[ROM] [S 12.0 GVA9] BLASTUI ROM FOR G970F/G973F/G975F [ONEUI4.0] [ODEX] [V5.0] [AROMA] LIKE A FERRARI!

[Blast752]

BLASTUI v5.0 ROM FOR S10E/S10/S10+​

This is offcial thread for BLASTUI ROM FOR S10E/S10/S10+.​

Join my telegram news channel for news about BlastUI Join now!
Finally i am a recognized member and i can post from myself, so this is the new BlastUI Thread!!
Hi guys, I'm Blast752 and I'm ROM Developer

I do not waste your time, and I will immediately tell you the features of my rom

-FEATURES:
● Stock odex version based on latest 12.0 S G975FXXSEGVA9 Firmware
● Security patch level: 2022-02-01
● Changelist: February 2022 Changelist
● AROMA INSTALLER,YOU CAN SELECT WHAT YOU WANT AND WHAT NO
● Knox and FOTA removed!
● OneUI 4.0!
● DEBLOAT WITH AROMA AND CSC TWEAKS
● Supported models: SM-G970F/N,SM-G973F/N,SM-G975F/N EXYNOS
● ThunderStorm Kernel, Modifed Blobs ad optimizations thx @nalas
● RMM state lock fix included (NoVerity,Multidisabler)
● OSPatchLevel changer included for fix SamsungAccount
● Bluetooth pairing and connection fix included
● Hidden OEM unlock in developer settings for your security
● Setting device status official in settings
● Auto backup EFS partition to your internal storage for your safety (/data/media/0/BlastUI-EFSBackup)
● Build.prop tweaks for better battery and performance
● Support wifi calling and volte
● Heavy Debloated, for better performance, privacy,battery, and stability
● Reduced useless ram usage
● Modified fstab for support f2fs (only /data due to Samsung limitations on cache)
● Magisk safetynet fix included, all banking and protected apps will work
● Integrated preload apps: Magisk Canary and Thunderstorm Tweaks for kernel management
●Nuked and tweaked Gapps; removed:
•Google Feedback
•Google Location History
•Ok Google Enrollments
●in general, eliminate unnecessary things and improve privacy probably
●Reduced zip file with new installation scripts
●Other little things...

- KERNEL:
● Using latest stock kernel for now, GVA9 release
● Kernel Sources: Simply latest stock Samsung Kernel (latest Boot.img), check SOURCE HERE

TIPS:
● Knox related features such as secure folder, secure wifi, samsung pay or samsung pass may not work any longer after rooting your phone! Only Samsung Health will work!!!
● Rom not included bootlader and modem flashing (if you want update them to latest flash it via odin)
● Don't update magisk from magisk manager (magisk is included into pre-rooted custom kernel and can't be updated via magisk manager!)


INSTALLATION:
IMPORTANT INFORMATIONS:
1. WARNING: YOU UNDERSTAND THAT INSTALLING CUSTOM FIRMWARE/ROM/KERNEL IS AT YOUR OWN RISK!!!
2. YOUR WARRANTY CAN BE VOID.
"I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this kernel before flashing it! YOU are choosing to make these modifications, and if you point
the finger at me for messing up your device, You can't blame me for this fact."
3. NO ETA REQUESTS!!!

• ROM INSTALLATION GUIDE:
  •Updated on 28/11/2021
  ⚠For read this on the group type #installation
  
  
• 0. UNLOCK BOOTLOADER:
  Open Fastboot long press vol up. unlock (wipe phone)
  Reboot connect internet to remove RMM (vaultkeeper) & enable oem unlock again
  
  1. INSTALL TWRP:
  Fastboot: Odin Flash TWRP .tar latest from Corsicanu (AP) + Avbmeta .tar (CP)
  (disable auto reboot)
• TWRP Samsung Galaxy S10 Series
• https://downloads.corsicanu.ro/samsung/vbmeta-27.10.2020/
  After flash finish. Press vol up + bixby + power to force boot straight in TWRP
  
  2. TWRP: Wipe Format data + flash multidisabler zip (to disable encryption/security)
• https://forum.xda-developers.com/ga...ynos/g97xf-multi-disabler-encryption-t3919714
  
  3. Install latest Bootloader (Corsicanu): in Fastboot Odin .tar (BL) or TWRP zip
• https://github.com/corsicanu/9820-bootloaders_and_modems
  Is always necessary to have the latest update
  
  4. Flash BlastUI Rom ZIP in TWRP
  
  5. (Optional) Safetynet FIX
• use the FILE HERE, you need magisk 23.0 and magisk module "Riru 24.0.0x" or use Zygisk with new magisk canary versions, flash in magisk like a normal module after installed that, enable magisk hide on play store and play services... PS. FIRST DISABLE ALL OTHERS SAFETYFIX MODULES

SUPPORT ME:
Check links on telegram group
Join my telegram news channel for news about BlastUI Join now!

