do need to register telephone numbers.
IMPORTANT: If you synchronize your phonebook with your phone - Always unplug mtc-bt Xposed module and reboot. After synchronization, turn it on again! Otherwise, synchronization will not be!
Added module for Xposed - xposed-mtc-manager - read about it here
The archive with the firmware are examples of the settings in the mtc-manager folder. So if you copy to a GPS map mtc-manager folder with the file settings.ini the default screensaver will be launched in all applications (not just full-time) in 300 seconds, here are the settings:
Code:
# Including alternative screensaver, when you specify false will work full-time mechanism:
screenClock = true
# Time the screen is turned off, if not specified will use the value of the full-time settings in seconds:
screenTimeout = 300

If you want to turn it off completely, then prescribes: screenClock = false
If you want that it does not run in certain applications, it prescribes the package names in the settings file ss_exceptions.ini
Code:
com.microntek.avin
com.microntek.media
com.android.browser
Added module for Xposed - xposed-mtc-music-2.8 - read about it here
For turning off the screensaver by clicking on the moon in the status bar so we prescribe in the mtc-music file/mtc-music.ini
Code:
# Turn off the screensaver only when you touch the screen. true - yes, false - normal mode of operation.

touch_mode = true
So many the other - much to write.
Download version 10 with the modified sound (added on bass and treble): https://yadi.sk/d/3-ajQr753BWxav

VIDEO: https://www.youtube.com/watch?v=DvgrdKBfi2U
NEW 21 Febuary 2017. Firmware №10.8
+ Android base on February 9, 2017
+ Updated Google Services
+ Added three new themes of regular applications, red, green, blue - with quick access panel
(Default is blue theme - the other is in the OEM application)
+ Removed Xposed module - Status bar (if you install the firmware update (without Wipe date)
it then go to Settings - Applications and there remove the status bar module)
+ Added new settings. Now you can fully customize the icons in the status bar.
They are located in Settings - Display.
+ Added a new screensaver with quick access panel (can be directly run regular applications)
+ ViperFX
+ Many other additions and bug fixes
Do not forget to set in Settings - GPS - Location - According to all sources !!!
If you do not like the sound of the system - Remove Root Explorer-om file in the system\etc\init.d\33i2cset
Download version 10.8 with the modified sound (added on bass and treble): https://yadi.sk/d/IUXt0orh3ELHtS
NEW 10 april, 2017. Firmware №11
Be sure to install this firmware with erasure of data (or make Wipe Data in Recovery after installing the firmware)
Optimization of the whole system (brakes almost did not become)
Added a new Xposed module mtc-radio, to display the names of radio stations. The setup file is located in the folder mtc-radio/mtc-radio.ini which needs to be copied to the internal memory internal_sd (is in the archive together with the firmware)
It is necessary to prescribe the frequencies of your radio stations in the mtc-radio.ini file in your city (information can be found on the Internet)
And be sure to turn off the display of RDS in Settings - Factory Settings - Other !!!
Example of the settings in the file mtc-radio.ini

# Required for the module to be disabled in Settings - Factory Settings - Other - Show RDS !!!
[controls]
# radio stations show names in the header RDS
title=true
# show short names on the radio stations buttons
# Show pop-up notifications when the app is not active Radio. default false
toast=true
# Font size pop-up notifications
toast.size=22

[title]
# Names of the stations to display information in the RDS field
91.00=Radio 7
91.50=TOK FM
92.10=Radio May
95.70=Xumor FM
96.30=Ket
98.60=Radio Retro
99.10=Ola-la
99.90=Europa Plus
100.30=Russian Radio
101.00=Chanson
101.50=Рекорд
102.10=Радио Дача
102.50=Радио Energy
102.70=Радио Ваня
102.90=Радио DFM
103.60=Мегаполис
104.30=Самара Максимум
104.80=Autoradio
105.40=Romantika
106.10=Дорожное Радио
106.60=Love Радио
107.20=Child Radio

[buttons]
# Short names for display stations in buttons
91.00=Радио 7
91.50=ТОК FM
92.10=Радио Маяк
95.70=Юмор FM
96.30=КОТ
98.60=Ретро
99.10=Эхо Москвы
99.90=Европа Плюс
100.30=Русское Радио
101.00=Шансон
101.50=Рекорд
102.10=Дача
102.50=Energy
102.70=Радио Ваня
102.90=DFM
103.60=Мегаполис
104.30=Самара Максимум
104.80=Autoradio
105.40=Romantika
106.10=Дорожное Радио
106.60=Love Радио
107.20=Child Radio

[memory]
# radio stations recovery after pressing the RESET button
# FM1
P1.1=106.60
P1.2=101.50
P1.3=102.50
P1.4=102.90
P1.5=99.90
P1.6=96.30
P2.1=100.30
P2.2=104.80
P2.3=106.10
P2.4=105.40
P2.5=104.30
P2.6=102.10
P3.1=102.10
P3.2=104.80
P3.3=106.10
P3.4=105.40
P3.5=104.30
P3.6=102.10

Added 2 and 3 minutes to Settings - Screen - Screen saver time
Do not forget: If after installing the firmware you do not see anything in the StatusBar - go to Settings - Display - Bar Status Settings and turn on the icons there.
Many other additions, updates, fixes.
Download version 11 with the modified sound (added on bass and treble): https://yadi.sk/d/8vwE8PLJ3GoA2M

New from 13 april, 2017 for RK3188 800X480 and 1024X600 MTCD Firmware №11.1

Google services are replaced with MicroG (recommended - install this firmware with erasure of data
(Or make Wipe Data in recovery after installing the firmware)
1. go into the microG Settings application and activate the background services:
- Registering your device with Google
- Google Cloud Messaging
2. In the same place, select the UnifiedNlp settings and note (if you only use GPS, you can skip it):
- location programs (just select one that is more like it), so that the search for networks
- address search programs - mark Nominatim with a daw (conversion of coordinates to address)
3. reboot the device
4. Go to the Play Market and enter your account.
We use.

