• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][UNOFFICIAL][11.0][ I9300 ][ LineageOS 18.1 ][BETA][TREBLELIZED]

Search This thread
Mar 20, 2021
47
34
Samsung Galaxy S III I9300
Yesterday, after the last update, the recording from the microphone began to work perfectly! Thank you! In the Camera application, it is still impossible to go to the settings - the program stops. It's not critical, I just wanted to know - does everyone have such a bug?
I have been facing that bug since Android 9 but it isn't very important to me as I rarely open the Camera app.
 

Aleks_Mor

Member
Jan 13, 2022
7
2
Youtube Vanced not work too hic hic......
To verify it just installed Vanced Manager with root privileges and then Vanced and Vanced microG. Everything works for me. See screenshots. I am in Russia so the application is in Russian, but the main thing is in English so it will be clear. I'm using last firmware from Jan 13, 2022 | 04:29PM
 

Attachments

  • Screenshot_20220115-103422_Trebuchet.png
    Screenshot_20220115-103422_Trebuchet.png
    91.2 KB · Views: 18
  • Screenshot_20220115-103501_Trebuchet.png
    Screenshot_20220115-103501_Trebuchet.png
    429.2 KB · Views: 18
  • Screenshot_20220115-103546_Trebuchet.png
    Screenshot_20220115-103546_Trebuchet.png
    134.6 KB · Views: 19
  • Like
Reactions: vuut and html6405

html6405

Recognized Developer
Yesterday, after the last update, the recording from the microphone began to work perfectly! Thank you! In the Camera application, it is still impossible to go to the settings - the program stops. It's not critical, I just wanted to know - does everyone have such a bug?
Thx, I will check this and maybe replace the camera app, did this already on the LineageOS 19 build.
Youtube Vanced not work too hic hic......
What do you mean with hic hic? Bad or slow decoding?
 

html6405

Recognized Developer

Aleks_Mor

Member
Jan 13, 2022
7
2
Youtube Vanced not work too hic hic......
As I wrote above, I tested youtube Vanced and everything worked. But then I noticed one thing. Before that, I made a video recording of the screen into a file and the created file (mp4) played normally in the Gallery app and ES Explorer. But after installing Vanced Manager, Vanced and microG, this file stopped playing and the Camera app stopped shooting video. At the same time, Vanced worked fine. I uninstalled Vanced, microG and Vanced manager, rebooted the phone and the mp4 file again began to play normally and the Camera app normally shoot video. I don't know, maybe after installing Vanced I also needed to restart my phone? Or maybe it's some conflict between microG and Google services? I don't know, but maybe someone will find this information useful.
 
Mar 20, 2021
47
34
Samsung Galaxy S III I9300
Hello @html6405, I've been trying to install Viper4Android, and everything I do just won't work, I always get a popup to install the drivers everytime I open the app. Any fix for this?

I used an Android 9 ROM, and V4A worked with Audio Mod Lib and Audio Compatibility Patch.
Tried the same method, didn't work.
 

vuut

Senior Member
Jun 8, 2012
1,467
201
NHA TRANG city
As I wrote above, I tested youtube Vanced and everything worked. But then I noticed one thing. Before that, I made a video recording of the screen into a file and the created file (mp4) played normally in the Gallery app and ES Explorer. But after installing Vanced Manager, Vanced and microG, this file stopped playing and the Camera app stopped shooting video. At the same time, Vanced worked fine. I uninstalled Vanced, microG and Vanced manager, rebooted the phone and the mp4 file again began to play normally and the Camera app normally shoot video. I don't know, maybe after installing Vanced I also needed to restart my phone? Or maybe it's some conflict between microG and Google services? I don't know, but maybe someone will find this information useful.
I flashing rom without Gaaps and root
 

html6405

Recognized Developer
Hello @html6405, I've been trying to install Viper4Android, and everything I do just won't work, I always get a popup to install the drivers everytime I open the app. Any fix for this?

I used an Android 9 ROM, and V4A worked with Audio Mod Lib and Audio Compatibility Patch.
Tried the same method, didn't work.
I'm sorry, I don't know, can't test this by my own soonest next week, maybe a log could help.
I don't know it work well with LOS_ROM year 2021
With which version?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 5
    Update 05.01.2022:
    • Fixed shutdown / reboot behaviour with installed magisk
    • Set swappiness to 60
    • Built nfc extras
    • Enabled software navbar and full gesture navigation as default (to disable you still can use my toggle_navbar script)
    4
    The conclusion of all this:

    SIM unlock worked with this fix, so we should be fine to use a SIM card with and without a PIN code set.

    But giogola faced another issue, he tried to activate the PIN on his SIM in the Galaxy S3 and then directly the PUK was questioned.

    So this may be still an existing bug which needs some debugging, but if you don't try to activate the PIN in the S3, you should be fine :).

    Thanks for testing @giogola!
    3
    Another tester tried to enable the SIM-Pin with the S3 and had also no problems, unlock did work,
    so I think the most dangerous part is gone :).
    2
    Wooot... I was reading about your Android 12 ROM, but Gapps was killing that on my old I9300. However this V11 ROM enabled me to get Soundcloud working again.
    Thanks to you music in the workshop again.

    I9300.jpg
    2
    Problem found. Interference from electronic device(s) in my office. Everything now works fine in a cleaner environment with less electromagnetic interference

    That app helped to spot the EM noise btw, when plotting the compass sensor readings on the graph chart. Another usefull feature :)
  • 33
    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    *
    */

    Hi,

    here you can find my version of LineageOS 18.1 for our Samsung Galaxy S3 (I9300).
    At first I want to thank @rINanDO, @ChronoMonochrome for all your work.
    This Rom is based on https://forum.xda-developers.com/t/rom-unofficial-11-0-0-lineageos-18-0-alpha-20-10-2020.4179303/ .

    This is a early beta build, so don't install it if you want a stable rom and don't report my already listed bugs!

    Here you can see how far everything is working for now.

    • Boot
    • Audio
    • Bluetooth
    • Graphics
    • Cameras
    • Sensors
    • Wifi
    • GPS
    • USB
    • Video playback (HW/SW)
    • Tethering via USB
    • RIL
    • OTA-Updates
    • GSI flash
    • NFC
    • Tethering via WIFI and Bluetooth
    • much more...
    • BT headset call
    • Screen Cast, Chromecast did work, Samsung TV not
    • Random reboots
    • SD-Card can't be formatted as a storage expansion, your device will crash
    • Maybe more
    You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /vendor/etc/gps.conf.
    Or you try GPS Server Optimizer app for a faster 3D fix.
    For both methods you need root rights.
    If you are going to use Gapps,
    here you can download them:
    Open Gapps
    For the others, you can use microG in future.

    Do you like my work?
    Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
    I'm doing this in my free time and it also costs a lot of money to buy hardware.

    donate

    XDA:DevDB Information
    [ROM][11.x][I9300][BETA] LineageOS 18.1, ROM for the Samsung Galaxy S3

    Contributors

    html6405
    Source Code: https://github.com/html6405

    ROM OS Version: 11.x R
    ROM Kernel: Linux 3.x
    ROM Firmware Required: TWRP 3.5.2
    Based On: LineageOS
    Selinux: permissive, this only makes sense as soon the ROM is stable.

    Version Information
    Status:
    Beta

    Created 2021-07-05
    Last Updated 2022-01-13
    8
    hi

    Are you trying to build Android 12?
    Chrono contacted me, his S3 is broken, so I will publish an Android 12 build in January :).
    8
    Update 10.12.2021:
    • Fixed tethering
    • Fixed wifi mac adress in settings
    • Some tweaks
    • Fixed NetGuard support in Kernel
    • Disabled WPA3 in RRO overlay
    • Introduced new possibility to enable / disable the software navbar, this is needed to use Android 10 / 11 touchscreen gestures.
      To enable / disable it do the following:
      adb shell
      su
      setprop toggle_navbar true (also for disabling)
      (You can also use a terminal emulator)
    • Enabled default gesture navigation (you can use my toggle_navbar script to modify it)
    • Enabled 1704 MHz if you wan't to overclock (I will leave 1600 MHz as common)
    • Enabled dex preopt
    • Partly fixed USB mode selection, just reconnect the device to make it active or wait long enough
    • Synced with latest LineageOS sources
    7
    Update 06.07.2021:
    • Changed menu button behavior to better support AOSP
    • WIFI and RIL fixes for AOSP
    Now you can flash your first GSI on your Samsung Galaxy SIII.

    This update will be available via AFH and OTA.
    7
    Update 24.07.2021:
    Via OTA and AFH.