[ROM][RK3188][HD] Malaysk ROMs Lollipop 5.1.1 for any yet known MTCB-Device

[Mufamba]

The one with quadcore and 1gb RAM
Mcu 2.91

Gesendet von meinem SM-G900F mit Tapatalk

 

[MiLe-SB]

The one with quadcore and 1gb RAM
Mcu 2.91

I suppose there are dozens or hundrets of different devices with these specifications (like a car with 4 wheels and 6 cylinders). Follow the link ro L5.1.1.Quadcore, then ...800x480 and that's it.
No guarantee that this rom wil fit your unit where even the manufacturer is unknown, but most probably, it will.
I suggest to learn first a bit about ROMs, flashing.. .if not, it can cause really a lot of trouble. I know a bit what i talk about - just made this mistake not a long time ago and paid the price in form of several sleepless nights

 

[Jaihoidundso]

Is there any solution for the laggy lollipop? Sometimes it takes a very long time to open Waze and than another app. Sometimes it gives a blackscreen too. :/

What is that? On the carjoying site:

Android 5.1.1 Lollipop car Head Unit Audio stereo upgrade for Joying

Note: Please do NOT upgrade ROM from Malaysk on forum.xda-developers.com or other brand. Because it is a serious issue, it will broken head unit and dead(WIFI doesn't work, head unit die). If you updated you do NOT update your lollipop anymore and will lost warranty. See this video https://youtu.be/pGCROGRV1Mo , it is NOT really android 5.1.1 lollipop verion.

 

[Malaysk]

Is there any solution for the laggy lollipop? Sometimes it takes a very long time to open Waze and than another app. Sometimes it gives a blackscreen too. :/

What is that? On the carjoying site:

Android 5.1.1 Lollipop car Head Unit Audio stereo upgrade for Joying

Note: Please do NOT upgrade ROM from Malaysk on forum.xda-developers.com or other brand. Because it is a serious issue, it will broken head unit and dead(WIFI doesn't work, head unit die). If you updated you do NOT update your lollipop anymore and will lost warranty. See this video https://youtu.be/pGCROGRV1Mo , it is NOT really android 5.1.1 lollipop verion.

Ha ha, this warning is written for a long time. Some people mistakenly put the firmware MTCD - MTCB. The result was a brick. Who understands android - restored the device. Others were sent back to the seller.

 

[satjoker]

I tried 5.1.1 noticed too slow to switch between Aplications and other .meglio kit kat

 

[Oldpapa49]

Ha ha, this warning is written for a long time. Some people mistakenly put the firmware MTCD - MTCB. The result was a brick. Who understands android - restored the device. Others were sent back to the seller.

I guess some can not understand you have 3 or more threads dealing with units and software.

This section of the forum is for putting an 5.1.1 image on a MTCB device (MTCC possible)
You also have 4.4.4 images on a MTCB (MTCC) devices and
5.1.1 images (your own) on a MTCD device which come with 5.1.1 already! Just the software is what you adjusted and added certain apps.
In fact, all of your own ROMS are what you made for yourself with features you like and added as an enhancements.

And yes, leave the MCU option alone people. The MCU is like what buttons are assign to what function. Like when you turn on the lights in the car, the lights come on, not the car starting.
So, if you have a MTCD unit and you happen to flash a 4.4.4 image onto it, wallah, it be borked! The ROM will put the 4.4.4 flash program onto the 5.1 and it is gone. You might be able to recover if there is a way, but MTCD are pretty new. It like flashing your Samsung with an LG image and nothing no longer works!

So make sure your in the correct forum for your device, and if you have never ever flash(electronically) anything .. read read read. Be for warn that things might go bad, and it might be really really bad.
It is always a RISK doing this.. And it has been posted so many times, stated so many times.
And there are so many different Android radios too.. Some will work great (mine) and some others not (not mine)

 

[Goddy2909]

Hello,

i installed the second version of this rom on my S07 rk3188 (1024*600 MCU KYD 2.83). Before, i had the original stock rom.
I truly like the new rom but it is kind of slower. It does also a dual boot every time and sometimes it doesnt react at all (after listening spotify for an hour or so)

I would like to test the 4.4.4 malaysk rom now. Can i flash the rom the same way i did before.? Is there anything else i need to consider? I belive i flashed the rom from the recovery menu and did a factory reset and data wipe after that. But i am not exactly sure.

Thank you for the work on the roms and for eventually answering my (maybe stupid) questions. And sorry for my bad englisch, i will work on that.

Best regards,
Goddy

 

[docurley]

I have been using this ROM now for 2 weeks and I've come to the conclusion it needs the extra ram. I have slow loading, double boot slow apps loading up and crashing of apps and power amp willing my favourites. So its back to 4.4.4 for now until 5.1 is perfected or a way to get more ram in to these units.

Sent from my Wileyfox Storm using XDA-Developers mobile app

 

[tsmith3480]

Double Splash and Last App Launch on Boot

I have the Eonon unit, which is an rk3188 - 800x480 - KLD6 head unit. This came with KitKat 4.4.4 and I recently upgraded to the Malaysk 5.1.1 ROM (update_5_1_1_FUSE_800X480_RK3188_02_MAL_02_07_2016_MTCB). Everything is great, with 2 exceptions, both happen on boot. When the unit first boots up, the splash screen (in my case, a Chevy logo) shows up like normal. After about 20 seconds, it goes to the launcher (home) screen for about 5 seconds and then flips back to the Chevy logo splash screen for about another 10 to 15 seconds. Second, and this may be related to the first issue, is that my last app no longer auto-launches after reboot. Most of the time this is the MTCradio app, but in 4.4.4 any app that was being used when the unit shut down would automatically start the next time it booted up. Has anyone else seen this and/or know how to fix?