DOWNLOAD ROM: ​

AFH link ​

G-Drive link​

TELEGRAM:

Join my telegram news channel for news about BlastUI Join now!​

Join my telegram group chat for support and make a little good community for our devices Join now!​

CREDITS:
SuperR - for kitchen
topjohnwu - for magisk root
Osmosis - for busybox and some other script
corsicanu - for some fix and help
nalas - for a big help and support and other tweaks
Anan1211 - for help and some explanations
ianmacd - for multidisabler
evdenis - for backtothefuture.zip
@ambasadii - a special thx for him, for his work,some scripts; I got he as a hint; and thx for the support to community of our galaxys

I will update thread very often for improve it!

 

[Blast752]

CHANGELOG:

🔥🔥🔥BlastUI 5.0 OUT!🔥🔥🔥
- Updated base on GVA9 (A12.0 OneUI 4.0)
- Updated to February 2022 Security Patch
- Updated to changelog list: 23326020
- Changed kernel: using latest stock
- Removed preload samsung notes and calculator
- Better installation and optimized files
- Rebased all aroma for fix critical bugs
- Added fix for shealth 6.21 (may not work)
- Improved battery usage
- Cleaned and disabled other logging
- Cleaned from useless things 
- Re-worked debloat functions
- Fixed battery drain
- Fixed micro-lags on UI
- Fixed various bugs
- Misc changes

🔥🔥🔥BlastUI 4.2.1 OUT!🔥🔥🔥
- Downgrade to magisk v23 apk, please use only this!
- Use kernels that uses only magisk v23!
- General Improvments to system
- Fixed Bugs
- Improved installation
- Updated Vanced.apk
- Updated Samsung Calculator and Samsung Notes

🔥🔥🔥BlastUI 4.2 OUT!🔥🔥🔥
- Updated to latest FUJ2 Samsung November Update
- Fixed Bugs
- General Improvments
- Lot of enhancements
- Improved Security
- Improved Overall Performance
- Small other improvments
- Battery optimizations

BlastCruelKernel v1.4:
- Improved overall performance
- Improved kernel power management
- Updated magisk to latest canary (please use kernel with v23 stable, i will downgrade it, gives problems!)

🔥🔥🔥BlastUI 3.45 OUT!🔥🔥🔥
-Updated TS Kernel to latest stable (Linux 4.14.246 - FUH3-FUH5)
-Updated to latest Samsung FUH5 Update
-Updated to September 2021 Patch
-Added other tweaks in build.prop :)
-Added other debloat and cleaning section in installation script
-Updated TTweaks
-Bug fix, removed useless code and insert new code for preparing for BIG BlastUI 4.0 Update!

🔥🔥🔥BlastUI 3.4 OUT!🔥🔥🔥
-Updated TS Kernel to latest stable (Linux 4.14.246 - FUH3)
-Updated to latest Samsung FUH3 Update
-Updated to August 2021 Patch
-Fixed and reworked build.prop tweaks
-Tons of new tweaks and optimizations in build.prop
-More debloat in installation script
-Updated TTweaks, Samsung Calculator, Samsung Notes and Vanced Manager
-Bug fix, removed useless code and insert new code for preparing for BIG BlastUI 4.0 Update!

