• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][STABLE][4.4.4][UNOFFICIAL][SM-G313H/HZ/ML] CyanogenMod 11 for Samsung Galaxy V

How was this ROM after using time?

  • Awesome!

    Votes: 39 54.9%
  • Best

    Votes: 11 15.5%
  • Good

    Votes: 13 18.3%
  • Normal

    Votes: 3 4.2%
  • Terrible :(

    Votes: 10 14.1%

  • Total voters
    71
Search This thread

doesntexits

Senior Member
Apr 12, 2015
1,330
1,744
/dev/null
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 *
 */

BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
Thanks to @JeffersonCaf for confirmed working on SM-G313ML

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.


We'll not support users and answer questions from users which:
  • have flashed mods
  • modified system files
  • didn't follow our intructions word by word
  • are unfriendly


What's working:
  • Wifi (connection, WiFi Direct (testing), tethering, etc)
  • Bluetooth
  • RIL (Calls, SMS, mobile data for both SIMs)
  • Storage (both internal and external)
  • ART (but don't use this as daily because some apps could FC due to compatibility)
  • MTP storage (both internal and external)
  • Offline charging
  • zRAM (compressed-RAM swap)
  • GAPPS (both ART and normal gapps)
  • Tethering (USB, Wifi, Bluetooth)
  • Hardware rendering
  • Camera
  • Torch (flashlight)
  • GPS
  • Video codecs
  • Sound recording

BUGS/Not working (none for SM-G313HZ, but...) :
  • (SM-G313ML) Mobile data doesn't work (this will remain unsolved permanent because we don't have the phone)
BUGS REPORTS ARE GREATLY APPRECIATED.
*Before reporting bugs please include logcat to help us solve the problems easier :D


NOTE: Bugs report for this ROM is closed, as it is already at stable state now

This ROM is suitable for daily use

First time installing CyanogenMod 11.0 to your Galaxy V, or coming from another ROM:
  • Install ClockworkMod Recovery (OR TWRP)
  • Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
  • Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
  • WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
  • Install the ROM from sdcard using ClockworkMod Recovery (OR TWRP)
  • Optionally install the Google Apps (GAPPS)

*NOTE: If you're running TWRP recovery, you must FULLY WIPE DATA on Wipe >> Wipe data >> Type "yes", not swipe to factory reset. If not, you would get bootloops sometimes
LITE GAPPS (7,87MB): Link
GAPPS FOR ART RUNTIME: Link
ROM
  • [3RD FINAL RELEASE]: [TEMPORARILY REMOVED]
  • [2ND FINAL RELEASE]: Link
  • [1ST FINAL RELEASE]: Link
Source: Link

FAQ

1. Why i'm getting bootloops after only wipe data w/o /data/media internal storage?
A: Because sometimes, our /data partition is corrupted, so full wipe is possible.
2. Do i get OTAs everyday?
A: No! Because we're not get this to official, so no OTAs
3. Is init.d supported?
A: Yes, all CyanogenMod ROMs support this, so be free at scriptings
4. Can you include Samsung Apps/ ABCXYZ features here?
A: No! But, you can customize this ROM for your own. If you wanna release it public, give proper credits.
5. I've installed on SM-G313H, but my phone is single-SIM, so why i'm getting dual-SIM?
A: Remove "persist.radio.multisim.config=dsds" from build.prop to switch to single-SIM mode.
6. I'm on SM-G313H/ML, but when installed this ROM, i got SM-G313HZ, why?
A: This ROM is mainly created for SM-G313HZ. If you want to get back to your phone model, change "ro.product.model" in build.prop to your phone model.
7. I can't connect to WiFi?
A: Use any root browser software, go to /data/misc/wifi, change "ctrl_interface" from wpa_supplicant.conf from "wlan0" to "/data/misc/wifi/sockets"
8. WiFi Direct in Settings is not working?
A: This feature is in beta-testing. You can use any 3rd-party software to use this feature.
9. What kernel is using in this ROM? Can i install any kernel on this ROM?
A: Mostly is stock kernel with sth modified to work with CM. You could use any kernel in this CM as you want, but don't send bug reports or confuses about bricked your device due to installing custom kernel. Read carefully first if you're going to install custom kernel. If your device is soft bricked, restore it with Odin or reinstall the ROM with factory reset.
10. Why i can't move apps to SD card?
A: Google and CM themselves removed the code of App2SD from framework mainline, so this feature is unavailable
11. Why i can't call to anyone, even you said that RIL is fixed?
A: You've to active SIMs first, by go to Settings >> SIM cards >> Configure SIM cards >> Touch active (ON/OFF switch) to active SIMs and use them as usual
12. Why installing apps is so damn long?
A: Due to our phone's nature, a 512MB RAM and single-core CPU so if many apps is running background, this could happens. Installing full gapps play a role with this too
13. Where's transparent status bar?
A: You have to enable developer options first, by go to Settings >> About phone >> 7-taps on build number >> Back to settings >> Performance >> Choose "Force high-end graphics" >> Reboot
14.Why after recording, my videos are blacked-out? And changing snap pics << >> recording the screen is nearly black?
A: First, before recording, you've to change codec to MPEG4 first in camera settings. The screen is nearly black because camera's low-light detection module seems broken. Switch to other modes >> Get out camera app >> Reopen it again to fix.
15. Missing 480p quality on YouTube, tho stock still have it?
A: Look at build.prop, change Android version to 4.4.2 and reboot, feel the magic :D

