[ROM][sGSI][10.0][Unofficial] Resurrection Remix Q 8.6.4

[Ilaska33]

What is the command line on fastboot that I should use? on the internet, everyone installs LOS with TWRP! am confused and stuck ...

 

[rafyvitto]

What is the command line on fastboot that I should use? on the internet, everyone installs LOS with TWRP! am confused and stuck ...

I never said to use fastboot, i was asking if you had flash it that way...., what i am saying is flash it in twrp and FORMAT DATA it is very important you do not miss this step!, if you don't do this los16 wont boot or any of my sGSI's roms.

 

[Ilaska33]

I never said to use fastboot, i was asking if you had flash it that way...., what i am saying is flash it in twrp and FORMAT DATA it is very important you do not miss this step!, if you don't do this los16 wont boot or any of my sGSI's roms.

Sorry, I did not understand ...,
I have with TWRP
Unlock Bootloader OK
Boot into recovery OK
Make Sure you have already flashed Unjustified Devs Los16 rom. OK
Go to install/select install image/look for sGSI image/select system/swipe to flash. OK

I wanted to reboot in recovery to install SHRP but it was bootloop ... I probably had to factory reset before
I try again without reboot

 

[Ilaska33]

//

 

[rafyvitto]

SHRP i have to flash to boot? allright?

yes to boot partition.

 

[Ilaska33]

Well, I'm too bad, I did everything and it does not work ... it bootloop

 

[rafyvitto]

Well, I'm too bad, I did everything and it does not work ... it bootloop

Did you FORMAT DATA?, not factory reset, has to be format data, also join my telegram channel i can help you there better, the link is in main post.

 

[Ilaska33]

Did you FORMAT DATA?, not factory reset, has to be format data, also join my telegram channel i can help you there better, the link is in main post.

Hello Rafyvitto,
I have with TWRP
Unlock Bootloader OK
Boot into recovery OK
Make Sure you have already flashed Unjustified Devs Los16 rom. OK
ERASE DATA/ FORMAT SYSTEM/DATA/CACHE
Go to install/select install image/look for sGSI image/select system/swipe to flash. OK
repair system OK
BOOT = BOOTLOOP

where i wrong??

 

[Ilaska33]

I finally succeeded thanks Rafyvitto

 

[rafyvitto]

I finally succeeded thanks Rafyvitto

Good im glad you finally were able to do it!, enjoy =]

 

[Jonster111]

Just a quick question, as I want to install this ROM on my A10 Pro:
Even if I want to use the Android 10 Version of this ROM, I still need to install LOS 16 (Android 9) before?

Thanks for the help

 

[rafyvitto]

Just a quick question, as I want to install this ROM on my A10 Pro:
Even if I want to use the Android 10 Version of this ROM, I still need to install LOS 16 (Android 9) before?

Thanks for the help

Yes you do because los16's vendor/boot img combo is the best we got for GSI compatibility.

 

[Jonster111]

Hi again,
sorry to annoy you, but I cant figure out how to install this ROM.
I already unlocked my bootloader a year ago and since then I was on a stock based ROM/MOD from a german/russian forum called dimkin_MOD.

Which steps do i need to take in order to install the resurrection ROM?

I cant get into fastboot mode. I was always working with this EDL Tool. But there I cant figure out how just flash the SHRP recovery in order to install LOS16 and then install RR.

Could you please help me?

Many thanks in advance.

 

[rafyvitto]

Hi again,
sorry to annoy you, but I cant figure out how to install this ROM.
I already unlocked my bootloader a year ago and since then I was on a stock based ROM/MOD from a german/russian forum called dimkin_MOD.

Which steps do i need to take in order to install the resurrection ROM?

I cant get into fastboot mode. I was always working with this EDL Tool. But there I cant figure out how just flash the SHRP recovery in order to install LOS16 and then install RR.

Could you please help me?

Many thanks in advance.

For shrp unlockbootloader first, boot into fastboot mode by long pressing vol up/down for a couple of seconds, once there, download shrpboot.img, then flash it with this command from cmd "fastboot flash boot location/of/shrpboot.img"

RR flashing instructions are in the first post very detailed, let me know if you get lost in any step.

 

[Jonster111]

For shrp unlockbootloader first, boot into fastboot mode by long pressing vol up/down for a couple of seconds, once there, download shrpboot.img, then flash it with this command from cmd "fastboot flash boot location/of/shrpboot.img"

RR flashing instructions are in the first post very detailed, let me know if you get lost in any step.

Hi,

I don't know what is going on with my device...

As I said I am on Android 10 with unlocked bootloader but with a modified ZTE ROM. I read somewhere, that with ZTE android 10 you can' boot into fastboot anymore. Is this true?

When I press the different vol-buttons I get the following results:
VOL UP + Power = ZTE Recovery
VOL Down + Power = FTM (Factory Test Mode)
VOL UP + DOWN + Power = safe mode

But with none of them I can "fastboot flash boot ..." the recovery.

Do you have a tutorial to flash back to ZTE Android 9 and then doing everything from the very start?

 

[_ron_]

could finally install this ROM, unfortunately VoLTE seems not working (O2 Germany) I also tried to change IMS feature settings. Did someone enable encryption, I hade some issues with SHRP to mount encrypted Los16 data partition.

 

[eKeith]

Hi,



I don't know what is going on with my device...



As I said I am on Android 10 with unlocked bootloader but with a modified ZTE ROM. I read somewhere, that with ZTE android 10 you can' boot into fastboot anymore. Is this true?



When I press the different vol-buttons I get the following results:

VOL UP + Power = ZTE Recovery

VOL Down + Power = FTM (Factory Test Mode)

VOL UP + DOWN + Power = safe mode



But with none of them I can "fastboot flash boot ..." the recovery.



Do you have a tutorial to flash back to ZTE Android 9 and then doing everything from the very start?

Yes, on A10 we cannot get to fastboot. However, there is a solution coming...
@bobthenormal is updating his EDL tool. This will help us backup the device then flash A9 from where we can then move on to Rafy's ROMs.

Sent from my PH-1 using Tapatalk

 

[Jonster111]

Yes, on A10 we cannot get to fastboot. However, there is a solution coming...
@bobthenormal is updating his EDL tool. This will help us backup the device then flash A9 from where we can then move on to Rafy's ROMs.

Sent from my PH-1 using Tapatalk

Hi, thanks for the confirmation.

But isn't there another way? I tried to flash the update zip from ZTE with Android 9 via SD-Card, but it always fails.
I don't really care about the data of my phone, as I did a backup with titanium and everything else is in the cloud.

If someone has any (please a little bit more detailed) idea, I would be very thankful.

 

[rafyvitto]

could finally install this ROM, unfortunately VoLTE seems not working (O2 Germany) I also tried to change IMS feature settings. Did someone enable encryption, I hade some issues with SHRP to mount encrypted Los16 data partition.

Install this ims.apk, unsure about shrp data encryption, i disable encryption always, go on my telegram channel and ask daysun he is the maintainer of shrp.

 

[rafyvitto]

Hi, thanks for the confirmation.

But isn't there another way? I tried to flash the update zip from ZTE with Android 9 via SD-Card, but it always fails.
I don't really care about the data of my phone, as I did a backup with titanium and everything else is in the cloud.

If someone has any (please a little bit more detailed) idea, I would be very thankful.

Join my telegram channel, we have members that have already successful downgraded to android 9.