[ROM][UNOFFICIAL][12][OTA][OSS] LineageOS 19.1 for Galaxy Note9 Exynos

Search This thread

josip-k

Senior Member
Feb 20, 2011
3,919
2,714
25
Jastrebarsko
Samsung Galaxy S20
ASUS ZenFone 8
1607247455067.png


LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

Instructions:
  • Follow the instructions here

Downloads:

Reporting Bugs
  • DO NOT Report bugs if you're running a custom kernel or you installed Xposed
  • DO NOT Report bugs if you're using TWRP
  • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
  • If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
  • If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log

Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:

Did you--
wipe:
restore with titanium backup:
reboot after having the issue:

Are you using--
a task killer:
a non-stock kernel:
other modifications:

Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:


Support
Telegram group

Contributors
josip-k
Linux4
Synt4x.93

Source Code: Exynoobs
Kernel source: https://github.com/Exynoobs/android_kernel_samsung_universal9810
 
Last edited:

josip-k

Senior Member
Feb 20, 2011
3,919
2,714
25
Jastrebarsko
Samsung Galaxy S20
ASUS ZenFone 8
Requirements:
  • Latest firmware

Pre-Install Instructions

Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.

  1. Connect the device to a Wi-Fi network.
  2. Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
    • From within the Developer options menu, enable OEM unlock.
  3. Power off the device, and boot it into download mode:
    • With the device powered off, hold Volume Down + Volume Up and connect USB cable to PC.
    • Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
  4. Your device will reboot, you may now unplug the USB cable from your device.
  5. The device will demand you format userdata, please follow the onscreen instructions to do so.
  6. Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
  7. Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.

Installing LineageOS for the first time
  1. Flash lineage recovery
    Only the provided lineage recovery will be supported,
    using TWRP might result in a possible data loss!!

    If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
    If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot
  2. Boot lineage recovery
    IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery!
    If using Odin untick auto-reboot before flashing.
    After flashing reboot by pressing Volume Down and Power for approximately 7 seconds,
    immediately hold Volume Up, Bixby and Power to boot recovery
    boot recovery via Volume Up, Bixby and Power.
  3. Factory reset using Factory reset -> Format data/factory reset
    Warning: Unlike TWRP this will also erase internal storage!
  4. Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
    Then run adb sideload <path to your lineage.zip> on your PC
    Optional:
  5. Sideload GApps and magisk by repeating above step
    with their zip/apk
 
  • Like
Reactions: higez1 and OXXOPwzy

josip-k

Senior Member
Feb 20, 2011
3,919
2,714
25
Jastrebarsko
Samsung Galaxy S20
ASUS ZenFone 8
  • This build does not use the stock vendor, instead it's built on top of new trees, which have been worked on for some time. The source is on our github, link in OP. You also get a few neat features like fingerprint gestures, and bixby button that actually works with both normal and long press.
  • I suggest using OpenCamera since stock one has some issues with flash.
  • These builds are signed with our release keys.
  • star2lte and crownlte support will come a bit later as i don't own the devices, but they will be supported eventually.
THESE BUILDS HAVE FORCE ENCRYPTION ENABLED, AND ONLY LINEAGE RECOVERY IS SUPPORTED. THESE THINGS WILL NOT CHANGE. IF YOU DON'T USE LINEAGE RECOVERY, AND SUFFER FROM DATA LOSS, DON'T COMPLAIN HERE.
 

OXXOPwzy

New member
Mar 2, 2022
2
2
My 1 week review as daily use :
1. smooth, stable (uptime 122h)
2. Wifi, bluetooth OK (no problem)
3. battery ok, nothing special, at the end of the day, with call and nomal usage (3-4h screen on with youtube (on browser) and video call with jitsi) >50%
4. (i don't use anything from google)

just perfect for me !
thank you @DeHuMaNiZeD very good job !
 
  • Like
Reactions: sulimanp

sherry9oct

Member
Mar 21, 2011
5
0
I am struggling to flash "Flash lineage recovery" .
I am trying to flash recovery.img before which it has to be added to .tar. But the tar file that i am creating using 7zip is not working. Can you please guide how to create tar file from recovery.img to be flashed through ODIN.
 
