Can this use to flash from Hydrogen to Oxygen?
I am still looking for Global Oxygen ROM for Oneplus 7T Pro, and I was luckily to saw your post about it.
---------- Post added 03-11-2019 at 12:05 AM ---------- Previous post was 02-11-2019 at 11:55 PM ----------
Can this use to flash from Hydrogen to Oxygen?
I am still looking for Global Oxygen ROM for Oneplus 7T Pro, and I was luckily to saw your post about it.
Can this use to flash from Hydrogen to Oxygen?
I am still looking for Global Oxygen ROM for Oneplus 7T Pro, and I was luckily to saw your post about it.
---------- Post added 03-11-2019 at 12:05 AM ---------- Previous post was 02-11-2019 at 11:55 PM ----------
Can this use to flash from Hydrogen to Oxygen?
I am still looking for Global Oxygen ROM for Oneplus 7T Pro, and I was luckily to saw your post about it.
Excellent, glad I could help. You can get it from Oxygen updater app, set the device to 7T pro EU set the update to full and set advanced to on, then it allows you to download it. Took me hours to even think of doing that.
Excellent, glad I could help. You can get it from Oxygen updater app, set the device to 7T pro EU set the update to full and set advanced to on, then it allows you to download it. Took me hours to even think of doing that.
There is no official global ROM available for 7T Pro at their support website the last time I check. But you had successfully convert from Hydrogen by using Oxygen updater? Is EU ROM different with Global ROM? I am living in Asia country.
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 7T in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus 7T to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
REMEMBER "Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
I ran all of them, in the same order (I put them in a bat file).
EDIT: Could you send me the flash-all.bat file included in your ZIP file? I have really bad internet here and unfortunately won't be able to download the entire ZIP just for that file. I already have the ROM ZIP file, with its payload extracted to get all the imgs.
EDIT 2: I fixed it. Apparently I was an idiot and stopped the process when the reboot command fired, since it rebooted into the OnePlus recovery mode and not fastboot mode, or so I thought, after which I'd go to Advanced > Reboot to fastboot, to enter the apparently "proper" fastboot mode and then continue the flashing. I didn't realize that my PC would recognize the phone as a fastboot device and continue flashing in the apparent OnePlus "recovery" mode itself. Thanks for you help anyways!
Can I use EU version rom in Indian OP 7T pro? Please help me. I was trying to root after updating to 10.0.4 and messed up and I am stuck at boot screen.
Wifi and Sim doesnot work and if i turnoff boot loade it says Your device is corrup
WiFi and Sim doesn't work and if i turnoff boot loader it says Your device is corrupt. my Device is HD1910 7T Pro 8/256.
Help me to flash clean stock firmware . i am facing software issue
Hi, I am using this to unbrick my oneplus 7t pro because of bootloop after enable back module on Magisk, after I did a OTA update to 10.0.5.
May I know is it I need to use 10.0.5 fastroom to successfully unbrick my phone? Because right now, after the "flash-all.bat" using 10.0.4 rom and reboot my devices, the phone still stuck at bootloop for a long time while I writing this comment.
If 10.0.5 fastboot rom is needed, may I know where can I get one or could you upload it here?
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 7T in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus 7T to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
REMEMBER "Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
