[ROM][UNOFFICIAL][12]LineageOS 19.1 for Galaxy S20/S20+/S20 Ultra Exynos
- Thread starter josip-k
- Start date
Thanks for the good work
Is there any lineageos version for galaxy note 20 ultra?
I tried so hard but until now I'm not able to find it, I be grateful if anyone could help
you need to be looking here:
Samsung Galaxy Note 20 Ultra
The Samsung Galaxy Note 20 Ultra is a 6.9" phone with a 1440x3200p resolution display. The Qualcomm SM8250 Snapdragon 865+ chipset is paired with 12GB of RAM and 256/512GB of storage. The main camera is 108+12+12MP and the selfie camera is 10MP. The battery has a 4500mAh capacity.
forum.xda-developers.com
I'm building lineage 19.1 for x1s but camera don't work. On build made by DeHuMaNiZeD on March of 2022 camera is working. But the device tree change a lot from March to today. My phone is updated with the latest rom from Samsung. Any sugestion?
you can make calls without volte on AOSP with an app called VozApp, download it from playstore, the principal problem is that battery drains a little bit faster
It was never great due to the dev audience being reduced as in the USA, where most devs traditionally are, they got bootloader locked devices
I wouldnt call it dead, and theres always GSI's....though you will lose VoLTE and VoWIFI (oh and Samsung bloatware)
See here : https://forum.xda-developers.com/t/project-treble-gsi-on-s20-series.4376823/
and here: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
A12 GSI's are stable, A13 are alpha....
currently best stock option is Beyond ROM: https://forum.xda-developers.com/t/...-patch-g980f-g981b-g985f-g986b-g988b.4203109/
In the US there are Snapdragon SOC's anyway. Europe is using exynos instead. They are incredible good devs out there too but unfortunately not for this device yet
But Yes currently GSI's are the best choice if you want AOSP based ROMs.
Idebutterpiep
Senior Member
hello. when in lineage recovery and sending command to adb sideload lineage i am stuck at "veriying update package". first time it was stuck at (~1%) and each time thereafter stuck at (~0%).
is this normal. do i just wait? i have waited like 10-15 minutes and it doesnrt change.
is this normal. do i just wait? i have waited like 10-15 minutes and it doesnrt change.
ok it looks like using a usb a to usb c cable instead of usb c to usb c solved this issue. successfully flashed!
Hi!
Thanks for great job making this rom !
I was looking for fully open source rom, with no google apps, for my s20+ and found this (maybe only?) one.
Flashed it and works perfectly except camera resolution problem as reported by others (i don't care, i still can take pictures).
However GPS is not working anymore since i flashed this rom. I saw nobody else reporting this problem so I wonder if i missed something of it is related to the fact that i did not flash gapps.
Any idea ?
Thanks
Thanks for great job making this rom !
I was looking for fully open source rom, with no google apps, for my s20+ and found this (maybe only?) one.
Flashed it and works perfectly except camera resolution problem as reported by others (i don't care, i still can take pictures).
However GPS is not working anymore since i flashed this rom. I saw nobody else reporting this problem so I wonder if i missed something of it is related to the fact that i did not flash gapps.
Any idea ?
Thanks
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
1After a lot of tinkering around, finally EVERYTHING works flawlessly - in some regards much better that the stock firmware.
I've never cared about VoLTE or Wi-Fi calling, so these "shortcomings" don't affect me at all. If anything, Ihavehad 6 things to gripe about:
- Camera was definitely one of them however, after extensive testing I've settled for Open Camera which works quite well. In fact, other than somewhat excessive noise in low light (which can easily be corrected with Snapseed), and a buggy panoramic mode, everything works just fine. GCam just doesn't work for me, so please don't bother suggesting it. I know some people swear by it but for me it's a no, no. Other camera apps that would be worth trying: Secure Camera (Graphene OS), Libre Camera and Simple Camera.
- [Edited - Solved
] Additional touch / About 50% of time, the app on the main screen, directly behind the fingerprint sensor, was launched when the screen was unlocked - which was hellishly frustrating. In other words, the fingerprint reader allows unlocking the screen, while also registering a touch after the screen gets unlocked. The fingerprint reader works wonders and it's definitely faster than the stock ROM however, this bug must be addressed asap. (Edit) I've created a simple task in Tasker, for an overlay scene to obscure (mask) the area on the screen directly behind the fingerprint reader, and then destroy the scene 600 ms after unlocking the screen. The described issue is specific to Nova. Trebuchet, the build-in launcher doesn't seem to have this issue. - [Edited - Solved ] TWRP / While the developers may very well have their own technical reasons for adopting a proprietary recovery, not having the ability to create a nandroid (full image of all partitions) that could be saved, transferred and later reinstalled after a full wipe (or two weeks of configurations), in itself, would have been a deal breaker for me. The built-in SeedVault backup is a joke by comparison since none of the system-level configurations (root, Magisk modules, LSPosed, device-protected data, external data, obb, etc.) can be saved through the built-in backup. (Edit) Although I haven't yet restored a nandroid backup, it seems that flashing the appropriate TWRP through Odin works just fine - that's true ONLY after doing a full data wipe and manually installing and customizing the ROM - while using Lineage recovery.