Thanks!

 

[pathfinder78]

I had the same issue. The unit is crashing after trying to start the last active app. Thats why you see your car logo twice. I was not able to solve this and tried another ROM

Gesendet von meinem Mi-4c mit Tapatalk

 

[hans109h]

I have the Eonon unit, which is an rk3188 - 800x480 - KLD6 head unit. This came with KitKat 4.4.4 and I recently upgraded to the Malaysk 5.1.1 ROM (update_5_1_1_FUSE_800X480_RK3188_02_MAL_02_07_2016_MTCB). Everything is great, with 2 exceptions, both happen on boot. When the unit first boots up, the splash screen (in my case, a Chevy logo) shows up like normal. After about 20 seconds, it goes to the launcher (home) screen for about 5 seconds and then flips back to the Chevy logo splash screen for about another 10 to 15 seconds. Second, and this may be related to the first issue, is that my last app no longer auto-launches after reboot. Most of the time this is the MTCradio app, but in 4.4.4 any app that was being used when the unit shut down would automatically start the next time it booted up. Has anyone else seen this and/or know how to fix?

Thanks!

Do you have an OBD Bluetooth device enabled?

Change the keymap version in factory settings, one of them should get your last app to reopen.

 

[tsmith3480]

Do you have an OBD Bluetooth device enabled?

Change the keymap version in factory settings, one of them should get your last app to reopen.

I do have an OBDII bluetooth device enabled. I'll check the keymap version in factory settings. Is there a specific one I should be looking for or trial and error? Thanks!

 

[tsmith3480]

I had the same issue. The unit is crashing after trying to start the last active app. Thats why you see your car logo twice. I was not able to solve this and tried another ROM

Gesendet von meinem Mi-4c mit Tapatalk

After seeing what hans109h said, I tried changing the keymap. I tried all 10 and still had the issue. Since he mentioned something about the OBDII, I tried disabling that (removing the device from my paired devices) and it now works. It's kind of a nuisance to have to repair the OBDII bluetooth adapter every time I want to use it, but it's something I can deal with. Anyone know if there is workaround for the OBDII issue causing the last app to not launch properly on boot and making the HU crash?

Thanks again hans and pathfinder!

 

[SkyBehind]

I'm still not able to find it...were you able to find it on your unit?

I also can't find where to turn off the screen saver. I set the audio timeout to never, but it didn't shut it off. I'm also running Nova launcher and I've deleted all but the Next launcher. Can anyone help?

 

[hans109h]

After seeing what hans109h said, I tried changing the keymap. I tried all 10 and still had the issue. Since he mentioned something about the OBDII, I tried disabling that (removing the device from my paired devices) and it now works. It's kind of a nuisance to have to repair the OBDII bluetooth adapter every time I want to use it, but it's something I can deal with. Anyone know if there is workaround for the OBDII issue causing the last app to not launch properly on boot and making the HU crash?

Thanks again hans and pathfinder!

No problem. Everything is trial and error with these. On some keymap versions my Wi-Fi wouldn't turn on, but the majority were the same. Some would result in previous apps opening on boot, some wouldn't, but with an obd device there is a crash that causes the boot logo.

Glad you found a fix.

 

[hans109h]

I finally got my OBD device to work! So thrilled. Malaysk, thanks again for all your work on these roms!

 

[RichyE]

I have version 2 running now (Eonon G2210F) for 3 weeks and so far no problems or lag.
My Kid can watch movies without a problems or lag and GPS works perfectly.

The only thing not working is the screensaver.
I have copied the data to the GPS card and activated the xposed module

Thanks for this update

 

[thejohnson486]

Any update why the links to the images have been removed>?

 

[tsmith3480]

Found another issue with bluetooth. My phone audio doesn't come through. If I play music on my phone and it is paired to my HU, it will come through the car speakers without issue. If I make a phone call, the audio does not come through the car speakers. I'm assuming this might be another keymap option change, but before going through that, I wanted to see if anyone experienced the same.

 

[MiLe-SB]

Found another issue with bluetooth. My phone audio doesn't come through. If I play music on my phone and it is paired to my HU, it will come through the car speakers without issue. If I make a phone call, the audio does not come through the car speakers. I'm assuming this might be another keymap option change, but before going through that, I wanted to see if anyone experienced the same.

Did you have all speakers connected?
I experienced the same "problem", while i had the unit for tests and configuration on the desk with only one speaker connected to the front right channel. Bluetooth audio is sent to all speakers, bluetooth phone just to the front left. No difference if 4.4, 5.1, stock or malaysk ROM. maybe some settings in the factory menu for left or rightsteering cars make a difference here as this could change the side where BT phone is monitored.
Another "feature": Regulary, voice commands from the navigation software come from left and right speakers, except if the fm tuner is playing, then they come only from the left speaker.
For this reason, i flashed the mcu and bricked my unit just for nothing