[ROM][UNOFFICIAL][10] LineageOS 17.1 [T713][T719][T813][T819]

Search This thread

edufur

Senior Member
Sep 27, 2007
1,182
122
Hillsboro
Yes, I get the lineage os animation. Then I do the force restart, it goes to the lineage animation for a bit, then reboots into recovery.
I had that happen to me once or twice too. Did you try alternate gapps? nano and pico? Also, always remember when try a new flash, the second reboot is key. At least it was for me.
 

nachovb

New member
Aug 21, 2020
4
2
Hi,

I've been using official LineageOS 16 until recently, when browser apps started to fail, so I decided to give LineageOS 17 a try.

Following the instructions I've got the same result. Forced reboot in first boot, but following boots ended up in rebooting to recovery. Then as someone suggested in this thread, used mindthegapps and that solved the problem.

Now everything works fine except for PayPal app, which crashes all the time.

I've got magisk with magisk hide props and signature to Galaxy Tab S2 with nougat (android 7). Besides PayPal I have two other banking apps working fine.

Anyone having the same problem with PayPal? Any clues why it's not working?

Thanks for your help and to the dev for continuing support with this awsome ROM
 

zegaitolas

Member
May 5, 2022
5
0
Yes, I get the lineage os animation. Then I do the force restart, it goes to the lineage animation for a bit, then reboots into recovery.
See my post maybe a week back. I tried with mind the gapps and it worked for me. I have a detailed explanation of how it worked for me you might want to check it out
 

lunaboy73

Member
Jun 28, 2017
6
2
on LOS 16 I'm having some sort of trust zone issue, and can only flash 17.1, I'd prefer a more mature build that has less issues, youtube for example crashes for me on 17.1 and the device tells magisk modules that it has a snapdragon 617 instead of the 652 is actually has so I can't flash newer adreno drivers that might fix the issue, I'd also prefer to have SELinux enforcing.

How do I flash the rom without getting the trust zone issue? I'm using TWRP 3.5.2_9-2
I have the same issue. Would like to downgrade from 17.1 to 16 in order to get SIM and LTE functionality back on my SM-T719.
I tried to modify the meta-inf-installer script, but then I get a zip error.
I suppose because the tab is now recognized as One Plus 2?
Please advise
 

Concept48

Senior Member
Dec 26, 2021
212
99
Sony Xperia M
android-nowe-logo-1.png


LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device. All the source code for LineageOS is available in the LineageOS Github repo. If you would like to contribute to LineageOS, please visit our Gerrit Code Review.

Code:
* [B][U]Your warranty is now void.[/U][/B]
I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, I will laugh at you.


FREQUENTLY ASKED QUESTIONS

(Please read them BEFORE posting anything in the thread!)
Q: The room is bootlooping the first time I attempt to boot into it after clean flashing. What should I do?[/COLOR]
A: Force reboot using the Power and Volume Down buttons. The rom will boot properly the second time around. This is a known bug and it affects clean flashes only.

Q: Whenever I try flashing any lineage-17.1 build, I get the following error in TWRP: Updater process ended with ERROR: 7
A: This error appears whenever you try to flash an Q-based rom within a version of TWRP older than 3.4. Simply flash the linked below version 3.4 or higher, reboot back into recovery, and flash the rom zip again.

Q: Will any of the variants ever receive official builds from LineageOS?
A: No.

Q: How often will new builds be released?
A: At least once per month: as soon as possible after each new Android security patch level is merged and whenever a new feature is added or a bug is fixed.


ROMs
pitrus-
- SM-T713: gts28vewifi

- SM-T719: gts28velte

- SM-T813: gts210vewifi

- SM-T819: gts210velte

Open GApps

Magisk




If your currently installed ROM is any version of either: stock Samsung TouchWiz, LineageOS, CyanogenMod, or any other custom ROM, you must perform a clean install of that LineageOS 17.1 variant, which corresponds to the model of your tablet!


How to flash LineageOS and Open GApps
FULL WIPE (with external microsd card)
1. Move any files you want to keep to your External MicroSD Card – ! Or you will lose them !
2. Download your LineageOS Rom and GApps Package,
3. Move your LineageOS Rom and GApps Package to the external MicroSD storage,
4. Boot into Recovery Mode,
5. Wipe > Advanced Wipe > Select On (enable tick) for Dalvik / Art Cache, System, Data, Internal Storage, Cache,
6. Swipe to Wipe at Bottom of Screen,
7. Back to Main start screen,
8. Wipe > Format Data,
9. Type 'Yes' and press blue checkmark at the bottom-right corner,
10. Go Back to Main Start Screen to Install Rom and GApps,
11. After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe,
12. Reboot System! Enjoy!


FULL WIPE (without external microsd card with NO Home PC access)
1. Move any files you want to keep to a safe folder - ! Or you will lose them !
2. Download your LineageOS Rom and GApps Package,
3. Move your LineageOS Rom and GApps Package to the internal storage,
4. Boot into Recovery Mode,
5. Wipe > Advanced Wipe > Select On (enable tick) for Dalvik / Art Cache, System, Data, Cache,
6. Swipe to Wipe at Bottom of Screen,
7. Back to Main start screen,
8. Wipe > Format Data,
9. Type 'Yes' and press blue checkmark at the bottom-right corner
10. Go Back to Main Start Screen to Install Rom and GApps,
11. After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe,
12. Reboot System! Enjoy!


FULL WIPE (without external microsd card with Home PC access)
1. Move any files you want to keep to your Home PC - ! Or you will lose them !
2. Download your LineageOS Rom and GApps Package,
3. Move your LineageOS Rom and GApps Package to the internal storage,
4. Boot into Recovery Mode,
5. Wipe > Advanced Wipe > Select On (enable tick) for Dalvik / Art Cache, System, Data, Cache,
6. Swipe to Wipe at Bottom of Screen,
7. Back to Main start screen,
8. Wipe > Format Data,
9. Type 'Yes' and press blue checkmark at the bottom-right corner,
10. Go Back to Main Start Screen to Install Rom and GApps,
11. After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe,
12. Reboot System! Enjoy!
13. Once first boot is completed you can safely move your files back onto your Internal Storage.


Typically if you do not do a Clean Install then you are not allowed to report errors or problems. If you Dirty Install and you do have problems then you will be asked to Wipe All and Clean Install and see if the problems still exist. This is a DAILY changing rom and any bug that you found was not working on the previous day's build may be fixed with todays daily build. On a side note, the code implemented to fix that bug could potentially break something that worked on that previous build. So reporting problems on a day old build that you dirty flashed over whichever build of whichever rom you had flashed previously will not be accepted as a true error.


Problems known to happen after a Dirty Installation
1. A muddled up mess of a system. You are taking a rom and installing a newer rom with changes over the top of your old rom. Between these two periods of time during which you used your tablet and created data, changed system options, and used apps. This is absolutely increasing the risk of causing problems somewhere in the system/data partitions. Some people have luck with Dirty Flashing. However, it's always hit-and-miss because of what we mentioned above about bug fixes breaking previously working functions. Dirty flashing doesn't only create problems if the source code of the system data and the system settings of the new build are significantly different from those of your previous build. That's not to say that Clean Installing won't ever create problems, but only bugs present on a Cleanly Installed rom are relevant for development purposes.

* Clean Install: Fully wiping everything and installing the rom onto a fully clean system/data partition of the tablet.

* Dirty Install: Installing the rom and GApps over top of the older rom to save time and not have to reinstall all the user apps and tweaking system and app settings that usually take a lot of time to set up as you like.


Bugs
- The rom bootloops only after clean flashing. Force rebooting allows it to boot properly the second time and every time afterwards. See the FAQ's above.
- The cameras work, but with a delayed response, so they are impractical to use.
- T719 & T819: RIL does not work at all.
- You tell us!

Changelog
All major features and bug fixes are discussed in detail by the developer in the thread, whenever they are implemented. All builds include the latest upstream Changes for all devices from LineageOS.

Credits
- Luk1337 and every other open source developer and tester who contributes directly or indirectly to the LineageOS community in the development of and in providing feedback for the gts28velte, gts28vewifi, gts210velte, and gts210vewifi.

Sources
- LineageOS
- team-infusion-developers

XDA:DevDB Information
LineageOS 17.1, ROM for the Samsung Galaxy Tab S2

Contributors
pitrus-
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x

Version Information
Status:
Stable
Current Stable Version: 10
Stable Release Date: 2020-03-25

Created 2020-03-21
Last Updated 2021-11-10
Amazing , I just got this device today in a virgin Maria state , I will upgrade it to this build , just saw the May Build , great site !!! Will make a review for my channel later this day , keep up the good work ,..!
 

wowi63

Senior Member
Jul 8, 2017
52
6
Wileyfox Swift
Xiaomi Poco F1
Does nog really belong in this thread, but I understood there will be no more MicroG LineageOS builds for LineageOS <=16 as they upgraded their docker image. I don't even see any LineageOS 17.1 builds for any device on https://download.lineage.microg.org/
I asked at the Lineage for MicroG-Thread too and got this answer:
https://forum.xda-developers.com/t/lineageos-for-microg.3700997/post-86936521

kurtn: "The microG fork is still built for many fallen out of official devices. It's just with all that 19.1 trouble the 16.0 devices haven't been built for a while. But I guess we will see new builds soon.
I doubt microG fork will follow the unofficial upgrade to 17.1 - better ask the 17.1 dev to include signature spoofing. Or patch it with nanodroid.
The legacy builds come from official lineageOS sources. Those sources still get security patches. Even for 16.0"
 

martinknl

Member
Mar 22, 2016
31
11
Amsterdam
I asked at the Lineage for MicroG-Thread too and got this answer:
https://forum.xda-developers.com/t/lineageos-for-microg.3700997/post-86936521

kurtn: "The microG fork is still built for many fallen out of official devices. It's just with all that 19.1 trouble the 16.0 devices haven't been built for a while. But I guess we will see new builds soon.
Soon is quite optimistic. I asked the microg maintainers and got this answer:
Right now we're lacking time and resources to support other versions (than those officially supported by lineageos).
See github lineageos4microg
 

Concept48

Senior Member
Dec 26, 2021
212
99
Sony Xperia M
To be more clear: gts28velte does not boot, it remains stuck at the bootanimation stage for at least 15 minutes. No gapps, no magisk, only the ROM.

---------- Post added at 10:51 AM ---------- Previous post was at 10:46 AM ----------

Full wipe of course.

Inviato dal mio SM-T719 utilizzando Tapatalk


You know why it does not boot ? Because you don't read , OP wrote , after install rom will have bootloop at boot , hard turn it off and reboot again ..
Rom boots good on T713 only camera does not work .Mabe open camera can help , i made a install review for this rom , will release it in some minutes..

 
Last edited:

MrHaroldA

Senior Member
Aug 26, 2011
94
33
Brabant!
I have installed this ROM successfully, but the first few applications and games I have tried crash my T813 pretty often. I have even seen some spontaneous reboots ... but some apps and games run just fine.

How is the stability for you guys? Is there something I can check, or fix? Or should I try another ROM instead?
 
Last edited:

Fif_

Senior Member
Jun 5, 2013
1,216
1,347
Google Nexus 10
Google Nexus 4
I have installed this ROM successfully, but the first few applications and games I have tried crash my T813 pretty often. I have even seen some spontaneous reboots ... but some apps and games run just fine.

How is the stability for you guys? Is there something I can check, or fix? Or should I try another ROM instead?
Android 9 is more stable than 10 on T813.
But I still get a reboot every once in a while.
 
  • Like
Reactions: MrHaroldA

MorenoCR

New member
Jun 12, 2022
3
0
So this is my first time using a custom rom so I wanna ask how to update to the latest version without wiping my files
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    I have installed this ROM successfully, but the first few applications and games I have tried crash my T813 pretty often. I have even seen some spontaneous reboots ... but some apps and games run just fine.