- [Edited - Solved ] The partial-screenshot implementation is awful and yet another reason for frustration. While I do understand the privacy concerns behind this idea, the implementation is horrible, even for someone with high technical skills. 90% of users trying this feature would probably end up throwing the phone out the window. (Edit) You can get unrestricted screenshots, theming, UI customizations and much more through a Magisk/LSPosed module called AOSPMods
- [Edited - Solved ] The screen casting no longer works directly, as it was the case with Smart View on stock Android. The phone needs to be paired with a smart TV through WiFi Direct and then the screen cast itself is taken care of by a nice (paid) app called BubbleUPnP. Once the setup was completed, subsequent casting is a breeze and it's better that the stock Smart View.
- If you're like me and you're bothered by the nonsensical privacy Location indicators that keep on showing a green "Location" button alongside the green indicator in the right corner of the status bar every single time an app or service is accessing location in the background (overly annoying once you notice it), you can re enable the on/off switch in Developer Options (inexplicably removed by the developers of this ROM) with the following adb command:
The option needs to be disabled after each reboot as it'll turns back on automatically. Bump!Code:
adb shell cmd device_config put privacy location_indicator_settings_enabled true default
- The ROM is very stable,
- Rooted (Magisk adb sideload) without any hickups,
- MicroG works perfectly fine.
- All (tried) Magisk modules worked without any problems and yes,
- Even LSPosed (XPosed) works just fine (I know I just opened up Pandora's box but I wanted to share with the community that it does work, apparently without causing any exctinction-level events.
Below is a list of suggestions & features that didn't work for me (to be continually updated):
Screen Cast (doesn't work on newer TVs however, it does work with Roku)- see the solution above- WI-Fi Direct (hit & miss)
- Aps with embedded (web view) Google Maps won't be able to display the map.
- The Alarm displayed on AOD is always wrong, thus meaningless. I would suggest either removing it altogether, or provide ways to toggle the notification (especially when the native alarm/clock is not being used).
- Native UI customization from Lineage 17 were inexplicably removed - although the above solution works, it forces users to install LSPosed.
This ROM is now my daily driver and honestly, I can't wait for the Lineage 20 release - especially given the tons of added features, including new native camera.
A big thank you to the developers and all contributors for such a great ROM.
1 -
8
LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
- Follow the instructions here
Downloads:
- Builds: https://exynoobs.github.io/OTA/
- GApps: MindTheGapps
Reporting Bugs
- DO NOT Report bugs if you're running a custom kernel or you installed Xposed
- DO NOT Report bugs if you're using TWRP
- Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
- If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
- If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:What is your-- LineageOS version: LineageOS Download url: Gapps version: Did you-- wipe: restore with titanium backup: reboot after having the issue: Are you using-- a task killer: a non-stock kernel: other modifications: Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Support
Telegram group
Contributors
DeHuMaNiZeD
Linux4
Synt4x.93
Alastor89
Device tree and kernel source code:
Exynoobs github6Requirements:
- S based firmware (OneUI4)
Pre-Install Instructions
Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.
- Connect the device to a Wi-Fi network.
- Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
- From within the Developer options menu, enable OEM unlock.
- Power off the device, and boot it into download mode:
- With the device powered off, hold Volume Down + Volume Up and connect USB cable to PC.
- Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
- Your device will reboot, you may now unplug the USB cable from your device.
- The device will demand you format userdata, please follow the onscreen instructions to do so.
- Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
- Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.
Installing LineageOS for the first time
- Flash lineage recovery
Only the provided lineage recovery will be supported,
using TWRP might result in a possible data loss!!
If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot - Boot lineage recovery
IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery!
If using Odin untick auto-reboot before flashing.
After flashing reboot by pressing Volume Down and Power for approximately 7 seconds,
immediately hold Volume Up and Power to boot recovery
IMPORTANT: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to
boot recovery via Volume Up and Power. - Factory reset using Factory reset -> Format data/factory reset
Warning: Unlike TWRP this will also erase internal storage! - Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
Then run adb sideload <path to your lineage.zip> on your PC
Optional: - Sideload GApps and magisk by repeating above step
with their zip/apk
4New builds are up, there were alot of changes, please read the changelog on https://exynoobs.github.io/OTA and enjoy.2
Yup. I installed twrp flashed microg. Microg and everything works perfectly. Very stable. But no signature spoofing. Keeping it as my daily driver.
