[ROM][UNOFFICIAL][6.0.1][2016.09.28][u1att] CyanogenMod 13 Unofficial Builds

[Nevuly]

CyanogenMod 13 for Galaxy S2​

Disclaimer

/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 *
 * Submitting bug reports on nightly builds is the leading 
 * cause of male impotence.
 */

Supported Device

• SGH-I777 (u1att)

IMPORTANT INFORMATIONS

• Root is now disabled by default on CyanogenMod 13. To enable it go to Settings>Developer Options>Root access and set to Apps only or Apps and ADB.
• If you get an error message when flashing GApps you're probably running out of space in your /system partition. It is recommended to have 1GB to fit the ROM and the GApps ( The stock partition table has 512mb for /system). This thread has a good guide for repartitioning and this one has a great tool for repartitioning without Odin.
• Google is your friend
• DON'T REPLY NFC IS NOT WORK. I TEST IT ABOUT 10 TIMES, AND IT WORKS.
• IF YOU NOT WORK RIL, PLEASE FLASH STOCK JELLYBEAN FIRMWARE. IT'LL BE WORK.

Download

Okay, We are talk about TWRP.

Download TWRP

I uploaded installation guideline on my Homepage.
Please check it out!
Installation Guideline

Basic first time installation instructions:

• Backup your data.
• Download cm-13-XXXXXXXX-UNOFFICIAL-u1att.zip to your sdcard
• Reboot into download mode
• Flash Resize pit in odin.
• Reboot into recovery
• Wipe all your data
• Flash ROM from sdcard
• Flash Google Apps from sdcard (optional)
• Reboot and enjoy!

Freeze! Bug report!

Please use top of Bug reports menu on this thread

Changelogs

2016.09.28

• Merge lastest CM-13.0 source codes.
• Rebased all of source codes, You must Clean Install ROM.
• Use correct code name.
• Fix NFC tiles issues.

2016.08.19

• Merge lastest CM-13.0 source codes.
• Fix battery percentage error.

2016.08.16

• Rebase.

Open Source
https://github.com/CNBLACK-CM
If you want to help me, please request your own commit to add more tweaks, fix bugs, improve source code... etc
It always open to accept your own commit.
CyanogenMod 13.0 Source codes are privated. Because It has some bugs in other Galaxy S2 Family, So I need to fix it. If they are not have any bugs, I'll upload it.

Special Thanks To

• @gsstudios - Introduce Resize Tools
• @Lanchon - Introduce Resize Tools
• @Lysergic Acid - Official CM Maintainer

Donation



If you donation to me, I'll use buy new devices or buy coffee to focus my work

XDA:DevDB Information
CyanogenMod 13 Unoffical Build, ROM for the AT&T Samsung Galaxy S II SGH-I777

Contributors
CNBLACK, Lysergic Acid
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod

Version Information
Status: No Longer Updated
Current Stable Version: 20160928
Stable Release Date: 2016-09-28

Created 2016-07-19
Last Updated 2017-10-20

 

[jasmineloveflower]

i had to use this phone temporary after damaging my note 5 . Anyway i downloaded the cm-13, zImage.tar, but im dont know to what to download from the Resize pit file i went to the link you posted and it talks about the i9100. So if i find the link to download the tar can and it is 9100 can i still install it to a i777.

 

[Nevuly]

i had to use this phone temporary after damaging my note 5 . Anyway i downloaded the cm-13, zImage.tar, but im dont know to what to download from the Resize pit file i went to the link you posted and it talks about the i9100. So if i find the link to download the tar can and it is 9100 can i still install it to a i777.

i9100's resize pit also work on i777.

Because i777, i9100, i9100p, sc02c use same partition.

Or use Lanchon's Resize tool.

It has i777.

 

[jasmineloveflower]

hi are you still online i have been having trouble and others in this forum trying to install 13 but cwm wont dectect my sd card

 

[SteveMurphy]

hi are you still online i have been having trouble and others in this forum trying to install 13 but cwm wont dectect my sd card

You should be using TWRP, since CWM has long been abandoned. Flash the latest and try the ROM again.

 

[zavbvo]

A problem in showing messages body text and Unknown letters in Messages in Arabic Language, and the option to adjust the touch buttons light duration NOT working. And Please A link for Gapps because I tried Pico and Mini Gapps and No Success.

 

[Nevuly]

A problem in showing messages body text and Unknown letters in Messages in Arabic Language, and the option to adjust the touch buttons light duration NOT working. And Please A link for Gapps because I tried Pico and Mini Gapps and No Success.

Arabic language trouble is not my problem. because I just merge from cyanogenmod.
And touch buttons light problem will be check it.
Thanks for feedback

and Please use OpenGapps.

Here is link

P.S. I don't have i777 devices, so I need more time to fix this problem.
Sorry about that. I try to do my best. :/

 

[Nevuly]

hi are you still online i have been having trouble and others in this forum trying to install 13 but cwm wont dectect my sd card

You need to use TWRP or my zImage (Recovery).

Because CWM is so old, And development was stopped.

 

[jasmineloveflower]

yes i was using twrp however the cm overrides it and puts cwm back on.

 

[d_j_l]

I have trouble to use twrp in your zimage. see attached pictures. Any idea?

 

[Nevuly]

I have trouble to use twrp in your zimage. see attached pictures. Any idea?

Don't flash zImage in TWRP recovery.

You just use TWRP, and TWRP can flash it.

Are you use isorec recovery?

 

[d_j_l]

Don't flash zImage in TWRP recovery.

You just use TWRP, and TWRP can flash it.

Are you use isorec recovery?

I used odin to flash your zimage and later I tried TWRP recovery by Lanchon which is the only one I found for i777. Lanchon's recovery is isorec, I believe.

 

[Nevuly]

I used odin to flash your zimage and TWRP recovery by Lanchon which is the only one I found for i777. Lanchon's recovery is isorec, I believe.

Please use one recovery.

I recommand to use isorec recovery

 

[yosmokinman]

^I had that same ****ed up twrp after Lanchon had me run some script. Could never fix it. Even after flashing stock with odin. But it doesn't matter.

You can flash the official i9100 twrp with odin then flash Lanchons "twrp makeover" zip to let it flash i777 zips.

Of course you need an isorec kernel which I assume this rom includes since it was merged into cm.

 

[Nevuly]

^I had that same ****ed up twrp after Lanchon had me run some script. Could never fix it. Even after flashing stock with odin. But it doesn't matter.

You can flash the official i9100 twrp with odin then flash Lanchons "twrp makeover" zip to let it flash i777 zips.

Of course you need an isorec kernel which I assume this rom includes since it was merged into cm.

Humm.. Can you flash my zImage in your device?

Maybe my zImage will be work.

And Please clean up your recovery partition. Isorec will be flash in your recovery partition.

 

[Nevuly]

August Security patch released.

 

[d_j_l]

August Security patch released.

negative battery percentage , same as reported on i9100 http://forum.xda-developers.com/showpost.php?p=68211485&postcount=5786
The fix: http://forum.xda-developers.com/showpost.php?p=68228131&postcount=5802
Do you mind to rebuild?
Thanks.

 

[yosmokinman]

Humm.. Can you flash my zImage in your device?

Maybe my zImage will be work.

And Please clean up your recovery partition. Isorec will be flash in your recovery partition.

Well everything works now or did a month or so ago when I got rid of this device so I can't do any testing, sorry. But I did have the same isorec twrp problem so I was trying to help the guy out.

Formatting the recovery partition and reflashing didn't fix what once worked (yet the isorec cwm did work, weird). That was Lanchons/cyrils 2.8.7.0 I think. Is yours v3? I could never get the isorec v2 working again after it broke.

To clarify my previous post you can't flash the official i9100 twrp.img with odin. I meant if you have a broken recovery like that you can flash an odin flashable kernel then from that flash another non-isorec kernel with a newer twrp like cyrils omni kernel.

Theeeen, from that flash the i9100 3.0.2-1 twrp.img and the makeover zip. Now you have a working isorec twrp in the recovery partition. Flash the rom.

Yeah I know but that's how I fixed it when my twrp was messed up like the guy aboves.

Edit: Didn't notice same guy above lol how'd ya get that twrp fixed man? Did it just start working or the new zImage I guess? Cool.

 

[d_j_l]

Well everything works now or did a month or so ago when I got rid of this device so I can't do any testing, sorry. But I did have the same isorec twrp problem so I was trying to help the guy out.

Formatting the recovery partition and reflashing didn't fix what once worked (yet the isorec cwm did work, weird). That was Lanchons/cyrils 2.8.7.0 I think. Is yours v3? I could never get the isorec v2 working again after it broke.

To clarify my previous post you can't flash the official i9100 twrp.img with odin. I meant if you have a broken recovery like that you can flash an odin flashable kernel then from that flash another non-isorec kernel with a newer twrp like cyrils omni kernel.

Theeeen, from that flash the i9100 3.0.2-1 twrp.img and the makeover zip. Now you have a working isorec twrp in the recovery partition. Flash the rom.

Yeah I know but that's how I fixed it when my twrp was messed up like the guy aboves.

Edit: Didn't notice same guy above lol how'd ya get that twrp fixed man? Did it just start working or the new zImage I guess? Cool.

TWRP 2.8.7.0 never works for me, no matter it is on CM12.1 or CM13. I had to adb TWRP 3.0.2-1 to install cm13.

 

[Nevuly]

Battery percentage error fix released. Now it go to stable