• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM] [TREBLE] [10.0] [Official] AICP 15.0 (Pro3 aka zl1, zl0, X727,X720,X722)

Search This thread

mosimchah

Senior Member
Dec 7, 2014
4,198
9,436


logo_black.png


AICP
Android Ice Cold Project

AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!

Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.

If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!


Code:
#include <std_disclaimer.h>

/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/

features.png

Feature list (rough overview)


credits.png


In the beginning we would like to thank:

GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...

team.png


@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"

...


donations.png


We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!



downloads.png


Latest Stable Release Version 15.0

Download link: https://dwnld.aicp-rom.com/

Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.


Test builds: https://drive.google.com/open?id=1YBhi3TEGJb4NG5kFhekQiBrNiczu3m78

changelog.png


Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)

Gapps: https://opengapps.org/ (Use nano or Micro, I have only tested nano)

20s firmware https://androidfilehost.com/?w=files&flid=165490
If you're dirty flashing, you might need to delete the locksettings.db file in /data/system

TWRP:
https://forum.xda-developers.com/t/...leeco-le-pro3-x727-x720-x722-zl1-zl0.4217101/

issues.png


You tell... :p

FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.

Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!

Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.

Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .

Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...

Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.

Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.

Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.


Using the ROM:

Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.

Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this

Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)

Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.


instructions.png


The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.

It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.

How to flash for the first time:
(Again: Don't do it if you don't know!)

1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!


The ROM has GApps persistence in between dirty flashes, so you only have to flash them once (unless if you wipe the system)!



Currently supported Root Solution:

Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash unless if you wipe the system

PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.

sources.png


If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)

Kernel source:

https://github.com/AICP/kernel_leeco_msm8996/tree/q10.0

Device trees:
https://github.com/AICP/device_leeco_zl1/tree/q10.0
https://github.com/AICP/device_leeco_msm8996-common/tree/q10.0

Vendor:
https://github.com/AICP/proprietary_vendor_leeco/tree/q10.0


ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds

XDA:DevDB Information

AICP, ROM for the LeEco Le Pro3
Contributors:
andr68rus,
infrag,
darkobas,
jrior001,
codeworkx,
villarleg,
wartomato,
ThE_MarD,
Lucchetto00,
mosimchah

ROM OS Version: 10.0.0 Q
Kernel: Linux 3.18.140

Version Information:
Status:
Stable/Weekly
Release Date: 2019-09-18

You want to see a "normal" night at the "DEV office", click You want to see a "normal" night at the "DEV office", click here!!
 
Last edited:

javizeta

Member
Sep 29, 2012
30
21
Madrid, España
Note: I have not tried magisk with Q yet, not sure if it will work, I would try the latest Canary build if you want it


Thank you for your work. What is Canary? Testing on my X722 and on Google Play it appears as an uncertified device

Gracias por tu trabajo.

Que es Canary?

Probando en mi X722 y en Google Play aparece como dispositivo no certificado


EDIT BY MOD: As per the rules of XDA, all posts must be in English. If you are not proficient in English, use an online translator like Google Translate. You can add the post in your language, if you wish, below the English one as I have done here.
 
Last edited by a moderator:

mosimchah

Senior Member
Dec 7, 2014
4,198
9,436

tsongming

Senior Member
Aug 19, 2016
3,346
3,415
52
Congrats Moshe! Wow!!!!

I no longer have a working Le Pro 3 so I can't try it.
Nonetheless, I am buying my daughter an Xiaomi A3 and as soons as that thing arrives I will check this one out on her X727. Really great job and by the way, Magisk will not work right now.

It does not work on any A device at the moment ( at least not that I am aware of ) However, John Wu is working on it.
Updates are here: https://twitter.com/topjohnwu?lang=en

There is a temporary way to get it working by directly including su binaries in the ROM. This method works for the mi8.
 
Last edited:

Redhawk2000

Senior Member
Jun 1, 2016
846
463
Congrats Moshe! Wow!!!!

I no longer have a working Le Pro 3 so I can't try it.
Nonetheless, I am buying my daughter an Xiaomi A3 and as soons as that thing arrives I will check this one out on her X727. Really great job and by the way, Magisk will not work right now.

It does not work on any A device at the moment ( at least not that I am aware of ) However, John Wu is working on it.
Updates are here: https://twitter.com/topjohnwu?lang=en

There is a temporary way to get it working by directly including su binaries in the ROM. This method works for the mi8.

Sounds like he just fixed it with 19.4 ?
 
  • Like
Reactions: tsongming

Top Liked Posts