• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][STOCK][FASTBOOT][OP7T] Stock Fastboot ROMs for OnePlus 7T

Search This thread

mauronofrio

Recognized Developer
Jun 29, 2012
4,359
13,690
24
Castellana Grotte
toolaio.tk
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.

HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 7T in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus 7T to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.


DOWNLOAD

All roms on AFH: https://www.androidfilehost.com/?w=files&flid=300020
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus 7T

BRANDED PHONE
For now branded device are not supported

MANUAL FLASH: Windows - OSX - Linux

If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here

Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash boot boot.img
fastboot flash dsp dsp.img
fastboot flash dtbo dtbo.img
fastboot flash LOGO LOGO.img
fastboot flash modem modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash opproduct opproduct.img
fastboot reboot fastboot
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot

REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.

If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.

These ROMs can't be used to update or downgrade your phone but just to restore your phone.

If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.

If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide

If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/

If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34

DONATE LINK

If you want to support this and others my projects please consider making a donation, thanks.

 
Last edited:

mauronofrio

Recognized Developer
Jun 29, 2012
4,359
13,690
24
Castellana Grotte
toolaio.tk
Unfortunately i have not tested this fastboot rom, i did some tests with an user and nothing else, actually you can't flash from normal fastboot mode system, vendor and product images, you need to use "fastboot reboot fastboot" command to reboot in stock recovery with fastbootd enabled, after that using the fastboot commands you can flash system, vendor and product images.

If you have any problems with this fastboot rom or you see errors during the script execution, contact me
 

w41ru5

Senior Member
Jul 17, 2017
717
357
53
"This will work only if your bootloader is unlocked."
Supposed someone gets into trouble - as seen in another thread with a bricked device.
Wouldn't that happen usually if the bootloader is unlocked?
Like if someone want to do some modifications/tweaking, I believe it requuires to unlock the bootloader.
What other scenario could be happening to get into issues with and locked bootloader?
Please excuse the lack of knowledge on a/b partitions and stuff.
Thank you.
 
Last edited:

Rescla

New member
Oct 17, 2019
2
1
Wifi and speaker did not work anymore after messing with the magisk compatible boot image and/or update to 10.0.3. This fixed it for me, thanks!

Small note though, I was using older drivers which caused some errors while running the bat script. Namely "Flashing is not allowed for Critical Partitions" and " Failed to boot into userspace fastboot; one or more components might be unbootable". After running the 15 seconds adb installer and running the script again everything worked fine: https://forum.xda-developers.com/showthread.php?t=2588979
 
  • Like
Reactions: spoonymoon

sandeep chauhan 2722

Senior Member
Mar 4, 2014
73
13
Silvassa
Wifi and speaker did not work anymore after messing with the magisk compatible boot image and/or update to 10.0.3. This fixed it for me, thanks!

Small note though, I was using older drivers which caused some errors while running the bat script. Namely "Flashing is not allowed for Critical Partitions" and " Failed to boot into userspace fastboot; one or more components might be unbootable". After running the 15 seconds adb installer and running the script again everything worked fine: https://forum.xda-developers.com/showthread.php?t=2588979

please help me Bro My wifi is not working and if someone calls me it auto rejected all call

Do you want to wipe all the data ( Reccomended )[Y/N]?y
Erasing 'userdata' OKAY [ 0.421s]
mke2fs 1.44.4 (18-Aug-2018)
Creating filesystem with 56734085 4k blocks and 14188544 inodes
Filesystem UUID: 63051112-f179-11e9-b2d0-d132c7036180
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,

4096000, 7962624, 11239424, 20480000, 23887872

Allocating group tables: done
Writing inode tables: done
Creating journal (262144 blocks): done
Writing superblocks and filesystem accounting information: done

