• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

[ROM][UNOFFICIAL][10.0][G920/5-F-I-S-K-L-T-W8]Pixel Experience Plus[AOSP][24/09/2020]

Search This thread

andyyy1

Member
Oct 26, 2019
16
3
I do have the same problem. It stucks at the G logo and the progress bar. It stays there foreever.

How do I get back into TWRP to start over again? POWER + VOLUME UP + HOME does not work.

Edit:

Now I was able to get into TWRP. The issue is PE will install on its own okay. But once I try to install the latest magisk.zip the PE stucks at the boot.

The first thing I noticed. The buttons below the screen are not working (Home, Back and the left one). Any idea?
The option was not turned on.

Magisk:
I tried at the other way around. Installed the Magisk Manger and from there the *.zip.

The error appears:

!Unsupported/Unkown image format
!Installation failled


Thanks!
 
Last edited:

Whal

Member
Aug 8, 2020
7
0
I do have the same problem. It stucks at the G logo and the progress bar. It stays there foreever.

How do I get back into TWRP to start over again? POWER + VOLUME UP + HOME does not work.

Edit:

Now I was able to get into TWRP. The issue is PE will install on its own okay. But once I try to install the latest magisk.zip the PE stucks at the boot.

The first thing I noticed. The buttons below the screen are not working (Home, Back and the left one). Any idea?
The option was not turned on.

Magisk:
I tried at the other way around. Installed the Magisk Manger and from there the *.zip.

The error appears:

!Unsupported/Unkown image format
!Installation failled


Thanks!
how did you solve i
 

andyyy1

Member
Oct 26, 2019
16
3
Press VOLUME DOWN + POWER for few seconds. The phone reboots and straight after that press POWER + VOLUME UP + HOME to enter TWRP again. I needed a couple of times. The timing is important. In TWRP just install PE without Magisk. At least in my case the PE boots as supposed to be.

Magisk issue:

I got it installed. From TWRP I installed an older Magisk version (20.2). PE bootet up as usual. From the Magisk manager I was able then updating to version 21.4. I just don't know why I wasn't able to intall 21.4 straight from TWRP.
 

ahsanmoin95

New member
May 26, 2019
1
0
Hello, sorry I'm late to the party.

I have a G920P and I was able to install the zerofltecan version. The rom installed easily but the touch is not working, also the SIM is not detected. Is there anything that could be done? @Exhigh
 

Angel died

New member
Apr 19, 2020
2
0
Thank you for making this ROM
But it has three important bugs 1: The camera is very unstable 2: The dual SIM card sometimes does not work (I flashed the patch) 3 There are no options to disable or disable fast charging
I also feel the battery consumption is higher than the stock ROM
Anyway, it's one of the best ROMs I flashed in the hope of a better recovery:)
 
Nov 7, 2020
2
0
Must say that this is the greatest rom ive flashed in a Long time. Only 1 issue. In call echo. In om a s6 Edge and i havent been able to solve it in any og the roms ive flashed. Plz help. I do not want to go stock. It blows. BR Jon
 
Hey , thank you very much for that ROM, I was looking for something "Up To date" and buddy, you've made my day ! So good to see that this phone is still living a bit :)
For my part, everything OK for the moment. Just one thing, I cannot use all three physical buttons that are on the lower side of the phone ( "menu/recent apps", "go to launcher" and "back"). "Lock button" and "Vol + and -" are working. I can still use phone with movements but still, it's shocking me on a S6 ^^ Is there a solution to this ? (I'll just reinstall to see if I missed something).
Edit 2 : Works like a charm, I did modified that option in settings>system>buttons> First setting <3.
 
Last edited:
Can someone enlighte me how is this rom in terms of reheating?
I'm currently on Evolution X but it reaches almost everytime +36⁰C (sometimes 39⁰C).
Terrible experience. My phone literally becomes untouchable because of the heat. Probably both rom use the same kernel, and has gapps preinstalled, so you won't really notice a difference between the two.
 
  • Like
Reactions: vvvalente

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    https%3A%2F%2Fi.imgur.com%2FGtwTyCR.png

    PixelExperience Plus for Samsung Galaxy S6 & S6 Edge

    What is this?​
    Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)

    Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device

    Based on Android 10.0



    Whats working?
    Wifi
    RIL
    Mobile data
    AOD
    DT2W
    GPS
    Camera
    Flashlight
    HWC
    Camcorder
    Bluetooth
    Fingerprint reader
    Lights
    Sound / vibration


    Known issues
    You tell me

    DON'T FLASH GAPPS, ALREADY INCLUDED

    Donate
    Liked The work? Consider a Donation
    Exhigh

    Translation​
    Stay tuned​

    Installation
    First Time Install / Clean Flash
    - Make sure you're running the latest TWRP
    - Boot into recovery
    - Wipe > Advanced Wipe:
    * Dalvik Cache
    * System
    * Data
    * Internal Storage
    * Cache
    - Flash ROM
    - Flash The Audio Patch (US Variants) Only
    - Reboot to recovery (optional)
    - Flash Magisk.zip (optional)
    - Reboot to system


    Update / Dirty Flash
    - Boot into recovery
    - Flash ROM
    - Flash The Audio Patch (US Variants) Only
    - Reboot to recovery (optional)
    - Flash Magisk.zip (optional)
    - Wipe Cache
    - Reboot to system


    Do not dirty flash, If your using any other ROM or even if you're on Android 10

    I Would Strongly Recommend Reading The Changelog & The F.A.Q Section Below Before Proceeding To Download and Use the ROM

    Download
    Zeroltexx(G925/F-I-S-K):​

    Note: For Both The US Variants Below, You Must Flash The Attached Audio Patch
    Read The Installation Instructions Above


    Zerofltecan(G920/L-T-W8):​
    * Audio Patch: https://www.androidfilehost.com/?fid=8889791610682938752
    Zeroltecan(G925/L-T-W8):​
    * Audio Patch: https://www.androidfilehost.com/?fid=8889791610682938749


    Join Our Telegram Chat Group:
    t.me/PixelExperienceZero

    XDA: DevDB Information
    PixelExperience Plus 10, ROM for the Samsung Galaxy S6 & S6 Edge

    Contributors
    * Exhigh

    Special Thanks To: JoshuaDoes, ananjaser1211, Lunarixus
    Thanks To: ripee, xSil3nt
    Thanks To The Testers: Nikita, Abed, YouJing, Mad, Matt and to the rest of the testers.

    ROM OS Version: Android 10
    ROM Kernel: Linux 3.x
    Based On: AOSP

    Version Information
    Status: Stable

    Created 08-09-2020
    Last Updated 24-09-2020


    Screenshots
    1
    Hi, I've started to get crashes on Device Health Services, unsure since when because I've probably just not noticed it much before.

    msg: java.lang.IllegalStateException: Turbo installed on a device without a default curve.
    stacktrace: java.lang.RuntimeException: An error occurred while executing doInBackground()

    Has anyone got any idea what to do about it? As I've not seen other issues related to this I'm guessing I can just ignore it :)
    1
    I'm a bad forum user and keep posting things in the wrong thread. I had a weird issue with this set of ROMs, and I'd love to use them.

    I have an S6 from Bell Canada. It should be G920W8, but it reports itself as G920F. I don't know of things that can change that reporting. The build for G920F works, but it fails to detect the SIM. I've tried many reinstalls, and other online fixes.

    The build for G920W8, however, will not install. It says it is for zerofltecan, which my device is not (as far as I can tell, my device is zeroflte, but zerofltexx builds usually work fine).

    My only other issue I had the whole time testing this out was that the hardware buttons are turned off by default, and the gesture/swipe buttons were not working, including the home button. This is fixed by opening settings first after launch. Anything else and I was stuck.

    Compared to other ROMs, this one really started up in a flash. Very snappy. I don't plan on restarting my device often, but it really felt good.

    If your sure that your device is the G920W8, try flashing the twrp of the model on your device and try flashing the appropriate Rom Zip for your Mobile and let me know.

    Cheers
    1
    Some feedback after a month of use (G920F version):

    Firstly, thank you really much for this ROM, it's a really fast one, and with the fewest bugs I tried!

    The feeling of the battery draining after the ROM being used is natural, as for the battery draining overnight as I have mentioned in the above post, try finding the rogue application/applications that are causing the system to hold wake-locks and not go to sleep.

    As for the restarts, those are being also looked into , as i think they are most probably due to the SystemUI crashing issue and will hopefully solved in the future.

    As for applications like Netflix not appearing, sad to say but you need to be rooted using magisk with magiskhide enabled, for Netflix to work on our old devices.

    The camera is something that probably won't improve its condition as the whole implementation and just the huge pain in the back it is to just get working, its just the nature of samsung's camera blobs are, basically we are patching these blobs to work on newer versions of android glitches and problems with the camera are part and parcel of samsung camera in custom ROM's

    Reminder: As for the battery in general these devices are as of now nearly 6 years plus old, how much ever magic i try stuffing into the Rom there is a limit as to how much the phone can do.

    P.S I can't seem to quote your entire post due to character limitations from XDA

    Cheers, Hope You Enjoy The ROM
    1
    merhaba

    rom gerçekten harika 15 gündür kullanıyorum çok sorunla karşılaşmadım..

    sorunlarım şöyle.

    1- batarya biraz çabuk bitiyor
    2-güç tuşu veya ev tuşuna basınca cihaz yeniden başlıyor
    3- yeniden başladığında takılı takılıyor. üç tuş ile yeniden başlatmak zorunda kalıyorum.

    eğerki bunları düzeltebilirsek yazılımın sorunu yok

    kamera içinde ben footaj camerayı kullanıyorum bence harika

    Translation:

    Hello there

    the rum is really great I have been using it for 15 days I haven't encountered many problems ..

    my problems are as follows.

    1- battery drains a little quickly
    2-Pressing the power button or home button restarts the device
    3- When it restarts it gets stuck. I have to reboot with three keys.

    If we can fix them the software has no problem

    I use footaj camera in camera I think it is great