[ROM][TW][Aroma][AOD]AryaMod Note7 Port V2.1[EOL]

[techdude18]

i flashed this rom 2 days before and i was in shock to see that within 2 days Android OS used my 5.10 GB data .

Do you know how to freaking read

ITS WIFI

---------- Post added at 12:45 PM ---------- Previous post was at 12:36 PM ----------

hım, i think i make a mistake anywere the best i flash the rom again. i hope i make no mistakes anywhere.
have you a restarting problem? my phone restart spontaneously ??

I suggest you use another rom

 

[Srebroo]

Is that battery consumption is normal.?
I have only 2. 30 h screen on

 

[Eleo]

Is that battery consumption is normal.?
I have only 2. 30 h screen on

It depends on you use. Install gsam battery monitor app and share the screenshots of first screen + app usage page. It is possible to get low sot if you used phone a lot. If not, then you might want to change your kernel, tweak apps from device maintenance/battery section or just buy a new battery

Sent from my SM-N930F using XDA Labs

 

[|mickey]

Does anyone knows how can I do screen mirroring to Samsung TV on this rom?
Thank you in advance

Hi, it's very simple! First male sure you have the app Samsung Smart view updated, after you check that you either use the app to connect to the TV, in case you want to share the phone screen there, or just use cast to send videos pics or even YouTube videos to the TV...

I can even simply use quick connect or smart view toggle on the quick settings panel, it works quite well!!

---------- Post added at 01:19 PM ---------- Previous post was at 01:14 PM ----------

hım, i think i make a mistake anywere the best i flash the rom again. i hope i make no mistakes anywhere.
have you a restarting problem? my phone restart spontaneously ??

Pls ignore that you should use another rom, this one works fine... Have you formated cache /Dalvik? And even system?
If not, do it, then flash the rom and you should be fine...

 

[Srebroo]

The battery is almost new, has two months. I'm on all the time LTE.

 

[fatpo]

Pls ignore that you should use another rom, this one works fine... Have you formated cache /Dalvik? And even system?
If not, do it, then flash the rom and you should be fine...[/QUOTE]

first i have make a wipe cache partition and wipe data/factory reset to my stok rom. next Do a FULL wipe: Dalvik Cache, Cache, Data, System with TWRP 2.8.7.0 and install the rom. in setting wizard i uncheck diagnostic data and next i flash shinto kernel and reboot system.

 

[calatino]

How to have S7edge People Edge on this Rom?

Inviato dal mio SM-N930F utilizzando Tapatalk

 

[Eleo]

first i have make a wipe cache partition and wipe data/factory reset to my stok rom. next Do a FULL wipe: Dalvik Cache, Cache, Data, System with TWRP 2.8.7.0 and install the rom. in setting wizard i uncheck diagnostic data and next i flash shinto kernel and reboot system.

Try with lss3.7 or lss3.8. Maybe shinto kernel is not stable on your model

Sent from my SM-N930F using XDA Labs

 

[fatpo]

Try with lss3.7 or lss3.8. Maybe shinto kernel is not stable on your model

Sent from my SM-N930F using XDA Labs

i dont know have i understand it tru but my model is n9005.

 

[kender]

hım, i think i make a mistake anywere the best i flash the rom again. i hope i make no mistakes anywhere.
have you a restarting problem? my phone restart spontaneously ??

For me it was such that the Shinto kernel at reviving the phone and the battery life was good. Therefore, I stood back from the LSS kernel!

kender

 

[Yumiko87]

Pls ignore that you should use another rom, this one works fine... Have you formated cache /Dalvik? And even system?
If not, do it, then flash the rom and you should be fine...

first i have make a wipe cache partition and wipe data/factory reset to my stok rom. next Do a FULL wipe: Dalvik Cache, Cache, Data, System with TWRP 2.8.7.0 and install the rom. in setting wizard i uncheck diagnostic data and next i flash shinto kernel and reboot system.[/QUOTE]
Sound is good for your installation method.
Try to use the kernel in the aroma rom then boot to the device. After that try with your multitasking in the device to test the stability.
If no random reboot issues then only come to flash Shinto with a cleaner script.

 

[fatpo]

first i have make a wipe cache partition and wipe data/factory reset to my stok rom. next Do a FULL wipe: Dalvik Cache, Cache, Data, System with TWRP 2.8.7.0 and install the rom. in setting wizard i uncheck diagnostic data and next i flash shinto kernel and reboot system.

Sound is good for your installation method.
Try to use the kernel in the aroma rom then boot to the device. After that try with your multitasking in the device to test the stability.
If no random reboot issues then only come to flash Shinto with a cleaner script.[/QUOTE]

thanks for help but i dont know how i make that all that you say this is my first rom flashing i am just a novice

 

[Eleo]

thanks for help but i dont know how i make that all that you say this is my first rom flashing i am just a novice

Let me translate what she said:
Clean instal ROM and dont change kernel, use the one included in ROM (should be lss3.7). Then open some apps and check whether there is a lag issue by moving between apps. After being sure that ROM is stable, flash kernel cleaner script, then flash shinto kernel.

Sent from my SM-N930F using XDA Labs

 

[karkasss]

AryaMOD Note7 addon by NXTeam


V5 changelog

- Smart Manager selection added (C5, S7, N7 / UDS, Non-UDS)


V4 changelog

** Fixed Private mode (Only on/off from Settings)
** Fixed Lockscreen lag (Removed ambient display mod)
** Fixed abnormal behavior of manual brightness control (Max brightness after reboot when Min brightness set)
** Fixed Video player FC when click "List" during horizontal playing
** Fixed Settings-Account-Backup and reset-Auto restart-Time FC
** Optimized Bluelight filter opacity
** Updated NX-Settings App
- Quick panel blur (Enable/Disable)
- Control min/max range for AOD auto brightness
** Fixed touch fc for AOD notification icon such as +1, +2 icon when over 4 noti icons stacked)


V3 changelog

1.Camera MOD (S7/N7)
- All non-working shooting mode removed
- Working mode from galaxy apps was preinstalled
2.AOD Settings (by NX Control app)
- Disable AOD Touch in the pocket
- Enable/Disable AOD Touch
- AOD Auto/Manual Brightness Control
3.Settings - Iris menu removed (Thanks @Subin khan)
4.Data usage text position optimized
5.People edge layout optimized
6.Latest Clock app


V2 changelog

- Fixed Bluelight filter
- Add AOD touch
- Changed statusbar icon defualt color in dark mode (Black -> Gray)
- Removed the blur option of notification panel from RomControl
(Blur effect removed permanently, AOD quick toggle is always shown)
- Fixed flashlight brightness control on Quick toggle
- Fixed abnormal behaviour of pop-up view
(Message poped up "This app does not support pop-up view" when reduced again for any apps)
- AOD brightness control menu in RomControl/Framework & general menu
- Removed GIF maker button on Samsung video player.


Download : https://drive.google.com/file/d/0ByMmvUc7Ihtma3FqWlhndVJyMms/view?usp=drivesdk

 

[Kamy]

Like added thanks @karkasss

 

[kopitalk]

Like added thanks @karkasss

Hi Kamy any clue to add data usage entry/calibration so that data usage reflects actual data consumption? Maybe I can be of help updating it :silly:

 

[Kamy]

Hi Kamy any clue to add data usage entry/calibration so that data usage reflects actual data consumption? Maybe I can be of help updating it :silly:

Not sure what and why are you going to have this

 

[examiner]

@karkass theres a bug in nx setting/aod screen.. the clock is ahead of 1 hour?..anyway its not a big deal.thanks again for the add on.

 

[calatino]

Update without cleaning cache and davil?

Inviato dal mio SM-N930F utilizzando Tapatalk

 

[kopitalk]

Not sure what and why are you going to have this

Let say your data plan is 4Gb every month, and billing period is 16th of the month to 15th of the following month, so when you set up the data usage reading today, you need to enter whatever data amount has been used since 16 Nov to 9 Dec in order for the reading to be accurate.

Anyway, mate.. I can use 3rd party app to do this as well.. not a biggie. Sorry!