Sending 'userdata' (5024 KB) OKAY [ 0.125s]
Writing 'userdata' OKAY [ 0.000s]
Erasing 'metadata' OKAY [ 0.016s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Finished. Total time: 1.638s
Sending 'aop' (200 KB) OKAY [ 0.016s]
Writing 'aop' OKAY [ 0.000s]
Finished. Total time: 0.031s
Sending 'bluetooth' (828 KB) OKAY [ 0.031s]
Writing 'bluetooth' OKAY [ 0.000s]
Finished. Total time: 0.078s
Sending 'boot_a' (98304 KB) OKAY [ 2.215s]
Writing 'boot_a' OKAY [ 0.421s]
Finished. Total time: 4.072s
Sending 'dsp' (65536 KB) OKAY [ 1.466s]
Writing 'dsp' OKAY [ 0.234s]
Finished. Total time: 2.496s
Sending 'cmnlib' (384 KB) OKAY [ 0.016s]
Writing 'cmnlib' FAILED (remote: 'Flashing is
not allowed for Critical Partitions
')
fastboot: error: Command failed
Sending 'cmnlib64' (500 KB) OKAY [ 0.031s]
Writing 'cmnlib64' FAILED (remote: 'Flashing is
not allowed for Critical Partitions
')
fastboot: error: Command failed
Sending 'devcfg' (52 KB) OKAY [ 0.000s]
Writing 'devcfg' FAILED (remote: 'Flashing is
not allowed for Critical Partitions
 

mauronofrio

Recognized Developer
Jun 29, 2012
4,359
13,690
24
Castellana Grotte
toolaio.tk
please help me Bro My wifi is not working and if someone calls me it auto rejected all call

Do you want to wipe all the data ( Reccomended )[Y/N]?y
Erasing 'userdata' OKAY [ 0.421s]
mke2fs 1.44.4 (18-Aug-2018)
Creating filesystem with 56734085 4k blocks and 14188544 inodes
Filesystem UUID: 63051112-f179-11e9-b2d0-d132c7036180
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,

4096000, 7962624, 11239424, 20480000, 23887872

Allocating group tables: done
Writing inode tables: done
Creating journal (262144 blocks): done
Writing superblocks and filesystem accounting information: done

Sending 'userdata' (5024 KB) OKAY [ 0.125s]
Writing 'userdata' OKAY [ 0.000s]
Erasing 'metadata' OKAY [ 0.016s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Finished. Total time: 1.638s
Sending 'aop' (200 KB) OKAY [ 0.016s]
Writing 'aop' OKAY [ 0.000s]
Finished. Total time: 0.031s
Sending 'bluetooth' (828 KB) OKAY [ 0.031s]
Writing 'bluetooth' OKAY [ 0.000s]
Finished. Total time: 0.078s
Sending 'boot_a' (98304 KB) OKAY [ 2.215s]
Writing 'boot_a' OKAY [ 0.421s]
Finished. Total time: 4.072s
Sending 'dsp' (65536 KB) OKAY [ 1.466s]
Writing 'dsp' OKAY [ 0.234s]
Finished. Total time: 2.496s
Sending 'cmnlib' (384 KB) OKAY [ 0.016s]
Writing 'cmnlib' FAILED (remote: 'Flashing is
not allowed for Critical Partitions
')
fastboot: error: Command failed
Sending 'cmnlib64' (500 KB) OKAY [ 0.031s]
Writing 'cmnlib64' FAILED (remote: 'Flashing is
not allowed for Critical Partitions
')
fastboot: error: Command failed
Sending 'devcfg' (52 KB) OKAY [ 0.000s]
Writing 'devcfg' FAILED (remote: 'Flashing is
not allowed for Critical Partitions

And others partitions?
 

mauronofrio

Recognized Developer
Jun 29, 2012
4,359
13,690
24
Castellana Grotte
toolaio.tk
flashing process stop here.

i also try to flash manually but when I give 4th command to flash "fastboot flash cmnlib cmnlib.img" it gives me error now I cany use my phone no sound no wifi no calls please help me

if some partition fail is not a problem, you should wait a bit
 

suzook

Senior Member
Jan 25, 2010
4,475
1,177
I am getting

Invalid sparse file format at header magic
Sending sparse 'system' 1/3 (784696 KB) OKAY [ 18.274s]
Writing 'system' FAILED (remote: 'Partition not found')

ANy ideas???

