• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

[ROM][Treble][8.1][31/05][OFFICIAL] CrDroid 4.2 for Huawei P8 lite 2017

Status
Not open for further replies.
Search This thread

PPCholic

Member
Jan 3, 2008
19
8
So , error 7 , my device isn't a kirin970 :/ ( stock oreo pra-lx1c432 )

P.S.: I modified the script and still doesn't work .


same here.
In TWRP it says
no Digest file found
E3004: This package is for device: prague, kirin970; this device is lld.
Updater process ended with ERROR: 7
Error installing zip file '/erxternal_sd/crDroidAndroid-8.1-20180521-prague-v4.3.zip'

that's it

Is it possible to build a bat file to install it correctly?
thanks in advance
 

PPCholic

Member
Jan 3, 2008
19
8
Ok,
I sucessfully installed CrDroid_CARNERA_r3 as system.img via this installing guide by Askuccio_DROID.

"1. Download the Rom, the Gapps and the RecoveryStock (Download the Gapps and RecoveryStock on the SD Card and Download the ROM on the PC) (you will find all the links below)
2. Go to fastboot mode in your phone and connect it to your pc and open fastboot
3. Type
Code:

fastboot flash system theromfile.img

4. Go to the TWRP and click Install >> Select Storage >> Micro SD Card and select the Pico Arm64 Gapps 8.1
5. Go back to the TWRP home page and click Install >> Select Storage >> Micro SD Card >> Install Image and select the RecoveryStock.img, select the Recovery Ramdisk partition and swipe
6. Go back to the TWRP home and click Reboot >> Recovery
7. Click Wipe Data and Wipe Cache
8. Click Reboot system now and enjoy your ROM! "

this worked, but there was no NFC in the r3 version, thats why I tried to flash the crDroidAndroid-8.1-20180531-prague-v4.3.zip. like the guide above, but instead of flashing via adb I installed it on TWRP (twrp-3.2.1-v3.5-emui-8.0-prague.img)
installing was without problems, afterwards gapps64 8.1 and flashing stockrecovery-> reboot in stock recovery
i have wipe data and cache and then rebooted.
than the bootloop began.
could you please make an system.img file from the last version, for adb to try that out?
thanks a lot

---------- Post added at 09:04 PM ---------- Previous post was at 08:42 PM ----------

I have installed it again like in this guide:
1) Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data
4) Flash ROM, without errors
8) Flash gapps, without errors
9) Boot up
10) BOOT LOOP.

:(
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 12
    Code:
    #include "std_disclaimer.h"
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */

    crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!

    crdroid.png


    Features
    Click for feature list

    INSTALLATION INSTRUCTIONS
    Flashable via adb with
    Code:
    fastboot flash system <imagename>
    plus /data partition wipe via TWRP

    CHANGELOG
    Click here for the changelog

    Downloads
    CrDroid-CARNERA_r4

    DOWNLOADS ARE NOW MOVED OVER https://crdroid.net/dl.php

    Kernel and GPL concerns
    I'm actually not violating any GPL license due to the unreleased kernel source from Huawei.
    The kernel used here, it's just the stock one without anykind of modification.
    As the kernel sources will be released by our beloved Huawei Opensource department, it'll be added over here.


    Support
    I'm do offering support and some chitty-chat times over this Telegram group (over XDA support of course).
    Feel free to join.

    XDA:DevDB Information
    CrDroid, ROM for the Huawei P8lite/P8 Lite

    Contributors
    dil3mm4.dev, phhusson
    ROM OS Version: 8.x Oreo
    ROM Kernel: Linux 4.x
    ROM Firmware Required: EMUI 8 or other Android 8 ROM.
    Based On: LOS

    Version Information
    Status: Testing

    Created 2018-05-04
    Last Updated 2018-05-31
    5
    Changelog
    CrDroid-CARNERA_r1
    -Fixing the rare issue about /system partition not mounting
    -Now the /system size is unified to work over EU and CN firmwares.
    -Fixed camera shutter latency

    Download
    CrDroid-CARNERA_r1


    THIS ROM IS NOW MAGISK ENABLED AS YOU CAN SEE IN THE SCREENSHOT!
    FOR FURTHER INFOS, JOIN THE TELEGRAM GROUP
    5
    CHANGELOG
    - This is a flashable zip
    - NFC has been fixed
    - No more need to push adb commands for the fingerprint navigation, it is inherited in settings disabling navbar on screen
    (LOS BASED ROMs)
    - Improved overall stability
    - Built-in styles are now fixed (LOS BASED ROMs)
    - OTA updates (CrDroid)

    DOWNLOADS
    https://crdroid.net/dl.php
    or
    https://androidfilehost.com/?w=files&flid=272699
    4
    Changelog
    -V4A should now work
    -Performance and stability fixes

    Downloads
    CrDroid-CARNERA_r3
    3
    CHANGELOG
    -Fingerprint navigation is now properly implemented with swipes up/down to collapse/expand statusbar
    (if it's still not working launch this adb command, adb shell settings put secure system_navigation_keys_enabled 1)

    -Upstreamed to r26

    -May security patches

    DOWNLOAD
    CrDroid-CARNERA_r4