Credits:

  • If you're going to reuse our work, be kind and give proper credits
  • This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
  • Open-source doesn't mean "out of respect"

Screenshots:
attachment.php
attachment.php
attachment.php
attachment.php
attachment.php
attachment.php
attachment.php
attachment.php
attachment.php
attachment.php


CHANGELOG:
Code:
- 2016/1/10
         + Initial release
- 2016/01/24
         + Fixed bluetooth (yay!)
         + Partially fixed video decoding (you can still watching YouTube videos but with low res. FB playback still dead for now)
         + Now with zRAM enabled (harder multitasking)
         + GPS fixed
         + Apps FC fixed (due to OOM-situation, because of missing dalvik lines from build.prop)
- 2016/01/31
         + Fully fixed hardware rendering, now the phone is super-smooth (another yay!, thanks to [user=5822936]@corphish[/user])
         + Fixed wifi and bluetooth tethering
         + Partially fixed camera (still can't take pics and record but can see what's your camera heading to)
         + SD card is now unmountable
         + Fixed battery stats
         + ALMOST FULLY FIXED RIL (damn the 2nd SIM data, but the 1st SIM data still works and big thanks to [user=6100326]@itigr[/user]) (HZ/ML only)
         + Integrates all modules as built-in
- 2016/02/06
         + Fully fixed audio recording
         + Fully fixed camera (now you can snap pics and record like stock)
         + Fixed HW codecs (you could watch films at 720p, but... YouTube seems hates it on 4.4.4)
         + Fixed 2nd SIM signal (going for 2nd SIM data) (HZ/ML only, H fully functional with RIL)
         + Fully fixed tethering (USB, Bluetooth and Wifi tethering now works as it does)
         + Increased zRAM size to 256MB
         + Switch to CM11 bluetooth firmware
         + Added WiFi Direct option (testing)
- 2016/02/08
         + Fixed apps freezes (needs confirmation)
         + Added deadline scheduler
- 2016/02/11 (stable)
         + Fixed phone freezes immediately when doing intensive tasks like games.... (finally)
- 2016/02/13 (FINAL RELEASE)
         + Fully fixed dual-SIM (finally again)
- 2016/04/29 (2nd FINAL RELEASE)
         + Fixed gallery bug, ROM now will be in completely stable state
 

Attachments

  • Screenshot_2016-01-30-18-58-59.png
    Screenshot_2016-01-30-18-58-59.png
    100.3 KB · Views: 95,815
  • Screenshot_2016-01-30-18-59-44.png
    Screenshot_2016-01-30-18-59-44.png
    104.6 KB · Views: 94,357
  • Screenshot_2016-01-30-18-59-59.png
    Screenshot_2016-01-30-18-59-59.png
    138.2 KB · Views: 114,913
  • Screenshot_2016-02-01-21-02-54.png
    Screenshot_2016-02-01-21-02-54.png
    49.5 KB · Views: 93,180
  • Screenshot_2016-02-01-21-03-02.png
    Screenshot_2016-02-01-21-03-02.png
    50.1 KB · Views: 92,880
  • Screenshot_2016-02-06-15-37-56.jpg
    Screenshot_2016-02-06-15-37-56.jpg
    34.9 KB · Views: 114,755
  • Screenshot_2016-02-06-15-38-15.png
    Screenshot_2016-02-06-15-38-15.png
    44.4 KB · Views: 124,583
  • Screenshot_2016-02-06-15-38-23.png
    Screenshot_2016-02-06-15-38-23.png
    68.4 KB · Views: 110,735
  • Screenshot_2016-02-06-15-38-35.png
    Screenshot_2016-02-06-15-38-35.png
    89.6 KB · Views: 109,890
  • Screenshot_2016-02-06-15-39-00.png
    Screenshot_2016-02-06-15-39-00.png
    51.5 KB · Views: 88,466
Last edited:

doesntexits

Senior Member
Apr 12, 2015
1,330
1,744
/dev/null
Well, can't let this damn RIL thing to work.
It just shows one SIM working (still can't make calls but mobile data working), the second only IMEI and mobile number, else no signals
Needs someone to help me here :D
 
  • Like
Reactions: kucrit setiawan

doesntexits

Senior Member
Apr 12, 2015
1,330
1,744
/dev/null
For apps force-closing, you need to add this to build.prop (i'll add it to the next future builds)

Code:
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
dalvik.vm.heaptargetutilization=0.25
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=2m

Edit: Fixed on newer build!
 
