[ROM] [UNOFFICIAL] [12.1] LineageOS 19.1

[fakemanoan]

Hi thanks all for the reports. I'll see if I can work on a fix for the call issues along with official support for W8 models.

I am still working on the project, so dont worry about that, but just expect a small delay between releases while I sort some stuff out.

 

[malim20]

Can I just get confirmation, is no one else's phone overheating on the latest update? If so, I might need to factory reset and re-install it. Because my battery is finishing so fast! I used to be able to watch x265 10-bit with Software decoding, but on the latest version that and just normal apps decimate my battery and the power button gets very, very hot

Also, fakemanoan thank you so much for your great effort!

 

[SonicoXD]

Can I just get confirmation, is no one else's phone overheating on the latest update? If so, I might need to factory reset and re-install it. Because my battery is finishing so fast! I used to be able to watch x265 10-bit with Software decoding, but on the latest version that and just normal apps decimate my battery and the power button gets very, very hot

Also, fakemanoan thank you so much for your great effort!

Perhaps your problem comes from an old battery + the CPU usage being constantly high. On my device the small cores are always performing at their maximum, which after some time generates heat and causes the whole interface to lag a lot

I'm however not experiencing overheating, and I did a clean flash.

 

[reon_todd]

been using los19.1 on my s9 for a while but it has some bugs like keyboard appears for a fraction of seconds and then dissapear on some apps especially on coc
if i switch my phone to battery saver and palying some games wifi will disconnect by itself
third call quality is very bad sorry for my english

 

[Ender of Games]

I'm also wondering if that governor you were talking about was on... I've had huge sections of lag, and I don't know how to deal/stop that. The extreme battery usage isn't 100% of the time, too. It's odd, I might have to find something that monitors that much more closely.

Can I just get confirmation, is no one else's phone overheating on the latest update? If so, I might need to factory reset and re-install it. Because my battery is finishing so fast! I used to be able to watch x265 10-bit with Software decoding, but on the latest version that and just normal apps decimate my battery and the power button gets very, very hot

Also, fakemanoan thank you so much for your great effort!

I've had overheating with this phone before, but on this ROM I've had none. I do use a G920W8, but Sonico also says no overheating.

 

[malim20]

testing on S6 Edge and everything is working normally so far, the lags have decreased a lot after I added 1GB of swap memory, thanks for the time you're spending on the rom

I thought the kernel needs to support swap?

cat /proc/cpuinfo

doesn't show that it does have support. But when I created a swapfile:

dd if=/dev/zero of=swapfile bs=1024 count=524288
mkswap swapfile
swapon swapfile

cat /proc/meminfo
free -h

EDIT.

I don't think it's using it, the zram partition only shows

 

[BOTUS]

great to see a new ROM. Mine is still stock and the other day I got an update

PDA	G920FXXU6EVG1

it seems to have brought emergency calls with no SIM to the party - I get more icons on the screen - does loading an aftermarket ROM play havoc with this update or ?

Download Samsung Galaxy S6 SM-G920F firmware

Download the latest Samsung firmware for Galaxy S6 with model code SM-G920F. Check out our free download or super fast premium options.

www.sammobile.com

 

[alirezapk]

I installed it and everything is fine except phone app is a little buggy .
You cant turn call volume down . everybody around you can hear your calls
and the phone app itself is laggy and slow . im not complaining just letting you know the problems and appreciate the work you done . thanks alot
and i have one question : If you happened to fix these someday can i update trough phone's normal update or have to install the rom from scratch again ? thanks again
and sorry for sloppy english

Edit : uh i forgot another thing : I installed express vpn app and it showed Warning : you device is Rooted ... extra extra
but when i installed root checker it says : Your device is not rooted properly .
I dont know its a bug or not but i thought its worth mentioning .

 

[julior9308]

LineageOS is a free, community built, aftermarket firmware distribution of Android 12 (S), which is designed to increase performance and reliability over stock Android for your device.

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

After a long wait, here is Android 12L for the Samsung Galaxy S6! Though it is a beta with some issues, I figure I release it.

Based on the Exynos7420 source code.

What's working:

• Bluetooth
• Telephony (Calls, SMS, Mobile Data)
• WiFi/Hotspot
• NFC
• GPS
• Camera
• Fingerprint
• HWC

What's not working:

• VoLTE and other proprietary Samsung stuff
• You tell me

Download Link:
LineageOS Releases on my GitHub

Source Code:

GitHub - fakemanoan/local_manifests

Contribute to fakemanoan/local_manifests development by creating an account on GitHub.

github.com

GitHub - fakemanoan/android_kernel_samsung_universal7420

Contribute to fakemanoan/android_kernel_samsung_universal7420 development by creating an account on GitHub.

github.com

ROM OS Version: 12.x S
ROM Kernel: Linux 3.10.x
Based On: LineageOS

Version Information:
Beta/Testing

ROM creation date: 23/08/2022
Last release: 08/10/2022

If you would like to support me , visit my donation page.