    How is the stability for you guys? Is there something I can check, or fix? Or should I try another ROM instead?
    Android 9 is more stable than 10 on T813.
    But I still get a reboot every once in a while.
    1
    Is there a way to backup tweaks I made for the phone. Examples are custom icon, settings,
    That is not possible for this ROM, i think. It needs a clean install! However, if you know where these specific files are stored, maybe you can make a backup. And then put them back?
  • 68
    android-nowe-logo-1.png


    LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device. All the source code for LineageOS is available in the LineageOS Github repo. If you would like to contribute to LineageOS, please visit our Gerrit Code Review.

    Code:
    * [B][U]Your warranty is now void.[/U][/B]
    I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or your getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at us for messing up your device, I will laugh at you.


    FREQUENTLY ASKED QUESTIONS

    (Please read them BEFORE posting anything in the thread!)
    Q: The room is bootlooping the first time I attempt to boot into it after clean flashing. What should I do?[/COLOR]
    A: Force reboot using the Power and Volume Down buttons. The rom will boot properly the second time around. This is a known bug and it affects clean flashes only.

    Q: Whenever I try flashing any lineage-17.1 build, I get the following error in TWRP: Updater process ended with ERROR: 7
    A: This error appears whenever you try to flash an Q-based rom within a version of TWRP older than 3.4. Simply flash the linked below version 3.4 or higher, reboot back into recovery, and flash the rom zip again.

    Q: Will any of the variants ever receive official builds from LineageOS?
    A: No.

    Q: How often will new builds be released?
    A: At least once per month: as soon as possible after each new Android security patch level is merged and whenever a new feature is added or a bug is fixed.


    ROMs
    pitrus-
    - SM-T713: gts28vewifi

    - SM-T719: gts28velte

    - SM-T813: gts210vewifi

    - SM-T819: gts210velte

    Open GApps

    Magisk




    If your currently installed ROM is any version of either: stock Samsung TouchWiz, LineageOS, CyanogenMod, or any other custom ROM, you must perform a clean install of that LineageOS 17.1 variant, which corresponds to the model of your tablet!


    How to flash LineageOS and Open GApps
    FULL WIPE (with external microsd card)
    1. Move any files you want to keep to your External MicroSD Card – ! Or you will lose them !
    2. Download your LineageOS Rom and GApps Package,
    3. Move your LineageOS Rom and GApps Package to the external MicroSD storage,
    4. Boot into Recovery Mode,
    5. Wipe > Advanced Wipe > Select On (enable tick) for Dalvik / Art Cache, System, Data, Internal Storage, Cache,
    6. Swipe to Wipe at Bottom of Screen,
    7. Back to Main start screen,
    8. Wipe > Format Data,
    9. Type 'Yes' and press blue checkmark at the bottom-right corner,
    10. Go Back to Main Start Screen to Install Rom and GApps,
    11. After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe,
    12. Reboot System! Enjoy!


    FULL WIPE (without external microsd card with NO Home PC access)
    1. Move any files you want to keep to a safe folder - ! Or you will lose them !
    2. Download your LineageOS Rom and GApps Package,
    3. Move your LineageOS Rom and GApps Package to the internal storage,
    4. Boot into Recovery Mode,
    5. Wipe > Advanced Wipe > Select On (enable tick) for Dalvik / Art Cache, System, Data, Cache,
    6. Swipe to Wipe at Bottom of Screen,
    7. Back to Main start screen,
    8. Wipe > Format Data,
    9. Type 'Yes' and press blue checkmark at the bottom-right corner
    10. Go Back to Main Start Screen to Install Rom and GApps,
    11. After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe,
    12. Reboot System! Enjoy!


    FULL WIPE (without external microsd card with Home PC access)
    1. Move any files you want to keep to your Home PC - ! Or you will lose them !
    2. Download your LineageOS Rom and GApps Package,
    3. Move your LineageOS Rom and GApps Package to the internal storage,
    4. Boot into Recovery Mode,
    5. Wipe > Advanced Wipe > Select On (enable tick) for Dalvik / Art Cache, System, Data, Cache,
    6. Swipe to Wipe at Bottom of Screen,
    7. Back to Main start screen,
    8. Wipe > Format Data,
    9. Type 'Yes' and press blue checkmark at the bottom-right corner,
    10. Go Back to Main Start Screen to Install Rom and GApps,
    11. After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe,
    12. Reboot System! Enjoy!
    13. Once first boot is completed you can safely move your files back onto your Internal Storage.


    Typically if you do not do a Clean Install then you are not allowed to report errors or problems. If you Dirty Install and you do have problems then you will be asked to Wipe All and Clean Install and see if the problems still exist. This is a DAILY changing rom and any bug that you found was not working on the previous day's build may be fixed with todays daily build. On a side note, the code implemented to fix that bug could potentially break something that worked on that previous build. So reporting problems on a day old build that you dirty flashed over whichever build of whichever rom you had flashed previously will not be accepted as a true error.


    Problems known to happen after a Dirty Installation
    1. A muddled up mess of a system. You are taking a rom and installing a newer rom with changes over the top of your old rom. Between these two periods of time during which you used your tablet and created data, changed system options, and used apps. This is absolutely increasing the risk of causing problems somewhere in the system/data partitions. Some people have luck with Dirty Flashing. However, it's always hit-and-miss because of what we mentioned above about bug fixes breaking previously working functions. Dirty flashing doesn't only create problems if the source code of the system data and the system settings of the new build are significantly different from those of your previous build. That's not to say that Clean Installing won't ever create problems, but only bugs present on a Cleanly Installed rom are relevant for development purposes.

    * Clean Install: Fully wiping everything and installing the rom onto a fully clean system/data partition of the tablet.

    * Dirty Install: Installing the rom and GApps over top of the older rom to save time and not have to reinstall all the user apps and tweaking system and app settings that usually take a lot of time to set up as you like.


    Bugs
    - The rom bootloops only after clean flashing. Force rebooting allows it to boot properly the second time and every time afterwards. See the FAQ's above.
    - The cameras work, but with a delayed response, so they are impractical to use.
    - T719 & T819: RIL does not work at all.
    - You tell us!

    Changelog
    All major features and bug fixes are discussed in detail by the developer in the thread, whenever they are implemented. All builds include the latest upstream Changes for all devices from LineageOS.

    Credits
    - Luk1337 and every other open source developer and tester who contributes directly or indirectly to the LineageOS community in the development of and in providing feedback for the gts28velte, gts28vewifi, gts210velte, and gts210vewifi.

    Sources
    - LineageOS
    - team-infusion-developers

    XDA:DevDB Information
    LineageOS 17.1, ROM for the Samsung Galaxy Tab S2

    Contributors
    pitrus-
    ROM OS Version: Android 10
    ROM Kernel: Linux 3.10.x

    Version Information
    Status:
    Stable
    Current Stable Version: 10
    Stable Release Date: 2020-03-25

    Created 2020-03-21
    Last Updated 2021-11-10
    27
    Reserved

    TWRP 3.5.2_9-2

    The official TWRP for all four variants is built by TeamWin's servers from the outdated android-6.0 branch. A major bug in this branch is that mtp is broken, so I ran my own builds from the android-7.1 branch. I fixed hw encryption, which is why I bumped the version number up to "-2":

    twrp-3.5.2_9-2-gts210velte

    twrp-3.5.2_9-2-gts210vewifi

    twrp-3.5.2_9-2-gts28velte

    twrp-3.5.2_9-2-gts28vewifi
    17
    Since all ROMs got deleted and it looks like there won't be any new ones I decided to do something about this.
    My T719 is still in perfectly good shape and it would be a shame to dump it to the landfill.
    So I spend the last two days digging through Repositories and recreated the build processes originating from ripee's original post, giving these devices a second life.

    Download from my GDrive.
    13
    Changelog

    Builds 0323 for all variants
    * Fingerprint sensor is fixed.
    * Synced with LineageOS sources.

    The builds are running one by one and all should be up within 3-4 hours.
    13
    will the this rom be recieving monthyl google secuirty patches/updates?

    Yes, I'm almost done reviewing my commits so far. Real life is busy lately.