[ROM][UNOFFICIAL][12.1.0][r7][I9100] LineageOS 19.1 [ALPHA]

Search This thread

ze7zez

Senior Member
Another interesting observation - no clue whether already the case with previous LOS versions: While being in flight mode but WiFi on, I noticed 213 % battery usage by mobile network. 213 % sounds just a little bit too much under these circumstances ... (...)
Could it be that the wraiths have returned? 👻

Compare with posts #118 and #124 in the LineageOS 17.1 thread.

Are you using gapps and/or have you restored the ROM in TWRP?
 

maverikdj

Senior Member
May 19, 2009
55
9
Naples

Attachments

  • Immagine 2022-07-04 220951.png
    Immagine 2022-07-04 220951.png
    80.7 KB · Views: 73

ze7zez

Senior Member
(...) after flashing stuck in download mod. (...)
Maybe you have a damaged NAND fragment. Try in small steps. In odin, turn off auto-reboot, put only PIT and some early TWRP.tar. After successful flashing, remove the battery for 30 seconds, reinsert and start TWRP and upload the latest TWRP.img. If that's okay then installing LOS_19.1.zip in TWRP will let you see the recovery.log.
 

js-xda

Senior Member
Aug 20, 2018
305
129
Maybe you have a damaged NAND fragment. Try in small steps. In odin, turn off auto-reboot, put only PIT and some early TWRP.tar. After successful flashing, remove the battery for 30 seconds, reinsert and start TWRP and upload the latest TWRP.img. If that's okay then installing LOS_19.1.zip in TWRP will let you see the recovery.log.
@maverikdj: Building on this, make sure to format the newly created partitions from TWRP as listed in my post here a few days ago. An earlier TWRP (3.3.1) can be found e. g. in the LOS 18.1 thread - second post.
 

maverikdj

Senior Member
May 19, 2009
55
9
Naples
Finally Done. Steps:
1. Flash PIT i9100-LOS-19.1.pit
2. Flash via odin File tar i9100-LOS-19.1_android-12.1.0_r2.tar
3. Phone go only download mode or recovery.
4. Put lineage-19.1-20220613-UNOFFICIAL-i9100.zip in microsd
5. Reboot in recovery TWRP and flash file from sd.
6. Reboot in recovery TWRP and full wipe
7. Reboot system and it's all ok.
8. Now flash gapps

Thanks a lot for all support
 

js-xda

Senior Member
Aug 20, 2018
305
129
Аз бях сложил един от този форум но телефона стана много бавен.
DeepL says: "I had put one on this forum but the phone became very slow."

Well, question would be to what you are comparing. Compared to the last stock ROM (Android 4.1?), it is likely slower and it depends also on whether you use GApps or not. But compared to LineageOS 17.1 and 18.1, the LineageOS 19.1 ROM is not much different and better on battery drain (if not used actively).

Another interesting observation - no clue whether already the case with previous LOS versions: While being in flight mode but WiFi on, I noticed 213 % battery usage by mobile network. 213 % sounds just a little bit too much under these circumstances ... But as I wasn't 100 % sure that I had the phone from the start in flight mode, I did another test (charging to 100 %) which resulted still in battery usage caused by mobile network. I started to wonder whether WiFi is categorized as mobile network and did a last test with WiFi off and still (only) mobile network battery usage was indicated.

Is this "by design correct" - e. g. linked to old kernel not supporting this reporting function properly - or is the mobile network not completely off in flight mode due to some bug?

No disaster for me but I was surprised after all.

Adding a longer duration example with no WiFi or mobile data active (100 % sure). I am extremely happy about the standby battery consumption but 571 % is again a bit odd. ;-)

Screenshot_20220708-091747_Einstellungen.png
 

linuxnubee

Senior Member
Apr 19, 2012
182
41
Does the ROM support F2FS partitions or do we need to stick to ext4 after the re-pit and then re-partition phase, also if the ROM does not support this any chance of you modifying it to work with this as it would also massively reduce any lag issues for eg my old nexus7 was stuck on android 5.0 stock unable to even load its chrome or watch a video stored on it without major lag after re-partitioning to F2FS using TWRP and installing android 7.1 performance increased 200%.

Also massive thank you for keeping my (and many others) ancient devices alive hugely appreciate your work done here
 
  • Like
Reactions: Nikkerston
it runs so mutch better than i expected without Gapps and im probably never gonna install them. the rom works great (for the about an hour i have been using it) and the hitches dont mean anything to me on sutch an old device. Great work porting this rom and making it work this well

i could daily drive this phone since 3G is not going down any time soon here.
 

fargh123

Senior Member
Jan 31, 2014
92
76
Hi i cant install gapps
i use twrp 3.6
any idea
 

Attachments

  • IMG_20220729_205421_edit_53120269909602~2.jpg
    IMG_20220729_205421_edit_53120269909602~2.jpg
    2.1 MB · Views: 25

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Hi i cant install gapps
    i use twrp 3.6
    any idea
    rINanDO said that MindTheGApps need the toybox version of TWRP 3.6.1 (on first post).
    Maybe it also apply to BiTGApps
    1
    I have connection issue on lineage
    Wifi always sys no internet
    I installed safety net and zygisk but no luck
    Hello
    My be my short investigation help you:
    For me the issue with WiFi still problematic as well. I raised up the issue some times and repeat it now:
    Issue description:
    1) For default security setting: wpa+psk
    - Wifi connection to Hotspot with default setting under Windows at my notebook work well. Here is log of successful connection:
    https://drive.google.com/file/d/15IQqqaAHaOYIQBS7LAJ9L0XHmWZ5hIdE/view?usp=sharing
    - Wifi connection to Hotspot with default setting under Fedora at my notebook does not work. Here is log of connection attempt:
    https://drive.google.com/file/d/1QTHcjPQX0drKRe-FRMIcPbuI0osHljrH/view?usp=sharing
    - Wifi connection mostly work well with other Hotspots, only few unsuccessful case I can remember.
    2) For non default security setting: none
    - Wifi connection to Hotspot with default setting (exept security) under Fedora at my notebook work well.
    I have not any issues to use Wifi Hotspot from my Fedora (it is my mostly working system) system with other client devices. The problem is not critical for me, but I am interesting to find solution. Please, any help
  • 52
    lineage.jpg

    Code:
    /*
    ** Your warranty is now void.
    **
    ** We are not responsible for bricked devices, dead SD cards,
    ** thermonuclear war, or you getting fired because the alarm app failed. Please
    ** do some research if you have any concerns about features included in this ROM
    ** before flashing it! YOU are choosing to make these modifications, and if
    ** you point the finger at us for messing up your device, we will laugh at you.
    **
    **/

    About LineageOS

    LineageOS is a free and open-source operating system for set-top boxes, smartphones and tablet computers, based on the Android mobile platform. It is the successor to the custom ROM CyanogenMod, from which it was forked in December 2016 when Cyanogen Inc. announced it was discontinuing development and shut down the infrastructure behind the project. Since Cyanogen Inc. retained the rights to the Cyanogen name, the project rebranded its fork as LineageOS.

    LineageOS was officially launched on December 24, 2016, with the source code available on GitHub. Since that time, LineageOS development builds now cover more than 185 phone models with over 1.9 million active installs,having doubled its user base in the month February–March 2017 And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.


    About Galaxy S2 running Android 12 12.1!
    Hi everyone,

    Welcome to my thread for i9100 (from 2011) running Android 12. It took a while, but now the rom is at a usable state (no daily).
    In my country my provider KPN will stop supporting 3G on march 2022 and this wil make my S2 unusable for daily drive. This means I probably won't port this phone to Android 13 in the future.

    Update 16-03-2022
    I renamed the thread because I updated the sources to LOS 19.1/Android 12.1 and everything is still working except of GPS.

    Credits
    * @ChronoMonochrome
    * Shivaay
    * @lee.wp14
    * @ze7zez
    * arco68
    * Team Infusion
    * LineageOS & CO (For Source Code)
    * All the authors the last 10 years working on this legendary phone
    * Last but not least @channel48 which reviews custom ROMS from all kind of phones including my work on this ancient one :)

    I hope I didn't miss someone, please let me know.

    Source code:
    https://www.github.com/lineageos
    https://www.github.com/rinando

    Current state:
    Working:
    - RIL (Phone/SMS)
    - Audio
    - Bluetooth (audio & headset)
    - Wifi
    - IMEI
    - Touchkeys
    - Hardware encode/decoder
    - Display
    - DRM, for e.g. Netflix
    - Selinux enforced
    - BitGapps
    - Magisk v23.0 v24.1
    - FM Radio (using Spirit2)
    - Camera Videorecording
    - Camera Pictures
    - MicroG support
    - (A)GPS fixed! Thanks to @html6405 for helping me out!

    Working-ish/WIP:
    - BLN
    - Camera Pictures, one time only and crashes after second use untill reboot.
    - Sensors, sometimes works

    Not working/known issues:
    - AGPS
    - Camera Videorecording

    - PowerHAL
    - LiveDisplay
    - MicroG support

    Won't fix:
    - HDMI (MHL) (support broken/removed since CM 10)
    - (A)GPS, I can't fix this blob crash :(


    How to FULL clean flash LOS 19.1 and TWRP 3.6.1_9.0
    Warning: This will erase your data-partition completely!
    1. Download i9100-LOS 19.1 via ODIN.zip and unzip it on your Windows PC.
    2. Start the Odin3 v3.07.exe in the ODIN3 v3.07-folder
    3. Choose for PIT: i9100-LOS-19.1.pit
    4. Choose for PDA: i9100-LOS-19.1_android-12.1.0_r2.tar
    5. Make sure the following checkboxes are checked:
      1. Auto Reboot (optional)
      2. Re-Partition
      3. PDA
    6. Click Start!
    7. Reboot your phone and LOS 19.1 will start. First start could take about a few minutes.
    Note about new PIT-file: The recovery image of TWRP 3.6.1 exceeds the 8mb partition size of our PIT. That is why I introduced a new PIT-file. I also enlarged the System-partition (FACTORYFS) to 2GB. These are the partition changes (compared with stock) of PIT-file i9100-LOS-19.1.pit :
    Partition nameStock sizeLOS 19.1 size
    RECOVERY8MB32MB
    CACHE100MB76MB
    FACTORYFS512MB2048MB
    DATAFS2048MB12792MB
    UMS11784MB8MB
    HIDDEN512MB8MB


    How to apply Magisk
    • Copy the Magisked kernel on the SD-card of your phone.
      This is the second download-file in the download section ending with ...magisk_boot.img.
    • Reboot into recovery (TWRP)
    • In TWRP
      • Choose Install
      • Choose Install Image
        Now you can select ...magisk_boot.img
      • Choose Boot
      • And flash it
    • Reboot into Android
    • Download Magisk from https://magiskmanager.com
      • If you download the .zip, rename it to .apk
      • Install the Magisk App in Android and follow its instructions

    Downloads - TWRP 3.6.1
    To install TWRP 3.6.1 you need to enlarge your recovery-partition.
    You can download manually the PIT file here.
    I recommend to use the "full clean flash"-instructions described above which comes with TWRP 3.6.1.

    Download TWRP 3.6.1_9.0 here:
    twrp-3.6.1_9.0-i9100.img

    If you need Toybox instead of Busybox, you can download the toybox-version here:
    twrp-3.6.1_9.0-i9100_toybox.img

    How to flash .img-file:
    In TWRP => Install => Install Image => Choose your img-file => Choose Recovery => Flash

    Downloads - LOS 19.1 Builds


    Build #2 2022-06-13

    Overall state: Stable
    Android build: 12.1.0-r7
    Required recovery: TWRP 3.3.1-1

    Changes:
    - Updated LOS sources
    - Fixed (A)GPS thanks to @html6405 !

    Downloads
    lineage-19.1-20220613-UNOFFICIAL-i9100.zip
    lineage-19.1-20220613-UNOFFICIAL-i9100_magisk_24100_boot.img

    Build #1 2022-03-15
    Overall state: Stable
    Android build: 12.1.0-r1
    Required recovery: TWRP 3.3.1-1

    Changes:
    - Updated LOS sources
    - If you are using Magisk, please use v24.1.
    There are issues with v24.2 and v24.3 which doesn't work properly on our device.

    Downloads
    lineage-19.1-20220315-UNOFFICIAL-i9100.zip
    lineage-19.1-20220315-UNOFFICIAL-i9100_magisk_24100_boot.img

    LOS 19.0 Builds

    Build #3 2022-02-28

    Overall state: Stable
    Android build: 12.0.0-r29
    Required recovery: TWRP 3.3.1-1

    Changes:
    - Updated LOS sources
    - Fixes Bluetooth
    - Disabled (A)GPS, I can't fix this.


    Downloads
    lineage-19.0-20220227-UNOFFICIAL-i9100.zip
    lineage-19.0-20220227-UNOFFICIAL-i9100_magisk_boot.img

    Build #2 2022-01-09
    Overall state: Lets find out!
    Android build: 12.0.0-r18
    Required recovery: TWRP 3.3.1-1

    Changes:
    - Updated LOS sources
    - Fixed Camera picture
    - Fixed Camera videorecording
    - MicroG support (Should work, I didn't test it myself, please test)
    - Disabled some animation for more responsiveness
    - Some optimization for zRAM/IO/LMK and background services

    Downloads
    lineage-19.0-20220109-UNOFFICIAL-i9100.zip
    lineage-19.0-20220109-UNOFFICIAL-i9100_magisk_boot.img

    Build #1 2021-12-28
    Overall state: Lets find out!
    Android build: 12.0.0-r18
    Required recovery: TWRP 3.3.1-1

    Downloads
    lineage-19.0-20211228-UNOFFICIAL-i9100.zip
    lineage-19.0-20211228-UNOFFICIAL-i9100_magisk_boot.img
    19
    New build is up!
    Hi everyone,
    In this build I fixed the camera and some decoding issues when playing video via the Gallery. It was using software coding. I also found the patches updated for Android 12 to support MicroG. I didn't patched it myself nor test it. Please test if this is working. The code looks good. I wanted to fix GPS first but I haven't got a clue why the blob is crashing...
    I also applied some optimizations taken from i9300 LOS 19.0 builds so let see if it actually works and improves on our device.
    Happy testing!


    Build #2 2022-01-09
    Overall state: Lets find out!
    Android build: 12.0.0-r18
    Required recovery: TWRP 3.3.1-1

    Changes:
    - Updated LOS sources
    - Fixed Camera picture
    - Fixed Camera videorecording
    - MicroG support (Should work, I didn't test it myself, please test)
    - Disabled some animation for more responsiveness
    - Some optimization for zRAM/IO/LMK and background services

    Downloads
    lineage-19.0-20220109-UNOFFICIAL-i9100.zip
    lineage-19.0-20220109-UNOFFICIAL-i9100_magisk_boot.img
    17
    New Build is up!
    Special thanks to @html6405 for sharing his fix for GPS. Sources are updated and GPS is fixed!

    Build #2 2022-06-13
    Overall state: Stable
    Android build: 12.1.0-r7
    Required recovery: TWRP 3.3.1-1

    Changes:
    - Updated LOS sources
    - Fixed (A)GPS thanks to @html6405 !

    Downloads
    lineage-19.1-20220613-UNOFFICIAL-i9100.zip
    lineage-19.1-20220613-UNOFFICIAL-i9100_magisk_24100_boot.img
    14
    New build is up!
    I noticed few days ago LOS has updated their repositories to Android 12.1, so I updated the sources and build it ;) Everything seems to be working like in LOS 19.0. I didn't have to make any device specific changes in code so it was an easy port without any effort on my side. All credits to the LOS-team!
    I don't know if there is any GAPPS for Android 12.1 available at this point, probably not yet. In the meanwhile I will create periodically new builds also for LOS 19.0 until LOS stops updating this and continues with LOS 19.1.
    Have fun!

    Build #1 2022-03-15
    Overall state: Stable
    Android build: 12.1.0-r1
    Required recovery: TWRP 3.3.1-1

    Changes:
    - Updated LOS sources
    - If you are using Magisk, please use v24.1.
    There are issues with v24.2 and v24.3 which doesn't work properly on our device.

    Downloads
    lineage-19.1-20220315-UNOFFICIAL-i9100.zip
    lineage-19.1-20220315-UNOFFICIAL-i9100_magisk_24100_boot.img
    13
    Hi guys,

    I was quite busy last months. I was making builds in the background but never reported here due lack of time... I just read html6405's PM and post here. So I will include it in the next build. I already pulled r7 from LOS. Stay tuned! Thanks for helping!