[ROM][UB][5.1.x][TabZ]GZR Validus 8 ROM official builds

plutozz

Senior Member
Jan 2, 2009
126
19
18
sorry to say, pollux windy latest version doesn't boot just like the previous version. At least that's what happened in my case.
 

bgx

Senior Member
Dec 23, 2010
580
127
0
Hey advice some help. After flash boot.img on my windy I stuck with a red light and tablet doesnt do anything. Can't turn on nothing. :( what do I wrong?
 

scoobyjenkins

Senior Member
Jul 8, 2012
3,676
4,830
263
Leeds
Hey advice some help. After flash boot.img on my windy I stuck with a red light and tablet doesnt do anything. Can't turn on nothing. :( what do I wrong?
After you flashed boot.img did you then power on and see a purple led or only a red one? If purple, hold vol down until it turns yellow (maybe vol up, depending on the kind of recovery that's in the boot image) If red, try fastboot flash the boot.img from latest omnirom (even if it's kitkat it's fine, you just need it for recovery) then power on and when you hopefully see a purple led, hold vol down, you should see a yellow led and then you should boot into TWRP. From there, flash rom and other zips. Depending on what you had running before wipes may be required. I don't recommend choosing the factory reset option as that lost my internal storage before when it's not supposed to! I would choose advanced wipe and tick cache, dalvik, system, data and if you want to (and backed up files first) tick internal storage making sure your zips are on extsd. The last 2 builds are reported not booting, so go ahead and grab the build from May 1st.

Tapatalked that shiznit.
 
  • Like
Reactions: Alx31 and bgx

bgx

Senior Member
Dec 23, 2010
580
127
0
Thx. That was the first I would to try but unfortunaly after the flash of the boot.img the tablet isn't recognized anymore on my windows pc. :( when I plug in with volume down or up no light. Only when I plug it out and long press it flashes one time white or when I longer press with volume up it flashes 3 times white but thats everything. I hope I did not broke it? Will later try again when I get home. Perhaps I have flashed the wrong one? I have an SGP321 with Wifi and LTE and flashed the bootimg from the pollux windy zip. Was that wrong?
 

scoobyjenkins

Senior Member
Jul 8, 2012
3,676
4,830
263
Leeds
Thx. That was the first I would to try but unfortunaly after the flash of the boot.img the tablet isn't recognized anymore on my windows pc. :( when I plug in with volume down or up no light. Only when I plug it out and long press it flashes one time white or when I longer press with volume up it flashes 3 times white but thats everything. I hope I did not broke it? Will later try again when I get home. Perhaps I have flashed the wrong one? I have an SGP321 with Wifi and LTE and flashed the bootimg from the pollux windy zip. Was that wrong?
I have Pollux_Windy, don't know about Pollux but if there's an Omni build for Pollux, try the boot image from that?

Tapatalked that shiznit.
 
  • Like
Reactions: Alx31 and bgx

bgx

Senior Member
Dec 23, 2010
580
127
0
Ok I googled and see I have installed the wrong boot.img. That seems the reason it doesn't start anymore. I need pollux not windy. What can I do if the tablet isn't recognized anymore?
 

scoobyjenkins

Senior Member
Jul 8, 2012
3,676
4,830
263
Leeds
Ok I googled and see I have installed the wrong boot.img. That seems the reason it doesn't start anymore. I need pollux not windy. What can I do if the tablet isn't recognized anymore?
You've made sure it's powered off? (pressing power button once doesn't light the screen up briefly?) If it's powered off and no longer recognised by PC in fastboot mode, maybe you'll have to flash an ftf in flash mode. Flashtool is a handy program, nice and easy. Other than that, I don't know but I would keep Googling! Best of luck.

Tapatalked that shiznit.
 
  • Like
Reactions: Alx31

[email protected]

Senior Member
Sep 3, 2012
377
74
58
Vantaa
Last rom i didnt get working, but this seem to be GREAT!! I have waiting new themes section, and now its great!!!
Just installing my 450 apps at play store, but soon i will get it testing.. :good::good::good::good::good::victory:
 
  • Like
Reactions: Alx31

Azazel Azay

Senior Member
Dec 20, 2013
156
41
28
New Delhi
I flashed pollux build this morning, after optimizing apps it again went to boot animation and again optimizing apps... I don't know what happened ? i restored my backup of cm and same happened with that ? after force rebooting cm booted up normally ?