I can flash other partitions though
 

954wrecker

Senior Member
Jul 9, 2012
3,167
1,550
After flashing the stock rom it boots up and everything seems fine. When I try to lock the bootloader I get the "Your device is corrupt. It can´t be trusted anymore and will not boot" I've unlocked the bootloader a few times tried reflashing stock rom but everytime I lock the bootloader I get that error message. Any ideas?
***Downloaded and Installed the stock rom through the system update in settings menu. Locked the bootloader without issues afterwards***
 
Last edited:

mauronofrio

Recognized Developer
Jun 29, 2012
4,359
13,690
24
Castellana Grotte
toolaio.tk
After flashing the stock rom it boots up and everything seems fine. When I try to lock the bootloader I get the "Your device is corrupt. It can´t be trusted anymore and will not boot" I've unlocked the bootloader a few times tried reflashing stock rom but everytime I lock the bootloader I get that error message. Any ideas?
***Downloaded and Installed the stock rom through the system update in settings menu. Locked the bootloader without issues afterwards***

So after flashed this fastboot rom, you should local update the original .zip rom to be sure that all partitions are replaced
 

sathya

Senior Member
Sep 13, 2006
333
36
OnePlus 7T
I am stuck on the "The boot loader is unlocked....." and i tried to flash this but i am getting too many errors and post reboot its back on the same screen. Can anybody please help me?

Creating filesystem with parameters:
Size: 232382812160
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 56734085
Block groups: 1732
Reserved block group size: 1024
Created filesystem with 11/14188544 inodes and 938604/56734085 blocks
target reported max download size of 805306368 bytes
Erase successful, but not automatically formatting.
Can't determine partition type.
FAILED (remote: GetVar Variable Not found)
erasing 'userdata'...
OKAY [ 0.688s]
sending 'userdata' (152025 KB)...
OKAY [ 3.922s]
writing 'userdata'...
OKAY [ 0.000s]
erasing 'cache'...
FAILED (remote: Check device console.)
finished. total time: 8.001s
error: cannot load 'aop.img'
error: cannot load 'bluetooth.img'
error: cannot load 'boot.img'
error: cannot load 'dsp.img'
error: cannot load 'cmnlib.img'
error: cannot load 'cmnlib64.img'
error: cannot load 'devcfg.img'
error: cannot load 'dtbo.img'
error: cannot load 'LOGO.img'
error: cannot load 'modem.img'
error: cannot load 'oem_stanvbk.img'
error: cannot load 'qupfw.img'
error: cannot load 'storsec.img'
error: cannot load 'multiimgoem.img'
error: cannot load 'hyp.img'
error: cannot load 'imagefv.img'
error: cannot load 'keymaster.img'
error: cannot load 'uefisecapp.img'
error: cannot load 'recovery.img'
fastboot: unknown option -- disable-verity
fastboot: unknown option -- disable-verity
error: cannot load 'opproduct.img'
error: cannot load 'tz.img'
usage: fastboot [ <option> ] <command>

commands:
update <filename> reflash device from update.zip
flashall flash boot, system, vendor and if found,
recovery
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format[:[<fs type>][:[<size>]] <partition> format a flash partition.
Can override the fs type and/or
size the bootloader reports.
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> [ <second> ] ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> [ <second> ] ] create bootimage and
flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message

options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address.
default: 0x10000000
-n <page size> specify the nand page size.
default: 2048
-S <size>[K|M|G] automatically sparse files greater
than size. 0 to disable
error: cannot load 'system.img'
error: cannot load 'vendor.img'
error: cannot load 'product.img'
rebooting...
 

mauronofrio

Recognized Developer
Jun 29, 2012
4,359
13,690
24
Castellana Grotte
toolaio.tk
I am stuck on the "The boot loader is unlocked....." and i tried to flash this but i am getting too many errors and post reboot its back on the same screen. Can anybody please help me?

Creating filesystem with parameters:
Size: 232382812160
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 56734085
Block groups: 1732
Reserved block group size: 1024
Created filesystem with 11/14188544 inodes and 938604/56734085 blocks
target reported max download size of 805306368 bytes
Erase successful, but not automatically formatting.
Can't determine partition type.
FAILED (remote: GetVar Variable Not found)
erasing 'userdata'...
OKAY [ 0.688s]
sending 'userdata' (152025 KB)...
OKAY [ 3.922s]
writing 'userdata'...
OKAY [ 0.000s]
erasing 'cache'...
FAILED (remote: Check device console.)
finished. total time: 8.001s
error: cannot load 'aop.img'
error: cannot load 'bluetooth.img'
error: cannot load 'boot.img'
error: cannot load 'dsp.img'
error: cannot load 'cmnlib.img'
error: cannot load 'cmnlib64.img'
error: cannot load 'devcfg.img'
error: cannot load 'dtbo.img'
error: cannot load 'LOGO.img'
error: cannot load 'modem.img'
error: cannot load 'oem_stanvbk.img'
error: cannot load 'qupfw.img'
error: cannot load 'storsec.img'
error: cannot load 'multiimgoem.img'
error: cannot load 'hyp.img'
error: cannot load 'imagefv.img'
error: cannot load 'keymaster.img'
error: cannot load 'uefisecapp.img'
error: cannot load 'recovery.img'
fastboot: unknown option -- disable-verity
fastboot: unknown option -- disable-verity
error: cannot load 'opproduct.img'
error: cannot load 'tz.img'
usage: fastboot [ <option> ] <command>

commands:
update <filename> reflash device from update.zip
flashall flash boot, system, vendor and if found,
recovery
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format[:[<fs type>][:[<size>]] <partition> format a flash partition.
Can override the fs type and/or
size the bootloader reports.
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> [ <second> ] ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> [ <second> ] ] create bootimage and
flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message

options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address.
default: 0x10000000
-n <page size> specify the nand page size.
default: 2048
-S <size>[K|M|G] automatically sparse files greater
than size. 0 to disable
error: cannot load 'system.img'
error: cannot load 'vendor.img'
error: cannot load 'product.img'
rebooting...

You should extract all the rom
 
  • Like
Reactions: sathya

dave.walton

New member
Nov 5, 2019
1
0
soft bricked oneplus 7t

Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.

HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 7T in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus 7T to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.


DOWNLOAD

All roms on AFH: https://www.androidfilehost.com/?w=files&flid=300020
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus 7T

BRANDED PHONE
For now branded device are not supported

MANUAL FLASH: Windows - OSX - Linux

If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here

Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash boot boot.img
fastboot flash dsp dsp.img
fastboot flash dtbo dtbo.img
fastboot flash LOGO LOGO.img
fastboot flash modem modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash opproduct opproduct.img
fastboot reboot fastboot
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot

REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.

These ROMs can't be used to update or downgrade your phone but just to restore your phone.

If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.

If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide

If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/

If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34

DONATE LINK

If you want to support this and others my projects please consider making a donation, thanks.


Hi mauronofrio
I downloaded your version of twrp for my oneplus 7t and unlocked the bootloader in an attempt to change to Oxygen OS. Unfortunately the system, vendor and product partitions are locked and 0MB so seem to be stuck, can write to the /recovery directory but that's about it. I try to flash it but always get the mount error on those directories. I downloaded the rom in this post and extracted to a folder but not quite clear how to run the bat command.

Any clues or tips would be most appreciated. By the way I somehow deleted the recovery rom so can't even boot into Hydrogen OS anymore.

thanks
Dave
 

Top Liked Posts

  • There are no posts matching your filters.
  • 30
    Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.

    HOW TO FLASH
    This version is only for not branded devices
    Download the zip;
    Unpack the zip in a folder;
    Reboot the OnePlus 7T in fastboot-bootloader mode (Power and volume + and volume-);
    Connect the OnePlus 7T to PC;
    Run flash-all.bat flasher you need;
    Wait until the process end;
    The phone will automatically reboot.


    DOWNLOAD

    All roms on AFH: https://www.androidfilehost.com/?w=files&flid=300020
    All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus 7T

    BRANDED PHONE
    For now branded device are not supported

    MANUAL FLASH: Windows - OSX - Linux

    If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here

    Is reccomended to format data or the rom cannot boot:
    Code:
    fastboot -w
    Others Commands to flash a fastboot rom
    Code:
    fastboot flash aop aop.img
    fastboot flash bluetooth bluetooth.img
    fastboot flash boot boot.img
    fastboot flash dsp dsp.img
    fastboot flash dtbo dtbo.img
    fastboot flash LOGO LOGO.img
    fastboot flash modem modem.img
    fastboot flash oem_stanvbk oem_stanvbk.img
    fastboot flash qupfw qupfw.img
    fastboot flash storsec storsec.img
    fastboot flash multiimgoem multiimgoem.img
    fastboot flash uefisecapp uefisecapp.img
    fastboot flash recovery recovery.img
    fastboot --disable-verity flash vbmeta vbmeta.img
    fastboot --disable-verity flash vbmeta_system vbmeta_system.img
    fastboot flash opproduct opproduct.img
    fastboot reboot fastboot
    fastboot flash system system.img
    fastboot flash vendor vendor.img
    fastboot flash product product.img
    fastboot reboot

    REMEMBER
    "Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.

    If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.

    These ROMs can't be used to update or downgrade your phone but just to restore your phone.

    If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.

    If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide

    If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/

    If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34

    DONATE LINK

    If you want to support this and others my projects please consider making a donation, thanks.

    6
    Unfortunately i have not tested this fastboot rom, i did some tests with an user and nothing else, actually you can't flash from normal fastboot mode system, vendor and product images, you need to use "fastboot reboot fastboot" command to reboot in stock recovery with fastbootd enabled, after that using the fastboot commands you can flash system, vendor and product images.

    If you have any problems with this fastboot rom or you see errors during the script execution, contact me
    3
    D
    Deleted member 5408779
    Any new fasboot images of latest OOS 7T versions..?

    I have OB6 if you are interested.
    https://mega.nz/file/xBFFVIBQ#zTOmecylCIr8ZkK902U_O_VRcAHhW7mXWMFJX5M2_Dw

    @mauronofrio I'll delete if you don't like I post it.
    2
    Really thanks for this.
    Any update on root ?

    Unfortunately no, i will check in the next hours, but without a tester should be not easy
    2
    please help me Bro My wifi is not working and if someone calls me it auto rejected all call

    Do you want to wipe all the data ( Reccomended )[Y/N]?y
    Erasing 'userdata' OKAY [ 0.421s]
    mke2fs 1.44.4 (18-Aug-2018)
    Creating filesystem with 56734085 4k blocks and 14188544 inodes
    Filesystem UUID: 63051112-f179-11e9-b2d0-d132c7036180
    Superblock backups stored on blocks:
    32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,

    4096000, 7962624, 11239424, 20480000, 23887872

    Allocating group tables: done
    Writing inode tables: done
    Creating journal (262144 blocks): done
    Writing superblocks and filesystem accounting information: done

    Sending 'userdata' (5024 KB) OKAY [ 0.125s]
    Writing 'userdata' OKAY [ 0.000s]
    Erasing 'metadata' OKAY [ 0.016s]
    Erase successful, but not automatically formatting.
    File system type raw not supported.
    Finished. Total time: 1.638s
    Sending 'aop' (200 KB) OKAY [ 0.016s]
    Writing 'aop' OKAY [ 0.000s]
    Finished. Total time: 0.031s
    Sending 'bluetooth' (828 KB) OKAY [ 0.031s]
    Writing 'bluetooth' OKAY [ 0.000s]
    Finished. Total time: 0.078s
    Sending 'boot_a' (98304 KB) OKAY [ 2.215s]
    Writing 'boot_a' OKAY [ 0.421s]
    Finished. Total time: 4.072s
    Sending 'dsp' (65536 KB) OKAY [ 1.466s]
    Writing 'dsp' OKAY [ 0.234s]
    Finished. Total time: 2.496s
    Sending 'cmnlib' (384 KB) OKAY [ 0.016s]
    Writing 'cmnlib' FAILED (remote: 'Flashing is
    not allowed for Critical Partitions
    ')
    fastboot: error: Command failed
    Sending 'cmnlib64' (500 KB) OKAY [ 0.031s]
    Writing 'cmnlib64' FAILED (remote: 'Flashing is
    not allowed for Critical Partitions
    ')
    fastboot: error: Command failed
    Sending 'devcfg' (52 KB) OKAY [ 0.000s]
    Writing 'devcfg' FAILED (remote: 'Flashing is
    not allowed for Critical Partitions

    And others partitions?