SM-T825 TWEAKED 5.1 ***** PIE ***** 20JUN2020
T825_CTD1_TWEAKED_5.1_DB4_by_rorymc928
Based on latest stock CTD1 firmware
Tweaked, stable, zip aligned. SU/D
Forced encryption disabled
Deknoxed
Debloated
(GPU driver updated to latest adreno 313 rev 23.... returning soon)
Busybox
*****
Magisk updated 20.4
Matched edxposed version can be installed, or not, if preferred via magisk
(note that edxposed is the new framework replacing xposed to allow use with pie, it requires a number of steps, but fairly simple, guide to follow )
Edxposed installer
Gravity box PIE pre installed
Can be dirty flashed over CSH9 , or factory reset both will work. Recommend straight flash over PIE rom / CSH9, negligible benefit from wipe
Requires bootloader update to a pie bootloader if not on pie already.
(it will work without, but experience shows the bootloader update is required for the fingerprint reader to function )
For edxposed......
Xposed does not support android pie.
However, we now have edxposed, a magisk module which does basically the same thing.
Requirements are,
1. Riru core. Go to magisk downloads and type in the search bar "riru" , near the top you'll see riru core, click the download and it will install and offer a reboot.
2. Riru edxposed. Same search and you'll see riru edxposed further down 2 versions I chose sandhook, no reason but it works for me, same thing download it, it installs and offers reboot.
3. Edxposed installer , almost identical to the xposed installer, already installed in the Rom, open it and you should find gravitybox pie version in the modules section it may require switching on.
Advantage of edxposed is it passes safety net,..... I'm told.
Gravity box pie is still in early development, so whilst it has quite a bit there it's still a way off being complete, some selections didn't function for me, but a lot did.
Gravity box will still need to be switched on in edxposed modules.
More mods to follow...
Let me know how it goes
****DOWNLOADS ****
SUPER DEBLOAT
T825_CTD1_TWEAKED_5.1b_DB4_by_rorymc928
Fix for encryption disable...
https://androidfilehost.com/?fid=8889791610682887843
T825_CTD1_TWEAKED_5.1_DB4_by_rorymc928
Withdrawn
*********************
SM-T825_CSH9_TWEAKED_5.0_DB4
https://androidfilehost.com/?fid=1899786940962579651
Bootloader
https://androidfilehost.com/?fid=1899786940962579621
SM-T825 TWEAKED 4.0
https://androidfilehost.com/?fid=1395089523397964302
new bootloader
https://androidfilehost.com/?fid=1395089523397964296
SM-T825 TWEAKED 3.9 (rc)
Magisk root
https://androidfilehost.com/?fid=11410963190603896745
SM-T825 TWEAKED 3.8(a)
Magisk root
https://www.androidfilehost.com/?fid=11410932744536994829
Supersu
temp removed
SM-T825 TWEAKED 3.6s DB4 (systemless supersu)
https://androidfilehost.com/?fid=11410932744536989439
SM-T825 TWEAKED 3.6m DB4 (magisk)
https://androidfilehost.com/?fid=11410932744536989437
SM-T825 TWEAKED 3.5 DB4
https://androidfilehost.com/?fid=1322778262903997340
SM-T825 TWEAKED 3.3 DB3
https://androidfilehost.com/?fid=5862345805528055090
Debloat list
https://androidfilehost.com/?fid=1322778262903995061
FULL ROM...
SM-T825 TWEAKED 3.2
https://www.androidfilehost.com/?fid=890278863836290631
****************
Previous builds
****************
SM-T825 TWEAKED 2.1 02APR2018
Based on latest ARA2 stock firmware,
Smoother and quicker, identical tweaks to T-820 version
Rooted
Init d
Deodex
Zip aligned
Zip align on boot
Sqlite
Extensive testing by kainanmaki SM-T825 user,
****Major credit to kainanmaki, for methodical testing, this wouldn't be here without his help. ****
Version 2.1M2 Magisk root, systemless xposed included, best of both worlds.
Version 2.1S2 Superuser, system xposed.
Both with.
Gravity box Xposed module
3minit battery included
rovo89 and xposed, forum link below
https://forum.xda-developers.com/xposed/xposed-installer-versions-changelog-t2714053
C3C076 and gravity box
https://forum.xda-developers.com/xposed/modules/app-gravitybox-v7-0-0-tweak-box-android-t3653953
gharrington and 3minit battery mod, please visit for a full explanation of its functions
https://forum.xda-developers.com/showthread.php?t=2799958
Best flashed over updated firmware, should dirty flash but tested with factory reset, so do your backups.
Follow instructions below....
1. If you have xposed installed,either select it off in the app or uninstall, I only selected it off.
2. Boot to TWRP
3. Go to wipe,and select factory data reset.
4. Install ROM
5. Long boot........,
6. Ignore the xposed force close
7. Do your normal startup load.
8. Magisk, if that version flashed, will function at this point.
9. If you wish to operate xposed as well,go to the xposed installer app(matched version preinstalled),open it and install the framework,which will be systemless/system. Non recovery installation works fine. It will require reboot.
10. On Magisk version it will pass safetynet check whilst xposed is selected off by its switch,otherwise it indicates fail. So you can swap, as needed by work perhaps, with one reboot.
11. Use gravity box module to switch off stock battery icon.
Link below.........
*****************************************************
TWEAKED 2.1M2 Magisk root, systemless xposed.
*****************************************************
https://androidfilehost.com/?fid=746010030569966037
***********************************************
TWEAKED 2.1S2 Superuser standard xposed.
***********************************************
https://androidfilehost.com/?fid=818070582850504971
TWEAKED 2.0M
https://androidfilehost.com/?fid=890129502657594126
T825_CTD1_TWEAKED_5.1_DB4_by_rorymc928
Based on latest stock CTD1 firmware
Tweaked, stable, zip aligned. SU/D
Forced encryption disabled
Deknoxed
Debloated
(GPU driver updated to latest adreno 313 rev 23.... returning soon)
Busybox
*****
Magisk updated 20.4
Matched edxposed version can be installed, or not, if preferred via magisk
(note that edxposed is the new framework replacing xposed to allow use with pie, it requires a number of steps, but fairly simple, guide to follow )
Edxposed installer
Gravity box PIE pre installed
Can be dirty flashed over CSH9 , or factory reset both will work. Recommend straight flash over PIE rom / CSH9, negligible benefit from wipe
Requires bootloader update to a pie bootloader if not on pie already.
(it will work without, but experience shows the bootloader update is required for the fingerprint reader to function )
For edxposed......
Xposed does not support android pie.
However, we now have edxposed, a magisk module which does basically the same thing.
Requirements are,
1. Riru core. Go to magisk downloads and type in the search bar "riru" , near the top you'll see riru core, click the download and it will install and offer a reboot.
2. Riru edxposed. Same search and you'll see riru edxposed further down 2 versions I chose sandhook, no reason but it works for me, same thing download it, it installs and offers reboot.
3. Edxposed installer , almost identical to the xposed installer, already installed in the Rom, open it and you should find gravitybox pie version in the modules section it may require switching on.
Advantage of edxposed is it passes safety net,..... I'm told.
Gravity box pie is still in early development, so whilst it has quite a bit there it's still a way off being complete, some selections didn't function for me, but a lot did.
Gravity box will still need to be switched on in edxposed modules.
More mods to follow...
Let me know how it goes
****DOWNLOADS ****
SUPER DEBLOAT
T825_CTD1_TWEAKED_5.1b_DB4_by_rorymc928
Fix for encryption disable...
https://androidfilehost.com/?fid=8889791610682887843
T825_CTD1_TWEAKED_5.1_DB4_by_rorymc928
Withdrawn
*********************
SM-T825_CSH9_TWEAKED_5.0_DB4
https://androidfilehost.com/?fid=1899786940962579651
Bootloader
https://androidfilehost.com/?fid=1899786940962579621
SM-T825 TWEAKED 4.0
https://androidfilehost.com/?fid=1395089523397964302
new bootloader
https://androidfilehost.com/?fid=1395089523397964296
SM-T825 TWEAKED 3.9 (rc)
Magisk root
https://androidfilehost.com/?fid=11410963190603896745
SM-T825 TWEAKED 3.8(a)
Magisk root
https://www.androidfilehost.com/?fid=11410932744536994829
Supersu
temp removed
SM-T825 TWEAKED 3.6s DB4 (systemless supersu)
https://androidfilehost.com/?fid=11410932744536989439
SM-T825 TWEAKED 3.6m DB4 (magisk)
https://androidfilehost.com/?fid=11410932744536989437
SM-T825 TWEAKED 3.5 DB4
https://androidfilehost.com/?fid=1322778262903997340
SM-T825 TWEAKED 3.3 DB3
https://androidfilehost.com/?fid=5862345805528055090
Debloat list
https://androidfilehost.com/?fid=1322778262903995061
FULL ROM...
SM-T825 TWEAKED 3.2
https://www.androidfilehost.com/?fid=890278863836290631
****************
Previous builds
****************
SM-T825 TWEAKED 2.1 02APR2018
Based on latest ARA2 stock firmware,
Smoother and quicker, identical tweaks to T-820 version
Rooted
Init d
Deodex
Zip aligned
Zip align on boot
Sqlite
Extensive testing by kainanmaki SM-T825 user,
****Major credit to kainanmaki, for methodical testing, this wouldn't be here without his help. ****
Version 2.1M2 Magisk root, systemless xposed included, best of both worlds.
Version 2.1S2 Superuser, system xposed.
Both with.
Gravity box Xposed module
3minit battery included
rovo89 and xposed, forum link below
https://forum.xda-developers.com/xposed/xposed-installer-versions-changelog-t2714053
C3C076 and gravity box
https://forum.xda-developers.com/xposed/modules/app-gravitybox-v7-0-0-tweak-box-android-t3653953
gharrington and 3minit battery mod, please visit for a full explanation of its functions
https://forum.xda-developers.com/showthread.php?t=2799958
Best flashed over updated firmware, should dirty flash but tested with factory reset, so do your backups.
Follow instructions below....
1. If you have xposed installed,either select it off in the app or uninstall, I only selected it off.
2. Boot to TWRP
3. Go to wipe,and select factory data reset.
4. Install ROM
5. Long boot........,
6. Ignore the xposed force close
7. Do your normal startup load.
8. Magisk, if that version flashed, will function at this point.
9. If you wish to operate xposed as well,go to the xposed installer app(matched version preinstalled),open it and install the framework,which will be systemless/system. Non recovery installation works fine. It will require reboot.
10. On Magisk version it will pass safetynet check whilst xposed is selected off by its switch,otherwise it indicates fail. So you can swap, as needed by work perhaps, with one reboot.
11. Use gravity box module to switch off stock battery icon.
Link below.........
*****************************************************
TWEAKED 2.1M2 Magisk root, systemless xposed.
*****************************************************
https://androidfilehost.com/?fid=746010030569966037
***********************************************
TWEAKED 2.1S2 Superuser standard xposed.
***********************************************
https://androidfilehost.com/?fid=818070582850504971
TWEAKED 2.0M
https://androidfilehost.com/?fid=890129502657594126
Last edited: