[ROM][UNOFFICIAL][12L][N7100][Samsung Galaxy Note 2][LineageOS 19.1][BETA]
- Thread starter html6405
- Start date
Then you are still in the download mode.
You have to force a reboot and directly press the key combination for the recovery (volume up, home and power).
Untick auto reboot in Odin.
Reboot into the download mode, flash TWRP and reboot manually into the recovery.
This means that you're using the wrong TWRP, I guess you've installed the t0lte version.
Samsung Galaxy Note 2
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
You have to wipe data.
V24.04 and v24.2 maybe won't work at all, 24.1 should work.
Similar threads
- Poll
Top Liked Posts
-
4I really would recommend to use the device without gapps, I'm using now my Note 2 LTE since one month with microG and I'm really satisfied with the speed and all of it.
I'm really sorry, but I don't have the time to care for another ROM, I'm busy with my job and family, it's already hard for me to bring updates for LineageOS ( As you know, I have to care for many users and devices ).
And I'm using already some go properties, but not all of them,
low ram is for example disabled.
But if you wan't, I could build another go version with really limited features for the n7100,
for sure it will optimize the speed. -
4I really would recommend to use the device without gapps, I'm using now my Note 2 LTE since one month with microG and I'm really satisfied with the speed and all of it.
I'm really sorry, but I don't have the time to care for another ROM, I'm busy with my job and family, it's already hard for me to bring updates for LineageOS ( As you know, I have to care for many users and devices ).
And I'm using already some go properties, but not all of them,
low ram is for example disabled.
But if you wan't, I could build another go version with really limited features for the n7100,
for sure it will optimize the speed.3
I've cleaned up all previous attempts which people made before and started with the original blobs,
and fixed every problem with a shim and so on from the beginning.
GPS then was already partly working, but without a 3D fix, so I've started a new way with a sensor listener instead of only shimming the symbol and voila
.
gps: bring back libdmitry for old gps blobs. · html6405/[email protected]
Contribute to...
github.com
gps_symbols.cpp: shim missing symbols for gpsd. · html6405/[email protected]
Contribute to...
github.com
Partly revert: Update to latest changes made in lineage-15.1 branch. · html6405/[email protected]
Contribute to...
github.com
BoardConfig.mk: gps: preload libdmitry shim for most recent gpsd. · html6405/[email protected]
Contribute to...
github.com
gps.xml: update from most recent stock ROM. · html6405/[email protected]
Contribute to...
github.com
n7100: remove not needed gps_daemon script. · html6405/[email protected]
Contribute to...
github.com
Revert "gps_symbols.cpp: shim missing symbols for gpsd." · html6405/[email protected]
This reverts commit b650d651
github.com
gps_symbols.cpp: remove getSensorList symbol. · html6405/[email protected]
Contribute to...
github.com
libdmitry.c: remove createEventQueue symbol. · html6405/[email protected]
Contribute to...
github.com
init.target.rc: remove LD_PRELOAD for gpsd. · html6405/[email protected]
Contribute to...
github.com
n7100: include: import own gps header files to get 3D fix working. · html6405/[email protected]
Contribute to...
github.com
n7100: gps: remove gps shim, it's not needed anymore. · html6405/[email protected]
Contribute to...
github.com
Honestly I don't use any of them, I only own test devices in a very bad shape, but I'm using the Samsung Galaxy Note 10.1 tablet for example, it also has the exynos4.Also, what phone are you on? An exynos4 one? I know the S3 and N2 are very very close siblings; just curious about your motiviation to work on Exynos4 based devices
Thats really bad :/.21
Heh, typical, I notice that often as well; that sometimes, people don't know quite what they are doing, so make things worse, before making things better.I've cleaned up all previous attempts which people made before and started with the original blobs,
and fixed every problem with a shim and so on from the beginning.
GPS then was already partly working, but without a 3D fix, so I've started a new way with a sensor listener instead of only shimming the symbol and voila.