Last edited:

doesntexits

Senior Member
Apr 12, 2015
1,330
1,744
/dev/null
New build. Changes:
Code:
- Fixed bluetooth (yay!)
- Partially fixed video decoding (you can still watching YouTube videos but with low res. FB playback still dead for now)
- Now with zRAM enabled (harder multitasking)
- GPS fixed
- Apps FC fixed (due to OOM-situation, because of missing dalvik lines from build.prop)

Can't let this damn RIL thing to work. IDK what Sammy does to its stock (our stock is KitKat, but it doesn't requires any SIM-card registeration LOL)
Link updated to OP
 
Last edited:

doesntexits

Senior Member
Apr 12, 2015
1,330
1,744
/dev/null
New build. Changes:
Code:
- Fully fixed hardware rendering, now the phone is super-smooth (another yay!, thanks to @corphish)
- Fixed wifi and bluetooth tethering
- Partially fixed camera (still can't take pics and record but can see what's your camera heading to)
- SD card is now unmountable
- Fixed battery stats
Link updated to OP
 

corphish

Recognized Dev / Inactive Recognized Contributor
Apr 16, 2014
1,015
2,454
Durgapur
New build. Changes:
Code:
- Fully fixed hardware rendering, now the phone is super-smooth (another yay!, thanks to @corphish)
- Fixed wifi and bluetooth tethering
- Partially fixed camera (still can't take pics and record but can see what's your camera heading to)
- SD card is now unmountable
- Fixed battery stats
Link updated to OP

Could you use this libbinder and let me know if camera taking pics are working or not?
Don't ask why its in form of a vendor blob, long story.
 

corphish

Recognized Dev / Inactive Recognized Contributor
Apr 16, 2014
1,015
2,454
Durgapur
Stuck on Sammy logo :(
Forgot to mention this: The phone will freezes when taking pics and recording

Have you checked the permissions? Changing libbinder on the go can cause this, I prefer to use aroma file manager to change this libs... And set perms.
And yeah, we had the same problem of camera freezing while taking pics. This binder fixed it.
And this libbinder actually worked on 2 sprd phones.
Infact, the libbinder from core3 stock ROM atleast got us to homescreen.
 

doesntexits

Senior Member
Apr 12, 2015
1,330
1,744
/dev/null
Have you checked the permissions? Changing libbinder on the go can cause this, I prefer to use aroma file manager to change this libs... And set perms.
And yeah, we had the same problem of camera freezing while taking pics. This binder fixed it.
And this libbinder actually worked on 2 sprd phones.
Infact, the libbinder from core3 stock ROM atleast got us to homescreen.

LOL, i though AROMA recovery FM already changes permission to default during copy files?
Another Q: which one?
Edit: even deleted the default and copy the downloaded one doesn't work
 
Last edited:

doesntexits

Senior Member
Apr 12, 2015
1,330
1,744
/dev/null
Oh!
Then get full logs, has to be fixed in source.

Its SG Star Pro btw.

OK, idk what reason
Here's the full log, it ends in the end(another typo) and showing no more
Code:
--------- beginning of /dev/log/main
E/logwrapper(   89): executing /system/bin/e2fsck failed: No such file or directory
D/MODEMD  (  119): TD modem is not enabled
D/MODEMD  (  119): W modem is enabled
D/MODEMD  (  119): It's w native version
D/MODEMD  (  119): enter start_service!
D/MODEMD  (  119): open stty dev: /dev/stty_w0
D/MODEMD  (  119): write AT+SMMSWAP=0
 to /dev/stty_w0
--------- beginning of /dev/log/system
I/auditd  (  120): Starting up
D/MODEMD  (  119): ret = 6, buffer = 

D/MODEMD  (  119): OK

D/MODEMD  (  119): read OK from /dev/stty_w0
D/MODEMD  (  119): write AT+CMUX=0
 to /dev/stty_w0
D/MODEMD  (  119): modemd_listenaccept_thread: Waiting for new connect ...
D/MODEMD  (  119): ret = 6, buffer = 