Download version 11.1 with MicroG : https://yadi.sk/d/LgE6zhfR3GvHgf
New from 18 april, 2017 for RK3188 800X480 and 1024X600 MTCD Firmware №11.4
Added four versions of Launcher:
1. Launcher with GPS speed and Weather (main)
2. Launcher with GPS speed and WITHOUT showing weather (change launcher in Settings - Desktop)
3. Launcher without GPS speed and with analog clock (change launcher in Settings - Desktop)
4. Launcher without GPS speed and with a digital clock (change launcher in Settings - Desktop)
Added a set of full-time programs without showing the top panel and without the weather. (Located in the OEM application)
The gps-launcher module was redesigned to display the speed in the two launchers.
Other fixes and additions.
Download version 11.4 with MicroG : https://yadi.sk/d/rRVYL92R3H6wdJ
If you like my firmware, and you think that I am not wasted a lot of time to create the firmware and you want me to continue to work on firmware, you can thank me or Donate To Me
IMPORTANT: If you synchronize your phonebook with your phone - Always unplug mtc-bt Xposed module and reboot. After synchronization, turn it on again! Otherwise, synchronization will not be!

New from April 25, 2017 for the RK3188 800X480 and 1024X600 MTCD Firmware №11.5

1. Fixed Launcher with GPS speed and WITHOUT showing Weather in the screen resolution 800X480
2. Now all programs are available on Google Play without exceptions (including TomTom)
3. Fixed widget for Radio application in Launchers with analog clock and digital clock
4. TomTom navigation immediately works and downloads maps.
5. Reduced the height of the Bar Status.
6. At the first boot after flashing, there are now icons in the status bar.
Two versions of the firmware with MicroG services and the official version of Google Service.
Download the version with the official Google Market: https://yadi.sk/d/HYOsUi1F3HJ9Y5
Download version from MicroG: https://yadi.sk/d/LXl9hJoy3HKZmJ

New from September 07, 2017 for the RK3188 800X480 and 1024X600 MTCD Firmware №12.6

1. Android base from August 9, 2017 (factory firmware HA)
2. Updated all Google Services
3. The latest version of SuperSU (hidden Root access)
4. New PCRadio with a new module for Xposed from the uv. MVG-V70 (now when running regular programs, the sound of PCRadio is turned off)
5. New screensaver 2 in 1. With analog and digital clock. Change screen - press it for 2-3 seconds.
6. In the startup settings of the screensaver, the autorun time is added Never-15-30-60 seconds-2-3-5-7-10 minutes
7. New Radio with a quick access panel (installed) and without a panel (enclosed in the OEM application)
8. The ViperFX start button and track numbers with the quick access panel (installed) and without the panel (located in the OEM application) are added to the Music application.
To make ViperFX work correctly when the Music application is running, disable the graphic equalizer there.
9. Added a new module for Xposed mtc-bt version 2.3 (on the previous firmware was version 1.5)
If after synchronization of contacts with the phone you have nothing appeared, just exit the Bluetooth application (for example, with the Back key) and go back to it, all contacts will appear. Now you do not need to disable the module in Xposed.
And do not forget to edit the file mtc-bt.ini (lies in the archive along with the firmware) and register the phones for quick access there.
10. Added a new module for Xposed xposed-mtc-manager version 2.5 (on the previous firmware was version 1.13)
Read about his settings here
Copy the folder mtc-manager to an external memory card (GPS card) external_sd - everything is in the archive with the firmware, just edit the setup files for yourself in the program Notepad ++
Now you can connect any OBD adapters with different names, prescribe them in the settings.ini file.
We do not forget who does not need the launch of the screensaver, then we disable not only the Android settings but also the settings.ini file in the mtc-manager folder - screenClock = false
Code:
# inclusion of an alternative screensaver, if you specify false, the standard mechanism will work:
screenClock=false
# the time to turn off the screen, if not set, the value from the default settings will be used:
screenTimeout=260
# name of the program of the screensaver
screenPackage=com.microntek.screenclock
# activation screen saver name
screenClass=MainActivity
The sound is restored (high and low frequencies are raised). If you do not like the sound in the system - Delete the Root Explorer file in the system\ etc\init.d\33i2cset
The work of init.d is restored
Other additions and fixes.

The firmware must be installed with the removal of all data (Wipe Data) !!!!

Do not forget to copy the folders gps-launcher, mtc-launcher, mtc-music, mtc-radio to the root internal memory internal_sd, and folder mtc-manager to the root of the external card external_sd and activate the modules in Xposed.
Version with the official Google Market:
Download the version with the official Google Market: https://yadi.sk/d/bBIUME4_3Mft2r
Version with MicroG:
Download version from MicroG: https://yadi.sk/d/ZZJ2vX0e3MftdK

New from July 09, 2018 for the RK3188 800X480 and 1024X600 MTCD Firmware № 13

1. New versions of Music - are in the OEM application.
2. In Settings, the item Lock screen is added.
3. New screensavers with a graphic equalizer (located in the OEM application)
4. New PCRadio - in a transparent style from the uv. DUK.
5. New screensaver 2 in 1. With analog and digital clock. Change the screen - click on it for 2-3 seconds. (installed by default)
6. New Radio with a quick access panel (installed) and without a panel (enclosed in the OEM application)
7. The Music button is added to the Music application with the option of selecting a graphic equalizer with a quick access panel (installed) and without a panel (in the OEM application)
8. Correct reboot (including MCU) of the device from the StatusBar (many thanks sva4pda for the help)
9. The volume of the bell is reduced.
10. In the application OEM added Live Wallpaper - Planets (you can try to install them, cool will look in the transparent versions of the Screensaver, Music and Radio :))
11. Other additions and corrections.

The firmware must be installed with the removal of all data (Wipe Data) !!!!

Do not forget to copy the folders mtc-launcher, mtc-music, mtc-radio to the root internal memory internal_sd, leave other folders on external SD (external_sd) and activate modules in Xposed.
Version with the official Google Market:
Download the version with the official Google Market: https://yadi.sk/d/S-HQ3I9N3YxRgj
Version with MicroG:
Download version from MicroG: https://yadi.sk/d/uJPHkAKB3YxRkG

If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then click on the "Donate to Me"
-------------------------------------------------------------------------
Examples of writing in Settings - Date & Time - Custom JAVA format for display in the status bar.

examples:

dd.MM.yyyy - 17.04.2016
dd / MM / yyyy - 17/04/2016
dd MMMM yyyy - April 17, 2016
dd MMMM - April 17
EEEE, dd MMMM - Tuesday, April 17
HH: mm: ss - 20:33:30
K: mm a - 4:45 PM

date

D (day of the year) - 199

E / EE / EEE (day of the week) - W
EEEE (day of the week) - Tuesday
EEEEE (day of the week) - In

F (day of the week in the month) - 2 (2nd week of July)
FF (day of the week in the month) - 02 (2nd week of July)

G (era) - NE

L (Autonomous month) - 1
LL (Autonomous month) - 01
LLL (Autonomous month) - January
LLLL (Autonomous month) - January
LLLLL (Autonomous month) - I

M (months in a year) - 1
MM (months in a year) - 01
MMM (months in a year) - January
MMMM (months in a year) - January
MMMMM (months in a year) - I

W (weeks to months) - 2
WW (weeks to months) - 02

c / cc / ccc (Autonomous day of the week) - W
cccc (Autonomous day of the week) - Tuesday
ccccc (Autonomous day of the week) - In

d (days per month) - 1
dd (in the month) - 01

w (weeks in a year) - 9
ww (weeks of the year) - 09

yy (year) - 16
y / yyy / yyyy (year) - 2016

Time

H (hours a day: 24) - 3
HH (hours a day: 24) - 03

K (hours am / pm: 12) - 1
K (hours am / pm: 12) - 01

S (milliseconds) - 700

h (hours am / pm: 12) - 3
hh (am / pm hours: 12) - 03

k (hours per day: 24) - 7
kk (hours per day: 24) - 07

m (minutes per hour) - 5
mm (minutes per hour) - 05

s (seconds to minutes) - 5
ss (seconds in a minute) - 05

a (am / pm marker) - PM

z / zz / zzz (time zone) - STV
zzzz (time zone) - Pacific Standard Time

Z / ZZ / ZZZ (time zone RFC 822) - 0800
ZZZZ (time zone RFC 822) GMT-08: 00
ZZZZZ (time zone RFC 822) - 8:00

'(The escape character to the text) -'Date ='

'' (Quote) - 'o''clock'




+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 

Attachments

  • Screenshot_2016-06-06-21-40-54.png
    Screenshot_2016-06-06-21-40-54.png
    241 KB · Views: 50,657
  • Screenshot_2016-06-06-17-14-23.jpg
    Screenshot_2016-06-06-17-14-23.jpg
    54.1 KB · Views: 51,498
  • Screenshot_2016-06-26-14-58-05.png
    Screenshot_2016-06-26-14-58-05.png
    234.9 KB · Views: 47,538
  • Screenshot_2016-06-24-21-11-17.png
    Screenshot_2016-06-24-21-11-17.png
    243.7 KB · Views: 44,667
  • Screenshot_2016-06-24-21-12-03.png
    Screenshot_2016-06-24-21-12-03.png
    242.3 KB · Views: 43,245
  • Screenshot_2017-01-15-18-40-17.png
    Screenshot_2017-01-15-18-40-17.png
    234.5 KB · Views: 32,493
  • Screenshot_2017-01-15-18-34-18.jpg
    Screenshot_2017-01-15-18-34-18.jpg
    37.2 KB · Views: 31,427
  • Screenshot_2017-01-18-10-27-19.png
    Screenshot_2017-01-18-10-27-19.png
    126.4 KB · Views: 30,480
  • Screenshot_2017-01-18-10-29-04.png
    Screenshot_2017-01-18-10-29-04.png
    125.8 KB · Views: 29,342
  • Screenshot_2017-01-18-10-30-22.png
    Screenshot_2017-01-18-10-30-22.png
    123.3 KB · Views: 28,868
  • Screenshot_2017-01-18-10-30-56.png
    Screenshot_2017-01-18-10-30-56.png
    126.2 KB · Views: 28,523
  • Screenshot_2017-02-20-13-26-40.png
    Screenshot_2017-02-20-13-26-40.png
    86 KB · Views: 26,330
  • Screenshot_2017-02-20-14-08-51.png
    Screenshot_2017-02-20-14-08-51.png
    186.7 KB · Views: 29,551
  • Screenshot_2017-02-19-17-04-32.jpg
    Screenshot_2017-02-19-17-04-32.jpg
    78.7 KB · Views: 29,164
  • Screenshot_2017-04-09-17-57-20.jpg
    Screenshot_2017-04-09-17-57-20.jpg
    68 KB · Views: 24,580
  • Screenshot_2017-04-09-13-17-39.jpg
    Screenshot_2017-04-09-13-17-39.jpg
    70.4 KB · Views: 22,930
  • Screenshot_2017-04-09-13-16-31.jpg
    Screenshot_2017-04-09-13-16-31.jpg
    52.5 KB · Views: 22,687
  • Screenshot_2017-04-09-13-14-35.jpg
    Screenshot_2017-04-09-13-14-35.jpg
    61 KB · Views: 21,957
  • Screenshot_2017-04-09-13-12-24.png
    Screenshot_2017-04-09-13-12-24.png
    174.1 KB · Views: 21,027
  • Screenshot_2017-04-09-13-12-30.png
    Screenshot_2017-04-09-13-12-30.png
    248.9 KB · Views: 21,085
Last edited:

da_anton

Senior Member
Sep 18, 2011
112
60
Munich
Where can I donate?

Just received my Xtrons HU yesterday. Software quality is really horrible. Probably the worst Android device I ever had. Really looking forward to a custom ROM and hopefully it supports my GS version.
@Malaysk: were can I donate to support your effort? Couldn't find your donate button so far. :angel:
 

sterod

Senior Member
Aug 27, 2012
394
110
Toronto
Just received my Xtrons HU yesterday. Software quality is really horrible. Probably the worst Android device I ever had. Really looking forward to a custom ROM and hopefully it supports my GS version.

@Malaysk: were can I donate to support your effort? Couldn't find your donate button so far. :angel:

Click on his username in any post, and you will see a "$ Donate to me" option in the dropdown menu that pops up.
 

sterod

Senior Member
Aug 27, 2012
394
110
Toronto
@Malaysk - Can you tell me if your ROM fixes the "bluetooth off" bug? If you can take a look at this thread, it explains that the May 4th ROM fixed the issue (which yours is based on, I think) but that by applying root to it with Kinga Root, it breaks the Bluetooth again and the problem returns.

http://forum.xda-developers.com/and...uestions-development/bluetooth-buggy-t3389500

I am very happy to have donated to this cause! I had no idea you would push a ROM out so fast!
 

Malaysk

Senior Member
Jan 31, 2011
1,683
5,766
@Malaysk - Can you tell me if your ROM fixes the "bluetooth off" bug? If you can take a look at this thread, it explains that the May 4th ROM fixed the issue (which yours is based on, I think) but that by applying root to it with Kinga Root, it breaks the Bluetooth again and the problem returns.

http://forum.xda-developers.com/and...uestions-development/bluetooth-buggy-t3389500

I am very happy to have donated to this cause! I had no idea you would push a ROM out so fast!

I removed the program KingoRoot and made his to rott access , I would think, I have only one unit per day )))
 

sterod

Senior Member
Aug 27, 2012
394
110
Toronto
I'm installing it right now and will post my findings.

---------- Post added at 08:47 AM ---------- Previous post was at 08:03 AM ----------

The installation went smoothly but unfortunately the "Bluetooth Off" bug is still there.

7a80d80238a3b14d3e0f5a84dedd20d5.jpg
 
  • Like
Reactions: doctorman

sterod

Senior Member
Aug 27, 2012
394
110
Toronto
Same here. I don't know if what the other user posted is true, that the May 4th ROM fixes it and that rooting that ROM breaks it again. I tried running SuperSU me to replace Kingo with SuperSU but the problem remains.
 

Malaysk

Senior Member
Jan 31, 2011
1,683
5,766
I'm installing it right now and will post my findings.

---------- Post added at 08:47 AM ---------- Previous post was at 08:03 AM ----------

The installation went smoothly but unfortunately the "Bluetooth Off" bug is still there.
I'll be watching this issue.
Tell me in detail where the problem? I took my phone and I have all united and all the phone book copied and running?
 
Last edited:
  • Like
Reactions: sterod

sterod

Senior Member
Aug 27, 2012
394
110
Toronto
Thanks! Maybe we could start a request section for your rom? The other feature I would like is a patch to prevent the head unit from momentarily shutting down when the accessory power is switched.
 

sterod

Senior Member
Aug 27, 2012
394
110
Toronto
  • Like
Reactions: doctorman

Top Liked Posts

  • There are no posts matching your filters.
  • 99
    Stitching device, you need to understand all the risks.
    Neither I nor the website is not responsible for your actions and possibly killed devices!​
    Only for devices MTCD 1024X600 and 800X480 PX3 1GB Android 5.1.1
    RK3188!!!
    Instructions for connecting the Xposed modules - http://forum.xda-developers.com/showpost.php?p=69295656&postcount=1388

    Installing and configuring modules Xposed in pictures
    Only for those who have access to recovery (originally trying to get into it and reset key combinations) !!!

    ++++++++++++++++++++++++++++++++++++++++++++++++++++
    If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then click on the "Donate to Me"
    ++++++++++++++++++++++++++++++++++++++++++++++++++++

    Installation: Unzip the archive, burn to the root of the SD card file dupdate.img and insert the card into the SD slot of the device. View recovery and falls on the third item of data cleaning. After installation, go back in and make recovery and Wipe Data (penultimate paragraph)

    When you first install will generate an error and go back to the reboot, start flashing again - this is normal (resize partition)
    Do not forget to Wipe Data from recovery (penultimate paragraph)

    New from May 31, 2016 (1st version)
    Base on 05/05/2016
    Integrated Root
    Firmware FUSE (all memory is internally connected into one - turned out 13.5 GB) - for advice and assistance thank SW. booroondook
    Remove debris (Chinese keyboard, Maps, etc.)
    Added Program - ES File Explorer , TitaniumBackup
    Three launcher to choose from (Settings - Desk)
    Other ...
    New from June 2, 2016 (2 version)
    A new item in Settings - System (here all the new items are added)
    - Date and time in the status bar
    - Screen Density
    - Sidebar with programs
    - The rate of incoming and outgoing Internet in the status bar
    - Change the font and size of the system
    - Lock all advertising from the Internet
    Settings for the developer immediately appear in Settings
    It changed the appearance of the equalizer
    Reworked Radio App
    Changed all the status bar
    Added reboot and reset button in the status bar in rekaveri
    and much more
    New from June 6, 2016 (3 version)
    Fixed the status bar appearing when changing the system language.
    Optimizations and fixes for 800X480 resolution screen (evading problems, I do not have such a device)
    graphic change factory settings
    New Settings - System - The gradient of the status bar (see the screenshots)
    The OEM application is a set of programs, the factory program and new themes of regular applications. Install the application as normal. Removal - go to Settings - Applications - Remove the update.
    KingoRoot replaced by SuperSU (hidden Root access)
    The shutter notification added Dimmer
    Many more ......
    New from June 27, 2016 (4 version)
    Android base on June 21, 2016 (JY)
    New Radio, Music, Video (three different color themes) - The other applications are OEM app.
    add Settings - Airplane Mode, Mobile Data, Configure APN
    New Settings - System - Autostarts
    New Settings - Display - Heads-up notifications
    New Settings - Partition info
    Changed Status Bar
    Updated Google, Google Services, Play Store
    Change the permissions for programs that are now available to all applications in the Play Store
    Altered applications and ?anbas app for screen resolution 800X480
    The OEM application is a set of programs, the factory program and new themes of regular applications. Install the application as normal. Removal - go to Settings - Applications - Remove the update.
    Do not forget - you can change the Launcher in the Settings - Home
    Many more ...
    P.S.: The application OEM is added to the program Mtcservice, where you can change the serial number on the 12 - digit to start the program TomTomGo. It is necessary then to activate the module Mtcservice in Xposed!!!
    New from September 16, 2016 (6.5 version)
    1. Fixed the choice for a navigation app. Now after selecting a program, it will be immediately started.
    2. All additional programs and launchers can now be removed by standard methods in Settings - Applications.
    3. In the status bar adds a new icon (the moon) to start Skrinsever. Customize it possible to program ScrinseverClock (the clock itself, color, size, weather display, etc.)
    4. Module for Xposed MalayskStatusBar removed.
    5. Xposed Run now in the Settings.
    7. New: Settings - Sidebar
    9. launchers updated to the latest versions.
    10. Added the latest jetAudio peredelany me completely. (Can be removed in the Settings - Applications)
    11. Removed hidden Root access and have the latest SuperSU (some programs incorrectly worked with hidden as root)
    12. Fixed replacing the system font in Settings - System - Select the font.
    13. Fixed setup notifications in Settings - Display.
    14. Settings Network Card reappeared.
    15. Added support Init.d
    16. i2cset added a binary file for the sound
    17. In the folder system / etc / init.d already in configuration file to change the sound (enabled by default i2cset -y 4 0x1A 0x25 0x01 and i2cset -y 4 0x1A 0x2C 0x60) (permission from him after the change must be 0755)
    17. Other.
    NEW dated October 16, 2016. Firmware ?7.5
    + Fixed speed work by GPS widget
    + Fixed 3G modems
    + Added support of 7floor direct control of sound (in the OEM application has mtcsound_7floor.apk, will need to install and remove the Root Explorer file 33i2cset program in the system folder \ etc \ init.d)
    + Added the application Radio, Music, Bluetooth, DVD from SW. AlexNikolaev with permission to OEM application.
    + Added launcher KLD.
    + Added Weather Screensaver, Radio, Music. Configure the weather is - Settings - Settings Weather.
    + Other fixes.
    NEW October 24, 2016. Firmware 8
    Android base of 27 September JY
    Fixed XposedVolumeBar module
    Added new module for Xposed mtc-music (with the settings do not forget to copy the folder from the archive with the firmware and activate the module in Xposed)
    In Copy_TO_SD_External folder (GPS Card) - From KM - are the folders to display the speed in kilometers per hour
    In Copy_TO_SD_External folder (GPS Card) - From MPH - are the folders to display the speed in MPH (American format)
    Added different skrinsevery in OEM application (analog and digital)
    Setting display Weather in skrinsever - Settings - Settings Weather.
    Many other additions and fixes.
    NEW of 18 December 2016. Firmware 9
    1. Android base on November 22, 2016
    2. Fixed Google Play
    3. Now all folders with configuration files .ini (mtc-launcher, mtc-music, mtc-statusbar) need to copy the program ES File Explorer (there are in the firmware) in the internal memory internal_sd !!!
    It made specifically for devices that do not have SD Card (GPS Card)
    5. Added fully working module for Xposed - mtc-keys (to change the button assignments on the unit)
    Setting .ini file with a folder mtc-keys it must be located on the outside of the SD card external_sd !!!
    The archive with the firmware is an example configuration file, where you double-click the double-click the Back button will start PCRadio (you need it in the section [click.2] to delete the # sign).
    Read more about the settings here - http://4pda.ru/forum/index.php?showtopic=704299&st=0#entry39969383
    6. Added new version of Radio, Music, Video.
    7. added to OEM application launchers and the app (many versions) and Fixed Music application.
    8. Added MtcdTools application to configure the keys on the device.
    9. change the factory settings for normal display in 1024x600 resolution.
    10. Fixed clock in a sliding curtain.
    11. The latest version of ROOT access.
    12. A great number of other fixes and additions.
    NEW of January 15-18, 2017. Firmware №9.6 and №9.7
    + Android base from December 22, 2016
    + Added new staff in OEM applications app in red tones and skrinsever without display GPS speed
    + Many other fixes and additions
    Download version 9.6 : https://yadi.sk/d/qjyZdCLA39Astm
    + Changed the sound (except radio) (added on bass and treble) If the sound does not like it, then delete the file \system\etc\int.d\33i2cset
    + Fixed new applications for permission screen 800X480
    + Reworked MTCBlueTooth application - contacts in two lines and color theme of two types - red (found in OEM application), and blue (default)
    Download version 9.7 with the modified sound (added on bass and treble): https://yadi.sk/d/0jZmPIbi39bJUX
    NEW 29 January 2017. Firmware №10
    Fixed bug WiFi Direct
    Altered regular application - 3 color themes to choose from (blue dotted, red, green) default blue, the rest of the install OEM applications.
    Reworked all the screen savers to display tags and pictures. Weather is also moved upward.
    Added display of prognosis in Radio application. Configure or disable can Settings - Weather Settings - Weather on the screen. .. You can change the color, the icons, the size, etc. Reliable Display automatically by GPS and the Internet (it is necessary to include the settings -GPS -Location - On for all sources, or ask the city in the manual mode. Selecting display Prognosis for two providers.
    Added module to Xposed, to display tags in screensaver - xposed-mtc-poweramp
    Added module to Xposed, to display information from PCRadio in screensaver - xposed-mtc-pcradio
    Added module to Xposed, for Bluetooth applications - xposed-mtc-bt-1.5 - read about it here
    Shortcut settings are mtc-bt/mtc-bt.ini file where you do need to register telephone numbers.
    IMPORTANT: If you synchronize your phonebook with your phone - Always unplug mtc-bt Xposed module and reboot. After synchronization, turn it on again! Otherwise, synchronization will not be!
    Added module for Xposed - xposed-mtc-manager - read about it here
    The archive with the firmware are examples of the settings in the mtc-manager folder. So if you copy to a GPS map mtc-manager folder with the file settings.ini the default screensaver will be launched in all applications (not just full-time) in 300 seconds, here are the settings:
    Code:
    # Including alternative screensaver, when you specify false will work full-time mechanism:
    screenClock = true
    # Time the screen is turned off, if not specified will use the value of the full-time settings in seconds:
    screenTimeout = 300

    If you want to turn it off completely, then prescribes: screenClock = false
    If you want that it does not run in certain applications, it prescribes the package names in the settings file ss_exceptions.ini
    Code:
    com.microntek.avin
    com.microntek.media
    com.android.browser
    Added module for Xposed - xposed-mtc-music-2.8 - read about it here
    For turning off the screensaver by clicking on the moon in the status bar so we prescribe in the mtc-music file/mtc-music.ini
    Code:
    # Turn off the screensaver only when you touch the screen. true - yes, false - normal mode of operation.
    
    touch_mode = true
    So many the other - much to write.
    Download version 10 with the modified sound (added on bass and treble): https://yadi.sk/d/3-ajQr753BWxav