Super thanks for that. Sad to see you not using a primary exynos4 based device, as that risks abandonment (or loss of interested) but Much thanks for your work regardless. It is very much appreciated.
Btw, would it be useful to go over the partitioning scheme? Since the number of users of these platforms is so limited, revising the partitioning scheme makes sense. I know even on the i9100 (S2) they are forced to repartition ...
Currently, I have:
But as I'm going to install your ROM now, will actually increase `RECOVERY` to 32M; stealing it from the unused 100M cached, and shrink that too 1024k like the other unused partitions ...~ # fdisk -l /dev/block/mmcblk0
Found valid GPT with protective MBR; using GPT
Disk /dev/block/mmcblk0: 30777344 sectors, 2740M
Logical sector size: 512
Disk identifier (GUID): 52444e41-494f-2044-4d4d-43204449534b
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 30777310
Number Start (sector) End (sector) Size Code Name
1 8192 16383 4096K 0700 BOTA0
2 16384 24575 4096K 0700 BOTA1
3 24576 65535 20.0M 0700 EFS
4 65536 73727 4096K 0700 m9kefs1
5 73728 81919 4096K 0700 m9kefs2
6 81920 90111 4096K 0700 m9kefs3
7 90112 106495 8192K 0700 PARAM
8 106496 122879 8192K 0700 BOOT
9 122880 139263 8192K 0700 RECOVERY
10 139264 319487 88.0M 0700 RADIO
11 319488 327679 4096K 0700 TOMBSTONES
12 327680 532479 100M 0700 CACHE
13 532480 3678207 1536M 0700 SYSTEM
14 3678208 3680255 1024K 0700 HIDDEN
15 3680256 3682303 1024K 0700 OTA
16 3682304 30777310 12.9G 0700 USERDATA -
11Code:
/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. * */
Hi,
here you can find my version for the Samsung Galaxy Note 2 on LineageOS 19.1.
At first I want to thank @rINanDO, @ChronoMonochrome for all your work which was reused here and helped a lot.
- Boot
- Audio
- Bluetooth
- Graphics
- Cameras
- GPS
- Wifi
- USB
- Video playback (HW/SW)
- OTA Updates
- Tethering via USB, WIFI and Bluetooth
- Sensors
- RIL
I would recommend to use microG instead of gapps,- NFC
- Maybe random reboots
- SD card can't be formated as internal memory, will cause a bootloop
- Maybe more
here you can find the installation instructions:
- Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
- Open Magisk and update the App (and do a reboot if it's asking)
- Enable Zygisk in Magisk
- Download and install microG installer in the Magisk manager, reboot
- Download and install safetynet-fix in the Magisk manager, reboot
- Check with a safetynet checker app and you should pass
Wanna improve your sound configs, control your charging current and more?
Now you can use my app to access all boeffla configurations, there will follow more functions.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and...play.google.com
Telegramm group:
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
XDA:DevDB Information
[ROM][12.x][N7100][BETA] LineageOS 19.1, ROM for the Samsung Galaxy Note 2
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 12.x S
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.3.0
Based On: LineageOS
Version Information
Status: Beta
Created 2021-12-30
Last Updated 2022-06-154I really would recommend to use the device without gapps, I'm using now my Note 2 LTE since one month with microG and I'm really satisfied with the speed and all of it.
I'm really sorry, but I don't have the time to care for another ROM, I'm busy with my job and family, it's already hard for me to bring updates for LineageOS ( As you know, I have to care for many users and devices ).
And I'm using already some go properties, but not all of them,
low ram is for example disabled.
But if you wan't, I could build another go version with really limited features for the n7100,
for sure it will optimize the speed.33
Just tried the AOD button: first enabled it and then disabled again... - it worked! Not sure, though, whether any of my previous attempts to modify the settings via adb played any role. I'll repeat timing of the battery with this setting. Thanks.You should be able to disable the always on display in the quick settings (AOD) and give your test a retry.
