Sure, don't worry, I'm uploading.
但是 出BUG了 我试图修一下
问题很大,相机挂了,等PE修吧。 但是permissive内核上线了,欢迎来测试。
Thanks for your test!PixelExperience_Plus_nx563j-13.0-20230403-1458-UNOFFICIAL NICE.THANKS.
is the NFC work on 2023-03-15 version or 2023-01-30 version.
no idea... I dont know...I've tried installing this. I am using twrp 3.7.0_13, have flashed official firmware 6.28 which boots fine, but then when I flash this ROM and reboot to system it boots back into recovery with the error:
--reason=enablefilecrypto_failed
I have tried formatting the data partition, and messing with dm-verity settings but haven't been able to resolve this.
Any ideas?
I've tried that multiple times and no luck. It seems there is something weird with encryption on my phone. I flashed Lineage 17.1 and that boots fine but when I try flashing anything Android 11/12/13 it now just boots back into twrp with that error. ( I was running an Android 13 ROM for a little while until now and I had tested about ten Android 12/13 ROMs prior to using that one without any problems).no idea... I dont know...
As shown in picture. try to erase Dalvik, Data, Cache, System, Vendor. And reflash the ROM
Z17s is not Z17, the two phones are different.
use official recovery(Nubia ui 5)back to 2.34.i also run into trouble i flashed permissive kernel now i don't can remove red warning the system may work not or boot also when i first flash 6.28 stock any idea?
Which rom , which permissive kernel?Z17s is not Z17, the two phones are different.
look this post https://forum.xda-developers.com/t/...-nubia-z17s-29-01-2023.4546875/#post-88386467
yangcyborg made the lineage ROM for Z17s.
这个boot_permissive确实能起到等同于permissive_v5的作用,但是阻止不了警告的红色字体出现,可能是nipponGSI本身带“毒”,哈哈哈!Which rom , which permissive kernel?
In this post, I give a series of solutions. https://forum.xda-developers.com/t/kernel-permissive-android13-0-nx563j.4571227/
Use the ROM given by me and the permissive kernel given by me. And you can use the permissive kernel and flash GSI...
NOTICE that, just flash kernel is enough, don't flash permissiver_v5.zip
What is your ROM? flash the correct "boot.img" and your phone will be good.
这个boot_permissive确实能起到等同于permissive_v5的作用,但是阻止不了警告的红色字体出现,可能是nipponGSI本身带“毒”,哈哈哈!
This boot_permissive can indeed play a role equivalent to permissive_v5, but it cannot prevent the red font of the warning from appearing. It may be that nipponGSI itself is "poisonous", hahaha
这个boot_permissive确实能起到等同于permissive_v5的作用,但是阻止不了警告的红色字体出现,可能是nipponGSI本身带“毒”,哈哈哈!
This boot_permissive can indeed play a role equivalent to permissive_v5, but it cannot prevent the red font of the warning from appearing. It may be that nipponGSI itself is "poisonous", hahaha!
这个boot_permissive确实能起到等同于permissive_v5的作用,但是阻止不了警告的红色字体出现,可能是nipponGSI本身带“毒”,哈哈哈!
This boot_permissive can indeed play a role equivalent to permissive_v5, but it cannot prevent the red font of the warning from appearing. It may be that nipponGSI itself is "poisonous", hahaha!
我测试刷入Miku-gsi by xiaolegun,感觉很正常啊,使用的内核是kernelsu_permissive,这是一个需要permissive的GSI。有一点BUG但是至少能开机,图片发在酷安@霁月难逢彩云亦散。这个boot_permissive确实能起到等同于permissive_v5的作用,但是阻止不了警告的红色字体出现,可能是nipponGSI本身带“毒”,哈哈哈!
This boot_permissive can indeed play a role equivalent to permissive_v5, but it cannot prevent the red font of the warning from appearing. It may be that nipponGSI itself is "poisonous", hahaha!
我测试刷入Miku-gsi by xiaolegun,感觉很正常啊,使用的内核是kernelsu_permissive,这是一个需要permissive的GSI。有一点BUG但是至少能开机,图片发在酷安@霁月难逢彩云亦散。
你和我用的是一样的底包嘛?peplus 13 20230403? 或者你给我一个你之前能开机的nipponGSI我再深入测试一下?
Ummm, I use this ROM and kernelsu_permissive kernel to flash Miku-GSI by XiaoleGun, it works but a little bug... I post the picture to 酷安@霁月难逢彩云亦散
Do you use the same base ROM as me? peplus 13 20230403? You can give me a good nipponGSI and I test it.
MIKU UI是不需要permissive启动的GSI https://forum.xda-developers.com/t/...roid-10-11-12-13-gsi-ab.4194977/post-88417543我测试刷入Miku-gsi by xiaolegun,感觉很正常啊,使用的内核是kernelsu_permissive,这是一个需要permissive的GSI。有一点BUG但是至少能开机,图片发在酷安@霁月难逢彩云亦散。
你和我用的是一样的底包嘛?peplus 13 20230403? 或者你给我一个你之前能开机的nipponGSI我再深入测试一下?
Ummm, I use this ROM and kernelsu_permissive kernel to flash Miku-GSI by XiaoleGun, it works but a little bug... I post the picture to 酷安@霁月难逢彩云亦散
Do you use the same base ROM as me? peplus 13 20230403? You can give me a good nipponGSI and I test it.
@Tims Fong @jianjin9987哈哈哈。不是很明白,31版本更新日志内核是5.1版本,结果显示还是4.4版本?
Hahaha。 I don’t understand very well, the kernel of the update log of version 31 is version 5.1, but the result shows that it is still version 4.4?
@Tims Fong @jianjin9987哈哈哈。不是很明白,31版本更新日志内核是5.1版本,结果显示还是4.4版本?
Hahaha。 I don’t understand very well, the kernel of the update log of version 31 is version 5.1, but the result shows that it is still version 4.4?