[ROM] SM-T820 TWEAKED....................[rom] sm-t820 tweaked

[NYCgirl]

Unpack the tweaked rom zip file, and flash the boot image that is in there in twrp, then flash magisk after that, it will work

You mean the "boot.img" file from "SM+T820+ARA2+TWEAKED+2.0+by+rorymc928". But isn't that file already modified? Isn't that why Magisk refuse to install, saying that the image is already patched by another program?

 

[king3opobn]

You mean the "boot.img" file from "SM+T820+ARA2+TWEAKED+2.0+by+rorymc928". But isn't that file already modified? Isn't that why Magisk refuse to install, saying that the image is already patched by another program?

Yes, that one, flash as image in twrp, it's not modified, supersu is installed after rom flashes when you install tweakedRom

Sent from my SM-G935F using XDA Labs

 

[NYCgirl]

Thanks! I'll try and let everyone's know. I bet a lot of people like Magisk!

---------- Post added at 02:39 PM ---------- Previous post was at 02:33 PM ----------

Yes, that one, flash as image in twrp, it's not modified, supersu is installed after rom flashes when you install tweakedRom

Thanks! Do I need to uninstall SuperSU first, or just flash the boot.img and then magisk? If I have to uninstall SuperSU, should I do it through the SuperSU app (the interface)?

 

[king3opobn]

Thanks! I'll try and let everyone's know. I bet a lot of people like Magisk!

---------- Post added at 02:39 PM ---------- Previous post was at 02:33 PM ----------



Thanks! Do I need to uninstall SuperSU first, or just flash the boot.img and then magisk? If I have to uninstall SuperSU, should I do it through the SuperSU app (the interface)?

Yes, It doesn't hurt to flash it, but i think magisk 16 clears those files

Sent from my SM-G935F using XDA Labs

 

[NYCgirl]

How to install SM-T820 Tweaked with Magisk

1. Extract boot.img from the ROM (SM+T820+ARA2+TWEAKED+2.0+by+rorymc928)
2. Run a complete backup
3. Reboot into recovery
4. Wipe data, dalvik and cache (factory reset)
5. Install the ROM
6. Now you have a working device with SuperSU. To replace it with Magisk, read on.
7. Install boot.img
8. Install Magisk
9. Wipe cache
10. Reboot!

 

[king3opobn]

1. Extract boot.img from the ROM (SM+T820+ARA2+TWEAKED+2.0+by+rorymc928)
2. Run a complete backup
3. Reboot into recovery
4. Wipe data, dalvik and cache (factory reset)
5. Install the ROM
6. Now you have a working device with SuperSU. To replace it with Magisk, read on.
7. Install boot.img
8. Install Magisk
9. Wipe cache
10. Reboot!

Should make a post on it since it'll get lost in comments, like this


https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t820-tweaked-t3659433/post75168063

Sent from my SM-G935F using XDA Labs

 

[king3opobn]

Here

 

[rorymc928]

1. Extract boot.img from the ROM (SM+T820+ARA2+TWEAKED+2.0+by+rorymc928)
2. Run a complete backup
3. Reboot into recovery
4. Wipe data, dalvik and cache (factory reset)
5. Install the ROM
6. Now you have a working device with SuperSU. To replace it with Magisk, read on.
7. Install boot.img
8. Install Magisk
9. Wipe cache
10. Reboot!

New version 2.0 tweaked posted to first post, if it's any use to you now

 

[rorymc928]

By popular demand,


*************************
Version 2.0 with magisk
*************************

https://androidfilehost.com/?fid=890129502657589509

Will dirty flash over tweaked 2. 0


Please visit magisk forum here for magisk details
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

 

[rorymc928]

SM-T820 TWEAKED 2.1

Based on stock ARA2 firmware/version 2.0



Now with 3minit battery mod
Xposed installer
Gravity box exposed module

Thanks to....

rovo89 and xposed, forum link below
https://forum.xda-developers.com/xposed/xposed-installer-versions-changelog-t2714053

C3C076 and gravity box
https://forum.xda-developers.com/xposed/modules/app-gravitybox-v7-0-0-tweak-box-android-t3653953

gharrington and 3minit battery mod, please visit for a full explanation of its functions
https://forum.xda-developers.com/showthread.php?t=2799958



