• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][Signature Spoofing]LineageOS 18.1 for S10E/S10/S10+ Exynos

Search This thread

Ivan_Meler

Recognized Developer
New builds are up with July 2021 security update here is a brief changelog
- Merged July 2021. Security update
- Performance and stability improvements
- Changed sensors handling in doze mode to prevent battery drain
- Synced with LOS source

Unfortunately some bigger changes didnt make it into this build as i was on vacation last month and didnt touch android too much (Keep in mind i do this in my free time) but they will be out soon

As always big thanks to everyone who donated because it helps pay for the build server cost and keep the project alive.
Enjoy new build and stay safe
 

mecaskey

Member
Jan 1, 2011
20
5
Berlin
New builds are up with July 2021 security update here is a brief changelog
- Merged July 2021. Security update
- Performance and stability improvements
- Changed sensors handling in doze mode to prevent battery drain
- Synced with LOS source

Unfortunately some bigger changes didnt make it into this build as i was on vacation last month and didnt touch android too much (Keep in mind i do this in my free time) but they will be out soon

As always big thanks to everyone who donated because it helps pay for the build server cost and keep the project alive.
Enjoy new build and stay safe
Thanks so much!

On this build install, I had a glitch w/magisk. Had to redo the adjustments for Safety Net. Otherwise seems awesome, per usual.
 

fil3s

Senior Member
Aug 30, 2014
1,306
184
42
bendigo
www.mobiledevices.cc
New builds are up with July 2021 security update here is a brief changelog
- Merged July 2021. Security update
- Performance and stability improvements
- Changed sensors handling in doze mode to prevent battery drain
- Synced with LOS source

Unfortunately some bigger changes didnt make it into this build as i was on vacation last month and didnt touch android too much (Keep in mind i do this in my free time) but they will be out soon

As always big thanks to everyone who donated because it helps pay for the build server cost and keep the project alive.
Enjoy new build and stay safe

😁 Thanks for the great Rom. I did however get a bootloop. I installed the .zip, gApps, wiped cache\dalvik and installed the patched boot image to boot

Ended up clean flashing. I did have Riru and Lsposed installed. Any ideas??

Thanks
 

ioeg41

Member
Apr 13, 2021
17
0
I haven't found Magisk20.4 boot image. I want to compile boot.image, but I have limited ability. I don't know where the problem is.
Code:
bootinfo.txt  1kb
boot-old.img    43,557kb
cpiolist.txt   0kb
dt_image   1kb
kernel   43,553kb
ramdisk   0kb
arguments: [ramdisk file] [directory]
ramdisk file: ramdisk
directory: initrd
output: cpiolist.txt
Traceback (most recent call last):
  File "<string>", line 2213, in <module>
  File "<string>", line 1964, in unpack_ramdisk
IOError: invalid ramdisk
If there is no Magisk20.4, LineageOS 18 will lack important functions, so I hope someone can provide Magisk20.4 boot image, thank you!
 
Last edited:

ioeg41

Member
Apr 13, 2021
17
0
Magisk

Magisk boot images are provided in this google drive folder named beyond*lte-boot-magisk.img you can flash them on boot slot and install magisk manager, No need to worry about rebooting to recovery or not having TWRP and magisk at the same time, Just make sure you dont try to boot to system with magisk patched TWRP as that might cause issues but as long as you have stock twrp and have flashed beyond*lte-boot-magisk.img image to boot slot you are fine, Source for given kernel is available at GitHub if you want to compile kernel yourself just run source build.sh devicename e.g. source build.sh beyond2lte, It will produce new boot image in build/ folder, To update magisk you can follow instructions given at this commit enjoy

Do note that you will have to reflash magisk boot image when updating rom
Use the MAGISK23 to boot the image error and you cannot install all modules.
magisk_install_log:
Code:
- Copying zip to temp directory
- Installing riru-v25.4.4-release.zip
*******************************
 Please install Magisk v19.0+!
*******************************
! Installation failed
- Copying zip to temp directory
- Installing EdXposed-v0.5.2.2_4683-master-release.zip
*******************************
 Please install Magisk v20.4+!
*******************************
! Installation failed
...
make sure you followed instructions closely
1. Download recovery image
2. Download magisk canary app and patch recovery image
3. Flash magisk patched recovwry image (lineage recovery) to recovery partition
4. reboot and hold key combination for recovery until first warning screen shows up, after that release key combo
5. you should be in system with root

if you need further assistance im sure someone from telegram group can help you a bit more
How to fix MAGISK yourself, What boot.img or recovery.Image is used?
 

Quinquadrate

New member
Dec 25, 2019
4
0
Just installed this ROM today, does anyone know how to set the screen to a lower resolution?

By default the screen on my s10+ is set to 1440x3040, to get the UI to look right, I have changed the display size (Settings > Display > Display size) to "largest", but it still looks messy in some apps and the screen consumes more battery life.

I have already tried running the command "adb shell wm size 1080x2280" through adb. Although it worked, it made the taskbar too big and hid the icons under the display cutout. I eventually managed to reset this with "adb shell wm size reset" and am currently using the screen at 1440x3040 with high display size (as described above).

Is there any way I can resize the display or fix the status bar when the screen is set to 1080x2280.
 

Zentori

Member
Aug 31, 2009
46
6
I managed to dirty flash over previous release seems that without glitches, retaining config, apps and root. Thanks!

Only thing I really miss is Android Auto. I tried with OpenGApps instead of NikGApps with no joy, copying AndroidAutoStubPrebuilt.apk to priv-app also without luck... Any help is really welcome.
 

Zentori

Member
Aug 31, 2009
46
6
NikGApps with integrated Android Auto worked for my on my S10.
Didn't know about addons for NikGApps. 🤦

I tried cleaning OpenGApps scripts, dirty flash ROM, NikGApps, Android Auto addon and Magisk on boot partition, but my car still does nothing when connecting cable.

Maybe I made too much changes in my system partition trying to make it work before realizing there were this addon. I'll try cleaning Google Play and system partitions traces of Android Auto and retrying dirty flash again. Thank you.
 

Yogi555

Member
Jul 21, 2021
16
5
Didn't know about addons for NikGApps. 🤦

I tried cleaning OpenGApps scripts, dirty flash ROM, NikGApps, Android Auto addon and Magisk on boot partition, but my car still does nothing when connecting cable.

Maybe I made too much changes in my system partition trying to make it work before realizing there were this addon. I'll try cleaning Google Play and system partitions traces of Android Auto and retrying dirty flash again. Thank you.
Good luck!
The settings of the Android Auto Playstore app is having a button to connect to the car. In the car a popup for the connection should appear. It was a while of fiddling around for me as well, until it succeeded. Not sure if it matters - I had my S10 already connected via bluetooth to the car for phone and contacts when I started to establish the Android Auto connection by USB cable.
 

woaloo

Retired Forum Moderator
Jun 23, 2006
449
44
Fairphone
Samsung Galaxy S10e
Hi, I've install this rom with TWRP and MicroG. Everything is quite fine except Bixby button is not working anymore.
I've tried an app to remap bixby (Keyboard/Button Mapper on F-Droid), but when I press the button, it is not detected.
Any ideas ?
Thanks
 

M1schu1989

Member
Sep 2, 2016
5
1
@Ivan_Meler Hey thank you for the august update! As always good work! Do you think there is chance you find some time to look into the BT calls issue? The device literaly ignores the connected airpods and use the device speakers and mic during calls.

Thanks in advance!
 

Stamzrat10

Member
Nov 28, 2020
28
7
The official LineageOS version for the Samsung Galaxy S10, S10+ and S10e is available since Thursday. Does anyone know when the official LineageOS for MicroG version will be available at https://download.lineage.microg.org/beyond2lte/ ?

According to the FAQ, they "build LineageOS for microG for every device supported by LineageOS". But it is not available yet.
What's the difference between Ivan's rom and the official lineage rom? I've been using Ivan's for very long and am pretty happy with it. Are there fixes there or new functions?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 25
    k5tUT1V.png

    LineageOS 18.1 for Galaxy S10 Series

    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */


    Working:
    - Wifi
    - Sound
    - mali drivers
    - USB tethering
    - Video Playback
    - Fingerprint Sensor
    - Ril (Mobile data,calls, sms and stuff)
    - Sensors
    - Bluetooth
    - Wifi HotSpot
    - MTP
    - 2D and 3D gpu acceleration
    - HW encoding/decoding
    - GPS
    - Cameras (All of them)
    - HWcomposer (HWC)
    - Signal indicator
    - Double tap to wake
    - Wireless PowerShare

    Not Working
    - VoLTE and VoWiFi will not be implemented (for now) as they heavily depand on samsungs framework


    To properly report a bug (Please dont report things already on the Not Working list)
    a) Logcat
    b) /proc/last_kmsg (or /proc/kmsg)
    c) /data/tombstones
    d) dmesg

    Please do not report bugs if you have performed any system modifications excluding gapps installation



    Installation instructions


    Make sure you are on Q stock firmware (All of the Q firmwares are tested and confirmed to be working, This should be the case with new fws too as long as Samsung doesnt significantly change bootloader trustzone bits)
    Download Q twrp from this thread
    flash twrp as per given instructions
    if you are coming from stock and have encryption enabled format data (Note i said format, Wiping it in twrp is not the same as formating it)
    wipe cache, dalvik cache and system
    flash LineageOS
    If you want to have gapps flash them right after flashing the rom before first booting
    Reboot the device

    Downloads:

    Google Drive
    Mega.nz

    (Select build coresponding to your devices codename, S10e = beyond0lte | s10 = beyond1lte | s10+ = beyond2lte)

    sha256 checksums

    Code:
    8352d13d6f9528e8bef750d7373a878536604e76c8a157efcaf78a659e5a3e63  lineage-18.1-20210909-UNOFFICIAL-beyond2lte.zip
    3f4ddb2c0095098a506784b3541dd0bcd8633f2fa9266cef42147a1b263e5473  lineage-18.1-20210909-UNOFFICIAL-beyond1lte.zip
    7753fab1fa5ada67036c23b424b5f782ebc20506cc86aa8d3dae63a2f9ffba2a  lineage-18.1-20210909-UNOFFICIAL-beyond0lte.zip


    If you need general help or questions feel free to join Telegram group
    READ BEFORE INSTALLING MAGISK
    Gapps

    I do this in my free time so bear that in mind when you notice I didn't fix known bug in next available build, Currently i work on this alone and i am not one of those kangers that just copy source and claim it as their own work,
    if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler



    Due to requests from some users I added signature spoofing support to the rom which allows usage of MicroG
    you can simply install MinMicroG and grant it needed permissions for signature spoofing to make it work as intended


    Based On Android R
    Changelog

    10.09.2021.
    - Merged September 2021. Security update
    - Synced with LOS source

    06.08.2021.
    - Merged August 2021. Security update
    - Synced with LOS source

    10.07.2021.
    - Merged July 2021. Security update
    - Performance and stability improvements
    - Changed sensors handling in doze mode to prevent battery drain
    - Synced with LOS source

    10.06.2021.
    - Merged June 2021. Security update
    - Synced with LOS source

    06.05.2021.
    - Added wifi and portable hotspot overlays
    - Merged May 2021. Security update
    - Synced with LOS source

    08.04.2021.
    - Fixed USB C audio input/output
    - Fixed charging with device powered off (It also has nice new animation now)
    - Merged April 2021. Security update
    - Misc performance and stability improvements
    - Synced with LOS source

    08.03.2021.
    - Added signature spoofing support
    - Synced with LOS source

    05.03.2021.
    - Merged March 2021. Security update
    - Performance and stability improvements
    - Synced with LOS source

    06.02.2021.
    - Merged February 2021. Security update
    - Misc performance and stability improvements
    - Modernized AdvancedDisplay app codebase
    - Cleaned up the source
    - Updated magisk boot images
    - Synced with LOS source