🔥🔥🔥BlastUI 3.35 OUT!🔥🔥🔥
-Updated TS Kernel to latest stable
-Updated to latest Samsung FUF3 Update
-Updated to July 2021 Patch
-Insert lot of new optimization tweaks
-Some debloat improvments
-Lot of new floating feature tweaks!!
-Cleaned and improved installation script
-Updated Samsung Notes & Calculator to latest versions
-Performance improvments
-Battery system improvments
-Touch improvments
-Some bug fix
-Minor changes
-Removed useless code and stuffs

🔥🔥🔥BlastUI 3.2 OUT!🔥🔥🔥
-Updated to latest FUE3 May 2021 Update
-Updated magisk.apk to latest 23001 canary
-Linux upstreamed to 4.14.232
-Optimizations from Linux 5x
-Lot of schedutil optimizations
-Modded DTB/DBTO optimized and fixed bugs
-Overclock up to 2.91 GHz
-Support UV GPU
-Clang 11.02 (Latest)
-Improved AROMA Installer
-Removed useless code and stuffs
-Improved description on debloat menu of AROMA
-Lot minor improvments
-Installation improvments
-Lot of misc changes and updated modules,installers,dependencies
-Fixed old installer in AROMA
-Fixed Bugs

🔥🔥🔥BlastUI 3.1 OUT!!!🔥🔥🔥
-Rom Changelog:
Improved Battery
Improved Security
Improved System apps optimizations
Improved Startup (faster)
Improved smoothness and performance
Improved Aroma Selections and descriptions
Insert OS_PatchLevel.zip
Insert Multidisabler 3.2 Beta 7 (new fixed)
Insert Forced NoVerity
Insert Bluetooth Fix
Insert New Magisk SafetyNet Fix (enable magisk hide first)
Insert Magisk fix
System Tweaked more!
Now only with BullFrog Kernel (FREE Version) but You can use any kernel you want
Lot of some minor improvments
Debloated another time some new useless apps more
Removed Multi-Kernel select in aroma (too problems)
Reduced a lot installer code
Smooth Aroma Installer
Smallest BlastUI.zip ever
Updated magisk.apk to latest canary
Updated preload apps like samsung notes...
ThunderTweaks app for modify your kernel settings (works with all kernels with limited functions if you don't use thunderstorm kernel obv)
Fixed Bugs
Fixed multidisabler installation
Fixed CleanBootlogo installation
Fixed S10 Installation (no booting for some people)
Misc changes and minor cleaning in script and system


🔥🔥🔥BlastUI 3.0 OUT!!!🔥🔥🔥
•Improved Battery
•Improved Performance
•Removed All Gapps removing function (bootloop)
•Better installation script
•Removed all useless things from previous versions
•Removed All Magisk Modules like (safetynet fix and busybox mod) because can't be installed anymore from twrp (You Need manually install in magisk)
•Fixed Bugs
•Minor Changes

🔥🔥🔥BlastUI 2.75 OUT!!!🔥🔥🔥
•ROM:
- New Base FUBD Android 11 Firmware
- OneUI 3.1 March Firmware (2021-03-01)
- More options in Aroma
- Aroma option for remove all Google Services [BETA!]
- FUBD Modem and CSC (with tweaks)
- Small Improvments
- misc changes
•KERNEL:
- Magisk 22.0
- Stability improvments

🔥🔥🔥 BlastUI 2.5 OUT!! 🔥🔥🔥
•Lot of improvments
•Fixed lot of bugs
•Implemented AROMA Installer (using @ambasadii theme so thanks to him) •Implemented all CSC tweaks
•Updated to EUB1 (2021-02-01)
•with Batter Kernel 9820 for now.
•Better Stability
•Misc and Installation Improvments

🔥🔥🔥BlastUI 2.2 OUT🔥🔥🔥
•Very big Update
•ROM:
New Base EUA4
Integrated Bixby Remap App
Integrated latest ViperFX
Debloated a lot more
Integrated all CSCs tweaks
More build.prop
Integrated modded Services.jar for use permissive kernel settings
Updated all apps to latest version
Integrated my privacy and fast optimizied modded Firefox (Super)Lite (you can uninstall)
Updated Camera to best quality
Improved stability
Improved connections
Fixed lot of bugs (if you have some, do a clean flash)
Minor improvments
•KERNEL:
Removed lot of loggers
25 ticks now (best battery and stability)
Improved performance
Improved Security
Improved Wi-Fi and Data Connections
Integrated Fingerprint Boost
Startup optimizations
Improved general things
Updated drivers
Minor changes for best privacy and standby usage
Reinsert Automatic low frequencies in standby for nuke the ****ty-background usage

🔥BlastUI 2.1 OUT WITH ANDROID 11 AND ONE UI 3.1 APPS🔥!
•ROM:
●Implemented almost all apps of OneUI 3.1
●New OneUI 3.1 bootlogo
●New OneUI 3.1 sound,ringtones things etc...
●Fixed camera bug of G975F
●Updated Safetynet Fix
●Removed Chrome from system apps, u can install it normally from PlayStore
●Further improvements to cleaning
●Fixed GMS login on third party apps
●Nuked others things useless of Samsung and GMS
●Samsung Free integrated but is not ready to working, so we need to attend
●Fixed all bugs
●Other minor changes
•KERNEL:
●Improved Stability
●Updated MoroSound to 2.2.0
●Improved Security

🔥BlastUI 2.0 OUT! WITH ANDROID 11 AND ONE UI 3🔥
⚠REMEMBER: ONLY G970F, G973F AND G975F!!! ⚠
•ROM:
●Fully implemented with latest Android 11, with all new things of OneUI 3.0
●Integrated Modded Busybox thx to FDE team
●Clean, improved and reorganized code, maybe saved some time on installation
●Fantastic Dolby Atmos returned and reimplemented, fixed now it works!
●New fix for SafetyNet implemented directly in the rom installation
●Further improvements to cleaning, removal of other useless services and various reductions
●Removed libexynoscamera3.so modded because old not works on OneUI 3 and Zoran didn't update them, so gcam only with the rear main sensor
●Fixed all bugs
●Other minor changes
•KERNEL:
●Improved Performance
●Built with latest R Soruces (A11)
●Improved Stability
●Improved Battery
●Updated some drivers
●All rest like BlastUI 1.3.4

BLAST UI 1.3.4:
•Rom Changelog:
●Installation improvements
●Script improvements
●Last chance for Game Launcher, updated to the version of OneUI 3 (V.5) try it and tell me
●Samsung Game Optimizing Service updated to version 3.4
●Lot of fixes and improvments
●Misc changes
●New logger and useless samsung hidden apk removed
●Removed Bluetooth Test and all useless test apps from samsung
●Improved ram management
●Minor Changes for stability
●Fixed kernel also on G977N/B
●Useless other data and permissions removed
●Removed empty directories

•Kernel:
Same as BlastUI 1.3.3/1.3.3.1

BLAST UI 1.3.3.1:
•Rom Changelog:
●Fixed kernel installation definitely
•Kernel:
●Same as BlastUI 1.3.3

BLAST UI 1.3.3:
•Rom Changelog:
●Lot of improvments to stability and installation
●Lot of bugfix
●Streamlined, rearranged and cleaned installation code (gained 1 minute of installation in less😊)
●Removed another useless permissions
●Nuked some little ads in system
●Removed useless code
●Integrated in preload latest apk of Samsung Notes and Samsung calculator (so if u don't want these apps u can easily uninstall)
●Integrated with these apps in preload Samsung Notes Add-Ons for new useful functions (from one ui 3 and newer devices)
●Minor Changes

•Kernel:
●New TS Kernel version integrated 1.5.2 so this changelog include changes of 1.5,1.5.1 and 1.5.2👍🏻
● fixed OC Little CPU (is not OC higier then 1950MHz gives strange bugs),
● reverted some GPU commits - not usable and can gives some bugs,
● Magisk 21.2
● Disabled Freqvar Tune - but unblocked time_rate by user
● Optimizations in Linux source
● Support CIFS and NTFS
● Added BBR2 by Google TCP protocol
● Support Underclock for Little CPU to 187MHz
   Only if DTB/DTBO img will be flashed - another TS zip file
● Support Underclock for GPU back to 156MHz
   Only if DTB/DTBO img will be flashed
● Support for lower frequencies in Mid CPU to 377 MHz
   Only if DTB/DTBO img will be flashed
● Support for OC frequencies for All CPU's to 2106/2400/3016 MHz
   Only if DTB/DTBO img will be flashed
● Unlocked OC/UC in kernel source for all CPU's
● Support GPU Voltage Control
● Added ThunderTweaks - 4 profiles
● Support FlatMem
● CONFIG_HZ set at 25Hz
● Support SRANDOM x150 faster then Linux Urandom
●Added back VNSwap and ZRAM - swappiness set at 0
   - no sense use ZRAM for 8GB of RAM
● You can add ZRAM back via set swappiness another then 0
● Enabled by default WQ_POWER_EFFICIENT
● Disabled some debuggers

BLAST UI V1.3.2:
•Rom Changelog:
●Completely removed SoundAlive (Dolby Atmos) because there are no fixes at the moment, it just doesn't want to work, remember you can use Dolby Atmos via magisk ...
●Removed useless permession in /system/etc/permission
●Removed useless stuff
●New attempt to get the kernel install script to work on g970 and g973 as well (thanks @nalasTS) (hopefully it works)
●New build.prop tweaks in vendor and system
●More cleaned and debloated
●Reworked another time script for better installing
●Fixed rom name in settings
●Improved connections (bluetooth and wifi)
●a lot of bug fix and minor changes

•Kernel Changelog:
●Implemented possibility to undervolt GPU (DON'T APPLY FOR BOOT or u may have a bootloop with much undervolt)
●Disabled FRANDOM
●Added SRANDOM (x150 faster then urandom and 15x faster then Frandom)
●Some cpufreq drivers improvements
●Improved wifi and data connection
●Some improvements in initial settings
●Disabled ZRAM and SWAP
●Modified DTB - DTBO: some improvements
●Improved a lot stability
●Improved battery for gpu with new commits and stuffs
●Improved security
●Downgrade to stock Linux Version
●Dvfs killed in GPU drivers
●Minor changes

BLAST UI V1.3.1:
•Rom Changelog:
●Fixed a lot of bugs
●Lot of improvments
●Added clean bootlogo for all bootloaders(new script)
●Improved app cleaning
●Removed useless up-paran.bin installation, better to manually update bootloader
●Improved free space on system.img
●Fixed display of the rom name on settings
●Added modded libexynoscamera3.so for G970xx and G973xx for using all cameras in zgcam 7

•Kernel Changelog:
●More stability
●Improved security
●Fixed Bugs
●Updated with minor changes from @nalasTS

BLAST UI V1.3:

●Upgraded to December 2020 patches (DTK9)

●Improved a lot app cleaning and debloating (in installation script)

●Reduced zip file with new installation scripts

●Fixed lot of bugs and improved stability

●Integrated modded libexynoscamera3.so for use all cameras in zgcam 7 (only G975 devices atm)

●Integrated modded fstab for support f2fs (/cache and /data; with /data in f2fs you may have some problem due to samsung limitations*)

●Reduced another time the useless use of the ram

●Improved camera a little

●New build.prop tweaks for better battery/performance

●Fully support magisk safetynet fix

●Reduced useless code and minor optimizations

●Other little things...

Kernel:

●Still based on November (DTJA), waiting for the new samsung sources

●Improved wifi and bluetooth

●Improved stability

●Improved some security things

●Thx to @nalasTS for improving often the kernel!

BLAST UI v1.1:

●Default Kernel is ThunderStorm Kernel, compiled with Arter97,but there are other types

●Integrated:

•NoVerity

•Multidisabler

•Busybox

●Integrated Preload Apps:

•Magisk Manager 8.0.2

•ThunderStorm Tweaks 1.0.7.2 for kernel management (thanks @NalasTS)

●Heavy Debloated,list of deleted apps: https://t.me/blastui/10

●Nuked and tweaked Gapps; removed:

•Google Feedback

•Google Location History

•Ok Google Enrollments

●Disabled loggers

●Integrated Magisk Safetynet fix: make believe your device is a Galaxy S20 Ultra to surpass safetynet

●Buildprop tweaks for better stability and general improvments

●Removed the apps present in the vendor and in the product, also greatly increased the space present in / system, in general removed useless code and other things to make system management faster and better

●Reduced the use of ram used by the system (advantage of the elimination of many apps)

●in general, eliminate unnecessary things and improve privacy probably

•Kernel:
- Latest 3/12/2020 ThunderStorm Kernel.

 

[Blast752]

RESERVED #2

 

[kischon]

dl link = e404

 

[Blast752]

dl link = e404

thx for reporting, fixed

 

[FabienGege]

Good morning !
thanks for sharing and working for our Samsung

sm-g973F/DS

I tried to install the kernel and the rom but I am in a situation where the phone does not react anymore when I want to boot it normall
I can only access in download or twrp mode
The classic start does not react
I tried flashing the official Samsung rom via odin, and tried to install the BLASTUI rom several times but nothing works
I proceeded like this on
twrp (latest version) and vbmeta via odin
I deleted the data, and the custom rom that I had
then I flashed the multidisiabler then the bl and finally the rom
but then impossible to start it normally
the phone does not react and remains black
what should i do please?

 

[fatjoez]

@Blast752 can you please consider update your installation instructions using my one below.
I think it's more clear & easy to understand because it took me long time to understand your one.
you could make some changes to it.
I think it will help because lot people seem to get bootloop. maybe they dont follow the right steps

0. Unlock bootloader
Fastboot. long press vol up. unlock (wipe phone)
Reboot connect internet to remove RMM (vaultkeeper) & enable oem unlock again

1. TWRP: Fastboot: Odin Flash TWRP .tar latest from corsicanu (AP) + Avbmeta .tar (CP)
(disable auto reboot)
https://twrp.me/samsung/samsunggalaxys10e.html
https://downloads.corsicanu.ro/samsung/vbmeta-27.10.2020/
After flash finish. Press vol up + bixby + power to force boot straight in TWRP

2. TWRP: Wipe Format data + flash multidisabler zip (to disable encryption/security)
https://forum.xda-developers.com/ga...ynos/g97xf-multi-disabler-encryption-t3919714

3. Install latest bootloader (corsicanu): in Fastboot Odin .tar (BL) or TWRP zip
https://github.com/corsicanu/9820-bootloaders_and_modems

Is bootloader flash necessary now? or before TWRP?

4. Flash BlastUI Rom ZIP in twrp

5. (optional) safetynet fix + thundertweaks app

 

[FabienGege]

@Blast752 pouvez-vous envisager de mettre à jour vos instructions d'installation en utilisant celles ci-dessous.
Je pense que c'est plus clair et plus facile à comprendre car il m'a fallu beaucoup de temps pour comprendre le vôtre.
vous pouvez y apporter quelques modifications.
Je pense que cela aidera parce que beaucoup de gens semblent avoir le bootloop. peut-être qu'ils ne suivent pas les bonnes étapes

0. Déverrouiller le chargeur de démarrage
Démarrage rapide. appuyez longuement sur le volume vers le haut. déverrouiller (effacer le téléphone)
Redémarrez, connectez-vous à Internet pour supprimer RMM (vaultkeeper) et réactivez le déverrouillage OEM

1. TWRP : Fastboot : Odin Flash TWRP .tar le plus récent de corsicanu (AP) + Avbmeta .tar (CP)
(désactiver le redémarrage automatique)
https://twrp.me/samsung/samsunggalaxys10e.html
https://downloads.corsicanu.ro/samsung/vbmeta-27.10.2020/
Après la finition flash. Appuyez sur vol up + bixby + power pour forcer le démarrage directement dans TWRP

2. TWRP : Wipe Format data + flash multidisabler zip (pour désactiver le cryptage/la sécurité)
https://forum.xda-developers.com/ga...ynos/g97xf-multi-disabler-encryption-t3919714

3. Installez le dernier bootloader (corsicanu) : dans Fastboot Odin .tar (BL) ou TWRP zip
https://github.com/corsicanu/9820-bootloaders_and_modems

Le flash du chargeur de démarrage est-il nécessaire maintenant ? ou avant TWRP ?

4. Flash BlastUI Rom ZIP en twrp

5. (facultatif) correctif du filet de sécurité + application Thundertweaks

I followed scrupulously step by step exactly but it does not give me anything. Still inactive and black screen with the possibility of flashing twrp and accessing download mode, but that's it.
I don't know what's wrong ..
is it because I own the G973F / DS?
normally with odin I can catch up with this and flash the Samsung firmware and start over but I am stuck with a black screen that does not react if we want to turn it on normally

 

[Blast752]

Good morning !
thanks for sharing and working for our Samsung

sm-g973F/DS

I tried to install the kernel and the rom but I am in a situation where the phone does not react anymore when I want to boot it normall
I can only access in download or twrp mode
The classic start does not react
I tried flashing the official Samsung rom via odin, and tried to install the BLASTUI rom several times but nothing works
I proceeded like this on
twrp (latest version) and vbmeta via odin
I deleted the data, and the custom rom that I had
then I flashed the multidisiabler then the bl and finally the rom
but then impossible to start it normally
the phone does not react and remains black
what should i do please?

yeah bro latest magisk canary problem, tomorrow i will upload a version with downgraded magisk (v23 stable)

 

[Blast752]

@Blast752 can you please consider update your installation instructions using my one below.
I think it's more clear & easy to understand because it took me long time to understand your one.
you could make some changes to it.
I think it will help because lot people seem to get bootloop. maybe they dont follow the right steps

0. Unlock bootloader
Fastboot. long press vol up. unlock (wipe phone)
Reboot connect internet to remove RMM (vaultkeeper) & enable oem unlock again

1. TWRP: Fastboot: Odin Flash TWRP .tar latest from corsicanu (AP) + Avbmeta .tar (CP)
(disable auto reboot)
https://twrp.me/samsung/samsunggalaxys10e.html
https://downloads.corsicanu.ro/samsung/vbmeta-27.10.2020/
After flash finish. Press vol up + bixby + power to force boot straight in TWRP

2. TWRP: Wipe Format data + flash multidisabler zip (to disable encryption/security)
https://forum.xda-developers.com/ga...ynos/g97xf-multi-disabler-encryption-t3919714

3. Install latest bootloader (corsicanu): in Fastboot Odin .tar (BL) or TWRP zip
https://github.com/corsicanu/9820-bootloaders_and_modems

Is bootloader flash necessary now? or before TWRP?

4. Flash BlastUI Rom ZIP in twrp

5. (optional) safetynet fix + thundertweaks app

ok bro thanks

 

[Blast752]

I followed scrupulously step by step exactly but it does not give me anything. Still inactive and black screen with the possibility of flashing twrp and accessing download mode, but that's it.
I don't know what's wrong ..
is it because I own the G973F / DS?
normally with odin I can catch up with this and flash the Samsung firmware and start over but I am stuck with a black screen that does not react if we want to turn it on normally

change kernel or use stock one, latest magisk canary versions gives problems with samsung atm

 

[FabienGege]

ouais bro dernier problème magisk canary, demain je téléchargerai une version avec magisk rétrogradé (v23 stable)

Will it be a zip flashed via twrp?

In your opinion why this blocked with my Samsung (SM-G973F / DS).

THANKS SO MUCH FOR SHARING YOUR KNOWLEDGE!

 

[FabienGege]

changer le noyau ou utiliser un stock, les dernières versions de magisk peuvent résoudre des problèmes avec samsung atm

I will go through the process by changing the kernel several times.
staying of course with the g973 kernels.
I'll keep you informed .
thank you for your speed

 

[fatjoez]

I will go through the process by changing the kernel several times.
staying of course with the g973 kernels.
I'll keep you informed .
thank you for your speed

Did you change kernel? Problem fixed?
If it fix please share instructions & link kernel used

 

[FabienGege]

Did you change kernel? Problem fixed?
If it fix please share instructions & link kernel used

Hello .
I tried several different kernels in g973F ..... some wont flash others yes, but that didn't fix the problem.

I still now have access to the loading screen when the phone is off, but I still can't turn it on.
only download mode and i can flash twrp to access it but that's it.

 

[FabienGege]

I succeeded !! My phone works after several days of hard work !!!

I am very happy!

I followed fatjoez's links for vmbeta and multidisiabler and it worked!

Many thanks for the links !!
resolu .

 

[FabienGege]

J'ai réussi !! Mon téléphone fonctionne après plusieurs jours de travail acharné !!!

Je suis très heureux!

J'ai suivi les liens de fatjoez pour vmbeta et multidisiabler et ça a marché !

Merci beaucoup pour les liens !!
résolu.

 

[FabienGege]

The rom and excellent but the phone restarts itself

 

[fatjoez]

I succeeded !! My phone works after several days of hard work !!!

I am very happy!

I followed fatjoez's links for vmbeta and multidisiabler and it worked!

Many thanks for the links !!
resolu .

great

can you please post the exact instructions for how you fix it so other people can recover too?

which steps did you follow & which buttons pressed ~~

 

[FabienGege]

Start in download mode via the volume button - and bixby while plugging it into my pc.



I flashed the last twrp and the Vmbeta with Fat Joez links (disable reboot on Odin)



Then volume - bixby and power then once the screen is off volume + bixby and power at the same time.

On twrp Factory data reset.



Flashed multidisiabler to twrp, reboot to twrp.

Then flash the rom, wipe data and reboot the system