D/MODEMD  (  119): OK

D/MODEMD  (  119): read OK from /dev/stty_w0
D/MODEMD  (  119): start w phoneserver!
D/MODEMD  (  119): modemd_engcontrol_thread: Waiting for new connect ...
D/MODEMD  (  119): modemd_engcontrol_listen:  enter
D/MODEMD  (  119): modemd_engcontrol_listen:begin select 
I/audit_log(  120): Previous audit logfile detected, rotating
I/Vold    (  118): Vold 2.1 (the revenge) firing up
D/Vold    (  118): Volume extSdCard state changing -1 (Initializing) -> 0 (No-Media)
I/DEBUG   (  123): debuggerd: Jan 29 2016 21:57:40
I/installd(  134): installd firing up
I/cm      (  139): ____ _   _ ____ _  _ ____ ____ ____ _  _ _  _ ____ ___ 
D/DataRouter(  137): Main entered
D/DataRouter(  137): switchUser
D/DataRouter(  137): monitor_usb_thread
E/DataRouter(  137): Opening of the usb select file failed fd is -1 & errno is 2
E/DataRouter(  137): Opening of the usb select file failed fd is -1 & errno is 2
E/DataRouter(  137): Opening of the usb select file failed fd is -1 & errno is 2
E/DataRouter(  137): Opening of the usb select file failed fd is -1 & errno is 2
E/DataRouter(  137): Opening of the usb select file failed fd is -1 & errno is 2
D/DataRouter(  137): Initialise USB and start the thread
D/DataRouter(  137): dr_usb_init
E/DataRouter(  137): USB Interface is open with 0x9
D/DataRouter(  137): USB interface is now configured for usb_fd = 0x9
D/DataRouter(  137): monitor_data_of_usb
D/DataRouter(  137): USB monitor thread launched, usb_fd= 0x9
D/DataRouter(  137): Before the usb select
D/MODEMD  (  119): start engservice!
I/cm      (  143): |     \_/  |__| |\ | |  | | __ |___ |\ | |\/| |  | |  \ 
I/cm      (  150): |___   |   |  | | \| |__| |__] |___ | \| |  | |__| |__/ 
I/NPS_MOBEX(  141): Feature_Init
D/MODEMD  (  119): start rild!
D/MODEMD  (  119): start w rild!
E/        (  145): main: slog begin to work. [12]
E/        (  145): handle_slog_property: slog.step = 0, slog.reload = 0 [12]
I/NPS_MOBEX(  141): task Start
D/MODEMD  (  119): detect_sipc_modem: open assert dev: /dev/spipe_w2, fd = 7
D/MODEMD  (  119): detect_sipc_modem: open watchdog dev: /proc/cpw/wdtirq, fd = 15
D/MODEMD  (  119): detect_sipc_modem: wait for modem assert/hangup event ...
D/MODEMD  (  119): detect_modem_blocked: try to connect socket phsw...
D/phoneserver(  151): detect_at_no_response: accept soc_client=40
D/MODEMD  (  119): detect_modem_blocked: connect socket phsw success
D/MODEMD  (  119): detect_modem_blocked: begin detect blocked event on socket phsw...
I/NPS_MOBEX(  141): wscMessageGet msgid:4097
I/NPS_MOBEX(  141): wscSerialOverMTPServiceStartThread
D/Vold    (  118): Volume extSdCard state changing 0 (No-Media) -> 2 (Pending)
I/NPS_MOBEX(  141): wscSerialOverMTPServiceThread
I/NPS_MOBEX(  141): wscSerialOverMTPServiceStart
I/NPS_MOBEX(  141): wscSerialOverMTPServiceConnect
I/NPS_MOBEX(  141): wscSerialOverMTPServiceConnect START
I/NPS_MOBEX(  141): wscSerialOverMTPServiceConnect accept
I/NPS_MOBEX(  141): wifi_wscDataServiceStart
I/NPS_MOBEX(  141): wifi Create server_sockid: 10
I/NPS_MOBEX(  141): wifi_wscDataServiceConnect
I/NPS_MOBEX(  141): wifi_wscDataServiceConnect START
D/DirectVolume(  118): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 129, PARTN 1
D/DirectVolume(  118): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 130, PARTN 2
D/DirectVolume(  118): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 131, PARTN 3
D/DirectVolume(  118): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 132, PARTN 4
D/Vold    (  118): Volume extSdCard state changing 2 (Pending) -> 1 (Idle-Unmounted)
I/cm      (  196): Welcome to Android 4.4.4 / CyanogenMod-11-20160131-UNOFFICIAL-vivalto3gvn 
E/        (  145): handle_kmemleak: handle_kmemleak: off
E/        (  145):  [12]
D/refnotify(  205): Enter RefNotify main 
D/refnotify(  205): Enter RefNotify main td_flag 0 
D/refnotify(  205): RefNotify main: wait for modem notify event ...
D/refnotify(  205): RefNotify ready to do cmd 
D/refnotify(  205): RefNotify_DoCmd, 4 
E/refnotify(  205):  RefNotify_rtc_readtm failed, error: Permission denied
E/refnotify(  205): error to get rtc time 
D/refnotify(  205): RefNotify main: wait for modem notify event ...
D/refnotify(  205): RefNotify ready to do cmd 
D/refnotify(  205): RefNotify_DoCmd, 3 
E/refnotify(  205):  RefNotify_rtc_readtm failed, error: Permission denied
E/refnotify(  205): error to get rtc time 
D/refnotify(  205): RefNotify main: wait for modem notify event ...
D/NVITEM  (  204): /system/bin/nvitemd /dev/spipe_w1 /system/etc/nvitem_w.cfg FALSE
D/NVITEM  (  204): /system/bin/nvitemd /dev/spipe_w1 /system/etc/nvitem_w.cfg FALSE
D/NVITEM  (  204): is_cali_mode 0 
D/NVITEM  (  204): NVITEM: ramDisk_Init enter
D/NVITEM  (  204): NVITEM:	partId	originImage		backupImage		length
D/NVITEM  (  204): NVITEM:	0x       1	/dev/block/platform/sprd-sdhci.3/by-name/FIXNV1	/dev/block/platform/sprd-sdhci.3/by-name/FIXNV2	0x   40000
D/NVITEM  (  204): NVITEM:	0x       2	/dev/block/platform/sprd-sdhci.3/by-name/RUNTIMENV1	/dev/block/platform/sprd-sdhci.3/by-name/RUNTIMENV2	0x   60000
D/NVITEM  (  204): NVITEM get config finished! 
D/NVITEM  (  204): ramDisk_Read enter
D/NVITEM  (  204): NVITEM partId1:/dev/block/platform/sprd-sdhci.3/by-name/FIXNV2 read success!
D/NVITEM  (  204): ramDisk_Read enter
D/NVITEM  (  204): NVITEM partId2:/dev/block/platform/sprd-sdhci.3/by-name/RUNTIMENV1 read success!
D/NVITEM  (  204): NVITEM:channel open
D/NVITEM  (  204): NVITEM:_getPacket
I/macloader(  149): WIFI MAC is valid
 

