[ROM][STABLE][6.0.1][16/01]CyanogenMod 13.0 for UMI SUPER

joe2k01

Senior Member
Dec 13, 2015
1,306
819
0
19
Cagliari (Sardinia)
HELLO EVERYONE!



We are not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
OLD

BETA 1:

WORKING:
  • Camera(Front & Back)
  • Bluetooth
  • WiFi
  • Vibration
  • Flashlight
  • Rotation
  • GPS(High Accuracy & Battery Saving)
  • FM Radio
  • Basically everything besides bugs.
NOT WORKING:
  • Tethering(Not working)
  • GPS(Device only)
  • Fingerprint Scanner(Not working)

DOWNLOAD:
Beta 1: https://drive.google.com/file/d/0BwCNTUSl2CzjMFRnMmhqTTdyVFk/view?pref=2&pli=1

How to install:
Step-by-step tutorial in 4th post.

For using physical buttons instead of Nav Bar then change this value from 0 to 1 in build.prop.
Code:
qemu.hw.mainkeys=0
If you want root:
See 4th post.

NOTE: YOU HAVE TO FLASH STOCK ROM 20160616, BECAUSE THIS BUILD IS BASED ON THAT. Updates are coming to fix this.

BETA 2:

WORKING:
  • Camera(Front & Back, better zoom than BETA1)
  • Bluetooth
  • WiFi
  • Vibration
  • Flashlight
  • Rotation
  • GPS(High Accuracy & Battery Saving)
  • FM Radio
  • Fingerprint Scanner
  • Tethering(USB)
  • Basically everything besides bugs.
NOT WORKING:
  • Tethering(WIFI)
  • GPS(Device only)
  • Audio services force close 2 times.
  • Only RGB colours for the LED.

DOWNLOAD:
Beta 2: https://mega.nz/#!kxUWHYiL!kdM464NkMB58H1HhAD6fbnz1YOS17CKG1D19xkhszVk

How to install:
Step-by-step tutorial in 4th post.

If you want root:
See 4th post.

STABLE V1(3):

WORKING:
  • Camera
  • Bluetooth
  • WiFi
  • Vibration
  • Flashlight
  • Rotation
  • GPS
  • Fingerprint Scanner
  • Tethering
  • Notifications LED(use 3rd party app to set colors)
  • Basically everything besides bugs.

NOT WORKING:
  • HDR Force close.
  • No LED colour change
  • FM Radio Force close

How to install:
Step-by-step tutorial in 3rd post.
*** BEWARE: If you get bootloop flashing from stock, please install before Beta2 build with clean flash (wipe Dalvik, Cache, Data), then install Stable build with Gapps, clean flash again***
DOWNLOAD:
STABLE 1:
https://docs.google.com/uc?id=0B2n710fxn_CpTjlTMFJfV016UXc&export=download
SuperSU:
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip
BusyBox:
https://www.androidfilehost.com/?fid=24269982086993145
GAPPS:
http://opengapps.org/ Use arm64 android 6.0


Stable 2:
WORKING:
  • Camera(besides video recording issues)
  • Bluetooth
  • WiFi
  • Vibration
  • Flashlight
  • Rotation
  • GPS
  • Fingerprint Scanner
  • FM Radio
  • NEW SCREEN
  • Encrypting
  • Built-in root
  • SD Card
  • Notifications LED
  • Basically everything besides bugs.

NOT WORKING:
  • Google Camera fc
  • HDR gives fc
  • Video recording not working on Snapchat.
  • Tethering not working
  • CM Screen Recorder not working
  • Audio over bluetooth

HOW TO INSTALL:
1) Flash TWRP in SPFT.
2) Wipe data, dalvik and cache.
3) Install CyanogenMod and GAPPS of your selection.
4) Reboot and voila!
You can flash this from stock

DOWNLOAD:
CyanogenMod:
Google drive

GAPPS:
http://opengapps.org/ Use arm64 android 6.0

Please post bugs etc, in the Bug Reports section and request what questions you want to be answered in the Q/A section aswell.

If you have any questions, please look in the Q/A section before asking.

!!!WE NEED HELP!!!

Would be really great for us if you guys send us logcats with the problems you're having, so we could have something to work with. A nice tutorial to start with.

Credits:
  • CyanogenMod team
  • Wuxianlin
  • Ferhung
  • Xen0n
  • Deepflex
  • Leskal
  • JonnyXDA
  • olegsvs
  • Visi0nary
  • andyrichardson
  • Team M.A.D

Device tree: Github
Vendor tree: Github

XDA:DevDB Information
CyanogenMod 13 for UMI SUPER, ROM for all devices (see above for details)

Contributors
joe2k01, Rometheus, Flounderist
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: UMI SUPER WITH TWRP INSTALLED
Based On: CyanogenMod

Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2017-01-16
Current Beta Version: 2.6
Beta Release Date: 2016-08-19

Created 2016-08-19
Last Updated 2017-01-16
 

Attachments

Last edited:

joe2k01

Senior Member
Dec 13, 2015
1,306
819
0
19
Cagliari (Sardinia)
how to install stable cm 13
..Do this after followind Flounderist post on how to install TWRP..​
Before installing stable 1 you have to install beta2 if you're coming from stock
1)Download the zip package from the first post
Now you can proceed in 4 ways:
a)install only CM
b)install CM and SuperSU
c)install CM, SuperSU and GAPPS
d)install CM, and GAPPS

a1)Copy the zip package to your sdcard
a2)Go into TWRP
a3)Wipe data cache and dalvik
a4)Flash the zip package then reboot
DONE!

b1)Copy the zip package to your sdcard
b2)Go into TWRP
b3)Wipe data cache and dalvik
b4)Flash the CM zip package
b5)Flash SuperSU zip package
b6)Flash BusyBox zip package
DONE!

c1)Copy the zip package to your sdcard
c2)Go into TWRP
c3)Wipe data cache and dalvik
c4)Flash the CM zip package
c5)Flash the GAPPS zip package
c6)Flash SuperSU zip package
c7)Flash BusyBox zip package
DONE!

d1)Copy the zip package to your sdcard
d2)Go into TWRP
d3)Wipe data cache and dalvik
d4)Flash the CM zip package
d5)Flash the GAPPS zip package
DONE!
 
Last edited:

joe2k01

Senior Member
Dec 13, 2015
1,306
819
0
19
Cagliari (Sardinia)
Changelog

Update of 16/01/2017
Code:
[CENTER]
[B]
Fixed FM Radio
Fixed led notification
Possibly fixed audio over bluetooth
Using new camera libs
Using new screen libs
Using latest stock kernel
[/B]
[/CENTER]
Logcats or help are welcome :highfive:
 
Last edited:

Flounderist

Senior Member
Jan 7, 2016
834
407
93
Cork
Installation tutorial

###########

First, you must install proper MTK Driver on your PC.

For Win10 users please use this link:
http://tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/

Then download SPFlashtool for Windows.
UMI Super seems working better on ver 5.1604, download it here:
https://mega.nz/#!LRslFIrQ!QIAUzRXMsVGn78Xku0L53CSOEHRMbt8YgjPo1sLlv6s

Use this guide if you want improve your knowledge on SPFT
http://forum.xda-developers.com/showthread.php?t=1982587

Then download TWRP 3.0.2 from here
http://forum.xda-developers.com/showpost.php?p=67288617&postcount=8

Now you are set to flash TWRP on your device.


Extract scatter_file.txt from your firmware folder or download it from here:
https://drive.google.com/open?id=0BzvAF-6zwoYwUWdlZGNzSFNPdGc


- In your device settings menu, go in "Developer option" and allow Debug USB mode
- Remove SD card from device, for security reasons.
- Connect your device using a USB cable
- Once your PC recognized the MTK Driver, disconnect it from PC.
- Switch off your device. It has to be disconnected from PC.
- Start SPFT.
- Set the program in "Download only" mode
- Locate your scatter file on SPFT
- Locate the TWRP .img file clicking on SPFT folder icon. Please rename it "recovery" before locating it.
- Select ONLY the recovery line in SPFT ticking the box on the left. If in doubt follow the SPFT tutorial linked above.
- Click on "Download"
- While switched off, connect your device to the USB cable.
- Press the power button and keep pressed until you get the "Download OK" on your PC screen.
- Flashing time is a few second. If something goes wrong, you will have an error message.
- Disconnect your device from your PC. Press Power + Volume UP to entry in recovery mode.
- As you see the UMI logo, release buttons and it will boot in recovery mode.
- Read carefully the information on first boot in recovery mode.
- Thick on the square and then swipe to made the TWRP permanently installed on your device.


######################################

Now you are ready to flash cm13 on your device.

Download the ROM from link in OP and GAPPS and transfer them on your device.

Reboot your device in recovery mode.

Go in BACKUP section and perform a Nandroid backup.
Do it for security reason
Do it for security reason
Do it for security reason

- Wipe Cache, Dalvik, Data. This will cancel all your account data, but will keep all your files available on device.
- Once wiped as above, tap on "Install"
- Select the ROM, then add Gapps to the zip queue.
- Swipe for flashing
- Wait until flashing process has finished.
- Swipe for cache/dalvik wipe and tap on reboot.
- First reboot is usually quite long, you will see the CM logo flashing for 2/3 mins before update
- Once rebooted, set your account back.
- Enjoy cm13 on your device!
####################################################

If you want, you can flash SuperSu, for root permissions.
Here is the dowload link:
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip

Please report any error in this guide, and any error in flashing, using etc.
A known issue is a "CM Audio Service Stopped working" on boot. It is a minor bug, it will be fixed a.s.a.p.

xPosed seems not working, please report any fix, if available, and share with us :)

A big THANK YOU to:
@Deepflex for the original Elephone p9000 cm ROM, he did the hard work, he deserves all the credits.
@sandeep.sethi for his porting guide and for all the support.
@megthebest and @jemmini for TWRP and all the support.
@Aaahh for the sarcasm and the information.
 
Last edited:

kestrelv2

Senior Member
Dec 2, 2012
115
10
18
Can't use until fingerprint scanner is working as I use it every day to activate my screen rather than wear out the power button. Will it ever be functional or is that something that will never work due to lack of drivers?
 

GoJo ^^

Senior Member
Dec 2, 2011
3,368
170
203
Seems an update with it working is coming! By the way, the Gapps we should take are 6.0 arm64, correct?

Sent from my JY-S3 using Tapatalk
 

aageon

Member
Jan 21, 2011
8
0
0
Nice rom, but I always get on boot CM audio service has stopped.

Edit: can't find the option to enable the led pulse (harelequin or something like that) .
 
Last edited:

thiagosobral

New member
Aug 21, 2016
1
0
0
Thank you very much for your efforts in improving UMI Super!
It makes a long time I don't deal with ROM flashing and such, but I'm really looking forward to do it.
Are there any improvements to the camera quality? Or maybe that is something more related to the firmware itself and can only be fixed by UMI engineers or Mediatek's? (Sorry if the question is 'absurd' from the technical point of view). :)

Thank you in advance.