Thanks to:
Talu(atgithub) - various patches used
html6405 and rinando - various lineageos patches used
enezusun2002 - original exynos7420 source code, without him and his work, none of this would really be possible
All Exynos7420/universal7420 contributors
Armashonxda - help with fingerprint issue

LineageOS is a free, community built, aftermarket firmware distribution of Android 12 (S), which is designed to increase performance and reliability over stock Android for your device.

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

After a long wait, here is Android 12L for the Samsung Galaxy S6! Though it is a beta with some issues, I figure I release it.

Based on the Exynos7420 source code.

What's working:

• Bluetooth
• Telephony (Calls, SMS, Mobile Data)
• WiFi/Hotspot
• NFC
• GPS
• Camera
• Fingerprint
• HWC

What's not working:

• VoLTE and other proprietary Samsung stuff
• You tell me

Download Link:
LineageOS Releases on my GitHub

Source Code:

GitHub - fakemanoan/local_manifests

Contribute to fakemanoan/local_manifests development by creating an account on GitHub.

github.com

GitHub - fakemanoan/android_kernel_samsung_universal7420

Contribute to fakemanoan/android_kernel_samsung_universal7420 development by creating an account on GitHub.

github.com

ROM OS Version: 12.x S
ROM Kernel: Linux 3.10.x
Based On: LineageOS

Version Information:
Beta/Testing

ROM creation date: 23/08/2022
Last release: 08/10/2022

If you would like to support me , visit my donation page.

Thanks to:
Talu(atgithub) - various patches used
html6405 and rinando - various lineageos patches used
enezusun2002 - original exynos7420 source code, without him and his work, none of this would really be possible
All Exynos7420/universal7420 contributors
Armashonxda - help with fingerprint issues

Wow!!! Great work. You’re great!!!! My device is W8, still waiting . You’re the best

 

[04ThomasX_X]

Dude thats amazing project for R.I.P g92X good job
i'm here for told you some bug hope its help to you to make better legend...
1. VPN! vpn not working. its connect but IP not change.
2. LED notification. i know you say what the hack but LED notification not working when phone charging on power off.
3. Bluetooth headphone connection! yeap its have some noise.
4. fast charging. aaa bro i enable fast charging in setting but i thing its not fast against another roms ((1H)).
5. i cant loging to my any google accont. ((i flash gapps))
its free project. thanks man for make it read my comment only as a friendly.

edit: 1 & 5 fixed when i used HTTP injector.

 

[ArmashOnXDA]

Dude thats amazing project for R.I.P g92X good job
i'm here for told you some bug hope its help to you to make better legend...
1. VPN! vpn not working. its connect but IP not change.
2. LED notification. i know you say what the hack but LED notification not working when phone charging on power off.
3. Bluetooth headphone connection! yeap its have some noise.
4. fast charging. aaa bro i enable fast charging in setting but i thing its not fast against another roms ((1H)).
5. i cant loging to my any google accont. ((i flash gapps))
its free project. thanks man for make it read my comment only as a friendly.

edit: 1 & 5 fixed when i used HTTP injector.

Fast charging should work just fine. It's probably your charging cable that's causing the issue

 

[SonicoXD]

Dude thats amazing project for R.I.P g92X good job
i'm here for told you some bug hope its help to you to make better legend...
1. VPN! vpn not working. its connect but IP not change.
2. LED notification. i know you say what the hack but LED notification not working when phone charging on power off.
3. Bluetooth headphone connection! yeap its have some noise.
4. fast charging. aaa bro i enable fast charging in setting but i thing its not fast against another roms ((1H)).
5. i cant loging to my any google accont. ((i flash gapps))
its free project. thanks man for make it read my comment only as a friendly.

edit: 1 & 5 fixed when i used HTTP injector.

VPN is working fine, LED is working fine.
With my phone I have to disable the fast charging option for fast charging to work.
GApps work fine.
What phone are you using?

 

[AfreenOnXDA]

Hi thanks all for the reports. I'll see if I can work on a fix for the call issues along with official support for W8 models.

I am still working on the project, so dont worry about that, but just expect a small delay between releases while I sort some stuff

When is the next update coming out?? Really excited for it!!

 

[fakemanoan]

When is the next update coming out?? Really excited for it!!

I might have something ready by next week

 

[RDPCode_COOL]

Hello, scrcpy cannot be used normally in lineage19.1, but it can be used normally in lineage18.1
https://github.com/Genymobile/scrcpy

An error occurred
app_process: Could not open boot oat file for extracting boot class path: File /apex/com.android.art/javalib/boot.art:/system/framework/boot-framework.art!/system/etc/arm64/boot-image.vdex does not exist.

app_process: Could not open boot oat file for extracting boot class path: File /apex/com.android.art/javalib/boot.art:/system/framework/boot-framework.art!/system/etc/arm64/boot-image.vdex does not exist.