    VIDEO: https://www.youtube.com/watch?v=DvgrdKBfi2U
    NEW 21 Febuary 2017. Firmware №10.8
    + Android base on February 9, 2017
    + Updated Google Services
    + Added three new themes of regular applications, red, green, blue - with quick access panel
    (Default is blue theme - the other is in the OEM application)
    + Removed Xposed module - Status bar (if you install the firmware update (without Wipe date)
    it then go to Settings - Applications and there remove the status bar module)
    + Added new settings. Now you can fully customize the icons in the status bar.
    They are located in Settings - Display.
    + Added a new screensaver with quick access panel (can be directly run regular applications)
    + ViperFX
    + Many other additions and bug fixes
    Do not forget to set in Settings - GPS - Location - According to all sources !!!
    If you do not like the sound of the system - Remove Root Explorer-om file in the system\etc\init.d\33i2cset
    Download version 10.8 with the modified sound (added on bass and treble): https://yadi.sk/d/IUXt0orh3ELHtS
    NEW 10 april, 2017. Firmware №11
    Be sure to install this firmware with erasure of data (or make Wipe Data in Recovery after installing the firmware)
    Optimization of the whole system (brakes almost did not become)
    Added a new Xposed module mtc-radio, to display the names of radio stations. The setup file is located in the folder mtc-radio/mtc-radio.ini which needs to be copied to the internal memory internal_sd (is in the archive together with the firmware)
    It is necessary to prescribe the frequencies of your radio stations in the mtc-radio.ini file in your city (information can be found on the Internet)
    And be sure to turn off the display of RDS in Settings - Factory Settings - Other !!!
    Example of the settings in the file mtc-radio.ini

    # Required for the module to be disabled in Settings - Factory Settings - Other - Show RDS !!!
    [controls]
    # radio stations show names in the header RDS
    title=true
    # show short names on the radio stations buttons
    # Show pop-up notifications when the app is not active Radio. default false
    toast=true
    # Font size pop-up notifications
    toast.size=22

    [title]
    # Names of the stations to display information in the RDS field
    91.00=Radio 7
    91.50=TOK FM
    92.10=Radio May
    95.70=Xumor FM
    96.30=Ket
    98.60=Radio Retro
    99.10=Ola-la
    99.90=Europa Plus
    100.30=Russian Radio
    101.00=Chanson
    101.50=Рекорд
    102.10=Радио Дача
    102.50=Радио Energy
    102.70=Радио Ваня
    102.90=Радио DFM
    103.60=Мегаполис
    104.30=Самара Максимум
    104.80=Autoradio
    105.40=Romantika
    106.10=Дорожное Радио
    106.60=Love Радио
    107.20=Child Radio

    [buttons]
    # Short names for display stations in buttons
    91.00=Радио 7
    91.50=ТОК FM
    92.10=Радио Маяк
    95.70=Юмор FM
    96.30=КОТ
    98.60=Ретро
    99.10=Эхо Москвы
    99.90=Европа Плюс
    100.30=Русское Радио
    101.00=Шансон
    101.50=Рекорд
    102.10=Дача
    102.50=Energy
    102.70=Радио Ваня
    102.90=DFM
    103.60=Мегаполис
    104.30=Самара Максимум
    104.80=Autoradio
    105.40=Romantika
    106.10=Дорожное Радио
    106.60=Love Радио
    107.20=Child Radio

    [memory]
    # radio stations recovery after pressing the RESET button
    # FM1
    P1.1=106.60
    P1.2=101.50
    P1.3=102.50
    P1.4=102.90
    P1.5=99.90
    P1.6=96.30
    P2.1=100.30
    P2.2=104.80
    P2.3=106.10
    P2.4=105.40
    P2.5=104.30
    P2.6=102.10
    P3.1=102.10
    P3.2=104.80
    P3.3=106.10
    P3.4=105.40
    P3.5=104.30
    P3.6=102.10

    Added 2 and 3 minutes to Settings - Screen - Screen saver time
    Do not forget: If after installing the firmware you do not see anything in the StatusBar - go to Settings - Display - Bar Status Settings and turn on the icons there.
    Many other additions, updates, fixes.
    Download version 11 with the modified sound (added on bass and treble): https://yadi.sk/d/8vwE8PLJ3GoA2M

    New from 13 april, 2017 for RK3188 800X480 and 1024X600 MTCD Firmware №11.1

    Google services are replaced with MicroG (recommended - install this firmware with erasure of data
    (Or make Wipe Data in recovery after installing the firmware)
    1. go into the microG Settings application and activate the background services:
    - Registering your device with Google
    - Google Cloud Messaging
    2. In the same place, select the UnifiedNlp settings and note (if you only use GPS, you can skip it):
    - location programs (just select one that is more like it), so that the search for networks
    - address search programs - mark Nominatim with a daw (conversion of coordinates to address)
    3. reboot the device
    4. Go to the Play Market and enter your account.
    We use.

    Download version 11.1 with MicroG : https://yadi.sk/d/LgE6zhfR3GvHgf
    New from 18 april, 2017 for RK3188 800X480 and 1024X600 MTCD Firmware №11.4
    Added four versions of Launcher:
    1. Launcher with GPS speed and Weather (main)
    2. Launcher with GPS speed and WITHOUT showing weather (change launcher in Settings - Desktop)
    3. Launcher without GPS speed and with analog clock (change launcher in Settings - Desktop)
    4. Launcher without GPS speed and with a digital clock (change launcher in Settings - Desktop)
    Added a set of full-time programs without showing the top panel and without the weather. (Located in the OEM application)
    The gps-launcher module was redesigned to display the speed in the two launchers.
    Other fixes and additions.
    Download version 11.4 with MicroG : https://yadi.sk/d/rRVYL92R3H6wdJ
    If you like my firmware, and you think that I am not wasted a lot of time to create the firmware and you want me to continue to work on firmware, you can thank me or Donate To Me
    IMPORTANT: If you synchronize your phonebook with your phone - Always unplug mtc-bt Xposed module and reboot. After synchronization, turn it on again! Otherwise, synchronization will not be!

    New from April 25, 2017 for the RK3188 800X480 and 1024X600 MTCD Firmware №11.5

    1. Fixed Launcher with GPS speed and WITHOUT showing Weather in the screen resolution 800X480
    2. Now all programs are available on Google Play without exceptions (including TomTom)
    3. Fixed widget for Radio application in Launchers with analog clock and digital clock
    4. TomTom navigation immediately works and downloads maps.
    5. Reduced the height of the Bar Status.
    6. At the first boot after flashing, there are now icons in the status bar.
    Two versions of the firmware with MicroG services and the official version of Google Service.
    Download the version with the official Google Market: https://yadi.sk/d/HYOsUi1F3HJ9Y5
    Download version from MicroG: https://yadi.sk/d/LXl9hJoy3HKZmJ

    New from September 07, 2017 for the RK3188 800X480 and 1024X600 MTCD Firmware №12.6

    1. Android base from August 9, 2017 (factory firmware HA)
    2. Updated all Google Services
    3. The latest version of SuperSU (hidden Root access)
    4. New PCRadio with a new module for Xposed from the uv. MVG-V70 (now when running regular programs, the sound of PCRadio is turned off)
    5. New screensaver 2 in 1. With analog and digital clock. Change screen - press it for 2-3 seconds.
    6. In the startup settings of the screensaver, the autorun time is added Never-15-30-60 seconds-2-3-5-7-10 minutes
    7. New Radio with a quick access panel (installed) and without a panel (enclosed in the OEM application)
    8. The ViperFX start button and track numbers with the quick access panel (installed) and without the panel (located in the OEM application) are added to the Music application.
    To make ViperFX work correctly when the Music application is running, disable the graphic equalizer there.
    9. Added a new module for Xposed mtc-bt version 2.3 (on the previous firmware was version 1.5)
    If after synchronization of contacts with the phone you have nothing appeared, just exit the Bluetooth application (for example, with the Back key) and go back to it, all contacts will appear. Now you do not need to disable the module in Xposed.
    And do not forget to edit the file mtc-bt.ini (lies in the archive along with the firmware) and register the phones for quick access there.
    10. Added a new module for Xposed xposed-mtc-manager version 2.5 (on the previous firmware was version 1.13)
    Read about his settings here
    Copy the folder mtc-manager to an external memory card (GPS card) external_sd - everything is in the archive with the firmware, just edit the setup files for yourself in the program Notepad ++
    Now you can connect any OBD adapters with different names, prescribe them in the settings.ini file.
    We do not forget who does not need the launch of the screensaver, then we disable not only the Android settings but also the settings.ini file in the mtc-manager folder - screenClock = false
    Code:
    # inclusion of an alternative screensaver, if you specify false, the standard mechanism will work:
    screenClock=false
    # the time to turn off the screen, if not set, the value from the default settings will be used:
    screenTimeout=260
    # name of the program of the screensaver
    screenPackage=com.microntek.screenclock
    # activation screen saver name
    screenClass=MainActivity
    The sound is restored (high and low frequencies are raised). If you do not like the sound in the system - Delete the Root Explorer file in the system\ etc\init.d\33i2cset
    The work of init.d is restored
    Other additions and fixes.

    The firmware must be installed with the removal of all data (Wipe Data) !!!!

    Do not forget to copy the folders gps-launcher, mtc-launcher, mtc-music, mtc-radio to the root internal memory internal_sd, and folder mtc-manager to the root of the external card external_sd and activate the modules in Xposed.
    Version with the official Google Market:
    Download the version with the official Google Market: https://yadi.sk/d/bBIUME4_3Mft2r
    Version with MicroG:
    Download version from MicroG: https://yadi.sk/d/ZZJ2vX0e3MftdK

    New from July 09, 2018 for the RK3188 800X480 and 1024X600 MTCD Firmware № 13

    1. New versions of Music - are in the OEM application.
    2. In Settings, the item Lock screen is added.
    3. New screensavers with a graphic equalizer (located in the OEM application)
    4. New PCRadio - in a transparent style from the uv. DUK.
    5. New screensaver 2 in 1. With analog and digital clock. Change the screen - click on it for 2-3 seconds. (installed by default)
    6. New Radio with a quick access panel (installed) and without a panel (enclosed in the OEM application)
    7. The Music button is added to the Music application with the option of selecting a graphic equalizer with a quick access panel (installed) and without a panel (in the OEM application)
    8. Correct reboot (including MCU) of the device from the StatusBar (many thanks sva4pda for the help)
    9. The volume of the bell is reduced.
    10. In the application OEM added Live Wallpaper - Planets (you can try to install them, cool will look in the transparent versions of the Screensaver, Music and Radio :))
    11. Other additions and corrections.

    The firmware must be installed with the removal of all data (Wipe Data) !!!!

    Do not forget to copy the folders mtc-launcher, mtc-music, mtc-radio to the root internal memory internal_sd, leave other folders on external SD (external_sd) and activate modules in Xposed.
    Version with the official Google Market:
    Download the version with the official Google Market: https://yadi.sk/d/S-HQ3I9N3YxRgj
    Version with MicroG:
    Download version from MicroG: https://yadi.sk/d/uJPHkAKB3YxRkG

    If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then click on the "Donate to Me"
    -------------------------------------------------------------------------
    Examples of writing in Settings - Date & Time - Custom JAVA format for display in the status bar.

    examples:

    dd.MM.yyyy - 17.04.2016
    dd / MM / yyyy - 17/04/2016
    dd MMMM yyyy - April 17, 2016
    dd MMMM - April 17
    EEEE, dd MMMM - Tuesday, April 17
    HH: mm: ss - 20:33:30
    K: mm a - 4:45 PM

    date

    D (day of the year) - 199

    E / EE / EEE (day of the week) - W
    EEEE (day of the week) - Tuesday
    EEEEE (day of the week) - In

    F (day of the week in the month) - 2 (2nd week of July)
    FF (day of the week in the month) - 02 (2nd week of July)

    G (era) - NE

    L (Autonomous month) - 1
    LL (Autonomous month) - 01
    LLL (Autonomous month) - January
    LLLL (Autonomous month) - January
    LLLLL (Autonomous month) - I

    M (months in a year) - 1
    MM (months in a year) - 01
    MMM (months in a year) - January
    MMMM (months in a year) - January
    MMMMM (months in a year) - I

    W (weeks to months) - 2
    WW (weeks to months) - 02

    c / cc / ccc (Autonomous day of the week) - W
    cccc (Autonomous day of the week) - Tuesday
    ccccc (Autonomous day of the week) - In

    d (days per month) - 1
    dd (in the month) - 01

    w (weeks in a year) - 9
    ww (weeks of the year) - 09

    yy (year) - 16
    y / yyy / yyyy (year) - 2016

    Time

    H (hours a day: 24) - 3
    HH (hours a day: 24) - 03

    K (hours am / pm: 12) - 1
    K (hours am / pm: 12) - 01

    S (milliseconds) - 700

    h (hours am / pm: 12) - 3
    hh (am / pm hours: 12) - 03

    k (hours per day: 24) - 7
    kk (hours per day: 24) - 07

    m (minutes per hour) - 5
    mm (minutes per hour) - 05

    s (seconds to minutes) - 5
    ss (seconds in a minute) - 05

    a (am / pm marker) - PM

    z / zz / zzz (time zone) - STV
    zzzz (time zone) - Pacific Standard Time

    Z / ZZ / ZZZ (time zone RFC 822) - 0800
    ZZZZ (time zone RFC 822) GMT-08: 00
    ZZZZZ (time zone RFC 822) - 8:00

    '(The escape character to the text) -'Date ='

    '' (Quote) - 'o''clock'




    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    17
    Hi Malaysk,
    you are my last hope to restore my car radio Pumpkin RQ0253
    https://www.youtube.com/watch?v=N7609a9FSMg
    After the upgrade with your Rom ( http://huifei.fs-fileserver.de/cont.../Malaysk Quadcore RK3188/1024x600/22.05.2016/ ) I had to do a wipe all data but I can not enter anymore in recovery mode.
    Can I reinstall from zero a recovery on my car radio (as with odin tool on Android phone?)
    Please help me
    Why do you have installed the firmware from another device ?????? I did on the first page giving the link to the file server ??? You device MTCD or MTCB?
    Author instructions - booroondook http://4pda.ru/forum/index.php?showtopic=704934&st=1140#entry44581689

    Google translator :
    RECOVERY UNIT SLAIN to RK3188
    It recommended for those who have no-OTG port and mechanical buttons
    (Responsible for the consequences rests with you)

    Download the archive, unpack it to any folder (preferably in a way there are no gaps, and Russian letters).
    Attached faylSD_Firmware_Tool.zip (489.51 Kb)

    The archive is SD_Firmware_Tool.exe program. With its help, we will prepare a boot card.
    We also need:
    1) Windows PCs having a card reader
    2) the microSD-card for 2 - 4 - 8 - 16 GB in fat32 (in the process of all the data on it will be erased).
    3) The firmware (file update.img), compatible with the processor and a screen resolution of your PG. Desirable - the same one that was on the device to "brick".

    Operating procedure:
    1) Insert the card into the card reader PC
    2) Run the program SD_Firmware_Tool.exe
    3) In the top drop-down list "First: Choose removable disk" select the drive letter that corresponds to the card.
    4) The following set box "Upgrade Firmware".
    5) Press "Firmware" button and select the firmware file our update.img.
    6) Hit "Create" button and wait for the end of the process.
    7) Close the program and look at the map. The memory card will appear rksdfw.tag files, sd_boot_config, sdupdate.img
    8) Completely disable power radio. That is, even disable BAT wire (yellow), not to mention the ACC (red). It is best to simply pull the main connector on the rear panel.
    9) Insert the card into the slot "GPS" radio.
    10) Turn on the radio, turn on the main power supply, including the ACC (as a working version - advance include ACC in the car, and then connect the radio to the main connector).
    11) Wait a few seconds and do not worry.
    12) An indication of the success is a lot of text messages on a black background, similar to what we see during the normal firmware.
    13) At the end of the process at the bottom appears "All complete successful! Please remove the sd-card." (Spelling and punctuation of the original).
    14) Take out the card and wait for the download radio. If the radio is not rebooted itself after the card is removed, the "help" it by clicking on the Reset button. If the screen is not lit, then briefly press the Power.
    Everything - the process is completed.
    What to do with the card? The fact that the program format it in a special way, in Windows, you now see it incomplete volume. And it generally can not be used in the radio - or whenever you turn on automatic flashing will go.
    The card can be returned to normal size using the same program, there clicking button "Restore". Either keep this card as a tool to restore the radio.

    If you get this error - http://forum.xda-developers.com/showpost.php?p=67309331&postcount=116
    Doing so - http://forum.xda-developers.com/showpost.php?p=67598154&postcount=319
    11
    NEW October 24, 2016. Firmware №8
    Android base of 27 September JY
    Fixed XposedVolumeBar module
    Added new module for Xposed mtc-music (with the settings do not forget to copy the folder from the archive with the firmware and activate the module in Xposed)
    In Copy_TO_SD_External folder (GPS Card) - From KM - are the folders to display the speed in kilometers per hour
    In Copy_TO_SD_External folder (GPS Card) - From MPH - are the folders to display the speed in MPH (American format)
    Added different skrinsevery in OEM application (analog and digital)
    Setting display Weather in skrinsever - Settings - Settings Weather.
    Many other additions and fixes.


    If you do not like the sound of the firmware, then delete the file 33i2cset in folder system\etc\init.d.

    Download: https://yadi.sk/d/rMSNi-ppxSMx3
    10
    It's sad @Malaysk stopped , I just received my first unit and looking forward to modify it . I do have an unit from seicane, 10.1", 1024*600 , R16 1.6 GHz Quad-core. A: 5.0.1. I know they do have another 10.1 with Android 6.0 only we can get a copy would be great !!


    -Z

    I did not stop. :) Soon there will be new firmware from me. ;)
    PS: Very good news for devices without SD card! Now they will be able to use all modules Xposed where it was necessary copy the folders on the sd card.
    9
    Pre-Christmas gift from me. :D
    A gigantic work done within 2 months with the release of firmware №8. I want to express special gratitude to the people helped make the world a brighter :):
    For a huge contribution to finalize Xposed modules for MTCD devices - MVG-V70
    For adding MtcdTools program - author f1x
    For launchers presented in OEM application to change the name - booroondook
    For the red and green color applications are in the OEM application - AlexNikolaev
    NEW of 18 December 2016. Firmware №9
    Android base on November 22, 2016

    download - http://forum.xda-developers.com/and...lopment/rom-malaysk-roms-mtcd-device-t3385309
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone