[ROM][UNOFFICIAL][11][GO] Lineage OS 18.1

Search This thread

Pravaig

New member
Sep 28, 2021
4
0
Samsung Galaxy S8
I'm trying to update it from android 5.5.2, unable to access TWRP in recovery, boot flashed TWRP, then flashed migration, and then the ROM, still stuck on the lineage boot logo for the last 38 mins, ik I'm jumping too high, any ideas to ease my jump. Ill update if it gets over the boot logo.
 
D

Deleted member 11477889

Guest
Good Day, May I ask what's the latest build is? Is it "lineage-18.1-20210905-UNOFFICIAL-a6000-signed.zip"? Thank you!
 

kaitou1412

Member
Nov 15, 2009
9
0
Hi, thank you for great works! I installed the latest build, from previously lollypop stock a6000 plus

  1. Flash latest recovery (if needed), based on TWRP >= 3.2
  2. Reboot to recovery
  3. Wipe /cache and /data. If your /data is formatted in f2fs, format it in ext4, otherwise OS will not boot.
  4. Flash the rom
  5. Flash Gapps (Gapps for Android Go or OpenGapps ARM/Android 11/pico or nano)
  6. Flash Magisk (also if needed)
  7. Reboot to ROM
In Installation steps, i include flashing hex patch after number 3, I don't know if it actually is necessary (?)

And i have proble with sim card in this os, because it read as no signal,
switching on and off airplane mode, sometimes can make mobile data works, but in phone, it still read my simcard as no signal. I've tried my simcard in other phone, it actually works, what can I do to get the solution?
 

asratxda

Senior Member
Jun 10, 2012
110
10
Mumbai
Tap to wake up works on this rom. Install smart pack kernel manager by sunilpaulmathew ( a variant of kernel adiutor ) from fdroid app and the app will show an option for tap to wake up screen, just enable it. Seems that kernel supports tap to wake up. 👍
 

kaitou1412

Member
Nov 15, 2009
9
0
After trying many times using variety of methods, somehow I managed to overcome the signal Issue, Alhamdulillaah..
Hi, thank you for great works! I installed the latest build, from previously lollypop stock a6000 plus

  1. Flash latest recovery (if needed), based on TWRP >= 3.2
  2. Reboot to recovery
  3. Wipe /cache and /data. If your /data is formatted in f2fs, format it in ext4, otherwise OS will not boot.
  4. Flash the rom
  5. Flash Gapps (Gapps for Android Go or OpenGapps ARM/Android 11/pico or nano)
  6. Flash Magisk (also if needed)
  7. Reboot to ROM
In Installation steps, i include flashing hex patch after number 3, I don't know if it actually is necessary (?)

And i have proble with sim card in this os, because it read as no signal,
switching on and off airplane mode, sometimes can make mobile data works, but in phone, it still read my simcard as no signal. I've tried my simcard in other phone, it actually works, what can I do to get the solution?
 

kaitou1412

Member
Nov 15, 2009
9
0
After some times, I faced the issue of not able to connect to any Wif with/without password.
I had this issue previously, so this is not my first time having this issue.

After searching and trying for solution, Alhamdulillaah I found the culprit and the solution.

The culprit is there is no WifiConfigStore.xml file in /data/misc/wifi/

So the solution I try is to disable wifi, then
import WifiConfigStore.xml file from other phone, and put it in /data/misc/wifi/ then
chown system:system /data/misc/wifi/WifiConfigStore.xml
then reboot

no need to reflash ROM, Alhamdulillaah

more reading: https://github.com/mnalis/android-wifi-upgrade

Hope this helps someone
 

boy_venz21

Senior Member
Jul 5, 2017
52
54
Bogor
great job, face unlock it still work, but there are some bugs including the fast charging and bluetooth feature, even though it's android GO but still this rom is still heavy causing lag.
 
Last edited:

Toxic razer

Member
Aug 28, 2022
5
0
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.


Whats works:
  • Booting
  • Audio
  • Graphics
  • RIL (calls, sms, mobile data)
  • Wi-Fi, Wi-Fi Direct
  • Bluetooth
  • GPS, GLONASS
  • FM Radio
  • Sensors
  • Camera
  • Face Unlock
  • Video recording
  • Screen cast
  • Offline charging
  • SELinux (enforcing)
  • SafetyNet (with hidden Magisk or without root)

Tell me, if something does not work.

FAQ
  • Q: Does this ROM supports double tap to wake? A: No. And will not in future.
  • Q: Cannot add widgets to home screen. Widgets is not supported? A: Widgets is not supported in builtin launcher. Download any third-party home app (like Nova Launcher) and enjoy!
  • Q: Why split screen mode is not available? How to enable? A: Due to Android Go limitations, all forms of multiwindowing is not available on this edition of Android.
  • Q: When my app "foo" asks permission to access to notifications or to run on top of other apps, I see "This feature is disabled"... A: This is limitations of Android Go to save memory.
  • Q: Cannot use my sdcard as primary storage! A: This feature is unstable and excluded from ROM.
  • Q: Flashed this ROM but phone don't booting! A1: Boot to recovery and wipe /data, then reboot. A2: If your /data is formatted to f2fs, format it to ext4 and boot your phone.
  • Q: What is "Gapps for Android Go"? A: This is Gapps set, extracted as-is from Nokia 1 Plus Android 11 Go firmware and packaged for Lenovo A6000. Nothing removed, just fixed some permissions and added Google Camera Go.

Installation
  1. Flash latest recovery (if needed), based on TWRP >= 3.2
  2. Reboot to recovery
  3. Wipe /cache and /data. If your /data is formatted in f2fs, format it in ext4, otherwise OS will not boot.
  4. Flash the rom
  5. Flash Gapps (Gapps for Android Go or OpenGapps ARM/Android 11/pico or nano)
  6. Flash Magisk (also if needed)
  7. Reboot to ROM


Build 05.09:
  • August security patch level
  • ROM is signed with release-keys
  • Build variant now is user, not userdebug
  • Updates from Lineage OS team
  • Clipboard access notification
  • USB fast charging toggler
  • Some OEM Android Go tweaks (from Nokia, ZTE)
  • New default wallpaper
  • Stricten background limits: 2 apps for 1/8 and 4 for 2/16
  • Recents is limited to 4 apps
  • Reworked WiFi and Tethering configuration overlays
  • Added overlays for Gboard, MessagesGo
  • Disabled caching in Trebuchet (launcher is fast enough to allow us to save some amount of memory)
  • zRam switched to Zstandart compression algorithm
  • Implemented clean page protection to reduce lags under memory pressure
  • Disabled rounded corners in UI
  • SEPolicy fixes
  • Misc...

NOTE: Strongly not recommended "dirty" updating. If you want to do this anyway, flash migration script before flashing the ROM!

Migration script: https://drive.google.com/file/d/15hB63RkyRpCljho9jyFTHoYWvCl4cDWe/view?usp=drivesdk

Download ROM:
https://drive.google.com/file/d/1vUHuS18vDowwCSIWl8Dl4xxRHR4EHir0/view?usp=drivesdk

Gapps: Gapps for Android Go(updated!) or OpenGapps (ARM, pico or nano)

Credits to:

Our Telegram discussion group: Lenovo A6000/Plus Community Discussions

Contributors
acroreiser
dev_harsh1998

Source code
Device tree: https://github.com/acroreiser/android_device_lenovo_a6000
Kernel tree: https://github.com/acroreiser/android_kernel_lenovo_a6000
Vendor tree: https://github.com/acroreiser/android_vendor_lenovo_a6000

ROM OS Version: Android 11 Go
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Hex Firmware Patch, TWRP >= 3.2
Based On: LineageOS

Version Information
Status:
Stable

Created 2021-05-12
Last Updated 2021-09-13
bro still using this rom working ultra smooth in my lenovo a6000 Can it be updated to android 12
 

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.


    Whats works:
    • Booting
    • Audio
    • Graphics
    • RIL (calls, sms, mobile data)
    • Wi-Fi, Wi-Fi Direct
    • Bluetooth
    • GPS, GLONASS
    • FM Radio
    • Sensors
    • Camera
    • Face Unlock
    • Video recording
    • Screen cast
    • Offline charging
    • SELinux (enforcing)
    • SafetyNet (with hidden Magisk or without root)

    Tell me, if something does not work.

    FAQ
    • Q: Does this ROM supports double tap to wake? A: No. And will not in future.
    • Q: Cannot add widgets to home screen. Widgets is not supported? A: Widgets is not supported in builtin launcher. Download any third-party home app (like Nova Launcher) and enjoy!
    • Q: Why split screen mode is not available? How to enable? A: Due to Android Go limitations, all forms of multiwindowing is not available on this edition of Android.
    • Q: When my app "foo" asks permission to access to notifications or to run on top of other apps, I see "This feature is disabled"... A: This is limitations of Android Go to save memory.
    • Q: Cannot use my sdcard as primary storage! A: This feature is unstable and excluded from ROM.
    • Q: Flashed this ROM but phone don't booting! A1: Boot to recovery and wipe /data, then reboot. A2: If your /data is formatted to f2fs, format it to ext4 and boot your phone.
    • Q: What is "Gapps for Android Go"? A: This is Gapps set, extracted as-is from Nokia 1 Plus Android 11 Go firmware and packaged for Lenovo A6000. Nothing removed, just fixed some permissions and added Google Camera Go.

    Installation
    1. Flash latest recovery (if needed), based on TWRP >= 3.2
    2. Reboot to recovery
    3. Wipe /cache and /data. If your /data is formatted in f2fs, format it in ext4, otherwise OS will not boot.
    4. Flash the rom
    5. Flash Gapps (Gapps for Android Go or OpenGapps ARM/Android 11/pico or nano)
    6. Flash Magisk (also if needed)
    7. Reboot to ROM


    Build 05.09:
    • August security patch level
    • ROM is signed with release-keys
    • Build variant now is user, not userdebug
    • Updates from Lineage OS team
    • Clipboard access notification
    • USB fast charging toggler
    • Some OEM Android Go tweaks (from Nokia, ZTE)
    • New default wallpaper
    • Stricten background limits: 2 apps for 1/8 and 4 for 2/16
    • Recents is limited to 4 apps
    • Reworked WiFi and Tethering configuration overlays
    • Added overlays for Gboard, MessagesGo
    • Disabled caching in Trebuchet (launcher is fast enough to allow us to save some amount of memory)
    • zRam switched to Zstandart compression algorithm
    • Implemented clean page protection to reduce lags under memory pressure
    • Disabled rounded corners in UI
    • SEPolicy fixes
    • Misc...

    NOTE: Strongly not recommended "dirty" updating. If you want to do this anyway, flash migration script before flashing the ROM!

    Migration script: https://drive.google.com/file/d/15hB63RkyRpCljho9jyFTHoYWvCl4cDWe/view?usp=drivesdk

    Download ROM:
    https://drive.google.com/file/d/1vUHuS18vDowwCSIWl8Dl4xxRHR4EHir0/view?usp=drivesdk

    Gapps: Gapps for Android Go(updated!) or OpenGapps (ARM, pico or nano)

    Credits to:

    Our Telegram discussion group: Lenovo A6000/Plus Community Discussions

    Contributors
    acroreiser
    dev_harsh1998

    Source code
    Device tree: https://github.com/acroreiser/android_device_lenovo_a6000
    Kernel tree: https://github.com/acroreiser/android_kernel_lenovo_a6000
    Vendor tree: https://github.com/acroreiser/android_vendor_lenovo_a6000

    ROM OS Version: Android 11 Go
    ROM Kernel: Linux 3.10.x
    ROM Firmware Required: Hex Firmware Patch, TWRP >= 3.2
    Based On: LineageOS

    Version Information
    Status:
    Stable

    Created 2021-05-12
    Last Updated 2021-09-13
    2
    New build is up!

    Changes:

    • June security patch level
    • Updates from Lineage OS team
    • Memory and performance optimizations for 1/8 devices
    • Forward-ported qcom memory optimizations (frameworks/base)
    • Updated Binder driver (kernel)
    • Implemented automatic background apps memory reclaim (kernel)
    • Restored Qualcomm VP8 and HEVC codecs
    • Updated Bluetooth HAL from Nokia 1.3
    • Updated some media blobs
    • Some kernel tweaks from other low ram devices (Redmi Go, Nokia 1.3)
    • Workaround for broken video recording in recent versions of Google Camera Go
    • Recent apps screen is limited to 5 apps to save memory
    • Killed multiuser support - Go devices should not have this. Also this feature is pointless in our ancient phones...

    Download: https://drive.google.com/file/d/1IqRTbY9CYH9Je3bmqaavjQHnn-763bx5/view?usp=drivesdk
    1
    First of all thanks to all the Devs who have kept this device still alive by providing it with those up to date roms...

    Well I am using this rom for last 3 days i must say its super smooth apps are opening blazing fast, all major functions are working properly and it can be used as a daily driver for sure...

    Now I encounter one bug so far its in Camera Go app the thing is when i change the storage location to SD card and start video recording than it suddenly freezes after some seconds by saying "Something went wrong " than i need to restart the app for using it again, by the way when i change the storage location back to internal than video recording is working fine so its really not bothering me that much....

    There is one more thing well its not a bug its just my observation with this rom that during charging its heat up more than expected even when its charging at 90% to 100% slot which i never experience with any other roms.

    All in all still its worth a shot everything's working fine, thanks to the devs again...
    1
    The problem is in the application itself. in the firmware the application is of the old version and there should be no problems with the video. But it is automatically updated to the latest version in the Playmarket and there is a problem. Remove the app update and it will work as expected.
    1
    Hey devs,

    Thanks for this brand new ROM! I use this phone as a daily driver and wanted your advice on this version or the 17.1 version. Which one is likely to be maintained in the future? I understand that 17.1 is stable but will it still get more updates or security patches or should I go ahead with this 18.1 version, please?

    Thank you for your help and also for keeping this phone alive in 2021.

    Cheers,
    S