I am struggling to flash "Flash lineage recovery" .
I am trying to flash recovery.img before which it has to be added to .tar. But the tar file that i am creating using 7zip is not working. Can you please guide how to create tar file from recovery.img to be flashed through ODIN.
if you have TWRP you can just flash lineage recovery via twrp, no PC needed.
 

loci

Member
Aug 18, 2007
30
5
Thank you for the effort!
I had a boot loop when I updated to this build.
I tried to reflash through ADB twice, but still boot-looping. Had to go back to build 20220219.
Any suggestions?

I did not flash the recovery partition again - is it necessary?
I did not have any issue when replacing stock fw with this latest build. Used Lineage recovery to clear data/cache and installed via adb. No boot-loops. Very smooth.
 
I did not have any issue when replacing stock fw with this latest build. Used Lineage recovery to clear data/cache and installed via adb. No boot-loops. Very smooth.
Same here, can confirm. Only problem i got was flashing lineage recovery with odin ( unrooted stock fw ), so i flashed twrp and then from twrp flashed lineage recovery 😁. This is one snappy motherflicker 😎😎
 

Top Liked Posts

  • There are no posts matching your filters.
  • 7
    1607247455067.png


    LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.

    LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Instructions:
    • Follow the instructions here

    Downloads:

    Reporting Bugs
    • DO NOT Report bugs if you're running a custom kernel or you installed Xposed
    • DO NOT Report bugs if you're using TWRP
    • Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
    • If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
    • If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log

    Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.

    Code:
    What is your--
    LineageOS version:
    LineageOS Download url:
    Gapps version:
    
    Did you--
    wipe:
    restore with titanium backup:
    reboot after having the issue:
    
    Are you using--
    a task killer:
    a non-stock kernel:
    other modifications:
    
    Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:


    Support
    Telegram group

    Contributors
    josip-k
    Linux4
    Synt4x.93

    Source Code: Exynoobs
    Kernel source: https://github.com/Exynoobs/android_kernel_samsung_universal9810
    4
    New build is up
    3
    • This build does not use the stock vendor, instead it's built on top of new trees, which have been worked on for some time. The source is on our github, link in OP. You also get a few neat features like fingerprint gestures, and bixby button that actually works with both normal and long press.
    • I suggest using OpenCamera since stock one has some issues with flash.
    • These builds are signed with our release keys.
    • star2lte and crownlte support will come a bit later as i don't own the devices, but they will be supported eventually.
    THESE BUILDS HAVE FORCE ENCRYPTION ENABLED, AND ONLY LINEAGE RECOVERY IS SUPPORTED. THESE THINGS WILL NOT CHANGE. IF YOU DON'T USE LINEAGE RECOVERY, AND SUFFER FROM DATA LOSS, DON'T COMPLAIN HERE.
    2
    Requirements:
    • Latest firmware

    Pre-Install Instructions

    Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.

    1. Connect the device to a Wi-Fi network.
    2. Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
      • From within the Developer options menu, enable OEM unlock.
    3. Power off the device, and boot it into download mode:
      • With the device powered off, hold Volume Down + Volume Up and connect USB cable to PC.
      • Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
    4. Your device will reboot, you may now unplug the USB cable from your device.
    5. The device will demand you format userdata, please follow the onscreen instructions to do so.
    6. Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
    7. Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.

    Installing LineageOS for the first time
    1. Flash lineage recovery
      Only the provided lineage recovery will be supported,
      using TWRP might result in a possible data loss!!

      If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
      If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot
    2. Boot lineage recovery
      IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery!
      If using Odin untick auto-reboot before flashing.
      After flashing reboot by pressing Volume Down and Power for approximately 7 seconds,
      immediately hold Volume Up, Bixby and Power to boot recovery
      boot recovery via Volume Up, Bixby and Power.
    3. Factory reset using Factory reset -> Format data/factory reset
      Warning: Unlike TWRP this will also erase internal storage!
    4. Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
      Then run adb sideload <path to your lineage.zip> on your PC
      Optional:
    5. Sideload GApps and magisk by repeating above step
      with their zip/apk
    1
    E2001: Failed to update odm image :/