corphish

Recognized Dev / Inactive Recognized Contributor
Apr 16, 2014
1,015
2,454
Durgapur
OK, idk what reason
Here's the full log, it ends in the end(another typo) and showing no more
Code:
--------- beginning of /dev/log/main
E/logwrapper(   89): executing /system/bin/e2fsck failed: No such file or directory
D/MODEMD  (  119): TD modem is not enabled
D/MODEMD  (  119): W modem is enabled
D/MODEMD  (  119): It's w native version
D/MODEMD  (  119): enter start_service!
D/MODEMD  (  119): open stty dev: /dev/stty_w0
D/MODEMD  (  119): write AT+SMMSWAP=0
 to /dev/stty_w0
--------- beginning of /dev/log/system
I/auditd  (  120): Starting up
D/MODEMD  (  119): ret = 6, buffer = 

D/MODEMD  (  119): OK

D/MODEMD  (  119): read OK from /dev/stty_w0
D/MODEMD  (  119): write AT+CMUX=0
 to /dev/stty_w0
D/MODEMD  (  119): modemd_listenaccept_thread: Waiting for new connect ...
D/MODEMD  (  119): ret = 6, buffer = 

D/MODEMD  (  119): OK

D/MODEMD  (  119): read OK from /dev/stty_w0
D/MODEMD  (  119): start w phoneserver!
D/MODEMD  (  119): modemd_engcontrol_thread: Waiting for new connect ...
D/MODEMD  (  119): modemd_engcontrol_listen:  enter
D/MODEMD  (  119): modemd_engcontrol_listen:begin select 
I/audit_log(  120): Previous audit logfile detected, rotating
I/Vold    (  118): Vold 2.1 (the revenge) firing up
D/Vold    (  118): Volume extSdCard state changing -1 (Initializing) -> 0 (No-Media)
I/DEBUG   (  123): debuggerd: Jan 29 2016 21:57:40
I/installd(  134): installd firing up
I/cm      (  139): ____ _   _ ____ _  _ ____ ____ ____ _  _ _  _ ____ ___ 
D/DataRouter(  137): Main entered
D/DataRouter(  137): switchUser
D/DataRouter(  137): monitor_usb_thread
E/DataRouter(  137): Opening of the usb select file failed fd is -1 & errno is 2
E/DataRouter(  137): Opening of the usb select file failed fd is -1 & errno is 2
E/DataRouter(  137): Opening of the usb select file failed fd is -1 & errno is 2
E/DataRouter(  137): Opening of the usb select file failed fd is -1 & errno is 2
E/DataRouter(  137): Opening of the usb select file failed fd is -1 & errno is 2
D/DataRouter(  137): Initialise USB and start the thread
D/DataRouter(  137): dr_usb_init
E/DataRouter(  137): USB Interface is open with 0x9
D/DataRouter(  137): USB interface is now configured for usb_fd = 0x9
D/DataRouter(  137): monitor_data_of_usb
D/DataRouter(  137): USB monitor thread launched, usb_fd= 0x9
D/DataRouter(  137): Before the usb select
D/MODEMD  (  119): start engservice!
I/cm      (  143): |     \_/  |__| |\ | |  | | __ |___ |\ | |\/| |  | |  \ 
I/cm      (  150): |___   |   |  | | \| |__| |__] |___ | \| |  | |__| |__/ 
I/NPS_MOBEX(  141): Feature_Init
D/MODEMD  (  119): start rild!
D/MODEMD  (  119): start w rild!
E/        (  145): main: slog begin to work. [12]
E/        (  145): handle_slog_property: slog.step = 0, slog.reload = 0 [12]
I/NPS_MOBEX(  141): task Start
D/MODEMD  (  119): detect_sipc_modem: open assert dev: /dev/spipe_w2, fd = 7
D/MODEMD  (  119): detect_sipc_modem: open watchdog dev: /proc/cpw/wdtirq, fd = 15
D/MODEMD  (  119): detect_sipc_modem: wait for modem assert/hangup event ...
D/MODEMD  (  119): detect_modem_blocked: try to connect socket phsw...
D/phoneserver(  151): detect_at_no_response: accept soc_client=40
D/MODEMD  (  119): detect_modem_blocked: connect socket phsw success
D/MODEMD  (  119): detect_modem_blocked: begin detect blocked event on socket phsw...
I/NPS_MOBEX(  141): wscMessageGet msgid:4097
I/NPS_MOBEX(  141): wscSerialOverMTPServiceStartThread
D/Vold    (  118): Volume extSdCard state changing 0 (No-Media) -> 2 (Pending)
I/NPS_MOBEX(  141): wscSerialOverMTPServiceThread
I/NPS_MOBEX(  141): wscSerialOverMTPServiceStart
I/NPS_MOBEX(  141): wscSerialOverMTPServiceConnect
I/NPS_MOBEX(  141): wscSerialOverMTPServiceConnect START
I/NPS_MOBEX(  141): wscSerialOverMTPServiceConnect accept
I/NPS_MOBEX(  141): wifi_wscDataServiceStart
I/NPS_MOBEX(  141): wifi Create server_sockid: 10
I/NPS_MOBEX(  141): wifi_wscDataServiceConnect
I/NPS_MOBEX(  141): wifi_wscDataServiceConnect START
D/DirectVolume(  118): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 129, PARTN 1
D/DirectVolume(  118): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 130, PARTN 2
D/DirectVolume(  118): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 131, PARTN 3
D/DirectVolume(  118): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 132, PARTN 4
D/Vold    (  118): Volume extSdCard state changing 2 (Pending) -> 1 (Idle-Unmounted)
I/cm      (  196): Welcome to Android 4.4.4 / CyanogenMod-11-20160131-UNOFFICIAL-vivalto3gvn 
E/        (  145): handle_kmemleak: handle_kmemleak: off
E/        (  145):  [12]
D/refnotify(  205): Enter RefNotify main 
D/refnotify(  205): Enter RefNotify main td_flag 0 
D/refnotify(  205): RefNotify main: wait for modem notify event ...
D/refnotify(  205): RefNotify ready to do cmd 
D/refnotify(  205): RefNotify_DoCmd, 4 
E/refnotify(  205):  RefNotify_rtc_readtm failed, error: Permission denied
E/refnotify(  205): error to get rtc time 
D/refnotify(  205): RefNotify main: wait for modem notify event ...
D/refnotify(  205): RefNotify ready to do cmd 
D/refnotify(  205): RefNotify_DoCmd, 3 
E/refnotify(  205):  RefNotify_rtc_readtm failed, error: Permission denied
E/refnotify(  205): error to get rtc time 
D/refnotify(  205): RefNotify main: wait for modem notify event ...
D/NVITEM  (  204): /system/bin/nvitemd /dev/spipe_w1 /system/etc/nvitem_w.cfg FALSE
D/NVITEM  (  204): /system/bin/nvitemd /dev/spipe_w1 /system/etc/nvitem_w.cfg FALSE
D/NVITEM  (  204): is_cali_mode 0 
D/NVITEM  (  204): NVITEM: ramDisk_Init enter
D/NVITEM  (  204): NVITEM:	partId	originImage		backupImage		length
D/NVITEM  (  204): NVITEM:	0x       1	/dev/block/platform/sprd-sdhci.3/by-name/FIXNV1	/dev/block/platform/sprd-sdhci.3/by-name/FIXNV2	0x   40000
D/NVITEM  (  204): NVITEM:	0x       2	/dev/block/platform/sprd-sdhci.3/by-name/RUNTIMENV1	/dev/block/platform/sprd-sdhci.3/by-name/RUNTIMENV2	0x   60000
D/NVITEM  (  204): NVITEM get config finished! 
D/NVITEM  (  204): ramDisk_Read enter
D/NVITEM  (  204): NVITEM partId1:/dev/block/platform/sprd-sdhci.3/by-name/FIXNV2 read success!
D/NVITEM  (  204): ramDisk_Read enter
D/NVITEM  (  204): NVITEM partId2:/dev/block/platform/sprd-sdhci.3/by-name/RUNTIMENV1 read success!
D/NVITEM  (  204): NVITEM:channel open
D/NVITEM  (  204): NVITEM:_getPacket
I/macloader(  149): WIFI MAC is valid

I mean, you can flash the working rom, while system is booting, get a logcat..
 

Top Liked Posts

  • There are no posts matching your filters.
  • 11
    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.

    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     */

    BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
    Thanks to @JeffersonCaf for confirmed working on SM-G313ML

    CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.


    We'll not support users and answer questions from users which:
    • have flashed mods
    • modified system files
    • didn't follow our intructions word by word
    • are unfriendly


    What's working:
    • Wifi (connection, WiFi Direct (testing), tethering, etc)
    • Bluetooth
    • RIL (Calls, SMS, mobile data for both SIMs)
    • Storage (both internal and external)
    • ART (but don't use this as daily because some apps could FC due to compatibility)
    • MTP storage (both internal and external)
    • Offline charging
    • zRAM (compressed-RAM swap)
    • GAPPS (both ART and normal gapps)
    • Tethering (USB, Wifi, Bluetooth)
    • Hardware rendering
    • Camera
    • Torch (flashlight)
    • GPS
    • Video codecs
    • Sound recording

    BUGS/Not working (none for SM-G313HZ, but...) :
    • (SM-G313ML) Mobile data doesn't work (this will remain unsolved permanent because we don't have the phone)
    BUGS REPORTS ARE GREATLY APPRECIATED.
    *Before reporting bugs please include logcat to help us solve the problems easier :D


    NOTE: Bugs report for this ROM is closed, as it is already at stable state now

    This ROM is suitable for daily use

    First time installing CyanogenMod 11.0 to your Galaxy V, or coming from another ROM:
    • Install ClockworkMod Recovery (OR TWRP)
    • Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
    • Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
    • WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
    • Install the ROM from sdcard using ClockworkMod Recovery (OR TWRP)
    • Optionally install the Google Apps (GAPPS)

    *NOTE: If you're running TWRP recovery, you must FULLY WIPE DATA on Wipe >> Wipe data >> Type "yes", not swipe to factory reset. If not, you would get bootloops sometimes
    LITE GAPPS (7,87MB): Link
    GAPPS FOR ART RUNTIME: Link
    ROM
    • [3RD FINAL RELEASE]: [TEMPORARILY REMOVED]
    • [2ND FINAL RELEASE]: Link
    • [1ST FINAL RELEASE]: Link
    Source: Link

    FAQ

    1. Why i'm getting bootloops after only wipe data w/o /data/media internal storage?
    A: Because sometimes, our /data partition is corrupted, so full wipe is possible.
    2. Do i get OTAs everyday?
    A: No! Because we're not get this to official, so no OTAs
    3. Is init.d supported?
    A: Yes, all CyanogenMod ROMs support this, so be free at scriptings
    4. Can you include Samsung Apps/ ABCXYZ features here?
    A: No! But, you can customize this ROM for your own. If you wanna release it public, give proper credits.
    5. I've installed on SM-G313H, but my phone is single-SIM, so why i'm getting dual-SIM?
    A: Remove "persist.radio.multisim.config=dsds" from build.prop to switch to single-SIM mode.
    6. I'm on SM-G313H/ML, but when installed this ROM, i got SM-G313HZ, why?
    A: This ROM is mainly created for SM-G313HZ. If you want to get back to your phone model, change "ro.product.model" in build.prop to your phone model.
    7. I can't connect to WiFi?
    A: Use any root browser software, go to /data/misc/wifi, change "ctrl_interface" from wpa_supplicant.conf from "wlan0" to "/data/misc/wifi/sockets"
    8. WiFi Direct in Settings is not working?
    A: This feature is in beta-testing. You can use any 3rd-party software to use this feature.
    9. What kernel is using in this ROM? Can i install any kernel on this ROM?
    A: Mostly is stock kernel with sth modified to work with CM. You could use any kernel in this CM as you want, but don't send bug reports or confuses about bricked your device due to installing custom kernel. Read carefully first if you're going to install custom kernel. If your device is soft bricked, restore it with Odin or reinstall the ROM with factory reset.
    10. Why i can't move apps to SD card?
    A: Google and CM themselves removed the code of App2SD from framework mainline, so this feature is unavailable
    11. Why i can't call to anyone, even you said that RIL is fixed?
    A: You've to active SIMs first, by go to Settings >> SIM cards >> Configure SIM cards >> Touch active (ON/OFF switch) to active SIMs and use them as usual
    12. Why installing apps is so damn long?
    A: Due to our phone's nature, a 512MB RAM and single-core CPU so if many apps is running background, this could happens. Installing full gapps play a role with this too
    13. Where's transparent status bar?
    A: You have to enable developer options first, by go to Settings >> About phone >> 7-taps on build number >> Back to settings >> Performance >> Choose "Force high-end graphics" >> Reboot
    14.Why after recording, my videos are blacked-out? And changing snap pics << >> recording the screen is nearly black?
    A: First, before recording, you've to change codec to MPEG4 first in camera settings. The screen is nearly black because camera's low-light detection module seems broken. Switch to other modes >> Get out camera app >> Reopen it again to fix.
    15. Missing 480p quality on YouTube, tho stock still have it?
    A: Look at build.prop, change Android version to 4.4.2 and reboot, feel the magic :D

    Credits:

    • If you're going to reuse our work, be kind and give proper credits
    • This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
    • Open-source doesn't mean "out of respect"

    Screenshots:
    attachment.php
    attachment.php
    attachment.php
    attachment.php
    attachment.php
    attachment.php
    attachment.php
    attachment.php
    attachment.php
    attachment.php


    CHANGELOG:
    Code:
    - 2016/1/10
             + Initial release
    - 2016/01/24
             + Fixed bluetooth (yay!)
             + Partially fixed video decoding (you can still watching YouTube videos but with low res. FB playback still dead for now)
             + Now with zRAM enabled (harder multitasking)
             + GPS fixed
             + Apps FC fixed (due to OOM-situation, because of missing dalvik lines from build.prop)
    - 2016/01/31
             + Fully fixed hardware rendering, now the phone is super-smooth (another yay!, thanks to [user=5822936]@corphish[/user])
             + Fixed wifi and bluetooth tethering
             + Partially fixed camera (still can't take pics and record but can see what's your camera heading to)
             + SD card is now unmountable
             + Fixed battery stats
             + ALMOST FULLY FIXED RIL (damn the 2nd SIM data, but the 1st SIM data still works and big thanks to [user=6100326]@itigr[/user]) (HZ/ML only)
             + Integrates all modules as built-in
    - 2016/02/06
             + Fully fixed audio recording
             + Fully fixed camera (now you can snap pics and record like stock)
             + Fixed HW codecs (you could watch films at 720p, but... YouTube seems hates it on 4.4.4)
             + Fixed 2nd SIM signal (going for 2nd SIM data) (HZ/ML only, H fully functional with RIL)
             + Fully fixed tethering (USB, Bluetooth and Wifi tethering now works as it does)
             + Increased zRAM size to 256MB
             + Switch to CM11 bluetooth firmware
             + Added WiFi Direct option (testing)
    - 2016/02/08
             + Fixed apps freezes (needs confirmation)
             + Added deadline scheduler
    - 2016/02/11 (stable)
             + Fixed phone freezes immediately when doing intensive tasks like games.... (finally)
    - 2016/02/13 (FINAL RELEASE)
             + Fully fixed dual-SIM (finally again)
    - 2016/04/29 (2nd FINAL RELEASE)
             + Fixed gallery bug, ROM now will be in completely stable state
    4
    New build is here! Changes:
    • Everything in the 2nd stable build
    • Updated sources, Android security patch v20160401
    • Powered by OC Kernel (well, don't have stock kernel in local sources :p)
    That's all guys. This is the last build of CM11, no other future builds anymore. Download link updated to OP
    TO THEMERS: Come here guys, give this ROM a shot :D
    4
    New kernel is here! Changes:
    • Re-compiled kernel with Linaro 4.9.4 toolchain, optimized for Cortex-A7
    • (NEW!) Changed zRAM compressor to LZ4 (faster than LZO)
    • Triple-zRAMs (more crazy multitasking)
    • Added new IO scheduler: ROW
    • (NEW!) Overclock increased to 1,5GHz, also GPU overclocked to 350MHz
    • Disabled zCache, enabled zswap and enable LZ4 zswap compression
    • LZ4 compression to kernel (faster booting)
    • zRAM backported from Linux 3.9 (to enable LZ4 compression)
    • Something more!....
    Link download below in attachment. No need any formatting or factory reset, just install in TWRP or CWM recovery
    3
    Great !^^Thank you , sm-g313h-work

    Press thanks button instead
    3
    Alright, time for fixing final bug: The blacked-out gallery
    @ngoquang2708 already commited this fix, but I forgot to tell with people here, so sorry for late reponse
    Look at /system/etc/media_codecs.xml, find these lines and REMOVE THEM:
    Code:
             <MediaCodec name="OMX.sprd.soft.mpeg4.decoder" type="video/mp4v-es" />
             <MediaCodec name="OMX.sprd.soft.h263.decoder" type="video/3gpp" />
             <MediaCodec name="OMX.sprd.soft.h264.decoder" type="video/avc" />
    OR change to these:
    Code:
           <!--
            <MediaCodec name="OMX.sprd.soft.mpeg4.decoder" type="video/mp4v-es" />
            <MediaCodec name="OMX.sprd.soft.h263.decoder" type="video/3gpp" />
            <MediaCodec name="OMX.sprd.soft.h264.decoder" type="video/avc" />
            -->
    And reboot your phone. That's the manually fix for build 20160213, and I've included it with build 20160429 (with this change only). ROM will now at completely stable state
    NOTE FOR G313ML USERS: Since we don't have that model variant, so the mobile data problem will remain unsolvable forever. Thanks for using this ROM. I hope someone will look at our source and have a fix of G313ML's mobile data, rebuild a stable build for G313ML :D
    Also from now, dalvik-cache in /system partition now is CM11's unique feature, with OC kernel too :D
    Tried this rom . Quick Toggle for Sound in the notifications is not working properply. Gallery still doesnt work even after reopening for many times, still greyed out.

    About gallery problem, look at the solution above
    About the sound toggle, it still works tho