[ROM][UNOFFICIAL][12L][N7100][Samsung Galaxy Note 2][LineageOS 19.1][BETA]

Search This thread

alexfire_s

Member
Jan 5, 2022
12
1
I'm not sure what you all want from me :p 😅.

People wanted to enjoy full gesture navigation, but this works only with the software navbar so far,
this is why I've enabled it and created the toggle_navbar script ;).
So that you can switch if you want.

We will see how LineageOS wants to handle these things in future,
until then, we have my script :).
maybe we didn't understand each other's dnkg) I don't use nav bar, only gestures. but there is such a strip bottom when opening the keyboard. can it be disabled according to your instructions?
 

Attachments

  • IMG_20220108_233005_832.jpg
    IMG_20220108_233005_832.jpg
    60.7 KB · Views: 61

porcino

Senior Member
Feb 18, 2011
291
79
maybe we didn't understand each other's dnkg) I don't use nav bar, only gestures. but there is such a strip bottom when opening the keyboard. can it be disabled according to your instructions?
You want it like this, right? This is what html6405 suggested before and I tried... Please check the discussion above!


Screenshot_20220108-233015_Brave - Beta.png
 
  • Like
Reactions: html6405

AlexALXua

Member
Sep 27, 2019
29
7
Hi everyone. After my first atteptm with 11 android and sim block issue (so needed to replace sim card) i decided again install new rom and this time switch to android 12. Of course did disabled sim-pin this time to prevent same issue again.

Did installed also bitgapps (as no opengapps for 12 yet) and Magisk.

Already using it day and found some issue what can share:

- Camera in apps like firefox (scan qr) or chrome NOT working properly. It just stuck with first image from it. But with open camera it works just fine.
- Can't find anywhere how to enable NFC (there is no such option in connected devices settings), and google pay says "please enable nfc", while i'm pass all safetynet tests and "nfc checker" says that there is NFC. So i guess NFC is not working at all yet.
- Just after install screen had "AOD" enabled, but in menu it shown as disabled. When did turn on/off it - its disabled now. So just small graphical glitch.
- When expand top bar (not sure how its called) - text animation is laggy, like low fps or something.
- if MAPS.me store maps on sdcard - it wont be loaded at all, not sure why, works if they are in internal memory.

This is all so far. Had few times app crashes but rom seems to work pretty good. Will see more in next coming days! Will test GPS soon.

Thanks a lot!

ps Ah, and just curious - I know its reported already, just want to know if there is any change to get compass to work in future? Is this missing hardware drivers or so what not possible to do?
 

html6405

Recognized Developer
Hi everyone. After my first atteptm with 11 android and sim block issue (so needed to replace sim card) i decided again install new rom and this time switch to android 12. Of course did disabled sim-pin this time to prevent same issue again.

Did installed also bitgapps (as no opengapps for 12 yet) and Magisk.

Already using it day and found some issue what can share:

- Camera in apps like firefox (scan qr) or chrome NOT working properly. It just stuck with first image from it. But with open camera it works just fine.
- Can't find anywhere how to enable NFC (there is no such option in connected devices settings), and google pay says "please enable nfc", while i'm pass all safetynet tests and "nfc checker" says that there is NFC. So i guess NFC is not working at all yet.
- Just after install screen had "AOD" enabled, but in menu it shown as disabled. When did turn on/off it - its disabled now. So just small graphical glitch.
- When expand top bar (not sure how its called) - text animation is laggy, like low fps or something.
- if MAPS.me store maps on sdcard - it wont be loaded at all, not sure why, works if they are in internal memory.

This is all so far. Had few times app crashes but rom seems to work pretty good. Will see more in next coming days! Will test GPS soon.

Thanks a lot!

ps Ah, and just curious - I know its reported already, just want to know if there is any change to get compass to work in future? Is this missing hardware drivers or so what not possible to do?
There are still parts for nfc missing in the source, it will come sooner or later with the updates,
at the moment its not working and you can't enable it.
Thx for your report, compass is not working because of a not working hal.
An open source sensor hal is used for this, optimized and overworked for the note 2.
Many people were working on this and tried to get it working, including myself, but this isn't that important so that I wan't to spend many more hours on this.
 
  • Like
Reactions: AlexALXua

porcino

Senior Member
Feb 18, 2011
291
79
...
- Camera in apps like firefox (scan qr) or chrome NOT working properly. It just stuck with first image from it. But with open camera it works just fine.
...

I tried a secure messenger Trifa (TOX network), which uses Barcode Scanner, both from Fdroid repo. This scanner does work with QR codes.

I have a suspicion that in some apps there is a different scanner which uses google services, as it stops working without gapps installed. It is, probably, a good thing, as it helps to identify unsafe apps and break some of their malicious behaviors (use ClassyShark3xodus from Fdroid to see trackers, or spies, embedded in the apps).
 