    06.01.2021.
    - Merged January 2021. Security update
    - Fixed OpenGapps installation from lineage recovery
    - Fixed features that broke with initial 18.1 merge
    - Misc performance and stability improvements
    - Synced with LOS source

    09.12.2020.
    - Merged December 2020. security update
    - Merged December 2020 feature drop
    - Merged S9DTK9 vendor blobs
    - Switched to full vndk30 vendor
    - Fixed ADB inside of lineage recovery
    - Improved brightness handling even more
    - Performance and stability improvements
    - Updated recovery images provided in 3rd post
    - Synced with LOS source

    10.11.2020.
    - Further improved auto brightness handling
    - Merged November 2020. security update
    - Performance and stability improvements
    - Updated recovery images provided in 3rd post
    - Synced with LOS source

    03.11.2020.
    - Fixed issues with overlays and s10 camera cutout
    - Enabled access to fingerprint for apps that were looking for secure biometics device (e.g. paypal)
    - Improved automatic brightness handling (Switched to calibrated sensor virtual device which calculates brightness more precisely)
    - Pinned SystsemUI and SurfaceFlinger to ram to imrpove responsivness
    - Added blur to dropdrown notifications panel
    - Enabled device controls from power menu
    - Synced with LOS source
    - Misc performance improvements

    22.10.2020.
    - Merged october security update
    - Added back mDNIe display tuning options
    - Added back a lot of previously non working los features
    - Misc performance and stability improvements
    - Synced with los source

    07.10.2020.
    - Initial public release



    XDA:DevDB Information
    [ROM] LineageOS 18.0 for S10E/S10/S10+ Exynos , ROM for the Samsung Galaxy S10

    Contributors
    Ivan_Meler
    Source Code: https://github.com/ivanmeler/android_kernel_samsung_beyondlte/tree/lineage-18.0

    ROM OS Version: 11.0

    Version Information
    Status:
    Stable

    Created 2020-10-07
    22
    Magisk

    Magisk boot images are provided in this google drive folder named beyond*lte-boot-magisk.img you can flash them on boot slot and install magisk manager, No need to worry about rebooting to recovery or not having TWRP and magisk at the same time, Just make sure you dont try to boot to system with magisk patched TWRP as that might cause issues but as long as you have stock twrp and have flashed beyond*lte-boot-magisk.img image to boot slot you are fine, Source for given kernel is available at GitHub if you want to compile kernel yourself just run source build.sh devicename e.g. source build.sh beyond2lte, It will produce new boot image in build/ folder, To update magisk you can follow instructions given at this commit enjoy

    Do note that you will have to reflash magisk boot image when updating rom
    17
    New build with security February update is out here is a brief changelog

    - Merged February 2021. Security update
    - Misc performance and stability improvements
    - Modernized AdvancedDisplay app codebase
    - Cleaned up the source
    - Updated magisk boot images
    - Synced with LOS source

    Big thanks to everyone who supported this project as it wouldnt be possible to keep it up without them (Donations help cover the build server cost as android can be resoruce hungry to compile)
    15
    New builds with january security update are out here is a brief changelog

    - Merged January 2021. Security update
    - Fixed OpenGapps installation from lineage recovery
    - Fixed features that broke with initial 18.1 merge
    - Misc performance and stability improvements
    - Synced with LOS source

    Unfortunately due to recent events i didnt have time to implement all features like signature spoofing as some requested but ill try to do that in a next few days hopefuly
    Big thanks to everyone who supported this project as their donations help cover the build server cost
    15
    New builds are up (Lineage version number has been bumped to 18.1 because of pixel feature drop and s10 is one of first devices to get those builds so enjoy)
    Here is a brief changelog


    - Merged December 2020. security update
    - Merged December 2020 feature drop
    - Merged S9DTK9 vendor blobs
    - Switched to full vndk30 vendor
    - Fixed ADB inside of lineage recovery
    - Improved brightness handling even more
    - Performance and stability improvements
    - Updated recovery images provided in 3rd post
    - Synced with LOS source

    Big thanks to everyone who supported this project so far astheir donations help keep pay for the build server