[ROM]○[SuperXE 6P]○[OREO]○[8.1.0]-[OPM2.029.A1/8.1.0_r21]○[AROMA]○[05/14/2018]

Search This thread

Aeonxul

Senior Member
Jan 28, 2013
147
20
www.last.fm
Yes his kernel and Franco kernel manager. After your post I checked to see if it was happening to mine and I just wasn't noticing. After looking explicitly for what you mentioned, I did notice a bit of a lag right when I enabled it for about 15 secs, but then it subsidies. In Dev options try turning window and transition animation scale to 0 and setting duration to 1x.. That seemed to nullify any lag in the ui after nightlight
Thanks for the tip. Got it. I will try both the kernel and the animation scale trick to see if that helps.

After a clean install, my Magisk is not passing the test.
After seeing your post, I just checked and mine passes safety net check on latest Magisk 15.3.
 

cedric1918

Senior Member
Apr 8, 2012
77
13
Bruxelles
First flash on my 6p and pictures with stock camera are upside down, is it a known bug ? How can I fix ?

Edit : Same bug when using camera NX with ZSL

Edit 2 : it appears that the full gyroscope/accelerometer doesn't work

Edit 3: FiXED ! (Probably got stuck when my little daughter trew the phone on the ground)
 
Last edited:

cedric1918

Senior Member
Apr 8, 2012
77
13
Bruxelles
Is there a way to disable charging light in custom build ? Temporary or permanently.

I know it can be "not activated" via stock build and aroma installer but I can't manage to have the full pixel experience with it. (Maybe I am just too stupid to get it right(
 

daswahnsinn

Senior Member
May 24, 2010
659
145
I'm using the latest version of this ROM, Feb security patch, and having issues with tethering. It works but I got an email from Sprint saying that I'm about to hit my 10gb limit. I've never had this issue, coming from from the latest PN ROM. Is there anything I can do or do have have to flash my backup of PN?
 

RayMcGrath

Inactive Recognized Contributor
Aug 29, 2012
2,500
3,555
Pacific Northwest
I'm using the latest version of this ROM, Feb security patch, and having issues with tethering. It works but I got an email from Sprint saying that I'm about to hit my 10gb limit. I've never had this issue, coming from from the latest PN ROM. Is there anything I can do or do have have to flash my backup of PN?
How much data did you use?
 

RayMcGrath

Inactive Recognized Contributor
Aug 29, 2012
2,500
3,555
Pacific Northwest
Around 9.1gb. When I was on PN I could use up to 100gb with no warning, so I was just wondering if this ROM reports it back.
This does not make sense to me. I don't think ROMs have the capability to hide the amount of data going through your provider's servers.
The 10 gig limit warning was valid then.
I'm not sure how you could use 100 gig and no one noticed.
 

daswahnsinn

Senior Member
May 24, 2010
659
145
This does not make sense to me. I don't think ROMs have the capability to hide the amount of data going through your provider's servers.
The 10 gig limit warning was valid then.
I'm not sure how you could use 100 gig and no one noticed.

I have only gotten this email twice before, I had to a line the build.prop, 'net.tether.noprovisioning=true' to get tethering working. Then I had to adb shell this line 'settings put global tether_dun_required 0'. Took me awhile to find the second bit.
 
  • Like
Reactions: RayMcGrath

LuisJugo33

Senior Member
Feb 12, 2018
52
5
Hola alguien me puede decir pq me sale este mensaje despues de instalar esta ROM ? Es normal ? Se puede solucionar?

Your device is corrupt. It can't be trusted and may not work properly.
 

daswahnsinn

Senior Member
May 24, 2010
659
145
Hola alguien me puede decir pq me sale este mensaje despues de instalar esta ROM ? Es normal ? Se puede solucionar?

Your device is corrupt. It can't be trusted and may not work properly.

No he visto un mensaje como ese mostrando cualquier ROM. Creo que sería mejor volver a descargarlo y actualizarlo. Lo siento usando Google translate.
 
  • Like
Reactions: LuisJugo33

LuisJugo33

Senior Member
Feb 12, 2018
52
5
No he visto un mensaje como ese mostrando cualquier ROM. Creo que ser

---------- Post added at 07:45 PM ---------- Previous post was at 07:43 PM ----------

No he visto un mensaje como ese mostrando cualquier ROM.

when I charge the stock ROM it disappears. but when I put the SuperXE 8.1 ROM, I get that message! I do the steps at the bottom of the letter as it says at the beginning ... then I close the bootloader and the message appears
 

daswahnsinn

Senior Member
May 24, 2010
659
145
No he visto un mensaje como ese mostrando cualquier ROM. Creo que ser

---------- Post added at 07:45 PM ---------- Previous post was at 07:43 PM ----------

No he visto un mensaje como ese mostrando cualquier ROM.

when I charge the stock ROM it disappears. but when I put the SuperXE 8.1 ROM, I get that message! I do the steps at the bottom of the letter as it says at the beginning ... then I close the bootloader and the message appears

¿Qué recuperación estás usando, como TWRP?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 189
    STOCK BASED ROM 8.1.0-OREO (OPM2.029.A1, May 2018.)


    System :
    - Android 8.1.0 opm2.171019.029.a1,May. 2018)
    - Stock kernel 3.10.73
    - Easy installation through the Aroma

    Installation:
    - Reboot to recovery
    - Take necessary backups
    - Wipe system/data/cache
    - Flash the appropriate vendor.img
    - Flash Rom.zip
    - Reboot to system
    - Enjoy

    What is working:
    - Everything

    Contributors:
    - cile381

    Credits:
    - Google/AOSP

    XDA: DevDB Information
    SUPERXE AOSP ROM for the Nexus 6P

    ROM OS Version: 8.1.0-Oreo
    Kernel: Linux 3.10.73
    ROM Vendor:8.1.0 (opm2.171019.029.a1)
    Based On: Google/AOSP

    Version Information:
    Status: Stable


    DOWNLOAD ROM 8.1.0-OPM2.171019.029.A1
    MD5 [fc884c4e09fad95c27b79cf606ec9158

    VENDOR IMAGE 8.1.0-OPM2.171019.029.A1
    MD5 [ec5d30b20fb022df2fe26a5b4ef8a0d4

    Created 2017-07-25
    Last Updated 2018-05-14




    DONATIONS
    @Signal2Noise
    @hawgguy
    Bee venom collector
    @Samuel Holland
    103
    CUSTOM BUILT ROM 8.1.0-OREO (android-8.1.0_r21)


    System :
    - Android 8.1.0_r21
    - Kernel 3.10.73

    Clean installation is required!

    Installation:
    - Reboot to recovery
    - Take necessary backups
    - Wipe system/data/cache
    - Flash ROM
    - Reboot to system
    - Enjoy

    What is working:
    - Everything

    Vendor is included in the ROM and does not need to be installed separately!
    Do not install stock vendor on this ROM!


    Contributors:
    - cile381

    Credits:
    - Google/AOSP

    XDA: DevDB Information
    SUPERXE AOSP ROM for the Nexus 6P

    ROM OS Version: android-8.1.0_r21
    Kernel: Angler/Linux 3.10.73
    ROM Vendor:8.1.0 (OPM3.019/custom)
    Based On: Google/AOSP

    Version Information:
    Status: Stable

    If you change the kernel or any part of the system and after that you have a problem, please do not post any questions in this thread.


    DOWNLOAD ROM SUPERXE-8.1.0_r21
    MD5 641d3bb35cbf4f3b0e457b3c52480fa3

    Root - Magisk 16.3


    Created 2017-10-03
    Last Updated 2018-04-11



    43
    Update!
    -Base 8.1.0-OPM1.171019.011
    -Stock kernel 3.10.73 - disabled forced encryption,dm-verity check
    -Updated add-on apps
    -Aroma installer
    * If you receive a notification of a system upgrade after installation - unenroll your device from the Android O Beta Program :)
    Enjoy!
    38
    Update!
    Stock based Rom is updated to 8.1.0 DP
    -Base OPP5.170921.005
    -Stock kernel
    -Pixel 2 mod(sounds,wallpapers,launcher,night light,ambient display...)
    -Aroma installer
    I hope you like it :)
    38
    UPDATE!
    SUPERXE ROM - 8.0.0!
    -Base 8.0.0 (OPR6.170623.017, September 2017)
    - Fixed minor bugs in Aroma installer
    - Updated apps
    - Option for selective installation ( Magisk,Viper,Substratum,Pixel Blue Accent Color... etc)
    - Option to delete the system apps
    - Charging notification light (now works with Substratum)
    It can be installed directly from the OPR6.013, but a clean installation is recommended!
    Enjoy!