 

[fakemanoan]

New Lineage OS releases for Novemeber. Major changes include:
- Synced with LineageOS sources, we have novemeber security updates
- UI performance dramatically improved due to prebuilt HWC components
- Bluetooth audio fixed, we were building 64bit HAL for some reason
- ZRAM values tweaked
- Added experimental aptX
- Added experimental freeform windows
- Core hotplugging disabled, causes issue with BT audio when screen is off
- Swapped to LE video codecs for now
- New power saver mode - 4 small cores, 2 big cores, tweaked frequencies (jank implementation lol)
- OpenCL fixed
- Source now lives at https://github.com/samsungexynos7420
- Fixed GPS rollover bug

Download G920 and G925F versions here:

Release Lineage OS 19.1 release for G920 and G925F devices · fakemanoan/LineageOS-Releases

Major changes since last release: Synced with LineageOS sources (Novemeber security patch) UI performance improved due to prebuilt HWC blobs kanged from nx-10.0 Bluetooth audio fixed (We are using...

github.com

Why was this release delayed?
I planned to have oreo graphics working, and although they work just fine, our HWC was actually broken, going all the way back to the first lineage 18.1 that was released. I could have released the r22p graphics in a working state, and we would get a nice performance bump in benchmarks, but HWC would still broken. I think a smoother UI is better in this case.

In order to get the faster r22p graphics, I need to rebuild from source, the current prebuilts simply dont support it. Our current source needs fixing up to get HWC working. So...

If anyone reading this knows of someone who can help us fix our HWC, please let me know. Thanks!

 

[whyareallusernamestaken]

New Lineage OS releases for Novemeber. Major changes include:
- Synced with LineageOS sources, we have novemeber security updates
- UI performance dramatically improved due to prebuilt HWC components
- Bluetooth audio fixed, we were building 64bit HAL for some reason
- ZRAM values tweaked
- Added experimental aptX
- Added experimental freeform windows
- Core hotplugging disabled, causes issue with BT audio when screen is off
- Swapped to LE video codecs for now
- New power saver mode - 4 small cores, 2 big cores, tweaked frequencies (jank implementation lol)
- OpenCL fixed
- Source now lives at https://github.com/samsungexynos7420
- Fixed GPS rollover bug

Download G920 and G925F versions here:

Release Lineage OS 19.1 release for G920 and G925F devices · fakemanoan/LineageOS-Releases

Major changes since last release: Synced with LineageOS sources (Novemeber security patch) UI performance improved due to prebuilt HWC blobs kanged from nx-10.0 Bluetooth audio fixed (We are using...

github.com

Why was this release delayed?
I planned to have oreo graphics working, and although they work just fine, our HWC was actually broken, going all the way back to the first lineage 18.1 that was released. I could have released the r22p graphics in a working state, and we would get a nice performance bump in benchmarks, but HWC would still broken. I think a smoother UI is better in this case.

In order to get the faster r22p graphics, I need to rebuild from source, the current prebuilts simply dont support it. Our current source needs fixing up to get HWC working. So...

If anyone reading this knows of someone who can help us fix our HWC, please let me know. Thanks!

Thanks for the update. No support for w8 yet right? At the moment I'm on stock testing a 'new' s7 edge battery which drains fast and has the phone crashing dropping from 65% to 0% .

 

[Jose255]

Cada vez que hago llamada no se escucha nada,tengo que activar altavoz y otra desactivar para que funcione,arregle eso,es la mejor rom que eh probado hasta ahora

 

[malim20]

Hi @fakemanoan. I hope you're well. With the latest update the screen input isn't working like the last time. I have gestures enabled.
I dirty flashed the latest version onto the 2022-10-08 version. Thank you for all your hard work!

 

[Wolf Alpha]

New Lineage OS releases for Novemeber. Major changes include:
- Synced with LineageOS sources, we have novemeber security updates
- UI performance dramatically improved due to prebuilt HWC components
- Bluetooth audio fixed, we were building 64bit HAL for some reason
- ZRAM values tweaked
- Added experimental aptX
- Added experimental freeform windows
- Core hotplugging disabled, causes issue with BT audio when screen is off
- Swapped to LE video codecs for now
- New power saver mode - 4 small cores, 2 big cores, tweaked frequencies (jank implementation lol)
- OpenCL fixed
- Source now lives at https://github.com/samsungexynos7420
- Fixed GPS rollover bug

Download G920 and G925F versions here:

Release Lineage OS 19.1 release for G920 and G925F devices · fakemanoan/LineageOS-Releases

Major changes since last release: Synced with LineageOS sources (Novemeber security patch) UI performance improved due to prebuilt HWC blobs kanged from nx-10.0 Bluetooth audio fixed (We are using...

github.com

Why was this release delayed?
I planned to have oreo graphics working, and although they work just fine, our HWC was actually broken, going all the way back to the first lineage 18.1 that was released. I could have released the r22p graphics in a working state, and we would get a nice performance bump in benchmarks, but HWC would still broken. I think a smoother UI is better in this case.

In order to get the faster r22p graphics, I need to rebuild from source, the current prebuilts simply dont support it. Our current source needs fixing up to get HWC working. So...

If anyone reading this knows of someone who can help us fix our HWC, please let me know. Thanks!

Hello. How can I do the update ?? Flash directly the new ROM or i need to delete the old one ??
Thanks. You do good and clean rom