[ROM][RK3188][HD] Malaysk ROMs Lollipop 5.1.1 for any yet known MTCB-Device

[Oldpapa49]

I have just install the latest version. I still encounter the same problem that after each reboot the radio stations are reset.
Is there a solution for this?

Reboot as shutting down or a reboot as using the reboot from status bar or going into recovery type. Let me know
I have MCU KLD9-V2.98 now on my radio (Last was KLD6-V2.97)

I will do this today. I have not set radio stations yet. Be a good time to try.

 

[DWilks]

This module does not exist in xposed, so nothing can be activated.

Open ApkInstaller
Click Manage
click MTC-Volume
click Launch
Service enable....enable this
click Settings
Scroll down to "SCREEN BRIGHTNESS"
and change the settings to your preferences!

 

[libaba]

Reboot as shutting down or a reboot as using the reboot from status bar or going into recovery type. Let me know
I have MCU KLD9-V2.98 now on my radio (Last was KLD6-V2.97)

I will do this today. I have not set radio stations yet. Be a good time to try.

It's restart each time i am switch off my car and open it again.

 

[Oldpapa49]

It's restart each time i am switch off my car and open it again.

Thanks fore the info. I setup a few stations and try at lunch

 

[jonsfield]

Hello
I installed the last version 800x480. It work very well, I passed the verion of july to the last and for me the version is more reactive.
I recover the save screen information KM/H and clock.
Thanks you very much for your work Malaysk.
I have the issue with the blue-touch and my cell phone during my call, I do not heard the sound on the car speaker.
I know this issue is known by you do you have some explanation on that this due to driver software ?

thanks in advance for your answer.

I wish you to find a new job as soon as possible. Thanks you again for all the time spend the development for us.

Hi Nico

I had same problem on my radio, try changing Bluetooth chip under factory settings...

Sent from my SM-G920F using XDA-Developers mobile app

 

[radical_tuning]

I've installed last october 800x480 version it works really better than september. But I've missed the new launcher (I cannot remember its name) and I've also seen 4.4.4 kitkat during installation instead of 5.1.1. (it was weird). Very soon to say something but it looks that everything works good. Thanks Malaysk.

 

[nico21311]

Thank you for your answer.

Do you have more détail regarding the procédure?

 

[typos1]

I've installed last october 800x480 version it works really better than september. But I've missed the new launcher (I cannot remember its name) and I've also seen 4.4.4 kitkat during installation instead of 5.1.1. (it was weird). Very soon to say something but it looks that everything works good. Thanks Malaysk.

I think Malaysk is now using the KK recovery on L ROMs, just like @dsa8310 does on his.

 

[Oldpapa49]

I think Malaysk is now using the KK recovery on L ROMs, just like @dsa8310 does on his.

Yes he does. KK recovery on 5.1 like dsa8310

Sent from my SM-G930T using XDA-Developers mobile app

---------- Post added at 12:25 PM ---------- Previous post was at 12:16 PM ----------

It's restart each time i am switch off my car and open it again.

I have no issue. After reading closer, did one of your power wire connection in your car go bad. 1 wire is connected directly to battery to keep memory alive in the radio.

My setting has the MCU kld9 v2.98 and my radio stations now stay, even after a reboot and reset.
Older MCU I lost radio stations, but normal off and on I have never had issues. Check your wiring

Sent from my SM-G930T using XDA-Developers mobile app

 

[eblackie]

I have just install the latest version. I still encounter the same problem that after each reboot the radio stations are reset.
Is there a solution for this?

When your stations are tuned, press in status bar on the right side this symbol with the 9 quads and a menu on bottom of the radio should apear, there, select "save settings" and your stations should be save for now. After a new "ignition" you should be able to restore your radio settings in the same menu. Yes i know, it's just a workaround.
You should have a look at your + 12 Volt Cables maybe you have to reverse the yellow with the red one.

 

[radical_tuning]

I come from september version (v4) to october (v5), but I cannot find "car launcher" now. It would be great if Malaysk can include "car launcher" in the next versions, because the headunit looks like OEM. By the other hand, could anyone share a launcher similar to the attached link or give me some support about how customizing it?

http://i1269.photobucket.com/albums/jj583/Tuxinator/E8x%20Nexus%207%20Install/2015-03-01%2019.42.06%20-%20Copy_zpscxu9jtma.jpg

 

[Oldpapa49]

Darn, I added a app that started me down the path of lag.. I tried to see which one or something else has happened.
I had the latest 5.1.1 rom (malaysk) with MCU of KLD9-V2.98
I just dropped back to Malaysk 4.4.4 and I had to lower my MCU to KLD6 V2.91 (I have others, but to safe)
The V2.98 caused reboots on 4.4.4 Kinda of like one poster that is having issues where he just gets into the start of the launcher and it just reboots. This might be a problem with a few users.
I just reloaded 4.4.4 now and will do other stuff later to return back to 5.1

 

[vegeta491]

I installed this version on my head unit (RK 3188 800x480) but I found it too slow and with some lags, so I came back to malaysk's 4.4.4. After I've done it, the music player suddenly and randomly changes songs or turns off the volume by itself. Someone had this problem and resolved it?

 

[nuovagrafica]

please can someone tell to me if Malaysk rom MTCB or Malaysk ROM MTCB work on the following unit with 2GB ram?
http://www.autopumpkin.com/car-dvd-...-gps-obd2-wifi-3g-steering-wheel-control.html

can you tell me if that unit is MTC-B, MTC-C or MTC-D?

 

[Oldpapa49]

please can someone tell to me if Malaysk rom MTCB or Malaysk ROM MTCB work on the following unit with 2GB ram?
http://www.autopumpkin.com/car-dvd-...-gps-obd2-wifi-3g-steering-wheel-control.html

can you tell me if that unit is MTC-B, MTC-C or MTC-D?

As far as being a MTCB/MTCC or MTCD, i would go with MTCB because its a 4.4 unit. Webpage says RK3188 which is good. But no idea what MCU it could be.

 

[typos1]

please can someone tell to me if Malaysk rom MTCB or Malaysk ROM MTCB work on the following unit with 2GB ram?
http://www.autopumpkin.com/car-dvd-...-gps-obd2-wifi-3g-steering-wheel-control.html

can you tell me if that unit is MTC-B, MTC-C or MTC-D?

Its NOT an MTC unit, its from a totally different manufacturer, so none of Malaysk's ROMs will work on it.

See the "Lollipop for MTCB Headunits" thread for info an how to add an extra 1GB RAM, if youre after a 2GB RAM device.

 

[nico21311]

Hello

Could you please explain us with a short description. to install other driver ?

thank in advance for your support.

Hi Nico

I had same problem on my radio, try changing Bluetooth chip under factory settings...

Sent from my SM-G920F using XDA-Developers mobile app

 

[hans109h]

Hello

Could you please explain us with a short description. to install other driver ?

thank in advance for your support.

Nico,

Go to settings, then factory settings, enter the password (usually 126) then select the other tab. On that screen there is a drop-down menu where you can select various Bluetooth protocols. Test them until you find one that works. You need to reboot for the change to take effect.

 

[ricanxd]

Anyone else notice the Android 6.0 on that link? http://www.autopumpkin.com/android-...-64gb-usb-wifi-3g-steering-wheel-control.html

 

[Oldpapa49]

Anyone else notice the Android 6.0 on that link? http://www.autopumpkin.com/android-...-64gb-usb-wifi-3g-steering-wheel-control.html

Old news.. been watching.. fast boot because it sleeps and not power off

Sent from my SM-G930T using XDA-Developers mobile app