[ROM][UNOFFICIAL][12.1][OTA][Material You][Signature Spoofing][Open Source][Encryption] LineageOS 19.1 for Galaxy Note10/Note10+/Note10+ 5G Exynos
- Thread starter Linux4
- Start date
Thank you for the work!
The battery drain was mentioned earlier. Is this a one time case only and if not, is there a solution to it?
The battery drain was mentioned earlier. Is this a one time case only and if not, is there a solution to it?
As described in OP,
- Any Q or R based firmware installed on your device.
These two ROMs are the same I presume?
[ROM]LineageOS 19.0(W/ Signature spoofing)/Android 12 + Material You for N10/N10+/N10+ 5G Exynos
LineageOS 19.0 for Galaxy Note10 Series /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have...
forum.xda-developers.com
These two ROMs are the same I presume?
[ROM]LineageOS 19.0(W/ Signature spoofing)/Android 12 + Material You for N10/N10+/N10+ 5G Exynos
LineageOS 19.0 for Galaxy Note10 Series /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have...
Absolutely not, that ROM has extremely weakened security...
Other than that it's literally using kanged official 18.1 sources by me...
srdempster
Senior Member
ROM installed and working fine no issues. Minor niggle with screen glitches but otherwise using as daily driver. Got gPay working with Lygisk too
I'm sorry but SM-N975W is a Qualcomm model, as you can see in the thread's title only Exynos models are supported, other than that you can't even unlock your bootloader on Qualcomm models.
srdempster
Senior Member
This is quite excellent, except i just cant get google One to restore my messages and call logs... but ill find a work around
i just wish terribly that i could change the font and for livedisplay .
i just wish terribly that i could change the font and for livedisplay .
New builds are up, see https://lineage.linux4.de/changes/d2s.html for changelog.
Last edited:
srdempster
Senior Member
Had to do a full reset but suspect its due to magisk modules not anything in the ROM. Also big improvement to mobile network reception as 3 UK is very poor where I live. I now get reception in my front room with this version but not with the previous one!
I've flashed the recovery file with Odin with PASS. However, unable to boot into recovery.
ODIN MODE (DT Load Fail)
[UFDT] DT Entry: not found rev 8x18
Load Kernel: Could not do normal boot.
Tried to use Heimdall, but returned this:
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12
OR
Initialising protocol...
ERROR: Failed to send data!Releasing device interface...
Any advice on how to proceed please?
ODIN MODE (DT Load Fail)
[UFDT] DT Entry: not found rev 8x18
Load Kernel: Could not do normal boot.
Tried to use Heimdall, but returned this:
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12
OR
Initialising protocol...
ERROR: Failed to send data!Releasing device interface...
Any advice on how to proceed please?
Last edited:
I usually install it with twrp.
1. twrp flash
2. full erase, write yes
3. change the "data" partition
twrp / wipe / wipe advanced / select data - repair or change file / change file / ext4
4. restart recovery mode
5. flash rom, gapps, magisk optional if you want
6. reboot
hopefully, it will start normally, but twrp will be replaced by lineage recovery, and if you want to update the rom in future updates you should update it with lineage recovery, because if you flash twrp again, after booting this rom, it will cause errors in twrp.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
11
LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
- Follow the instructions here
Downloads:
- Builds: https://lineage.linux4.de
- GApps: MindTheGapps
Reporting Bugs
- DO NOT Report bugs if you're running a custom kernel or you installed Xposed
- DO NOT Report bugs if you're using TWRP
- DO NOT Report bugs while having Magisk installed (especially with Zygisk enabled)
- Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
- If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
- If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:What is your-- LineageOS version: LineageOS Download url: Gapps version: Did you-- wipe: restore with titanium backup: reboot after having the issue: Are you using-- a task killer: a non-stock kernel: other modifications: Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Support
Telegram group
Contributors
Linux4
Source Code: https://github.com/LineageOS
Kernel source: https://github.com/LineageOS/android_kernel_samsung_exynos9820/tree/lineage-19.15Requirements:
- Any Q, R or S based firmware installed on your device.
Pre-Install Instructions
Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.
- Connect the device to a Wi-Fi network.
- Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
- From within the Developer options menu, enable OEM unlock.
- Power off the device, and boot it into download mode:
- With the device powered off, hold Volume Down + Volume Up and connect USB cable to PC.
- Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
- Your device will reboot, you may now unplug the USB cable from your device.
- The device will demand you format userdata, please follow the onscreen instructions to do so.
- Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
- Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.
Installing LineageOS for the first time
- Flash lineage recovery
Only the provided lineage recovery will be supported,
using TWRP might result in a possible data loss!!
If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot - Boot lineage recovery
IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery!
If using Odin untick auto-reboot before flashing.
After flashing reboot by pressing Volume Down and Power for approximately 7 seconds,
immediately hold Volume Up and Power to boot recovery
IMPORTANT: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to
boot recovery via Volume Up, Bixby and Power. - Factory reset using Factory reset -> Format data/factory reset
Warning: Unlike TWRP this will also erase internal storage! - Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
Then run adb sideload <path to your lineage.zip> on your PC
Optional: - Sideload GApps and magisk by repeating above step
with their zip/apk
Magisk
As this ROM has a working ramdisk sideloading the magisk apk is enough, just as it is
on every other device, no bootimage with magisk included or installing to recovery is needed!
I also strongly recommend to use Lygisk instead,
which is a fork of Magisk that aims to improve support for devices with FBE that can't (and shouldn't anyways!) decrypt userdata in recovery,
this will also fix OTAs getting stuck while having installed Magisk.43
Fixed builds are on the way and will be uploaded later today, sorry for this
