• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ROM][UNOFFICIAL][12][Material You][Signature Spoofing] LineageOS 19.0 for Galaxy Note10/Note10+/Note10+ 5G Exynos

Search This thread

Linux4

Senior Member
1607247455067.png


LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

Instructions:
  • Follow the instructions here

Downloads:

Reporting Bugs
  • DO NOT Report bugs if you're running a custom kernel or you installed Xposed
  • DO NOT Report bugs if you're using TWRP
  • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
  • If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
  • If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log

Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:

Did you--
wipe:
restore with titanium backup:
reboot after having the issue:

Are you using--
a task killer:
a non-stock kernel:
other modifications:

Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:


Support
Telegram group

Contributors
Linux4
Source Code: Coming soon
Kernel source: https://github.com/Linux4/android_kernel_samsung_exynos9820
 
Last edited:

Linux4

Senior Member
Requirements:
  • Any Q or R based firmware installed on your device.

Pre-Install Instructions

Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.

  1. Connect the device to a Wi-Fi network.
  2. Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
    • From within the Developer options menu, enable OEM unlock.
  3. Power off the device, and boot it into download mode:
    • With the device powered off, hold Volume Down + Volume Up and connect USB cable to PC.
    • Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
  4. Your device will reboot, you may now unplug the USB cable from your device.
  5. The device will demand you format userdata, please follow the onscreen instructions to do so.
  6. Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
  7. Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.

Installing LineageOS for the first time
  1. Flash lineage recovery
    Only the provided lineage recovery will be supported,
    using TWRP might result in a possible data loss!!

    If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
    If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot
  2. Boot lineage recovery
    IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery!
    If using Odin untick auto-reboot before flashing.
    After flashing reboot by pressing Volume Down and Power for approximately 7 seconds,
    immediately hold Volume Up and Power to boot recovery
    IMPORTANT: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to
    boot recovery via Volume Up, Bixby and Power.
  3. Factory reset using Factory reset -> Format data/factory reset
    Warning: Unlike TWRP this will also erase internal storage!
  4. Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
    Then run adb sideload <path to your lineage.zip> on your PC
    Optional:
  5. Sideload GApps and magisk by repeating above step
    with their zip/apk

Magisk
As this ROM has a working ramdisk sideloading the magisk apk is enough, just as it is
on every other device, no bootimage with magisk included or installing to recovery is needed!
I also strongly recommend to use Lygisk instead,
which is a fork of Magisk that aims to improve support for devices with FBE that can't (and shouldn't anyways!) decrypt userdata in recovery,
this will also fix OTAs getting stuck while having installed Magisk.
 
Last edited:

Linux4

Senior Member
Reading through the changelogs I noticed support for the s pen. What apps need to be installed or are pre-installed? Excellent work to bring 12 to the Note so early.

There are no preinstalled apps for use with S-Pen.
Any third party app with support for a stylus should work (e.g Notes apps like Squid, etc...).
 

xda9500

New member
Feb 18, 2021
1
2
感谢你们为rom所做的一切,期待正式发布。

Translated by GT: Thank you for everything you have done for rom and look forward to the official release.
 
Last edited by a moderator:
  • Like
Reactions: Linux4 and crhylove

keidnoi

Member
Nov 22, 2012
14
3
did you upgrade from 18.1? if yes, it's because the clock app is pure aosp right now on lineage 19. Wiping app data for the clock app will fix it.
I upgraded from stock rom. I wiped the data while flashing this rom.
But the alarm clock app is not working. I wake up late every day clock does not wake me
 

44cK3r

New member
Oct 17, 2020
2
0
This is BS it doesn't sorry I'm being mean I'm just really annoyed it wouldn't boot into recovery mode infinite download mode please someone tell me how to fix and if it requires flashing the stock stuff I'm throwing this stupid phone in the bin sorry. The reason I'm not doing it is because it literally says 10 years to download and I'm not lying
 
Last edited:

ICV

Senior Member
May 18, 2008
157
32
Great ROM, thanks to developers
But bluetooth calls not working, known bug or its only me?
 

Top Liked Posts

  • 1
    New builds are up including some more lineage features added back and third party keyboard apps no longer crashing.
    1
    Possibly. Yet to install the ROM.

    The requirement is Android 10 or 11. Is it possible to upgrade from Android 9 directly?
    As described in OP,
    • Any Q or R based firmware installed on your device.
    I've upgraded from Dr Ketan's one, but you have to clean flash following the instructions
    1
    These two ROMs are the same I presume?


    Absolutely not, that ROM has extremely weakened security...
    Other than that it's literally using kanged official 18.1 sources by me...
    1
    Still haven't received any response(s) on this question. Thanks in advance.

    I'm sorry but SM-N975W is a Qualcomm model, as you can see in the thread's title only Exynos models are supported, other than that you can't even unlock your bootloader on Qualcomm models.
  • 6
    1607247455067.png


    LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Instructions:
    • Follow the instructions here

    Downloads:

    Reporting Bugs
    • DO NOT Report bugs if you're running a custom kernel or you installed Xposed
    • DO NOT Report bugs if you're using TWRP
    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
    • If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
    • If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log

    Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

    Code:
    What is your--
    LineageOS version:
    LineageOS Download url:
    Gapps version:
    
    Did you--
    wipe:
    restore with titanium backup:
    reboot after having the issue:
    
    Are you using--
    a task killer:
    a non-stock kernel:
    other modifications:
    
    Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:


    Support
    Telegram group

    Contributors
    Linux4
    Source Code: Coming soon
    Kernel source: https://github.com/Linux4/android_kernel_samsung_exynos9820
    3
    Requirements:
    • Any Q or R based firmware installed on your device.

    Pre-Install Instructions

    Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.

    1. Connect the device to a Wi-Fi network.
    2. Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
      • From within the Developer options menu, enable OEM unlock.
    3. Power off the device, and boot it into download mode:
      • With the device powered off, hold Volume Down + Volume Up and connect USB cable to PC.
      • Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
    4. Your device will reboot, you may now unplug the USB cable from your device.
    5. The device will demand you format userdata, please follow the onscreen instructions to do so.
    6. Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
    7. Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.

    Installing LineageOS for the first time
    1. Flash lineage recovery
      Only the provided lineage recovery will be supported,
      using TWRP might result in a possible data loss!!

      If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
      If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot
    2. Boot lineage recovery
      IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery!
      If using Odin untick auto-reboot before flashing.
      After flashing reboot by pressing Volume Down and Power for approximately 7 seconds,
      immediately hold Volume Up and Power to boot recovery
      IMPORTANT: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to
      boot recovery via Volume Up, Bixby and Power.
    3. Factory reset using Factory reset -> Format data/factory reset
      Warning: Unlike TWRP this will also erase internal storage!
    4. Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
      Then run adb sideload <path to your lineage.zip> on your PC
      Optional:
    5. Sideload GApps and magisk by repeating above step
      with their zip/apk

    Magisk
    As this ROM has a working ramdisk sideloading the magisk apk is enough, just as it is
    on every other device, no bootimage with magisk included or installing to recovery is needed!
    I also strongly recommend to use Lygisk instead,
    which is a fork of Magisk that aims to improve support for devices with FBE that can't (and shouldn't anyways!) decrypt userdata in recovery,
    this will also fix OTAs getting stuck while having installed Magisk.
    2
    Features

    • SELinux enforcing
    • AES-256-XTS FBE encryption
    • Latest Linux 4.14.x kernel
    • All cameras are working
    • Ramdisk is working

    Known issues

    • VoLTE/VoWiFi
    • LineageOS specific features like livedisplay (for now)
    • You tell me
    2
    All sound systems are not working
    Who encountered this kind of problem

    Fixed builds are on the way and will be uploaded later today, sorry for this