*********************************************
Version 2.1 super user + 3minit battery mod
*********************************************

https://androidfilehost.com/?fid=746010030569961124

To set up,
1. open app xposed installer (pre installed),
2. Tap on install /update ... Version....
Follow the instructions, no need to go to recovery, works fine directly, it then requires reboot.
3. After reboot open exposed installer again, it will show green as installed/may require selection of on switch first.
4. Use the menu, top left to open modules, this should show gravity box, tick the switch to activate, requires reboot again
5. Open gravity box from app or within xposed to app via menu, for further selection
6. You can remove the extra stock battery icon from within gravity box status bar settings

Gravity box allows a large number of mods to the system most active without reboot, some/a few won't work.
Clock configuration /status bar colours do function as intended

PS. for those not wanting to use exposed, there are apps available for removing the stock battery

3minit battery,
Large number of battery styles and colours available through the app,


Let me know how it works for you

 

[king3opobn]

Is there any benefit to updating to 2.1 if i already have those mods installed?
I'm on 2.0
Sent from my SM-G935F using XDA Labs

 

[[email protected]]

any Chace of getting tweak 2.1 with magisk?

 

[jd1639]

any Chace of getting tweak 2.1 with magisk?

You need twrp to flash this so you should be able to flash magisk in twrp. I haven't done this but what I'd do is flash this room. Then format data. Then flash magisk zip then ashyx's no-verity-no-encrypt zip. You can install the magisk apk after boot up. Do this at your own risk. Worse case is you'd have to Odin stock firmware and start all over again. As usual backup anything you want to keep prior to doing anything.

Sent from my [device_name] using XDA-Developers Legacy app

 

[king3opobn]

You need twrp to flash this so you should be able to flash magisk in twrp. I haven't done this but what I'd do is flash this room. Then format data. Then flash magisk zip then ashyx's no-verity-no-encrypt zip. You can install the magisk apk after boot up. Do this at your own risk. Worse case is you'd have to Odin stock firmware and start all over again. As usual backup anything you want to keep prior to doing anything.

Proper instructions for flashing magisk.are already in the comments a few times.

Sent from my SM-G935F using XDA Labs

 

[rorymc928]

Is there any benefit to updating to 2.1 if i already have those mods installed?
I'm on 2.0

No, no other changes to the rom

 

[rorymc928]

any Chace of getting tweak 2.1 with magisk?

Front page Version 2.1 magisk+ 3minit battery mod

Uploading, looks like it will be about an hour

 

[rorymc928]

OK, links up,

******************************************
Version 2.1 magisk + 3minit battery mod
******************************************
Temporarily pulled, while I check some issues

 

[rorymc928]

Ok uploading altered version of 2.1magisk. This will require factory reset,so start backing up.
1. If you have xposed installed,either select it off in the app or uninstall, I only selected it off.
2. Boot to TWRP
3. Go to wipe,and select factory data reset.
4. Install ROM
5. Long boot........,
6. Ignore the xposed force close
7. Do your normal startup load.
8. Magisk will function at this point
9. If you wish to operate xposed as well,go to the xposed installer app(magisk version preinstalled),open it and install the framework,which will be systemless. Non recovery installation works fine. It will require reboot.
10. Magisk will pass safetynet check whilst xposed is selected off by its switch,otherwise it indicates fail. So you can swap, as needed by work perhaps.


Internal SD storage should remain , but back up all you rely on ,just in case .

****Your choice if you dont want xposed at all,either dont set it up or freeze it in app settings****

[**********************************************
Version 2.1m2 magisk + 3minit battery mod
***********************************************

https://androidfilehost.com/?fid=746010030569962690

 

[HACK3DANDR0ID]

I'm coming over to the new TWEAKED 2.1 build from the Unofficial LOS from 3/1/18. Lineage OS required a different version of TWRP (v3.2.1) from the ashyx version. Does it matter which TWRP i use? In the Lineage OS thread, the DEV stated "Unfortunately Twrp from @ashyx doesn't work here because of incorrect links to partitions in recovery." Now is that just for Lineage OS and ashyx's is meant for stock/tweaked builds?

 

[rorymc928]

I'm coming over to the new TWEAKED 2.1 build from the Unofficial LOS from 3/1/18. Lineage OS required a different version of TWRP (v3.2.1) from the ashyx version. Does it matter which TWRP i use? In the Lineage OS thread, the DEV stated "Unfortunately Twrp from @ashyx doesn't work here because of incorrect links to partitions in recovery." Now is that just for Lineage OS and ashyx's is meant for stock/tweaked builds?

If the partitions have changed I would expect they won't be correct for stock,. If you are changing back you would need to do the change in the same session, to be safest. Odin flash stock twrp, boot into new stock twrp then flash this ROM. Someone may correct me on that, but I suspect it would be the safest.
Did they give a reason for changing the partitions?