Last edited:

AlexALXua

Member
Sep 27, 2019
29
7
I have a suspicion that in some apps there is a different scanner which uses google services, as it stops working without gapps installed. It is, probably, a good thing, as it helps to identify unsafe apps and break some of their malicious behaviors (use ClassyShark3xodus from Fdroid to see trackers, or spies, embedded in the apps).
I'm using gapps, just not sure if this is gapps issue (bitgapps) or rom one. And i need to use camera in various apps not just for qr scanner. So i'll be graceful for any tip how to fix those.
There are still parts for nfc missing in the source, it will come sooner or later with the updates,
Oh, ok. Does this also applies for android 11 rom? And how long this usually happens (month/year?).

compass is not working because of a not working hal.
An open source sensor hal is used for this, optimized and overworked for the note 2.
Hm... Ok, so i guess this will be super last thing to fix maybe. Thanks for explanation, not sure if i can somehow help with this.

UPDATE: have few more problems, not sure again is this ROM or gapps:

- already 4th time got all contacts erased from device, can restore from backup but something wrong.
- all apps lost permissions by some reason, needed to allow those again

Please tell me if this is gapps or rom issue so i'll can write in proper topic (bitgapps is thats their issue). Thanks.
 
Last edited:

html6405

Recognized Developer
I'm using gapps, just not sure if this is gapps issue (bitgapps) or rom one. And i need to use camera in various apps not just for qr scanner. So i'll be graceful for any tip how to fix those.
I don't know why the camera doesn't work in some apps for you, I guess that you've granted the permissions?
Oh, ok. Does this also applies for android 11 rom? And how long this usually happens (month/year?).
It should work on android 11.
I can't tell you when there will be the next build and what will be fixed in the next update,
if you need some specific functions, it would be better to use LineageOS 18.1.
Hm... Ok, so i guess this will be super last thing to fix maybe. Thanks for explanation, not sure if i can somehow help with this.
I can't promise if this will ever be fixed, it took already many hours.
- already 4th time got all contacts erased from device, can restore from backup but something wrong.
- all apps lost permissions by some reason, needed to allow those again
Hmm this is a weird behaviour, I hope that your eMMC doesn't drive crazy. I wouldn't blame nobody so far,
backup all your important data and watch it.
 

AlexALXua

Member
Sep 27, 2019
29
7
I don't know why the camera doesn't work in some apps for you, I guess that you've granted the permissions?
Yes, of course, as i said - it even shows first image and then stuck - and there is no buttons to take picture or anything except "back" button. And it seems like in some apps its working, in others - not. Super weird.
I can't tell you when there will be the next build and what will be fixed in the next update,
Ah, so you need to fix this yourself? i thought this is lineage os issue. Gotcha.
I can't promise if this will ever be fixed, it took already many hours.
Hehe, probably this already made everyone crazy :D But i'll still hope that someone will do this eventually! Sadly that i can't help with this, since have no experience with writing firmware/drivers at all.
Hmm this is a weird behaviour, I hope that your eMMC doesn't drive crazy. I wouldn't blame nobody so far,
backup all your important data and watch it.
I had one forced reboot when made nfc tests and phone did freeze completely, i guess permissions was lost after this reboot. As for contacts - still watching, have no any explanation of this yet. But hopefully this is NOT eMMC problems.
f you need some specific functions, it would be better to use LineageOS 18.1.
I'll see, also this time want to provide logs before refrash if will decide that. Maybe this will help somehow to fix some issues.

Thanks for answers! Really appreciate for this.

EDIT: added log when opening camera in FF, hopefully this can help. And will repeat - camera permission is SET, but there is only option "allow only while using app". Added second log for extra app.
 

Attachments

  • camera.zip
    10.7 KB · Views: 4
  • camera2.zip
    29.1 KB · Views: 4
Last edited:
  • Like
Reactions: html6405

porcino

Senior Member
Feb 18, 2011
291
79
Yes, of course, as i said - it even shows first image and then stuck - and there is no buttons to take picture or anything except "back" button. And it seems like in some apps its working, in others - not. Super weird...
In what apps does the camera misbehave? Is it that in some apps it always works well and in the others always freeze?

The camera in this phone is strange. In Trifa it shows correct colours on the same device, but on the remote device the colours are distorted, almost grayscale. Rendering the remote video stream in Note2 is also imperfect - sluggish with artifacts, as if the hardware h.264 codec is not used. It's not a complaint, as the messenger is actually working quite well.
 

GN-z11

Member
Jan 16, 2022
32
7
Just installed it on my Note 2 t0tle (SHV-E250S) by removing few lines at the update-script. This performs a little bit better than older roms maybe due to better non transparent ui. I know I shouldn't submit any bugs but I can't connect to wifi even with correct password. But overall, I can't wait for this to be ported to t0tle.

Edit : I just did, by using Static IP and not DHCP, maybe modem related as this is an LTE device.
 
Last edited:

esysfound

Senior Member
Oct 21, 2017
252
201
Well I took the plunge and am running this -amazing work by HTML6405. A few bumps - had to remove the Ext SD Card to get out of a boot loop but now all good. GPS and Camera seems to be working, SIM card readable. Have to get used to Andr/LinOS 12 menus and especially pull down tabs - seem a step backwards in some ways and wish I could reduce their clunky size. Also cannot find an option to Restart in Recovery during power off - otherways to do this obviously, but it was nice in LinOS 18. Maybe buried in Gestures or the Power button options but I cannot find it. But that the ROM works at all is a real accomplishment. Will see how Battery Use goes over a few days, but this is stable enough so far. Bravo and thanks.
 
  • Like
Reactions: html6405

wiijordends

Senior Member
Jun 21, 2013
72
18
I am writing to you to follow up on my previous post.
I have been using this ROM for almost 2 weeks from clean installed state (not dirty flash).
I am still convinced that this ROM works very stable, smoothly and very snappy.


However, I have discovered new problems that I would like to report.
Some of them are maybe already known.

- Problems when using the microphone in apps:
Note that all permissions are granted, the developer tile for disable sensors is disabled and the new Android 12 camera and mic toggles were enabled!
I discovered this problem when I wanted to make a Signal call with a friend. I can hear and see my receiver and he can see me but cannot hear me. My first impression was that there was permission problem or something wrong with the app, which was not the case. Later this week I wanted to share a voice memo with a colleague on Session. When the app is recording, the app crashes completely. This could not be a coincidence. I tried the in build Google camera and Open Camera to make a video, but as soon as filming is done and therefore the microphone is used, these apps crash.
I also tried Jitsu meeting with app and in the browser. Those apps won't won't crash, just like Signal, but my receiver cannot hear me. This problem even occurs inside the inbuilt voice recorder app.
The microphone in apps is something I use regularly. This is a bit inconvenient.

- Low(er) battery life:
I have the impression that the battery drains very quickly, even when the device is not being used and is in standby.
On a full charge, I can barely get through the day (without charging).
With your 18.1 ROM, my device noticeably lasted much longer.
I even use battery save mode on higher battery percentages in order to prevent this from happening without much effect.
Although this time I started from a clean install, I suspect that this might have something to do with a battery calibration problem?

- No battery charge indication when the phone is turned of while charging:
This low priority problem may be related to LineageOS rather than your ROM.
When the phone is charging while it is turned off, there is not red, yellow or green LED light that indicates the charging progress. In order to know the phone is fully charged, you must press the power button for a short time to bring up a circle with the charging progress on the screen. It won't work by pressing the home button.
It is just a bit inconvenient if I just want to quickly check if my device is fully charged, it has to be done manually.
It is not a big issue.

- Scrolling trough toggles is notification drawer works wonky:
This low priority problem may be related to LineageOS rather than your ROM.
When I try to pull the notification drawer open and navigate horizontally between my quick tiles/toggles, sometimes the side swipe motion doesn't respond.
After a second or third swipe, scrolling between the tiles/toggles often goes very slow. It doesn't feels like the UI that is experiencing difficulties, it feels more like a lag or not responding correctly, than an animation that is not working (animations on x0.5).


My LED blinking issue from my first post is solved after the clean install.
I seldom do a dirty install, but I couldn't backup some important stuff back the then.
After some personal testing, the LED blinking issue was caused by older settings data from 18.1 that caused a conflict on 19.
This caused "battery save mode" to behave in an unexpected way.
Random reboots are still there but occurs less frequently.

I only had 3 random reboots during my whole testing period.
I can't pinpoint the cause but it mostly happens while doing multiple "memory intensive" task.
Like switching between the Brave browser with multiple tabs and a video in the background and Session in a chat with multiple pictures in it. Maybe it has something to do with an out of memory issue, but I should expect that the apps would crash, not the OS?

The theming engine is still broken and I can't change the icon shape on the homescreen.
But I assume that are LineageOS related problems.


Like always, I really appreciate that you make old devices more secure by providing up-to-date degoogled ROMs.
If there are some specific things you like to test, please let me know.
I am happy to help to make your ROM as stable as possible and really appreciate your work.
 
  • Like
Reactions: html6405

esysfound

Senior Member
Oct 21, 2017
252
201
TEXT TO SPEECH?

I need to use this phone as a navigator - I cannot get text to speech to work for voice directions. (Trying to get this to work with MapsMe App -whole point is to do all navigating off line so if it works with e.g. Google Maps, doesn't help me - using with a prepaid SIM with no data and no roaming). I go this to work on Here Maps (older version) but it has a separate downloadable voice file that I don't think works off the system.

Downloaded the Google TTS (as it is ad free) but seems to keep crashing, when I try to set up in the Accessibility settings...This is now called Speech Services - it is the default, and all permissions seem ok. But the ROM choices regarding TTS seem limited and greyed out.

Anyone able to configure and use Speech to Text on this ROM and if so, how? And or must I download some app?

Kind of a big deal. Thanks
 
Last edited:

html6405

Recognized Developer
Ah, so you need to fix this yourself? i thought this is lineage os issue. Gotcha.
Well I don't know so far, it could be fixed from the LineageOS side,
or I have to find a solution (maybe in the hal).
But I also have to find the time to build anyway.
Rendering the remote video stream in Note2 is also imperfect - sluggish with artifacts, as if the hardware h.264 codec is not used.
This could be fixed in the next build.

Thx for your reports.
 
  • Like
Reactions: AlexALXua

AlexALXua

Member
Sep 27, 2019
29
7
Just did tested GPS today - with cold boot (without internet) it did worked successfully (after ~5 mins waiting)! While ~30 minutes had all fine and never had signal issues. So can confirm - GPS is working fine in this ROM.

And small question - is there way to enable back/menu buttons to have LED like was in stock firmware?
 
  • Like
Reactions: html6405

Top Liked Posts

  • 1
    Can n719 intall this rom?
    you can try. it will probably work but with some bugs. if you found any weird stuff please report in this thread.
  • 2
    Last update. random reboots are gone. everything is great ... but ... after a call (incoming or outgoing), the processor frequency does not rise more than 200 MHz, large lags begin. Changing governor doesn't help. reboot helps
    Thanks for your report, I will check this asap,
    some one reported a similar thing on LOS 18.1.
    2
    Refresh link on Mega. please
    Done, there happened a copy / paste problem.
    1
    Update 03.05.2022:
    • Synced with latest LineageOS sources
    • Fixed lags after a phone call
    1
    Refresh link on Mega. please
    1
    @html6405 I managed to solve all those freezing and reeboting issues. Had to perform a factory reset and install everything back again. Now phone is working much better.
  • 9
    Code:
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    *
    */


    Hi,

    here you can find my version for the Samsung Galaxy Note 2 on LineageOS 19.1.
    At first I want to thank @rINanDO, @ChronoMonochrome for all your work which was reused here and helped a lot.

    • Boot
    • Audio
    • Bluetooth
    • Graphics
    • Cameras
    • GPS
    • Wifi
    • USB
    • Video playback (HW/SW)
    • OTA Updates
    • Tethering via USB, WIFI and Bluetooth
    • Sensors
    • RIL
    • NFC
    • Maybe random reboots
    • SD card can't be formated as internal memory, will cause a bootloop
    • Maybe more
    I would recommend to use microG instead of gapps,
    here you can find the installation instructions:
    1. Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
    2. Open Magisk and update the App (and do a reboot if it's asking)
    3. Enable Zygisk in Magisk
    4. Download and install microG installer in the Magisk manager, reboot
    5. Download and install safetynet-fix in the Magisk manager, reboot
    6. Check with a safetynet checker app and you should pass :)

    Wanna improve your sound configs, control your charging current and more?
    Now you can use my app to access all boeffla configurations, there will follow more functions.


    Telegramm group:

    Do you like my work?
    Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
    I'm doing this in my free time and it also costs a lot of money to buy hardware.
    donate

    XDA:DevDB Information
    [ROM][12.x][N7100][BETA] LineageOS 19.1, ROM for the Samsung Galaxy Note 2

    Contributors

    html6405
    Source Code: https://github.com/html6405

    ROM OS Version: 12.x S
    ROM Kernel: Linux 3.x
    ROM Firmware Required: TWRP 3.3.0
    Based On: LineageOS

    Version Information
    Status:
    Beta

    Created 2021-12-30
    Last Updated 2022-05-03
    6
    Update 26.01.2022:
    • Synched with latest LineageOS sources
    • Brought support for Signature Spoofing (MicroG)
    • Disabled AOD by default
    • Fixed video playing in gallery
    • Switched to PegasusPowerHAL
    • Fixed compass sensor
    • Fixed SIM-PIN unlock issue
    3
    You should be able to disable the always on display in the quick settings (AOD) and give your test a retry :).
    Just tried the AOD button: first enabled it and then disabled again... - it worked! Not sure, though, whether any of my previous attempts to modify the settings via adb played any role. I'll repeat timing of the battery with this setting. Thanks.
    3
    Update 08.03.2022:
    • Fixed GPS, 3D fix passes.
    • Synced with LineageOS sources
    2
    Alternative download link for the initial version: